- 11 May, 2016 40 commits
-
-
Gavin Shan authored
This changes the data type of PE number from "int" to "unsigned int" in order to match the fact PE number is never negative: * The number of PE to which the specified PCI device is attached. * The PE number map for SRIOV VFs. * The returned PE number from pnv_ioda_alloc_pe(). * The returned PE number from pnv_ioda2_pick_m64_pe(). Suggested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-By:
Alistair Popple <alistair@popple.id.au> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
This renames the fields related to PE number in "struct pnv_phb" for better reflecting of their usages as Alexey suggested. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This moves those fields in struct pnv_phb that are related to PE allocation around. No logical change. Signed-off-by:
-
Gavin Shan authored
The last usage of pnv_phb::bdfn_to_pe() was removed in ff57b454 ("powerpc/eeh: Do probe on pci_dn"), so drop it. Signed-off-by:
-
Gavin Shan authored
This cleans up on below data struct instances to use tab instead of space indent of statement to avoid complains from scripts/checkpatch.pl. No logical changes introduced. @pnv_pci_ioda_controller_ops @pnv_npu_ioda_controller_ops Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
-
Gavin Shan authored
Each PHB has one instance of "struct pci_controller_ops" that includes various callbacks called by PCI subsystem. In the definition of this struct, some callbacks have explicit names for its arguments, but the left don't have. This adds all explicit names of the arguments to the callbacks in "struct pci_controller_ops" so that the code looks consistent. Also, argument name @dev is replaced by @pdev as the later one is the preferred name for PCI device. Signed-off-by:
-
Rashmica Gupta authored
Testing that the TM SPRs are behaving the way they should. Uses more threads than cpus to see if the following register values persist with context switching: - the FS (failure summary) flag in TEXASR - TFIAR and TFHAR Signed-off-by:
Rashmica Gupta <rashmicy@gmail.com> Signed-off-by:
-
Rashmica Gupta authored
If the transaction is aborted, the TAR should be rolled back to the checkpointed value before the transaction began. The value written to the TAR when the transaction is suspended should only remain there if the transaction completes successfully. Signed-off-by:
-
Rashmica Gupta authored
This test does a fork syscall inside a transaction. Basic sniff test to see if we can enter the kernel during a transaction. Signed-off-by:
-
Rashmica Gupta authored
Currently tbegin, tend etc are written as opcodes or asm instructions. So standardise these to asm instructions. Signed-off-by:
-
Rashmica Gupta authored
Currently there is a reg.h in pmu/ebb that has defines that are useful in other powerpc selftests so move this up into selftests/powerpc folder. Also include in utils.h - as this is often used in self tests. Add in some other useful register defines. Signed-off-by:
-
Mahesh Salgaonkar authored
The routine machine_check_pSeries_early() is only used on powernv, not pseries. Hence rename machine_check_pSeries_early() to machine_check_powernv_early(). Reported-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Lombard authored
In the PowerVM environment, the PHYP CoherentAccel component manages the state of the Coherent Accelerator Processor Interface adapter and virtualizes CAPI resources, handles CAPP, PSL, PSL Slice errors - and interrupts - and provides a new set of hcalls for the OS APIs to utilize Accelerator Function Unit (AFU). During the course of operation, a coherent platform function can encounter errors. Some possible reason for errors are: • Hardware recoverable and unrecoverable errors • Transient and over-threshold correctable errors PHYP implements its own state model for the coherent platform function. The state of the AFU is available through a hcall. The current implementation of the cxl driver, for the PowerVM environment, checks this state of the AFU only when an action is requested - open a device, ioctl command, memory map, attach/detach a process - from an external driver - cxlflash, libcxl. If an error is detected the cxl driver handles the error according the content of the Power Architecture Platform Requirements document. But in case of low-level troubles (or error injection), the PHYP component may reset the card and change the AFU state. The PHYP interface doesn't provide any way to be notified when that happens thus implies that the cxl driver: • cannot handle immediatly the state change of the AFU. • cannot notify other drivers (cxlflash, ...) The purpose of this patch is to wake up the cpu periodically to check the current state of each AFU and to see if we need to enter an error recovery path. Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Ian Munsie authored
cxl devices typically access memory using an MMU in much the same way as the CPU, and each context includes a state register much like the MSR in the CPU. Like the CPU, the state register includes a bit to enable relocation, which we currently always enable. In some cases, it may be desirable to allow a device to access memory using real addresses instead of effective addresses, so this adds a new API, cxl_set_translation_mode, that can be used to disable relocation on a given kernel context. This can allow for the creation of a special privileged context that the device can use if it needs relocation disabled, and can use regular contexts at times when it needs relocation enabled. This interface is only available to users of the kernel API for obvious reasons, and will never be supported in a virtualised environment. This will be used by the upcoming cxl support in the mlx5 driver. Signed-off-by:
-
Ian Munsie authored
In the cxl kernel API, it is possible to create a context and start it without allocating any interrupts. Since we assign or allocate the PSL interrupt when allocating AFU interrupts this will lead to a situation where we start the context with no means to take any faults. The user API is not affected as it always goes through the cxl interrupt allocation code paths and will have the PSL interrupt allocated or assigned, even if no AFU interrupts were requested. This checks that at least one interrupt is configured at the time of attach, and if not it will assign the multiplexed PSL interrupt for powernv, or allocate a single interrupt for PowerVM. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
-
Ian Munsie authored
These defines are not used, but other equivalent definitions (CXL_SPA_SW_CMD_*) are used. Remove the unused defines. Signed-off-by:
-
Ian Munsie authored
num_of_process is a 16 bit field, theoretically allowing an AFU to support 16K processes, however the scheduled process area currently has a maximum size of 1MB, which limits the maximum number of processes to 7704. Some AFUs may not necessarily care what the limit is and just want to be able to use the maximum by setting the field to 16K. To allow these to work, detect this situation and use the maximum size for the SPA. Downgrade the WARN_ON to a dev_warn. Signed-off-by:
-
Gavin Shan authored
The function is used to update the MMU with software PTE. It can be called by data access exception handler (0x300) or instruction access exception handler (0x400). If the function is called by 0x400 handler, the local variable @access is set to _PAGE_EXEC to indicate the software PTE should have that flag set. When the function is called by 0x300 handler, @access is set to zero. This improves the readability of the function by replacing if statements with switch. No logical changes introduced. Signed-off-by:
-
Oliver O'Halloran authored
The zone that contains the top of memory will be either ZONE_NORMAL or ZONE_HIGHMEM depending on the kernel config. There are two functions that require this information and both of them use an #ifdef to set a local variable (top_zone). This is a little silly so lets just make it a constant. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Cc: linux-mm@kvack.org Signed-off-by:
-
Oliver O'Halloran authored
There is a switch fallthough in instr_analyze() which can cause an invalid instruction to be emulated as a different, valid, instruction. The rld* (opcode 30) case extracts a sub-opcode from bits 3:1 of the instruction word. However, the only valid values of this field are 001 and 000. These cases are correctly handled, but the others are not which causes execution to fall through into case 31. Breaking out of the switch causes the instruction to be marked as unknown and allows the caller to deal with the invalid instruction in a manner consistent with other invalid instructions. Signed-off-by:
-
Lennart Sorensen authored
Commit be96f633 ("powerpc: Split out instruction analysis part of emulate_step()") introduced ldarx and stdcx into the instructions in sstep.c, which are not accepted by the assembler on powerpcspe, but does seem to be accepted by the normal powerpc assembler even in 32 bit mode. Wrap these two instructions in a __powerpc64__ check like it is everywhere else in the file. Fixes: be96f633 ("powerpc: Split out instruction analysis part of emulate_step()") Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by:
-
Paul Mackerras authored
xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by:
-
Naveen N. Rao authored
On some architectures (powerpc in particular), the number of registers exceeds what can be represented in an integer bitmask. Ensure we generate the proper bitmask on such platforms. Fixes: 71ad0f5e ("perf tools: Support for DWARF CFI unwinding on post processing") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Chandan Kumar authored
Adds support for unwinding user stack dump by linking with libunwind. Signed-off-by:
Chandan Kumar <chandan.kumar@linux.vnet.ibm.com> Reviewed-by:
-
Chandan Kumar authored
With perf regs support enabled for powerpc, in commit ed4a4ef8 ("powerpc/perf: Add support for sampling interrupt register state"), the support for obtaining perf user stack dump is already enabled. This patch declares the support for same and also updates documentation to mark the support for perf-regs and perf-stackdump. Signed-off-by:
-
Michael Ellerman authored
With Linux page size of 64K and hardware only supporting 4K HPTE, if we use subpage protection, we always fail for the subpage 0 as shown below (using the selftest subpage_prot test): 520175565: (4520111850): Failed at 0x3fffad4b0000 (p=13,sp=0,w=0), want=fault, got=pass ! 4520890210: (4520826495): Failed at 0x3fffad5b0000 (p=29,sp=0,w=0), want=fault, got=pass ! 4521574251: (4521510536): Failed at 0x3fffad6b0000 (p=45,sp=0,w=0), want=fault, got=pass ! 4522258324: (4522194609): Failed at 0x3fffad7b0000 (p=61,sp=0,w=0), want=fault, got=pass ! This is because hash preload wrongly inserts the HPTE entry for subpage 0 without looking at the subpage protection information. Fix it by teaching should_hash_preload() not to preload if we have subpage protection configured for that range. It appears this has been broken since it was introduced in 2008. Fixes: fa28237c ("[POWERPC] Provide a way to protect 4k subpages when using 64k pages") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Rework into should_hash_preload() to avoid build fails w/SLICES=n] Signed-off-by:
-
Michael Ellerman authored
Currently we have a check in hash_preload() against the psize, which is only included when CONFIG_PPC_MM_SLICES is enabled. We want to expand this check in a subsequent patch, so factor it out to allow that. As a bonus it removes the #ifdef in the C code. Unfortunately we can't put this in the existing CONFIG_PPC_MM_SLICES block because it would require a forward declaration. Signed-off-by: -
Suraj Jitindar Singh authored
After obtaining a property from of_find_property() and before calling of_remove_property() most code checks to ensure that the property returned from of_find_property() is not null. The previous patch moved this check to the start of the function of_remove_property() in order to avoid the case where this check isn't done and a null value is passed. This ensures the check is always conducted before taking locks and attempting to remove the property. Thus it is no longer necessary to perform a check for null values before invoking of_remove_property(). Update of_remove_property() call sites in order to remove redundant checking for null property value as check is now performed within the of_remove_property function(). Signed-off-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> [mpe: Unbreak some lines which are just >80 chars for readability] Signed-off-by:
-
Suraj Jitindar Singh authored
The validity of the property input argument to of_remove_property() is never checked within the function and thus it is possible to pass a null value. It happens that this will be picked up in __of_remove_property() as no matching property of the device node will be found and thus an error will be returned, however once again there is no explicit check for a null value. By the time this is detected 2 locks have already been acquired which is completely unnecessary if the property to remove is null. Add an explicit check in the function of_remove_property() for a null property value and return -ENODEV in this case, this is consistent with what the previous return value would have been when the null value was not detected and passed to __of_remove_property(). By moving an explicit check for the property paramenter into the of_remove_property() function, this will remove the need to perform this check in calling code before invocation of the of_remove_property() function. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Suraj Jitindar Singh authored
The return value of of_get_property() isn't checked before it is passed to the strstr() function, if it happens that the return value is null then this will result in a null pointer being dereferenced. Add a check to see if the return value of of_get_property() is null and if it is continue straight on to the next node. Signed-off-by:
Chris Smart <chris@distroguy.com> Signed-off-by:
-
Alexey Kardashevskiy authored
When cfg_dbg() is enabled (i.e. mapped to printk()), gcc produces errors as the __func__ parameter is missing (pnv_pci_cfg_read() has one); this adds the missing parameter. cfg_dbg() is just an inferior version of pr_devel() so use the latter instead. Signed-off-by:
-
Michael Ellerman authored
It's helpful for automated testing if the test returns error codes back to the calling program. While we're here fix all the usages of %p to remove the double 0x, ie. %p already includes 0x. Signed-off-by:
-
Chris Smart authored
Test that performing a copy paste sequence in userspace on P9 does not result in a leak of the copy into the paste of another process. This is based on Anton Blanchard's context_switch benchmarking code. It sets up two processes tied to the same CPU, one which copies and one which pastes. The paste should never succeed and the test fails if it does. This is a test for commit, "8a649045 powerpc: Add support for userspace P9 copy paste." Patch created with much assistance from Michael Neuling <mikey@neuling.org> Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Chris Smart authored
The code in machine_restart/power_off/halt() includes #ifdefs around calls to smp_send_stop(), however these are not required as include/linux/smp.h includes an empty version of this function for CONFIG_SMP=n builds. Signed-off-by:
-
Rashmica Gupta authored
Support for the A2 cpu was removed in commit fb5a5157 ("powerpc: Remove platforms/wsp and associated pieces"), and the externs: __setup_cpu_a2 and __restore_cpu_a2 are still around and unused, so remove them. Signed-off-by:
-
Aneesh Kumar K.V authored
The usage in mm mmu_context_nohash.c is bogus, because we set the context.id value to MMU_NO_CONTEXT 4 lines previously in the same function, meaning slice_mm_new_context() will always be true. The book3s 64 usage was removed in the previous commit. So remove it as unused. Signed-off-by:
-
Aneesh Kumar K.V authored
As part of the radix support we switched Book3s64 to use a value of ~0 for MMU_NO_CONTEXT. That is because id 0 is special on radix. However that broke the logic in init_new_context(). The code there needs to differentiate between a newly allocated context and one inherited via fork. Previously it worked because a newly allocated context has an id of zero (because it was just memset() to zero), which used to match MMU_NO_CONTEXT, and therefore slice_mm_new_context() did the right thing. Instead check against a context.id value of zero instead of using slice_mm_new_context(). Without this patch we never call slice_set_user_psize(), and end up with a slice psize value of zero and we always end up using 4K HPTE. Fixes: 1a472c9d ("powerpc/mm/radix: Add tlbflush routines") Signed-off-by:
-
Valentin Rothberg authored
It's CONFIG_PPC_STD_MMU_64 not ... CONFIG_PPC_MMU_STD_64. Fixes: 11ffc1cfa4c2 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code") Signed-off-by:Valentin Rothberg <valentinrothberg@gmail.com> Reviewed-by:
-
Aneesh Kumar K.V authored
Add #defines for Power ISA 3.0 software defined bits. Signed-off-by:
-
Aneesh Kumar K.V authored
We use the existing "ibm,pa-features" device-tree property to enable Radix MMU mode. This means we default to hash mode unless firmware tells us it's OK to start using Radix mode. Signed-off-by:
-
