- 24 Jul, 2012 24 commits
-
-
Steven Miao authored
Pass wake up source mask and wakeup source polarity to deepsleep and hibernate. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Bob Liu authored
Set .probe_type = "map_rom" for norflash so that xip_test can run correctly. Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Otherwise, the compiler may optimize assemble code into 8bit access instruction when target register is 8 bit width. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Scott Jiang authored
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Bob Liu authored
Add irq_set_wake to bfin_sec_irqchip, drivers like stmmac need it. Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Scott Jiang authored
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Add add deepsleep for bf60x. 1. Call DMC init functions to enter and exit DDR self refresh mode. 2. Wait till CGU PLL is locked after wake up and exit DDR self refresh mode. 3. Make asessembly function enter_deepsleep comply with C funtion ABI in order to call other C functions. 4. Switch kernel stack by register EX_SCRATCH_REG. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Bob Liu authored
ROM range of bf60x is above 0xb0000000. Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Bob Liu authored
So that user can set the clocks through menuconfig. Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Sonic Zhang authored
Otherwise, chained sg list may be missed. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Scott Jiang authored
We need larger DMA region to support HD video. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
Scott Jiang authored
Extend chip select number supported by spi master as well because we can accept SPISEL1-SPISEL7 and all GPIO. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
-
- 21 Jul, 2012 7 commits
-
-
Linus Torvalds authored
-
Rafael J. Wysocki authored
The SYSTEM_SUSPEND_DISK system state is never used, so drop it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge emailed kgdb dmesg fixups patches from Anton Vorontsov: "The dmesg command appears to be broken after the printk rework. The old logic in the kdb code makes no sense in terms of current printk/logging storage format, and KDB simply hangs forever upon entering 'dmesg' command. The first patch revives the command by switching to kmsg_dumper iterator. As a side-effect, the code is now much more simpler. A few changes were needed in the printk.c: we needed unlocked variant of the kmsg_dumper iterator, but these can surely wait for 3.6. It's probably too late even for the first patch to go to 3.5, but I'll try to convince otherwise. :-) Here we go: - The current code is broken for sure, and has no hope to work at all. It is a regression - The new code works for me, and probably works for everyone else; - If it compiles (and I urge everyone to compile-test it on your setup), it hardly can make things worse." * Merge emailed patches from Anton Vorontsov: (4 commits) kdb: Switch to nolock variants of kmsg_dump functions printk: Implement some unlocked kmsg_dump functions printk: Remove kdb_syslog_data kdb: Revive dmesg command
-
Anton Vorontsov authored
The locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held), so let's switch to nolock variants. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
If used from KDB, the locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held). So, we have to implement a few routines that grab no logbuf lock. Yet we don't need these functions in modules, so we don't export them. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
The function is no longer needed, so remove it. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
The kgdb dmesg command is broken after the printk rework. The old logic in kdb code makes no sense in terms of current printk/logging storage format, and KDB simply hangs forever. This patch revives the command by switching to kmsg_dumper iterator. The code is now much more simpler and shorter. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Jul, 2012 9 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull late MIPS fixes from Ralf Baechle: "This fixes a number of lose ends in the MIPS code and various bug fixes. Aside of dropping some patch that should not be in this pull request everything has sat in -next for quite a while and there are no known issues. The biggest patch in this patch set moves the allocation of an array that is aliased to a function (for runtime generated code) to assembler code. This avoids an issue with certain toolchains when building for microMIPS." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (35 commits) MIPS: PCI: Move fixups from __init to __devinit. MIPS: Fix bug.h MIPS build regression MIPS: sync-r4k: remove redundant irq operation MIPS: smp: Warn on too early irq enable MIPS: call set_cpu_online() on cpu being brought up with irq disabled MIPS: call ->smp_finish() a little late MIPS: Yosemite: delay irq enable to ->smp_finish() MIPS: SMTC: delay irq enable to ->smp_finish() MIPS: BMIPS: delay irq enable to ->smp_finish() MIPS: Octeon: delay enable irq to ->smp_finish() MIPS: Oprofile: Fix build as a module. MIPS: BCM63XX: Fix BCM6368 IPSec clock bit MIPS: perf: Fix build error caused by unused counters_per_cpu_to_total() MIPS: Fix Magic SysRq L kernel crash. MIPS: BMIPS: Fix duplicate header inclusion. mips: mark const init data with __initconst instead of __initdata MIPS: cmpxchg.h: Add missing include MIPS: Malta may also be equipped with MIPS64 R2 processors. MIPS: Fix typo multipy -> multiply MIPS: Cavium: Fix duplicate ARCH_SPARSEMEM_ENABLE in kconfig. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper discard fixes from Alasdair G Kergon: - avoid a crash in dm-raid1 when discards coincide with mirror recovery; - avoid discarding shared data that's still needed in dm-thin; - don't guarantee that discarded blocks will be wiped in dm-raid1. * tag 'dm-3.5-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid1: set discard_zeroes_data_unsupported dm thin: do not send discards to shared blocks dm raid1: fix crash with mirror recovery and discard
-
git://git.open-osd.org/linux-open-osdLinus Torvalds authored
Pull pnfs/ore fixes from Boaz Harrosh: "These are catastrophic fixes to the pnfs objects-layout that were just discovered. They are also destined for @stable. I have found these and worked on them at around RC1 time but unfortunately went to the hospital for kidney stones and had a very slow recovery. I refrained from sending them as is, before proper testing, and surly I have found a bug just yesterday. So now they are all well tested, and have my sign-off. Other then fixing the problem at hand, and assuming there are no bugs at the new code, there is low risk to any surrounding code. And in anyway they affect only these paths that are now broken. That is RAID5 in pnfs objects-layout code. It does also affect exofs (which was not broken) but I have tested exofs and it is lower priority then objects-layout because no one is using exofs, but objects-layout has lots of users." * 'for-linus' of git://git.open-osd.org/linux-open-osd: pnfs-obj: Fix __r4w_get_page when offset is beyond i_size pnfs-obj: don't leak objio_state if ore_write/read fails ore: Unlock r4w pages in exact reverse order of locking ore: Remove support of partial IO request (NFS crash) ore: Fix NFS crash by supporting any unaligned RAID IO
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS free space fix-up bugfix from Artem Bityutskiy: "It's been reported already twice recently: http://lists.infradead.org/pipermail/linux-mtd/2012-May/041408.html http://lists.infradead.org/pipermail/linux-mtd/2012-June/042422.html and we finally have the fix. I am quite confident the fix is correct because I could reproduce the problem with nandsim and verify the fix. It was also verified by Iwo (the reporter). I am also confident that this is OK to merge the fix so late because this patch affects only the fixup functionality, which is not used by most users." * tag 'upstream-3.5-rc8' of git://git.infradead.org/linux-ubifs: UBIFS: fix a bug in empty space fix-up
-
Mikulas Patocka authored
We can't guarantee that REQ_DISCARD on dm-mirror zeroes the data even if the underlying disks support zero on discard. So this patch sets ti->discard_zeroes_data_unsupported. For example, if the mirror is in the process of resynchronizing, it may happen that kcopyd reads a piece of data, then discard is sent on the same area and then kcopyd writes the piece of data to another leg. Consequently, the data is not zeroed. The flag was made available by commit 983c7db3 (dm crypt: always disable discard_zeroes_data). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
When process_discard receives a partial discard that doesn't cover a full block, it sends this discard down to that block. Unfortunately, the block can be shared and the discard would corrupt the other snapshots sharing this block. This patch detects block sharing and ends the discard with success when sending it to the shared block. The above change means that if the device supports discard it can't be guaranteed that a discard request zeroes data. Therefore, we set ti->discard_zeroes_data_unsupported. Thin target discard support with this bug arrived in commit 104655fd (dm thin: support discards). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
This patch fixes a crash when a discard request is sent during mirror recovery. Firstly, some background. Generally, the following sequence happens during mirror synchronization: - function do_recovery is called - do_recovery calls dm_rh_recovery_prepare - dm_rh_recovery_prepare uses a semaphore to limit the number simultaneously recovered regions (by default the semaphore value is 1, so only one region at a time is recovered) - dm_rh_recovery_prepare calls __rh_recovery_prepare, __rh_recovery_prepare asks the log driver for the next region to recover. Then, it sets the region state to DM_RH_RECOVERING. If there are no pending I/Os on this region, the region is added to quiesced_regions list. If there are pending I/Os, the region is not added to any list. It is added to the quiesced_regions list later (by dm_rh_dec function) when all I/Os finish. - when the region is on quiesced_regions list, there are no I/Os in flight on this region. The region is popped from the list in dm_rh_recovery_start function. Then, a kcopyd job is started in the recover function. - when the kcopyd job finishes, recovery_complete is called. It calls dm_rh_recovery_end. dm_rh_recovery_end adds the region to recovered_regions or failed_recovered_regions list (depending on whether the copy operation was successful or not). The above mechanism assumes that if the region is in DM_RH_RECOVERING state, no new I/Os are started on this region. When I/O is started, dm_rh_inc_pending is called, which increases reg->pending count. When I/O is finished, dm_rh_dec is called. It decreases reg->pending count. If the count is zero and the region was in DM_RH_RECOVERING state, dm_rh_dec adds it to the quiesced_regions list. Consequently, if we call dm_rh_inc_pending/dm_rh_dec while the region is in DM_RH_RECOVERING state, it could be added to quiesced_regions list multiple times or it could be added to this list when kcopyd is copying data (it is assumed that the region is not on any list while kcopyd does its jobs). This results in memory corruption and crash. There already exist bypasses for REQ_FLUSH requests: REQ_FLUSH requests do not belong to any region, so they are always added to the sync list in do_writes. dm_rh_inc_pending does not increase count for REQ_FLUSH requests. In mirror_end_io, dm_rh_dec is never called for REQ_FLUSH requests. These bypasses avoid the crash possibility described above. These bypasses were improperly implemented for REQ_DISCARD when the mirror target gained discard support in commit 5fc2ffea (dm raid1: support discard). In do_writes, REQ_DISCARD requests is always added to the sync queue and immediately dispatched (even if the region is in DM_RH_RECOVERING). However, dm_rh_inc and dm_rh_dec is called for REQ_DISCARD resusts. So it violates the rule that no I/Os are started on DM_RH_RECOVERING regions, and causes the list corruption described above. This patch changes it so that REQ_DISCARD requests follow the same path as REQ_FLUSH. This avoids the crash. Reference: https://bugzilla.redhat.com/837607Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Boaz Harrosh authored
It is very common for the end of the file to be unaligned on stripe size. But since we know it's beyond file's end then the XOR should be preformed with all zeros. Old code used to just read zeros out of the OSD devices, which is a great waist. But what scares me more about this situation is that, we now have pages attached to the file's mapping that are beyond i_size. I don't like the kind of bugs this calls for. Fix both birds, by returning a global zero_page, if offset is beyond i_size. TODO: Change the API to ->__r4w_get_page() so a NULL can be returned without being considered as error, since XOR API treats NULL entries as zero_pages. [Bug since 3.2. Should apply the same way to all Kernels since] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-
Boaz Harrosh authored
[Bug since 3.2 Kernel] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-