- 10 Jul, 2020 21 commits
-
-
Sam Ravnborg authored
Now that dt-extract-example gained support for using root nodes in examples, update the example for the simple-frambuffer binding to use it. This gives us a better example and kill a long standing warning: simple-framebuffer.example.dts:23.16-39.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Note: To get the update dt-extract-example execute: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade v2: - fix spelling of framebuffer (Geert) - drop stdout-path (Rob) Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Rob Herring <robh@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200704143544.789345-2-sam@ravnborg.org
-
Sam Ravnborg authored
This binding describes a panel with a secondary channel. v3: - Add reg property and unit-address to dsi nodes (Rob) v2: - add check for required properties if link2 is present (Rob) Signed-off-by:
-
Sam Ravnborg authored
v2: - Add missing types (Rob) - Fix example to specify panel@0 (Rob) Signed-off-by:
-
Sam Ravnborg authored
As the binding matches panel-simple-dsi, added the compatible to the panel-simple-dsi list. With this change enable-gpios is now optional. v2: - It is a DSI panel, add it to panel-simple-dsi (Rob) Signed-off-by:
-
Suraj Upadhyay authored
Change logging information from dev_info() to drm_info(). Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
-
Suraj Upadhyay authored
Convert logging errors from dev_err() to drm_err(). Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Liu Ying authored
It doesn't hurt to add the bridge in the global bridge list also for platform specific dw-hdmi drivers which are based on the component framework. This can be achieved by moving the drm_bridge_add() function call from dw_hdmi_probe() to __dw_hdmi_probe(). A counterpart movement for drm_bridge_remove() is also needed then. Moreover, since drm_bridge_add() initializes &bridge->hpd_mutex, this may help those platform specific dw-hdmi drivers(based on the component framework) avoid accessing the uninitialized mutex in drm_bridge_hpd_notify() which is called in dw_hdmi_irq(). Putting drm_bridge_add() in __dw_hdmi_probe() just before it returns successfully should bring no logic change for platforms based on the DRM bridge API, which is a good choice from safety point of view. Also, __dw_hdmi_probe() is renamed to dw_hdmi_probe() since dw_hdmi_probe() does nothing else but calling __dw_hdmi_probe(). Similar renaming applies to the __dw_hdmi_remove()/dw_hdmi_remove() pair. Fixes: ec971aaa ("drm: bridge: dw-hdmi: Make connector creation optional") Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
Liu Ying authored
It's unnecessary to cleanup the i2c adapter and the ddc pointer in the bailout path of __dw_hdmi_probe(), since the adapter is not added and the ddc pointer is not set. Fixes: a23d6265 ("drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function") Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: dri-devel@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Evgeny Novikov authored
If smtcfb_pci_probe() does not detect a valid chip it cleans up everything and returns 0. This can result in various bad things later. The patch sets the error code on the corresponding path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200706155328.8396-1-novikov@ispras.ru
-
Evgeny Novikov authored
fb_probe() can successfully allocate a new frame buffer, but then fail to perform some operations with regulator. In these cases fb_probe() goes to label err_pm_runtime_disable where the frame buffer is not released. The patch makes fb_probe() to go to label err_release_fb on corresponding error handling paths. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Rikard Falkeborn authored
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 25509 7928 64 33501 82dd drivers/video/fbdev/vt8623fb.o After: text data bss dec hex filename 26533 6904 64 33501 82dd drivers/video/fbdev/vt8623fb.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Adam Ford authored
The drm/omap driver was fixed to correct an issue where using a divider of 32 breaks the DSS despite the TRM stating 32 is a valid number. Through experimentation, it appears that 31 works, and it is consistent with the value used by the drm/omap driver. This patch fixes the divider for fbdev driver instead of the drm. Fixes: f76ee892 ("omapfb: copy omapdss & displays for omapfb") Cc: <stable@vger.kernel.org> #4.5+ Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Rob Clark <robdclark@gmail.com> [b.zolnierkie: mark patch as applicable to stable 4.5+ (was 4.9+)] Signed-off-by:
-
Aditya Pakki authored
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Cc: kjlu@umn.edu Cc: wu000273@umn.edu Cc: Allison Randal <allison@lohutok.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Enrico Weigelt <info@metux.net> cc: "Andrew F. Davis" <afd@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Evgeny Novikov authored
neofb_probe() calls neo_scan_monitor() that can successfully allocate a memory for info->monspecs.modedb and proceed to case 0x03. There it does not free the memory and returns -1. neofb_probe() goes to label err_scan_monitor, thus, it does not free this memory through calling fb_destroy_modedb() as well. We can not go to label err_init_hw since neo_scan_monitor() can fail during memory allocation. So, the patch frees the memory directly for case 0x03. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Evgeny Novikov authored
savagefb_probe() calls savage_init_fb_info() that can successfully allocate memory for info->pixmap.addr but then fail when fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and does not free allocated memory. It is not valid to go to label failed_mmio since savage_init_fb_info() can fail during memory allocation as well. So, the patch free allocated memory on the error handling path in savage_init_fb_info() itself. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Use array3_size() helper instead of the open-coded version in scr_memcpyw() and scr_memsetw(). These sorts of multiplication factors need to be wrapped in array3_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Since we lack the hardware (or proper emulator setup) for testing needed changes add FIXMEs to document the issues (so at least they are not forgotten). Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
On 5/14/20 10:21 PM, Geert Uytterhoeven wrote: > These #ifdefs are relics from APUS (Amiga Power-Up System), which > added a PPC board. APUS support was killed off a long time ago, > when arch/ppc/ was still king, but these #ifdefs were missed, because > they didn't test for CONFIG_APUS. Add FIXME about using the C code variants (APUS ones) in the future. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Reported-by:
-
- 09 Jul, 2020 4 commits
-
-
Ville Syrjälä authored
Drop some pointless curly braces, and add some across the else when the if has them too. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-3-ville.syrjala@linux.intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com>
-
Ville Syrjälä authored
Apparently there are EDIDs in the wild with multiple DispID extension blocks. Iterate through them all. In one particular case the tile information is specicied in the second DispID ext block, and since the current parser only looks at the first DispID ext block we don't notice that we're dealing with a tiled display. While at it change a few functions to return void since we have no use for the errno. References: https://gitlab.freedesktop.org/drm/intel/-/issues/27Signed-off-by:
-
Ville Syrjälä authored
Apparently EDIDs with multiple DispID ext blocks is a thing, so prepare for iterating through multiple ext blocks of the same type by passing the starting ext block index to drm_find_edid_extension(). Well also have drm_find_edid_extension() update the index to point to the next ext block on success. Thus we should be able to call drm_find_edid_extension() in loop. Signed-off-by:
-
Ville Syrjälä authored
To make it easier to figure out what caused a particular debug message let's print out aux->name. v2: Convert drm_dp_send_real_edid_checksum() too Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
- 08 Jul, 2020 3 commits
-
-
Chris Wilson authored
drm_gem_dumb_map_offset() now exists and does everything vgem_gem_dump_map does and *ought* to do. In particular, vgem_gem_dumb_map() was trying to reject mmapping an imported dmabuf by checking the existence of obj->filp. Unfortunately, we always allocated an obj->filp, even if unused for an imported dmabuf. Instead, the drm_gem_dumb_map_offset(), since commit 90378e58 ("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the obj->import_attach to reject such invalid mmaps. This prevents vgem from allowing userspace mmapping the dumb handle and attempting to incorrectly fault in remote pages belonging to another device, where there may not even be a struct page. v2: Use the default drm_gem_dumb_map_offset() callback Fixes: af33a919 ("drm/vgem: Enable dmabuf import interfaces") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.13+ Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk
-
Marek Vasut authored
Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise the LTDC might suspend via runtime PM, disable clock, and then fail to resume later on. The test which triggers it is roughly -- run qt5 application which uses eglfs platform and etnaviv, stop the application, sleep for 15 minutes, run the application again. This leads to a timeout waiting for vsync, because the LTDC has suspended, but did not resume. Fixes: 35ab6cfb ("drm/stm: support runtime power management") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Yannick Fertré <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> To: dri-devel@lists.freedesktop.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Acked-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
Yannick Fertre <yannick.fertre@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de
-
Yannick Fertre authored
It is not necessary to suspend or stop the ltdc clocks to modify the pixel clock. Signed-off-by:
-
- 07 Jul, 2020 12 commits
-
-
Neil Armstrong authored
The recent GCC compiler is very picky with the VD_H_START() and AFBC_DEC_PIXEL_BGN_H() macros, triggering a runtime assert error as: In function 'meson_overlay_setup_scaler_params', inlined from 'meson_overlay_atomic_update' at drivers/gpu/drm/meson/meson_overlay.c:542:2: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_341' declared with attribute error: FIELD_PREP: value too large for the field drivers/gpu/drm/meson/meson_overlay.c:413:4: note: in expansion of macro 'AFBC_DEC_PIXEL_BGN_H' 413 | AFBC_DEC_PIXEL_BGN_H(hd_start_lines - afbc_left) | | ^~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_401' declared with attribute error: FIELD_PREP: value too large for the field It's not expected to overflow these fields, but the compiler did find a case where it overflows. We can safely ignore this, so mask the value with the field width. Fixes: e860785d ("drm/meson: overlay: setup overlay for Amlogic FBC") Signed-off-by:Neil Armstrong <narmstrong@baylibre.com> Acked-by:
-
Thomas Zimmermann authored
There's modesetting init code in ast_main.c. Move it to ast_mode.c and merge it with the modesetting init code in ast_mode_init(). The result is ast_mode_config_init(), which initalizes the whole modesetting. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Thomas Zimmermann authored
Using drmm_mode_config_init() sets up managed release of modesetting resources. The existing modesetting's finalizer is empty, so remove it. Signed-off-by:
-
Thomas Zimmermann authored
Struct ast_crtc has been cleaned up and it's now a wrapper around the DRM CRTC structure struct drm_crtc. This patch converts the driver to struct drm_crtc and removes struct ast_crtc. Signed-off-by:
-
Thomas Zimmermann authored
The cursor helpers reserve buffer objects in VRAM and update their content. So although tied to modesetting, cursor helpers are more of a memory manager. The modesetting's cursor plane requires this functionality, so initialize cursors before modesetting. While at it, also add an error check for ast_cursor_init(). Signed-off-by:
-
Thomas Zimmermann authored
Register a release function to finalize cursors. The _fini() function gets un-exported from the source file. The function ast_mode_fini() is now empty and will be removed by a later patch. Signed-off-by:
-
Thomas Zimmermann authored
Updating the image in a cursor's HW BO requires a mapping of the BO's buffer in the kernel's address space. Cursor image updates can happen frequently and create CPU overhead. As cursor HW BOs are small and never move, they are now map exactly once during the initialization and the mapping is used throughout the driver's lifetime. This change also removes a possible source of failures from ast_cursor_show(). As the helper does not establish mappings, it cannot fail. As a result, the cursor plane's atomic-update helper does not call any failable interfaces. All failures are detected before trying to update the cursor plane. Signed-off-by:
-
Thomas Zimmermann authored
As the inverse to ast_cursor_show(), ast_cursor_hide() disables the HW cursor. Signed-off-by:
-
Thomas Zimmermann authored
The ast_cursor_show() helper enables the cursor to be displayed. No need to repeat that operation in the plane's atomic-update function. Signed-off-by:
-
Thomas Zimmermann authored
Having a cursor move function is misleading, as it actually enables the cursor's image for displaying. So rename it to ast_cursor_show(). It's semantics is to show a cursor at the specified location on the screen. The displayed cursor is always the image in the cursor front BO. This change also simplifies struct ast_crtc to being a mere wrapper around around struct drm_crtc. It will be removed by a later patch. Signed-off-by:
-
Thomas Zimmermann authored
The new helper ast_cursor_page_flip() switches the cursor's front and back BOs. This simplifies the cursor plane's update helper. Signed-off-by:
-
Thomas Zimmermann authored
Cursor image and checksum go hand in hand. Update both in the same place. The helper cannot fail, so remove the return type. Signed-off-by:
-
