- 29 May, 2019 40 commits
-
-
Sean Young authored
Tested on WinTV-HVR-930C. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sean Young authored
Give the RC device the name of the board rather than "1-2:1.0 IR". Signed-off-by:
-
Chen-Yu Tsai authored
The A83T SoC has a camera sensor interface (known as CSI in Allwinner lingo), which is similar to the one found on the A64 and H3. The only difference seems to be that support of MIPI CSI through a connected MIPI CSI-2 bridge. Add support for this variant. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Chen-Yu Tsai authored
The A83T SoC has a camera sensor interface (known as CSI in Allwinner lingo), which is similar to the one found on the A64 and H3. The only difference seems to be that support of MIPI CSI through a connected MIPI CSI-2 bridge. Add a compatible string for this variant. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Shawn Tu authored
modify registers to fix bayer order in test pattern mode Signed-off-by:
Shawn Tu <shawnx.tu@intel.com> Signed-off-by:
-
Sakari Ailus authored
The hardware only supports 4ki pages; drop support for other sizes. Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by:
-
Sakari Ailus authored
Address C compiler, sparse and smatch warnings and little style issues in the IMGU MMU code. Signed-off-by:
-
Sakari Ailus authored
Remove redundant checks for less than zero on unsigned variables. Signed-off-by:
-
Sakari Ailus authored
Address a compiler warnings on alignment of struct ipu3_uapi_awb_fr_config_s by adding __attribute__((aligned(32))) to a struct member of that type as well. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Jonas Karlman authored
Add necessary bits to support MPEG2 decoding on RK3288. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jonas Karlman authored
Add the necessary bits to support MPEG2 decoding on RK3399. Signed-off-by:
-
Jonas Karlman authored
Only adds structs and helpers to allow supporting MPEG-2 decoding on rockchip SoCs. Support for RK3399 and RK3288 will be added in separate commits Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Rework the way controls are registered by the driver, so it can support non-standard controls, such as those used by stateless codecs. Signed-off-by:
-
Ezequiel Garcia authored
This commit adds the needed boilerplate code to support the VPU in decoding operation. Two v4l2 interfaces are exposed, one for encoding and one for decoding, but a single m2m device is shared by them, so jobs are properly serialized. Signed-off-by:
-
Boris Brezillon authored
The code in rockchip_vpu_v4l2 was hardcoded for encoder support. Modify it more generic to support the decoder case so that we can re-use the same vb2/v4l2 ops for both devices. Co-developed-by:
-
Boris Brezillon authored
When initializing a context, the core wants to reset both src and dst formats. Right now the order doesn't matter, but if we want to have a valid default width/height on the non-coded/raw format side (src in case of encoders, dst in case of decoders), we need to reset those formats in the right order: first the coded-format side, then the other, such that width and height on the raw format side can be taken from the coded format. Let's provide a helper that will reset both formats and make sure this is done in the right order. Signed-off-by:
-
Boris Brezillon authored
The V4L2/VB2 implementation for the encoder and decoder logic are very similar, so let's rename rockchip_vpu_enc.c file into rockchip_vpu_v4l2.c and remove the _enc_ part in objects/functions exposed in rockchip_vpu_v4l2.h. We also rename the enc_queue_init() function (in rockchip_vpu_drv.c) queue_init() since it will be used to initialize both type of queues. The implementation itself will be patched to support the decoding case when decoder support is added. Suggested-by:
-
Boris Brezillon authored
We're about to add prototypes for the vb2/v4l2 helpers shared by the encoder/decoder logic in this file, so let's pick a name that reflects that (rockchip_vpu_common.h was a bit to generic). Suggested-by:
-
Ezequiel Garcia authored
Introduce support for the Request API. Although the JPEG encoder does not mandate using the Request API, it's perfectly possible to use it, if the application wants to. Signed-off-by:
-
Ezequiel Garcia authored
In preparation to support decoders, using a single memory-to-memory device, we need to roll our own media controller entities registration. To do that, we define a rockchip_vpu_func object that embeds the video_device object plus all the elements that are needed to attach this vdev to the media device. Signed-off-by:
-
Boris Brezillon authored
Use the v4l2_apply_frmsize_constraints() helper instead of open-coding it. Signed-off-by:
-
Boris Brezillon authored
The rockchip VPU driver is open-coding this logic which seems pretty generic. Let's provide an helper to apply the min/max and alignment constraints on width/height. Signed-off-by:
-
Boris Brezillon authored
Width/height and 4CC formats are expressed using u32 types everywhere, let's fix the v4l2_fill_pixfmt[_mp]() prototypes to do the same. Signed-off-by:
-
Hans Verkuil authored
Commit b6c96e15 inadvertently also dropped the 'msg->len > 1' test from the preceding sanity check. This caused compliance test failures. Fixes: b6c96e15 ("media: cec: allow any initiator for Ping and Image/Text View On") Signed-off-by:
-
Kefeng Wang authored
if saa7164_proc_create() fails, saa7164_fini() will trigger a warning, name 'saa7164' WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0 ? remove_proc_entry+0x1e8/0x3a0 ? try_stop_module+0x7b/0x240 ? proc_readdir+0x70/0x70 ? rcu_read_lock_sched_held+0xd7/0x100 saa7164_fini+0x13/0x1f [saa7164] __x64_sys_delete_module+0x30c/0x480 ? __ia32_sys_delete_module+0x480/0x480 ? __x64_sys_clock_gettime+0x11e/0x1c0 ? __x64_sys_timer_create+0x1a0/0x1a0 ? trace_hardirqs_off_caller+0x40/0x180 ? do_syscall_64+0x18/0x450 do_syscall_64+0x9f/0x450 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix it by checking the return of proc_create_single() before calling remove_proc_entry(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Hans Verkuil authored
You can't memset the contents of a __user pointer. Instead, call copy_to_user to copy links.reserved (which is zeroed) to the user memory. This fixes this sparse warning: SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16: warning: incorrect type in argument 1 (different address spaces) Fixes: f4930887 ("media: media_device_enum_links32: clean a reserved field") Signed-off-by:
-
Hans Verkuil authored
The reserved field array for struct media_link_desc has length 2, not 4. And the reserved field array of struct media_links_enum was never documented at all. Signed-off-by:
-
Wen Yang authored
The call to of_find_device_by_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:60:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:63:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:72:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Signed-off-by:
-
Wen Yang authored
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/media/platform/mtk-vpu/mtk_vpu.c:477:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 464, but without a corresponding object release within this function. Signed-off-by:
-
Mauro Carvalho Chehab authored
As we did a major change on this file, let's take the moment to cleanup several coding style issues on it. This patch was partially done with the help of two tools: ./scripts/checkpatch.pl --fix-inplace --strict astyle --indent=tab=8 --style=linux But manually adjusted in order to fit our style. Signed-off-by: -
Mauro Carvalho Chehab authored
As this driver had a major change, let's take the opportunity and do some coding style cleanup, in order to make it compliant with Kernel's style. This patch was partially done with the help of two tools: ./scripts/checkpatch.pl --fix-inplace --strict astyle --indent=tab=8 --style=linux But manually adjusted in order to fit our style. Signed-off-by: -
Mauro Carvalho Chehab authored
This is a new file, so the best moment to make it to follow Kernel coding style is now. This patch was partially generated with: ./scripts/checkpatch.pl --fix-inplace --strict -f drivers/media/usb/dvb-usb/cxusb-analog.c And manually checked and adjusted to avoid any warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
Sparse complains about two issues when building with i386 and COMPILE_TEST: drivers/staging/media/allegro-dvt/allegro-core.c:1849:36: warning: constant 0xffffffff00000000UL is so big it is unsigned long long drivers/staging/media/allegro-dvt/allegro-core.c:865:24: error: incompatible types in comparison expression (different type sizes) Signed-off-by: -
Hans Verkuil authored
nal-h264.h is a local header, not a global one. Use "" instead of <>. Fixed this compile error: CC drivers/staging/media/allegro-dvt/nal-h264.o drivers/staging/media/allegro-dvt/nal-h264.c:24:10: fatal error: nal-h264.h: No such file or directory #include <nal-h264.h> ^~~~~~~~~~~~ Signed-off-by:Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Hans Verkuil authored
In vb2_vmalloc_get_userptr() the framevector is created with the 'write' argument set to false when vb2_create_framevec() is called for OUTPUT buffers. So the pages are marked as read-only. However, userspace will write to these buffers since it will fill in the data to output. Since get_userptr is only called if the userptr of the queued buffer has changed since the last time that same buffer was queued, this will fail when the buffer contents is updated and the buffer is queued again. E.g., userspace fills buffer 1 with the output video and queues it. The first time get_userptr is called and the pages are grabbed and pinned in memory and marked read-only. The second time buffer 1 is filled with different video data and queued again. Since the userptr hasn't changed the get_userptr() callback isn't called again. Since the pages were marked as read-only the new contents isn't updated. Just always call vb2_create_framevec() with FOLL_WRITE to always allow writing to the buffers. Using USERPTR streaming with OUTPUT devices is almost never done. And when it is done it is via v4l2-compliance and a driver like vim2m. But since v4l2-compliance doesn't actually inspect the capture buffer and compare it to the original output buffer, this issue was never noticed. But the vicodec driver actually needs to parse the bitstream in the OUTPUT buffers and any errors there will be immediately noticed. So this time v4l2-compliance failed the USERPTR streaming test. Signed-off-by:
-
Michael Tretter authored
The allegro hardware encoder does not write SPS/PPS nal units into the encoded video stream. Therefore, we need to write the units in software. The implementation follows Rec. ITU-T H.264 (04/2017) to allow to convert between a C struct and the RBSP representation of the SPS and PPS nal units. The allegro driver writes the nal units into the v4l2 capture buffer in front of the actual video data which is written at an offset by the IP core. The remaining gap is filled with a filler nal unit. [hverkuil-cisco@xs4all.nl: added missing @dev description for nal_h264_read_sps()] [mchehab+samsung@kernel.org: removed uneeded "-ccflags-y $(src)" from Makefile] Signed-off-by:
-
Michael Tretter authored
Add a V4L2 mem-to-mem driver for Allegro DVT video IP cores as found in the EV family of the Xilinx ZynqMP SoC. The Zynq UltraScale+ Device Technical Reference Manual uses the term VCU (Video Codec Unit) for the encoder, decoder and system integration block. This driver takes care of interacting with the MicroBlaze MCU that controls the actual IP cores. The IP cores and MCU are integrated in the FPGA. The xlnx_vcu driver is responsible for configuring the clocks and providing information about the codec configuration. The driver currently only supports the H.264 video encoder. Signed-off-by:
-
Michael Tretter authored
Add vendor prefix for Allegro DVT, a provider of H.264/AVC, H.265/HEVC, AVS2, VP9 and AV1 compliance test suites and H.264/AVC, H.265/HEVC, and VP9 encoder, codec and decoder hardware (RTL) IPs. Signed-off-by:
-
Michael Tretter authored
Add device-tree bindings for the Allegro DVT video IP core found on the Xilinx ZynqMP EV family. Signed-off-by:
-
Hans Verkuil authored
last_buffer_dequeued was set to true in __fill_v4l2_buffer, but this is called for qbuf as well. Move it to vb2_dqbuf. Signed-off-by:
-
