arm64: dts: ZynqMP DT changes for v5.16-v2

- Add support for Kria SOM board

* tag 'zynqmp-dt-for-v5.16-v2' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Add support for Xilinx Kria SOM board

Link: https://lore.kernel.org/r/9815867c-ffbb-fc9d-64b9-badee5e2862b@xilinx.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.16

  - Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
    H3Ne SoCs and boards.

* tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards

Link: https://lore.kernel.org/r/cover.1633081158.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.16

  - I2C EEPROM support on the RZA2MEVB development board,
  - DMA, USB2.0, and audio support for the RZ/G2L SoC,
  - USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
    development board,
  - Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
    H3Ne),
  - PWM support for the R-Car M3-W+ and V3U SoCs,
  - IPMMU support for SDHI on the R-Car V3U SoC,
  - Switches support for the Falcon development board,
  - Improve Ethernet PHY descriptions to fix reset handling after kexec,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (45 commits)
  arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets
  ARM: dts: rzg1: Add missing Ethernet PHY resets
  ARM: dts: r-mobile: Add missing Ethernet PHY resets
  arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
  arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
  arm64: dts: renesas: Add compatible properties to AR8031 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to RTL8201FL Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ8081 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs
  arm64: dts: renesas: beacon: Fix Ethernet PHY mode
  ARM: dts: renesas: Fix SMSC Ethernet compatible values
  arm64: dts: renesas: rzg2l-smarc: Enable CANFD
  arm64: dts: renesas: rzg2l-smarc-som: Enable ADC on SMARC platform
  arm64: dts: renesas: rzg2l-smarc-som: Move extal and memory nodes to SOM DTSI
  arm64: dts: renesas: r8a779a0: falcon-cpu: Add SW47-SW49 support
  arm64: dts: renesas: rzg2l-smarc: Add Mic routing
  arm64: dts: renesas: rzg2l-smarc: Enable audio
  ...

Link: https://lore.kernel.org/r/cover.1633081147.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.16-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

ADC-keys for the mk808 board and a number of further cleanups
to make dt-schema happier.

* tag 'v5.16-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: swap timer clock-names
  ARM: dts: rockchip: add more angle brackets to operating-points property on rk3066a
  ARM: dts: rockchip: rename opp-table node names
  ARM: dts: rockchip: change rv1108 gmac nodename
  ARM: dts: rockchip: add adc-keys node to rk3066a-mk808

Link: https://lore.kernel.org/r/5121280.Lt9SDvczpP@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

This contains the parts that were originally meant for 5.15 + some
new thing:

New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)

Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.

Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.

SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)

Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.

A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.

* tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (65 commits)
  arm64: dts: rockchip: add phandles to muxed i2c buses on rk3368-lion
  arm64: dts: rockchip: define iodomains for rk3368-lion
  arm64: dts: rockchip: fix LDO_REG4 / LDO_REG7 confusion on rk3368-lion
  arm64: dts: rockchip: align operating-points table name with dtschema
  arm64: dts: rockchip: hook up camera on px30-evb
  arm64: dts: rockchip: add isp node for px30
  arm64: dts: rockchip: add Coresight debug range for RK3399
  arm64: dts: rockchip: Correct regulator for USB host on Odroid-Go2
  arm64: dts: rockchip: fix PCI reg address warning on rk3399-gru
  arm64: dts: rockchip: add saradc to rk3568-evb1-v10
  arm64: dts: rockchip: Fix GPU register width for RK3328
  arm64: dts: rockchip: Re-add interrupt-names for RK3399's vpu
  arm64: dts: rockchip: add missing rockchip,grf property to rk356x
  arm64: dts: rockchip: add RK3399 Gru gpio-line-names
  arm64: dts: rockchip: Enable SFC for Odroid Go Advance
  arm64: dts: rockchip: Add SFC to RK3308
  arm64: dts: rockchip: Add SFC to PX30
  arm64: dts: rockchip: add thermal support to Quartz64 Model A
  arm64: dts: rockchip: add rk3568 tsadc nodes
  arm64: dts: rockchip: add rk356x gpio debounce clocks
  ...

Link: https://lore.kernel.org/r/4439872.CQOukoFCf9@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: ZynqMP DT changes for v5.16

- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches

* tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx: (36 commits)
  arm64: zynqmp: Wire psgtr for zc1751-xm013
  arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
  arm64: zynqmp: Enable gpio and qspi for zc1275-revA
  arm64: zynqmp: Fix serial compatible string
  arm64: zynqmp: Remove not documented is-dual property
  arm64: zynqmp: Add psgtr description to zc1751 dc1 board
  arm64: zynqmp: Add support for zcu102-rev1.1 board
  arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
  arm64: zynqmp: Sync psgtr node location with zcu104-revA
  arm64: zynqmp: Add reset description for sata
  arm64: zynqmp: Move rtc to different location on zcu104-revA
  arm64: zynqmp: Wire qspi on multiple boards
  arm64: zynqmp: Remove information about dma clock on zcu106
  arm64: zynqmp: Update rtc calibration value
  arm64: zynqmp: Add note about UHS mode on some boards
  arm64: zynqmp: Move DP nodes to the end of file on zcu106
  arm64: zynqmp: Remove can aliases from zc1751
  arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout value
  arm64: zynqmp: List reset property for ethernet phy
  arm64: zynqmp: Add nvmem alises for eeproms
  ...

Link: https://lore.kernel.org/r/b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.euSigned-off-by: Arnd Bergmann <arnd@arndb.de>

There are couple of revisions of SOMs (k26) and associated carrier cards
(kv260).
SOM itself has two major versions:
sm-k26 - SOM with EMMC
smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
in QSPI.

SOMs are describing only devices available on the SOM or connections which
are described in specification (for example UART, fwuen).

When SOM boots out of QSPI it uses limited number of peripherals defined by
the specification and present in sm(k)-k26 dtses.
Then a carrier card (CC) detection is happening and DT overlay is applied
to brings new functionality. That's why DT overlays are used. The name is
composed together with SOM name and CC name that's why DT overlays with
these names are generated to make sure they can be used together.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com

Describe all Ethernet PHY reset GPIOs on R-Car Gen3 boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3e6fd765850e8ef0980d8e98bc5f2126538d626f.1631177442.git.geert+renesas@glider.be

Describe all Ethernet PHY reset GPIOs on RZ/G1 boards, to avoid relying
solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e20b3643b4dc5f6c2a9e19d9544495c06075d9ff.1631177442.git.geert+renesas@glider.be

Describe all Ethernet PHY reset GPIOs on R-Mobile boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b41bf0098ff193fbff9fad04d00075ce1bea1986.1631177442.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on R-Car Gen3 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Atheros
AR8031 PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/3f1b58756f149f0c634c66abaecc88e699f4c3cc.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Renesas
uPD60610 or uPD60611 PHYs on RZ/A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/335a1dfea905369da683e122e41e08ca1c5f90f7.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8201FL PHYs on RZ/A2 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/a23eca16869457684b0300379233e335b4e2047e.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing SMSC
LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/247dc2074dae149af07b6d014985ad30eb362eda.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8081 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ec5c7dadf3c0fe5e47dfbae72fb435047203ad06.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be

While networking works fine in RGMII mode when using the Linux generic
PHY driver, it fails when using the Atheros PHY driver.
Fix this by correcting the Ethernet PHY mode to RGMII-RXID, which works
fine with both drivers.

Fixes: a5200e63 ("arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling")
Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4c15b2df23bb63f15abf9dfb88860477f4f523.1632465965.git.geert+renesas@glider.be

According to schematics, and confirmed by ID_REV register contents, the
Ethernet controllers on various development board are not SMSC LAN9220,
but different variants:
  - KZM-A9-Dual and KZM-A9-GT: LAN9221,
  - Bock-W and Marzen: LAN89218AQ.

Update the compatible values accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59c142176f795b3541c935df43ab11cecd77cc61.1631173813.git.geert+renesas@glider.be

Pull ksmbd fixes from Steve French:
 "Five fixes for the ksmbd kernel server, including three security
  fixes:

   - remove follow symlinks support

   - use LOOKUP_BENEATH to prevent out of share access

   - SMB3 compounding security fix

   - fix for returning the default streams correctly, fixing a bug when
     writing ppt or doc files from some clients

   - logging more clearly that ksmbd is experimental (at module load
     time)"

* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use LOOKUP_BENEATH to prevent the out of share access
  ksmbd: remove follow symlinks support
  ksmbd: check protocol id in ksmbd_verify_smb_message()
  ksmbd: add default data stream name in FILE_STREAM_INFORMATION
  ksmbd: log that server is experimental at module load

Pull EDAC fixes from Borislav Petkov:
 "Fix two EDAC drivers using the wrong value type for the DIMM mode"

* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/dmc520: Assign the proper type to dimm->edac_mode
  EDAC/synopsys: Fix wrong value type assignment for edac_mode

Pull thermal fixes from Daniel Lezcano:

 - Fix thermal shutdown after a suspend/resume due to a wrong TCC value
   restored on Intel platform (Antoine Tenart)

 - Fix potential buffer overflow when building the list of policies. The
   buffer size is not updated after writing to it (Dan Carpenter)

 - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)

* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
  thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
  thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Prevent sending the wrong signal when protection keys are enabled
     and the kernel handles a fault in the vsyscall emulation.

   - Invoke early_reserve_memory() before invoking e820_memory_setup()
     which is required to make the Xen dom0 e820 hooks work correctly.

   - Use the correct data type for the SETZ operand in the EMQCMDS
     instruction wrapper.

   - Prevent undefined behaviour to the potential unaligned accesss in
     the instruction decoder library"

* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
  x86/asm: Fix SETZ size enqcmds() build failure
  x86/setup: Call early_reserve_memory() earlier
  x86/fault: Fix wrong signal when vsyscall fails with pkey

Pull timer fix from Thomas Gleixner:
 "A single fix for the recently introduced regression in posix CPU
  timers which failed to stop the timer when requested. That caused
  unexpected signals to be sent to the process/thread causing
  malfunction"

* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Prevent spuriously armed 0-value itimer

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Work around a bad GIC integration on a Renesas platform which can't
     handle byte-sized MMIO access

   - Plug a potential memory leak in the GICv4 driver

   - Fix a regression in the Armada 370-XP IPI code which was caused by
     issuing EOI instack of ACK.

   - A couple of small fixes here and there"

* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Work around broken Renesas integration
  irqchip/renesas-rza1: Use semicolons instead of commas
  irqchip/gic-v3-its: Fix potential VPE leak on error
  irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
  irqchip/mbigen: Repair non-kernel-doc notation
  irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
  irqchip/armada-370-xp: Fix ack/eoi breakage
  Documentation: Fix irq-domain.rst build warning

Merge misc fixes from Andrew Morton:
 "16 patches.

  Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
  lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
  debug, and pagemap)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix uninitialized use in overcommit_policy_handler
  mm/memory_failure: fix the missing pte_unmap() call
  kasan: always respect CONFIG_KASAN_STACK
  sh: pgtable-3level: fix cast to pointer from integer of different size
  mm/debug: sync up latest migrate_reason to migrate_reason_names
  mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
  mm: fs: invalidate bh_lrus for only cold path
  lib/zlib_inflate/inffast: check config in C to avoid unused function warning
  tools/vm/page-types: remove dependency on opt_file for idle page tracking
  scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
  ocfs2: drop acl cache for directories too
  mm/shmem.c: fix judgment error in shmem_is_huge()
  xtensa: increase size of gcc stack frame check
  mm/damon: don't use strnlen() with known-bogus source length
  kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
  mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()

Pull SCSI fixes from James Bottomley:
 "Thirty-three fixes, I'm afraid.

  Essentially the build up from the last couple of weeks while I've been
  dealling with Linux Plumbers conference infrastructure issues. It's
  mostly the usual assortment of spelling fixes and minor corrections.

  The only core relevant changes are to the sd driver to reduce the spin
  up message spew and fix a small memory leak on the freeing path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
  scsi: ses: Retry failed Send/Receive Diagnostic commands
  scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
  scsi: lpfc: Fix gcc -Wstringop-overread warning, again
  scsi: lpfc: Use correct scnprintf() limit
  scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
  scsi: core: Remove 'current_tag'
  scsi: acornscsi: Remove tagged queuing vestiges
  scsi: fas216: Kill scmd->tag
  scsi: qla2xxx: Restore initiator in dual mode
  scsi: ufs: core: Unbreak the reset handler
  scsi: sd_zbc: Support disks with more than 2**32 logical blocks
  scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
  scsi: bsg: Fix device unregistration
  scsi: sd: Make sd_spinup_disk() less noisy
  scsi: ufs: ufs-pci: Fix Intel LKF link stability
  scsi: mpt3sas: Clean up some inconsistent indenting
  scsi: megaraid: Clean up some inconsistent indenting
  scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
  scsi: Remove SCSI CDROM MAINTAINERS entry
  scsi: megaraid: Fix Coccinelle warning
  ...

Pull io_uring fixes from Jens Axboe:
 "This one looks a bit bigger than it is, but that's mainly because 2/3
  of it is enabling IORING_OP_CLOSE to close direct file descriptors.

  We've had a few folks using them and finding it confusing that the way
  to close them is through using -1 for file update, this just brings
  API symmetry for direct descriptors. Hence I think we should just do
  this now and have a better API for 5.15 release. There's some room for
  de-duplicating the close code, but we're leaving that for the next
  merge window.

  Outside of that, just small fixes:

   - Poll race fixes (Hao)

   - io-wq core dump exit fix (me)

   - Reschedule around potentially intensive tctx and buffer iterators
     on teardown (me)

   - Fix for always ending up punting files update to io-wq (me)

   - Put the provided buffer meta data under memcg accounting (me)

   - Tweak for io_write(), removing dead code that was added with the
     iterator changes in this release (Pavel)"

* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  io_uring: make OP_CLOSE consistent with direct open
  io_uring: kill extra checks in io_write()
  io_uring: don't punt files update to io-wq unconditionally
  io_uring: put provided buffer meta data under memcg accounting
  io_uring: allow conditional reschedule for intensive iterators
  io_uring: fix potential req refcount underflow
  io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
  io_uring: fix race between poll completion and cancel_hash insertion
  io-wq: ensure we exit if thread group is exiting

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - keep ctrl->namespaces ordered (Christoph Hellwig)
      - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
        Grimberg)
      - handled updated hw_queues in nvme-fc more carefully (Daniel
        Wagner, James Smart)

 - md lock order fix (Christoph)

 - fallocate locking fix (Ming)

 - blktrace UAF fix (Zhihao)

 - rq-qos bio tracking fix (Ming)

* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  block: hold ->invalidate_lock in blkdev_fallocate
  blktrace: Fix uaf in blk_trace access after removing by sysfs
  block: don't call rq_qos_ops->done_bio if the bio isn't tracked
  md: fix a lock order reversal in md_alloc
  nvme: keep ctrl->namespaces ordered
  nvme-tcp: fix incorrect h2cdata pdu offset accounting
  nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
  nvme-fc: avoid race between time out and tear down
  nvme-fc: update hardware queues before using them

Pull xen fixes from Juergen Gross:
 "Some minor cleanups and fixes of some theoretical bugs, as well as a
  fix of a bug introduced in 5.15-rc1"

* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/x86: fix PV trap handling on secondary processors
  xen/balloon: fix balloon kthread freezing
  swiotlb-xen: this is PV-only on x86
  xen/pci-swiotlb: reduce visibility of symbols
  PCI: only build xen-pcifront in PV-enabled environments
  swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
  Xen/gntdev: don't ignore kernel unmapping error
  xen/x86: drop redundant zeroing from cpu_initialize_context()

Merge tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - fix to Kselftest common framework header install to run before other
   targets for it work correctly in parallel build case.

 - fixes to kvm test to not ignore fscanf() returns which could result
   in inconsistent test behavior and failures.

* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
  selftests: kvm: move get_run_delay() into lib/test_util
  selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
  selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
  selftests: be sure to make khdr before other targets

Pull erofs fixes from Gao Xiang:
 "Two bugfixes to fix the 4KiB blockmap chunk format availability and a
  dangling pointer usage. There is also a trivial cleanup to clarify
  compacted_2b if compacted_4b_initial > totalidx.

  Summary:

   - fix the dangling pointer use in erofs_lookup tracepoint

   - fix unsupported chunk format check

   - zero out compacted_2b if compacted_4b_initial > totalidx"

* tag 'erofs-for-5.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clear compacted_2b if compacted_4b_initial > totalidx
  erofs: fix misbehavior of unsupported chunk format check
  erofs: fix up erofs_lookup tracepoint

Pull cifs fixes from Steve French:
 "Six small cifs/smb3 fixes, two for stable:

   - important fix for deferred close (found by a git functional test)
     related to attribute caching on close.

   - four (two cosmetic, two more serious) small fixes for problems
     pointed out by smatch via Dan Carpenter

   - fix for comment formatting problems pointed out by W=1"

* tag '5.15-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix incorrect check for null pointer in header_assemble
  smb3: correct server pointer dereferencing check to be more consistent
  smb3: correct smb3 ACL security descriptor
  cifs: Clear modified attribute bit from inode flags
  cifs: Deal with some warnings from W=1
  cifs: fix a sign extension bug

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.15-rc3.

  Nothing huge in here, just fixes for a number of small issues that
  have been reported. These include:

   - habanalabs race conditions and other bugs fixed

   - binder driver fixes

   - fpga driver fixes

   - coresight build warning fix

   - nvmem driver fix

   - comedi memory leak fix

   - bcm-vk tty race fix

   - other tiny driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  comedi: Fix memory leak in compat_insnlist()
  nvmem: NVMEM_NINTENDO_OTP should depend on WII
  misc: bcm-vk: fix tty registration race
  fpga: dfl: Avoid reads to AFU CSRs during enumeration
  fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
  fpga: machxo2-spi: Return an error on failure
  habanalabs: expose a single cs seq in staged submissions
  habanalabs: fix wait offset handling
  habanalabs: rate limit multi CS completion errors
  habanalabs/gaudi: fix LBW RR configuration
  habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
  habanalabs: fail collective wait when not supported
  habanalabs/gaudi: use direct MSI in single mode
  habanalabs: fix kernel OOPs related to staged cs
  habanalabs: fix potential race in interrupt wait ioctl
  mcb: fix error handling in mcb_alloc_bus()
  misc: genwqe: Fixes DMA mask setting
  coresight: syscfg: Fix compiler warning
  nvmem: core: Add stubs for nvmem_cell_read_variable_le_u32/64 if !CONFIG_NVMEM
  binder: make sure fd closes complete
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for 5.15-rc3:

   - greybus tty use-after-free bugfix

   - r8188eu ioctl overlap build warning fix

  Note, the r8188eu ioctl has been entirely removed for 5.16-rc1, but
  it's good to get this fixed now for people using this in 5.15.

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: fix -Wrestrict warnings
  staging: greybus: uart: fix tty use after free

Pull tty/serial fixes from Greg KH:
 "Here are four small tty/serial driver fixes for 5.15-rc3. They
  include:

   - remove an export now that no one is using it anymore

   - mvebu-uart tx_empty callback fix

   - 8250_omap bugfix

   - synclink_gt build fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: unexport tty_ldisc_release
  tty: synclink_gt: rename a conflicting function name
  serial: mvebu-uart: fix driver's tx_empty callback
  serial: 8250: 8250_omap: Fix RX_LVL register offset

Pull USB driver fixes from Greg KH:
 "Here are some USB driver fixes and new device ids for 5.15-rc3.

  They include:

   - usb-storage quirk additions

   - usb-serial new device ids

   - usb-serial driver fixes

   - USB roothub registration bugfix to resolve a long-reported issue

   - usb gadget driver fixes for a large number of small things

   - dwc2 driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  USB: serial: option: add device id for Foxconn T99W265
  USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
  USB: serial: cp210x: add part-number debug printk
  USB: serial: cp210x: fix dropped characters with CP2102
  MAINTAINERS: usb, update Peter Korsgaard's entries
  usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
  usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
  Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
  USB: serial: option: remove duplicate USB device ID
  USB: serial: mos7840: remove duplicated 0xac24 device ID
  arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize property
  usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
  usb: gadget: f_uac2: Add missing companion descriptor for feedback EP
  usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
  usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()
  xhci: Set HCD flag to defer primary roothub registration
  usb: core: hcd: Add support for deferring roothub registration
  usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
  usb: dwc3: core: balance phy init and exit
  Revert "USB: bcma: Add a check for devm_gpiod_get"
  ...