- 20 Apr, 2021 7 commits
-
-
Kuninori Morimoto authored
graph_parse_mclk_fs() has "node", but is not used. This patch removes unused "node" Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tuo33ubl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
No upstream code is using "audio-graph-card," preix, and Yaml base Document doesn't indicate it. Let's remove it. Signed-off-by:
-
Kuninori Morimoto authored
"endpoint" and "port" are always exists, but there is no guarantee for "ports". This patch checks "ports" if exists, otherwise, it might set un-expected settings. This patch also do align to 100 char in 1 line. Signed-off-by:
-
Kuninori Morimoto authored
audio-graph-card2 can reuse audio_graph_remove() / asoc_simple_remove(). This patch moves it to simple-card-utils.c. Signed-off-by:
-
Kuninori Morimoto authored
audio-graph-card2 can reuse audio_graph_card_probe(). This patch moves it to simple-card-utils.c. Signed-off-by:
-
Thierry Reding authored
struct link_info can grow fairly large and may cause the stack frame size to be exceeded when allocated on the stack. Some architectures such as 32-bit ARM, RISC-V or PowerPC have small stack frames where this causes a compiler warning, so allocate these structures on the heap instead of the stack. Fixes: 343e55e7 ("ASoC: simple-card-utils: Increase maximum number of links to 128") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-by:
-
Jack Yu authored
Add support on format S32_LE for rt1015p. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/377f0ee05d514c66b567eb6385ac7753@realtek.comSigned-off-by:
-
- 19 Apr, 2021 14 commits
-
-
Mark Brown authored
Merge series "ASoC: rt286/rt298: Fixes for DMIC2 config and combo jack" from David Ward <david.ward@gatech.edu>: The last two patches in this series fix a longstanding issue that prevented the ALC3263 codec from using a headset mic. This codec can be found on Dell systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343. In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use legacy HD Audio just to avoid this issue: https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/ This may allow that ACPI quirk to be removed. Either way, the other systems mentioned above do not support this quirk and already use the ASoC driver, so this fix is necessary for headset mic support on those systems. Note: there is likely other handling for this codec that only exists in the HDA driver, but which also belongs in the ASoC driver. Commit 394c97f8 ("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that does not seem to be resolved in the ASoC driver, to give an example. Other patches in this series are not specific to the ALC3263. These patches set the correct combo jack configuration when headphones are inserted, and fix a misaligned value set in the DMIC2 Configuration Default register. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961Signed-off-by:
David Ward <david.ward@gatech.edu> David Ward (5): ASoC: rt286: Fix upper byte in DMIC2 configuration ASoC: rt286: Configure combo jack for headphones ASoC: rt298: Configure combo jack for headphones ASoC: rt286: Make RT286_SET_GPIO_* readable and writable ASoC: rt286: Generalize support for ALC3263 codec sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++------------- sound/soc/codecs/rt298.c | 9 +++++++-- 2 files changed, 28 insertions(+), 15 deletions(-) -- 2.31.1
-
David Ward authored
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350 and Venue 11 Pro 7140. They require the same handling for the combo jack to work with a headset: GPIO pin 6 must be set. The HDA driver always sets this pin on the ALC3263, which it distinguishes by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028 (Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to determine if Dell is the system vendor. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.eduSigned-off-by:
-
David Ward authored
During jack detection, the combo jack is configured for a CTIA headset, and then for an OMTP headset, while sensing the mic connection. If a mic is not found in either case, the combo jack should be re-configured for headphones only. This is consistent with the HDA driver behavior. Signed-off-by:
-
David Ward authored
During jack detection, the combo jack is configured for a CTIA headset, and then for an OMTP headset, while sensing the mic connection. If a mic is not found in either case, the combo jack should be re-configured for headphones only. This is consistent with the HDA driver behavior. Signed-off-by:
-
Niklas Carlsson authored
The ALSA control readback functionality only works for non-volatile controls, i.e. control values that does not change on their own without driver interaction. This doesn't work for readbacks since the DSP firmware updates the control value. Disable the cache mechanism in the driver if the control name matches the prefix used for readbacks to ensure that the control value is valid. Signed-off-by:
Niklas Carlsson <niklasc@axis.com> Link: https://lore.kernel.org/r/20210419144901.9441-1-Niklas.Carlsson@axis.comSigned-off-by:
-
David Ward authored
The GPIO configuration cannot be applied if the registers are inaccessible. This prevented the headset mic from working on the Dell XPS 13 9343. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171Signed-off-by:
-
David Ward authored
This HDA verb sets the upper byte of the Configuration Default register, so only an 8-bit value should be used. For the rt298, the same fix was applied in commit f8f2dc4a ("ASoC: rt298: fix wrong setting of gpio2_en"). Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: remove more cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: I missed those warnings in the previous rounds, they are mostly trivial and shouldn't change the behavior. Pierre-Louis Bossart (5): ASoC: soc-acpi: remove useless initialization ASoC: soc-core: fix signed/unsigned issue ASoC: soc-core: fix always-false condition ASoC: codecs: lpass-rx-macro: remove useless return ASoC: codecs: rt5682: clarify expression sound/soc/codecs/lpass-rx-macro.c | 2 -- sound/soc/codecs/rt5682.c | 2 +- sound/soc/soc-acpi.c | 2 +- sound/soc/soc-core.c | 7 +------ 4 files changed, 3 insertions(+), 10 deletions(-) -- 2.25.1
-
Viorel Suman authored
check the return value of ak4458_rstn_control. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1618826072-29344-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/rt5682.c:2404:42: style: Boolean result is used in bitwise operation. Clarify expression with parentheses. [clarifyCondition] (pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST)); ^ Signed-off-by:Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210416191144.27006-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/lpass-rx-macro.c:1626:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/codecs/lpass-rx-macro.c:1623:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/codecs/lpass-rx-macro.c:1626:9: note: Returning identical expression 'ret' return ret; ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/soc-core.c:2784:6: style: Condition '!num_routes' is always false [knownConditionTrueFalse] if (!num_routes) { ^ sound/soc/soc-core.c:2777:17: note: Assuming that condition 'num_routes<0' is not redundant if (num_routes < 0 || num_routes & 1) { ^ sound/soc/soc-core.c:2783:2: note: Compound assignment '/=', assigned value is 0 num_routes /= 2; ^ sound/soc/soc-core.c:2784:6: note: Condition '!num_routes' is always false if (!num_routes) { ^ The documentation for of_property_count_string reads " * Returns the number of strings on * success, -EINVAL if the property does not exist, -ENODATA if property * does not have a value, and -EILSEQ if the string is not null-terminated * within the length of the property data. " Since the case for num_routes == 0 is not possible, let's remove this test. Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/soc-core.c:2237:13: warning: %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. [invalidScanfArgType_int] } else if (sscanf(name, "%x-%x", &id1, &id2) == 2) { ^ sound/soc/soc-core.c:2237:13: warning: %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. [invalidScanfArgType_int] } else if (sscanf(name, "%x-%x", &id1, &id2) == 2) { ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: value that is never used. [unreadVariable] acpi_status status = AE_OK; ^ sound/soc/soc-acpi.c:37:21: style: Variable 'status' is assigned a Signed-off-by:
-
- 16 Apr, 2021 16 commits
-
-
Rob Herring authored
This reverts commit e61c5895. The binding document has lots of schema errors and there's been no effort to fix them, so let's remove it. Cc: Argus Lin <argus.lin@mediatek.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: alsa-devel@alsa-project.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210416180118.3662904-1-robh@kernel.orgSigned-off-by:
-
Jack Yu authored
Using new kcontrols "Capture Switch" and "Capture Volume" instead, remove kcontrols which no longer be used. Signed-off-by:
-
Jack Yu authored
Add main capture switch and main capture volume control. Main capture control has its own channel value respectivelly. Signed-off-by:
-
Jack Yu authored
Modification for code simplicity. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: Intel: add new TGL/ADL configurations" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Very little code but quite a few descriptors to add TigerLake (TGL) /AlderLake (ADL) ACPI match tables for I2S and SoundWire devices, new dailinks for Bluetooth offload. Some day this will be read from platform firmware. Also clarify how microphones are handled for SoundWire devices, and create modules to avoid linking the same code multiple times. Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: add ADL SoundWire base configurations ASoC: Intel: soc-acpi: add ADL jack-less SoundWire configurations ASoC: Intel: sof_sdw: add mutual exclusion between PCH DMIC and RT715 ASoC: Intel: boards: handle hda-dsp-common as a module ASoC: Intel: boards: create sof-maxim-common module Vamshi Krishna Gopal (3): ASoC: Intel: soc-acpi: add entries for i2s machines in ADL match table ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp ASoC: Intel: boards: add support for adl boards in sof-rt5682 Yong Zhi (1): ASoC: Intel: Boards: tgl_max98373: Add BT offload support sound/soc/intel/boards/Kconfig | 18 ++ sound/soc/intel/boards/Makefile | 28 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 1 + sound/soc/intel/boards/bxt_rt298.c | 1 + sound/soc/intel/boards/cml_rt1011_rt5682.c | 1 + sound/soc/intel/boards/ehl_rt5660.c | 1 + sound/soc/intel/boards/glk_rt5682_max98357a.c | 1 + sound/soc/intel/boards/hda_dsp_common.c | 5 + sound/soc/intel/boards/skl_hda_dsp_generic.c | 1 + sound/soc/intel/boards/sof_da7219_max98373.c | 1 + sound/soc/intel/boards/sof_maxim_common.c | 24 +- sound/soc/intel/boards/sof_maxim_common.h | 6 +- sound/soc/intel/boards/sof_pcm512x.c | 1 + sound/soc/intel/boards/sof_rt5682.c | 67 ++++- sound/soc/intel/boards/sof_sdw.c | 32 ++- sound/soc/intel/boards/sof_sdw_common.h | 1 + sound/soc/intel/boards/sof_sdw_max98373.c | 4 +- .../intel/common/soc-acpi-intel-adl-match.c | 249 ++++++++++++++++++ 18 files changed, 415 insertions(+), 27 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: soc-pcm: ignore dummy-DAI at soc_pcm_params_symmetry()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I noticed if we have... 1) Sound Card used DPCM 2) It exchanges rate to 48kHz by using .be_hw_params_fixup() 3) Codec had symmetric_rate = 1 We will get below error. I didn't confirm, but maybe same things happen if it exchanged channels/sample_bits. # aplay 44100.wav # aplay 44100.wav => [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000 [kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22 [kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22 aplay: set_params:1407: Unable to install hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: 44100 PERIOD_TIME: (23219 23220) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 4 BUFFER_TIME: (92879 92880) BUFFER_SIZE: 4096 BUFFER_BYTES: 16384 TICK_TIME: 0 This patch-set solves this issue. patch 1) - 3) are just cleanup patches. 4) is fot this issue. Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (4): ASoC: soc-pcm: don't use "name" on __soc_pcm_params_symmetry() macro ASoC: soc-pcm: indicate DAI name if soc_pcm_params_symmetry() failed ASoC: soc-utils: add snd_soc_component_is_dummy() ASoC: soc-pcm: ignore dummy-DAI at soc_pcm_params_symmetry() include/sound/soc-component.h | 1 + sound/soc/soc-core.c | 2 +- sound/soc/soc-pcm.c | 14 ++++++++------ sound/soc/soc-utils.c | 6 ++++++ 4 files changed, 16 insertions(+), 7 deletions(-) -- 2.25.1
-
Thierry Reding authored
On Tegra186 and later, the number of links can go up to 72, so bump the maximum number of links to the next power of two (128). Fixes: f2138aed ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform") Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
-
Thierry Reding authored
The DAI counting code doesn't propagate errors when the number of maximum links is exceeded, which causes subsequent initialization code to continue to run and that eventually leads to memory corruption with the code trying to access memory that is out of bounds. Fix this by propagating errors when the maximum number of links is reached, which ensures that the driver fails to load and prevents the memory corruption. Fixes: f2138aed ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform") Signed-off-by:
-
Kuninori Morimoto authored
soc_pcm_params_symmetry() checks CPU / Codec symmetry. Unfortunately there was bug on it (= A) which didn't check Codec. But is back by (B). A: v5.7: commit c840f769 ("ASoC: soc-pcm: Merge for_each_rtd_cpu/codec_dais()") B: v5.12: commit 3a906721 ("ASoC: soc-pcm: cleanup soc_pcm_params_symmetry()") In total, old - v5.6 (= Generation-1): symmetric_rate : DAI_Link / CPU / Codec symmetric_channels : DAI_Link / CPU / Codec symmetric_sample_bits : DAI_Link / CPU / Codec v5.7 - v5.11 (= Generation-2): (= because of bug by (A)) symmetric_rate : DAI_Link / CPU symmetric_channels : DAI_Link / CPU / Codec symmetric_sample_bits : DAI_Link / CPU / Codec v5.12 - (= Generation-3): (= back by (B)) symmetric_rate : DAI_Link / CPU / Codec symmetric_channels : DAI_Link / CPU / Codec symmetric_sample_bits : DAI_Link / CPU / Codec OTOH, we can use DPCM which is configured by FE / BE. Both FE / BE uses dummy-DAI. FE: CPU <-> dummy-DAI BE: dummy-DAI <-> Codec One note is that we can use .be_hw_params_fixup in DPCM case. This means BE settings might be fixuped/updated by FE. This feature is used for example on MIXer case. It can be happen not only for rate, but for channels/sample_bits too. Because of these reasons, below issue happen on Generation-1 / Generation-3, if... 1) Sound Card used DPCM 2) It exchanges rate to 48kHz by using .be_hw_params_fixup() 3) Codec had symmetric_rate = 1 I didn't confirm, but maybe same things happen if it exchanged channels/sample_bits at Generation-1/2/3 too. # aplay 44100.wav # aplay 44100.wav => [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000 [kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22 [kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22 aplay: set_params:1407: Unable to install hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: 44100 PERIOD_TIME: (23219 23220) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 4 BUFFER_TIME: (92879 92880) BUFFER_SIZE: 4096 BUFFER_BYTES: 16384 TICK_TIME: 0 soc_pcm_params_symmetry() checks by below if (symmetry) for_each_rtd_cpu_dais(rtd, i, cpu_dai) if (cpu_dai->xxx && cpu_dai->xxx != d.xxx) { dev_err(rtd->dev, "..."); return -EINVAL; } Because of above reason 3) (= Codec had symmetric_rate = 1) BE can't ignore "if (symmetric)". At 1st aplay, soc_pcm_params_symmetry() ignores it, because dummy-DAI->rate is 0. After this check, each DAI sets/keep settings. In above sample case, BE gets 48000 and FE gets 44100, and it happen BE -> FE order. Because DPCM is sharing *same* dummy-DAI, dummy-DAI sets as 48000 by BE, and is overwrote by 44100 by FE. This settings never be cleaned (= a) after 1st aplay, because dummy-DAI is used from FE/BE, never be last user (b). static int soc_pcm_hw_clean(...) { ... for_each_rtd_dais(rtd, i, dai) { ... (b) if (snd_soc_dai_active(dai) == 1) (a) soc_pcm_set_dai_params(dai, NULL); ... } ... } At 2nd aplay, BE gets 48000 but dummy-DAI is keeping 44100, soc_pcm_params_symmetry() checks will fail. To solve this issue, this patch ignores dummy-DAI at soc_pcm_params_symmetry() Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
There is snd_soc_dai_is_dummy(), but not for component. This patch adds it. Signed-off-by:
-
Kuninori Morimoto authored
It indicates unmatched symmetry value, but not indicates on which DAI. This patch indicates it. Signed-off-by:
-
Kuninori Morimoto authored
__soc_pcm_params_symmetry() macro is using "name" as parameter which will be exchanged to rate/channles/sample_bit, like below dai->name => dai->rate dai->name => dai->channels dai->name => dai->sample_bit But, dai itself has "name". This means 1) It is very confusable naming 2) It can't use dai->name This patch use "xxx" instead of "name" Signed-off-by:
-
Daniel Baluta authored
A DAI link has 3 components: * CPU * platform * codec(s) A component is specified via: * name * of_node * dai_name In order to avoid confusion when building a sound card we disallow matching by both name and of_node (1). soc_check_tplg_fes allows overriding certain BE links by overriding BE link name. This doesn't work well if BE link was specified via DT, because we end up with a link with both name and of_node specified which is conflicting with (1). In order to fix this we need to: * override of_node if component was specified via DT * override name, otherwise. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20210414101212.65573-1-daniel.baluta@oss.nxp.comSigned-off-by:
-
Vamshi Krishna Gopal authored
Add quirks for jack detection, rt711 DAI and DMIC Reviewed-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Add one configuration with no RT711. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Libin Yang <libin.yang@intel.com> Link: https://lore.kernel.org/r/20210415175013.192862-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add configurations ported over from TGL. The topology names need to include link information given all the hardware permutations. Signed-off-by:
-
- 15 Apr, 2021 3 commits
-
-
Ranjani Sridharan authored
Recently, the sof_pcm_dai_link_fixup() function was updated to match SSP config with the PCM hw_params and set the current_config for the DAI widget. But the sof_restore_pipelines() function still chooses the default config for the DAI widget upon resuming. Fix this to use the last used config when setting up the DAI widget during resume. Fixes: c943a586 ("ASoC: SOF: match SSP config with pcm hw params") Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: simple-card/audio-graph: adjust to multi CPU/Codec" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These patches adjusts to multi CPU/Codec on simple-card / audio-graph. This is part of prepare for new audio-graph-card2. Kuninori Morimoto (5): ASoC: simple-card: remove unused variable from simple_parse_of() ASoC: simple-card: use asoc_link_to_xxx() macro ASoC: simple-card: use simple_props_to_xxx() macro ASoC: audio-graph: use asoc_link_to_xxx() macro ASoC: audio-graph: use simple_props_to_xxx() macro sound/soc/generic/audio-graph-card.c | 43 +++++++++++++----------- sound/soc/generic/simple-card.c | 50 +++++++++++++--------------- 2 files changed, 47 insertions(+), 46 deletions(-) -- 2.25.1
-
Guangqing Zhu authored
Coccinelle noticed: sound/soc/codecs/wcd934x.c:5041:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by:
Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210415073829.22750-1-zhuguangqing83@gmail.comSigned-off-by:
-
