- 10 Jun, 2020 4 commits
-
-
Anup Patel authored
The RISC-V per-HART local interrupt controller manages software interrupts, timer interrupts, external interrupts (which are routed via the platform level interrupt controller) and other per-HART local interrupts. We add a driver for the RISC-V local interrupt controller, which eventually replaces the RISC-V architecture code, allowing for a better split between arch code and drivers. The driver is compliant with RISC-V Hart-Level Interrupt Controller DT bindings located at: Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt Co-developed-by:
Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by:
Anup Patel <anup.patel@wdc.com> [Palmer: Cleaned up warnings] Signed-off-by:
-
Anup Patel authored
The plic_find_hart_id() can be useful to other interrupt controller drivers (such as RISC-V local interrupt driver) so we rename this function to riscv_of_parent_hartid() and place it in arch directory along with riscv_of_processor_hartid(). Signed-off-by:
Atish Patra <atish.patra@wdc.com> Reviewed-by:
Palmer Dabbelt <palmerdabbelt@google.com> Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Anup Patel authored
Currently, the IPI handling routine riscv_software_interrupt() does not take any argument and also does not perform irq_enter()/irq_exit(). This patch makes IPI handling routine more self-contained by: 1. Passing "pt_regs *" argument 2. Explicitly doing irq_enter()/irq_exit() 3. Explicitly save/restore "pt_regs *" using set_irq_regs() With above changes, IPI handling routine does not depend on caller function to perform irq_enter()/irq_exit() and save/restore of "pt_regs *" hence its more self-contained. This also enables us to call IPI handling routine from IRQCHIP drivers. Signed-off-by:
-
Palmer Dabbelt authored
Like patch b1b3f49c ("ARM: config: sort select statements alphanumerically") , we sort all our select statements alphanumerically by using the perl script in patch b1b3f49c as above. As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. Suggested-by:
Zong Li <zong.li@sifive.com> [Palmer: Re-ran the script, as there were predictably a bunch of conflicts] Signed-off-by:
-
- 05 Jun, 2020 36 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull module updates from Jessica Yu: - Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has SHF_WRITE|SHF_EXECINSTR sections - Remove and clean up nested #ifdefs, as it makes code hard to read * tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Harden STRICT_MODULE_RWX module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm updates from Ingo Molnar: "Misc changes: - Unexport various PAT primitives - Unexport per-CPU tlbstate and uninline TLB helpers" * tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/tlb/uv: Add a forward declaration for struct flush_tlb_info x86/cpu: Export native_write_cr4() only when CONFIG_LKTDM=m x86/tlb: Restrict access to tlbstate xen/privcmd: Remove unneeded asm/tlb.h include x86/tlb: Move PCID helpers where they are used x86/tlb: Uninline nmi_uaccess_okay() x86/tlb: Move cr4_set_bits_and_update_boot() to the usage site x86/tlb: Move paravirt_tlb_remove_table() to the usage site x86/tlb: Move __flush_tlb_all() out of line x86/tlb: Move flush_tlb_others() out of line x86/tlb: Move __flush_tlb_one_kernel() out of line x86/tlb: Move __flush_tlb_one_user() out of line x86/tlb: Move __flush_tlb_global() out of line x86/tlb: Move __flush_tlb() out of line x86/alternatives: Move temporary_mm helpers into C x86/cr4: Sanitize CR4.PCE update x86/cpu: Uninline CR4 accessors x86/tlb: Uninline __get_current_cr3_fast() x86/mm: Use pgprotval_t in protval_4k_2_large() and protval_large_2_4k() x86/mm: Unexport __cachemode2pte_tbl ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V updates from Palmer Dabbelt: - The remainder of the code necessary to support the Kendryte K210: * Support for building device trees into the kernel, as the K210 doesn't have a bootloader that provides one * A K210 device tree and the associated defconfig update * Support for skipping PMP initialization on systems that trap on PMP accesses rather than treating them as WARL - Support for KGDB - Improvements to text patching - Some cleanups to the SiFive L2 cache driver * tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: soc: sifive: l2 cache: Mark l2_get_priv_group as static soc: sifive: l2 cache: Eliminate an unsigned zero compare warning riscv: Add support to determine no. of L2 cache way enabled riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure riscv: Use text_mutex instead of patch_lock riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation riscv: Remove the 'riscv_' prefix of function name riscv: Add SW single-step support for KDB riscv: Use the XML target descriptions to report 3 system registers riscv: Add KGDB support kgdb: Add kgdb_has_hit_break function RISC-V: Skip setting up PMPs on traps riscv: K210: Update defconfig riscv: K210: Add a built-in device tree riscv: Allow device trees to be built into the kernel -
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: - Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas * tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits) dt-bindings: clock: Add documentation for X1830 bindings. dt-bindings: mailbox: Convert imx mu to json-schema dt-bindings: power: Convert imx gpcv2 to json-schema dt-bindings: power: Convert imx gpc to json-schema dt-bindings: Merge gpio-usb-b-connector with usb-connector dt-bindings: timer: renesas: cmt: Convert to json-schema dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema dt-bindings: timer: Convert i.MX GPT to json-schema dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742 dt-bindings: serial: Add binding for UART pin swap dt-bindings: geni-se: Add interconnect binding for GENI QUP dt-bindings: geni-se: Convert QUP geni-se bindings to YAML dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix dt-bindings: input: touchscreen: edt-ft5x06: change reg property dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver dt-bindings: timer: renesas: mtu2: Convert to json-schema of/fdt: Remove redundant kbasename function call dt-bindings: clock: Convert i.MX1 clock to json-schema dt-bindings: clock: Convert i.MX21 clock to json-schema dt-bindings: clock: Convert i.MX25 clock to json-schema ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ... -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ... -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM defconfig updates from Arnd Bergmann: "These are the usual updates to arm/arm64 defconfig files, enabling newly added drivers and addressing changes to Kconfig files" * tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support arm64: defconfig: enable Qualcomm IPA and RMNet modules arm64: defconfig: Add LEDS_TRIGGER_TIMER arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc arm64: defconfig: Remove QCOM_GLINK_SSR ARM: multi_v7_defconfig: Enable r8a7742 SoC ARM: shmobile: defconfig: Enable r8a7742 SoC arm64: defconfig: enable meson gx audio as module arm64: defconfig: Enable SM8250 GCC driver ARM: defconfig: u8500: Enable new drivers for ux500 arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default arm64: configs: Enable sun50i cpufreq nvmem ARM: shmobile: defconfig: Refresh for v5.7-rc1 ARM: defconfig: u8500: Enable new drivers for samsung-golden ARM: configs: sunxi: Add sun8i analog codec arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers ARM: configs: at91: sama5: enable MCP16502 regulator ARM: configs: at91: sama5: enable SAMA5D2_PIOBU ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
-
Nick Desaulniers authored
This allows C code to make use of compilers with support for output variables along the fallthrough path via preprocessor define: CONFIG_CC_HAS_ASM_GOTO_OUTPUT [ This is not used anywhere yet, and currently released compilers don't support this yet, but it's coming, and I have some local experimental patches to take advantage of it when it does - Linus ] Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: - More MM work. 100ish more to go. Mike Rapoport's "mm: remove __ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue - Various other little subsystems * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) lib/ubsan.c: fix gcc-10 warnings tools/testing/selftests/vm: remove duplicate headers selftests: vm: pkeys: fix multilib builds for x86 selftests: vm: pkeys: use the correct page size on powerpc selftests/vm/pkeys: override access right definitions on powerpc selftests/vm/pkeys: test correct behaviour of pkey-0 selftests/vm/pkeys: introduce a sub-page allocator selftests/vm/pkeys: detect write violation on a mapped access-denied-key page selftests/vm/pkeys: associate key on a mapped page and detect write violation selftests/vm/pkeys: associate key on a mapped page and detect access violation selftests/vm/pkeys: improve checks to determine pkey support selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust() selftests/vm/pkeys: fix number of reserved powerpc pkeys selftests/vm/pkeys: introduce powerpc support selftests/vm/pkeys: introduce generic pkey abstractions selftests: vm: pkeys: use the correct huge page size selftests/vm/pkeys: fix alloc_random_pkey() to make it really random selftests/vm/pkeys: fix assertion in pkey_disable_set/clear() selftests/vm/pkeys: fix pkey_disable_clear() selftests: vm: pkeys: add helpers for pkey bits ...
-
Arnd Bergmann authored
The latest compiler expects slightly different function prototypes for the ubsan helpers: lib/ubsan.c:192:6: error: conflicting types for built-in function '__ubsan_handle_add_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 192 | void __ubsan_handle_add_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:200:6: error: conflicting types for built-in function '__ubsan_handle_sub_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 200 | void __ubsan_handle_sub_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:207:6: error: conflicting types for built-in function '__ubsan_handle_mul_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 207 | void __ubsan_handle_mul_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:214:6: error: conflicting types for built-in function '__ubsan_handle_negate_overflow'; expected 'void(void *, void *)' [-Werror=builtin-declaration-mismatch] 214 | void __ubsan_handle_negate_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:234:6: error: conflicting types for built-in function '__ubsan_handle_divrem_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 234 | void __ubsan_handle_divrem_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change the Linux implementation to match these, using a local typed pointer. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Julien Grall <julien.grall@arm.com> Link: http://lkml.kernel.org/r/20200429185948.4189600-1-arnd@arndb.deSigned-off-by:
-
Jagadeesh Pagadala authored
Code cleanup: Remove duplicate headers which are included twice. Signed-off-by:
Jagadeesh Pagadala <jagdsh.linux@gmail.com> Signed-off-by:
-
Sandipan Das authored
This ensures that both 32-bit and 64-bit binaries are generated when this is built on a x86_64 system. Most of the changes have been borrowed from tools/testing/selftests/x86/Makefile. Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Acked-by:
-
Sandipan Das authored
Both 4K and 64K pages are supported on powerpc. Parts of the selftest code perform alignment computations based on the PAGE_SIZE macro which is currently hardcoded to 64K for powerpc. This causes some test failures on kernels configured with 4K page size. In some cases, we need to enforce function alignment on page size. Since this can only be done at build time, 64K is used as the alignment factor as that also ensures 4K alignment. Signed-off-by:
-
Ram Pai authored
Some platforms hardcode the x86 values for PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE such as those in: /usr/include/bits/mman-shared.h. This overrides the definitions with correct values for powerpc. [sandipan@linux.ibm.com: fix powerpc access right definitions] Link: http://lkml.kernel.org/r/1ba86fd8a94f38131cfe2d9f277001dd1ad1d34e.1588959697.git.sandipan@linux.ibm.comSigned-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Ram Pai authored
Ensure that pkey-0 is allocated on start and that it can be attached dynamically in various modes, without failures. Signed-off-by:
-
Ram Pai authored
This introduces a new allocator that allocates 4K hardware pages to back 64K linux pages. This allocator is available only on powerpc. Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by:
-
Ram Pai authored
Detect write-violation on a page to which access-disabled key is associated much after the page is mapped. Signed-off-by:
-
Ram Pai authored
Detect write-violation on a page to which write-disabled key is associated much after the page is mapped. Signed-off-by:
-
Ram Pai authored
Detect access-violation on a page to which access-disabled key is associated much after the page is mapped. Signed-off-by:
-
Ram Pai authored
For the pkeys subsystem to work, both the CPU and the kernel need to have support. So, additionally check if the kernel supports pkeys apart from the CPU feature checks. Signed-off-by:
-
Ram Pai authored
Some pkeys which are valid on the hardware are reserved and not available for application use. These keys cannot be allocated. test_pkey_alloc_exhaust() tries to account for these and has an assertion which validates if all available pkeys have been exahaustively allocated. However, the expression that is currently used is only valid for x86. On powerpc, a pkey is additionally reserved as compared to x86. Hence, the assertion is made to use an arch-specific helper to get the correct count of reserved pkeys. Signed-off-by:
-
Desnes A. Nunes do Rosario authored
The number of reserved pkeys in a PowerNV environment is different from that on PowerVM or KVM. Tested on PowerVM and PowerNV environments. Signed-off-by:
"Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Signed-off-by:
-
Ram Pai authored
This makes use of the abstractions added earlier and introduces support for powerpc. For powerpc, after receiving the SIGSEGV, the signal handler must explicitly restore access permissions for the faulting pkey to allow the test to continue. As this makes use of pkey_access_allow(), all of its dependencies and other similar functions have been moved ahead of the signal handler. [sandipan@linux.ibm.com: fix powerpc access right updates] Link: http://lkml.kernel.org/r/5f65cf37be993760de8112a88da194e3ccbb2bf8.1588959697.git.sandipan@linux.ibm.comSigned-off-by:
-
Ram Pai authored
This introduces some generic abstractions and provides the corresponding architecture-specfic implementations for these abstractions. Signed-off-by:
-
Sandipan Das authored
The huge page size can vary across architectures. This will ensure that the correct huge page size is used when accessing the hugetlb controls under sysfs. Instead of using a hardcoded page size (i.e. 2MB), this now uses the HPAGE_SIZE macro which is arch-specific. Signed-off-by:
-
Ram Pai authored
alloc_random_pkey() was allocating the same pkey every time. Not all pkeys were geting tested. This fixes it. Signed-off-by:
-
Ram Pai authored
In some cases, a pkey's bits need not necessarily change in a way that the value of the pkey register increases when performing a pkey_disable_set() or decreases when performing a pkey_disable_clear(). For example, on powerpc, if a pkey's current state is PKEY_DISABLE_ACCESS and we perform a pkey_write_disable() on it, the bits still remain the same. We will observe something similar when the pkey's current state is 0 and a pkey_access_enable() is performed on it. Either case would cause some assertions to fail. This fixes the problem. Signed-off-by:
-
Ram Pai authored
Currently, pkey_disable_clear() sets the specified bits instead clearing them. This has been dead code up to now because its only callers i.e. pkey_access/write_allow() are also unused. Signed-off-by:
-
Sandipan Das authored
This introduces some functions that help with setting or clearing bits of a particular pkey. This also adds an abstraction for getting a pkey's bit position in the pkey register as this may vary across architectures. Signed-off-by:
-
Sandipan Das authored
The size of the pkey register can vary across architectures. This converts the data type of all its references to u64 in preparation for multi-arch support. To keep the definition of the u64 type consistent and remove format specifier related warnings, __SANE_USERSPACE_TYPES__ is defined as suggested by Michael Ellerman. Signed-off-by:
-
Thiago Jung Bauermann authored
This will help us ensure we print pkey_reg_t values correctly in different architectures. Signed-off-by:
-
Thiago Jung Bauermann authored
In preparation for multi-arch support, move definitions which have arch-specific values to x86-specific header. Signed-off-by:
-
Ram Pai authored
Moved all the generic definition and helper functions to the header file. Signed-off-by:
-
Ram Pai authored
This renames PKRU references to "pkey_reg" or "pkey" based on the usage. Signed-off-by:
-
Ram Pai authored
Patch series "selftests, powerpc, x86: Memory Protection Keys", v19. Memory protection keys enables an application to protect its address space from inadvertent access by its own code. This feature is now enabled on powerpc and has been available since 4.16-rc1. The patches move the selftests to arch neutral directory and enhance their test coverage. Tested on powerpc64 and x86_64 (Skylake-SP). This patch (of 24): Move selftest files from tools/testing/selftests/x86/ to tools/testing/selftests/vm/. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
-
