- 02 Oct, 2020 40 commits
-
-
Christophe JAILLET authored
There is no need to use GFP_ATOMIC here. It is a probe function, no spinlock is taken. Reviewed-by:
JC Kuo <jckuo@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <balbi@kernel.org>
-
Peter Chen authored
Current UDC core connects gadget during the loading gadget flow (udc_bind_to_driver->usb_udc_connect_control), but for platforms which do not connect gadget if the VBUS is not there, they call usb_gadget_disconnect, but the gadget is not connected at this time, notify disconnecton for the gadget driver is meaningless at this situation. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Thinh Nguyen authored
Refactor END_TRANSFER command completion handling and move it outside of the switch statement to its own function. This makes it cleaner and consistent with other event handler functions. No functional change here. Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Remove unused 'udc' variable to fix compile warnings: drivers/usb/gadget/udc/s3c2410_udc.c: In function 's3c2410_udc_dequeue': drivers/usb/gadget/udc/s3c2410_udc.c:1268:22: warning: variable 'udc' set but not used [-Wunused-but-set-variable] Reviewed-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Li Jun authored
Do not try to queue a drd work for change mode if the port is not a drd, this is to avoid below kernel dump: [ 60.115529] ------------[ cut here ]------------ [ 60.120166] WARNING: CPU: 1 PID: 627 at kernel/workqueue.c:1473 __queue_work+0x46c/0x520 [ 60.128254] Modules linked in: [ 60.131313] CPU: 1 PID: 627 Comm: sh Not tainted 5.7.0-rc4-00022-g914a586-dirty #135 [ 60.139054] Hardware name: NXP i.MX8MQ EVK (DT) [ 60.143585] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 60.148376] pc : __queue_work+0x46c/0x520 [ 60.152385] lr : __queue_work+0x314/0x520 [ 60.156393] sp : ffff8000124ebc40 [ 60.159705] x29: ffff8000124ebc40 x28: ffff800011808018 [ 60.165018] x27: ffff800011819ef8 x26: ffff800011d39980 [ 60.170331] x25: ffff800011808018 x24: 0000000000000100 [ 60.175643] x23: 0000000000000013 x22: 0000000000000001 [ 60.180955] x21: ffff0000b7c08e00 x20: ffff0000b6c31080 [ 60.186267] x19: ffff0000bb99bc00 x18: 0000000000000000 [ 60.191579] x17: 0000000000000000 x16: 0000000000000000 [ 60.196891] x15: 0000000000000000 x14: 0000000000000000 [ 60.202202] x13: 0000000000000000 x12: 0000000000000000 [ 60.207515] x11: 0000000000000000 x10: 0000000000000040 [ 60.212827] x9 : ffff800011d55460 x8 : ffff800011d55458 [ 60.218138] x7 : ffff0000b7800028 x6 : 0000000000000000 [ 60.223450] x5 : ffff0000b7800000 x4 : 0000000000000000 [ 60.228762] x3 : ffff0000bb997cc0 x2 : 0000000000000001 [ 60.234074] x1 : 0000000000000000 x0 : ffff0000b6c31088 [ 60.239386] Call trace: [ 60.241834] __queue_work+0x46c/0x520 [ 60.245496] queue_work_on+0x6c/0x90 [ 60.249075] dwc3_set_mode+0x48/0x58 [ 60.252651] dwc3_mode_write+0xf8/0x150 [ 60.256489] full_proxy_write+0x5c/0xa8 [ 60.260327] __vfs_write+0x18/0x40 [ 60.263729] vfs_write+0xdc/0x1c8 [ 60.267045] ksys_write+0x68/0xf0 [ 60.270360] __arm64_sys_write+0x18/0x20 [ 60.274286] el0_svc_common.constprop.0+0x68/0x160 [ 60.279077] do_el0_svc+0x20/0x80 [ 60.282394] el0_sync_handler+0x10c/0x178 [ 60.286403] el0_sync+0x140/0x180 [ 60.289716] ---[ end trace 70b155582e2b7988 ]--- Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
Li Jun authored
Add the phy cleanup if dwc3 mode init fail, which is the missing part of de-init for dwc3 core init. Fixes: c499ff71 ("usb: dwc3: core: re-factor init and exit paths") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Li Jun authored
No need to trigger runtime pm in driver removal, otherwise if user disable auto suspend via sys file, runtime suspend may be entered, which will call dwc3_core_exit() again and there will be clock disable not balance warning: [ 2026.820154] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 2026.825268] usb usb2: USB disconnect, device number 1 [ 2026.831017] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 2026.836806] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 2026.842029] usb usb1: USB disconnect, device number 1 [ 2026.848029] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 2026.865889] ------------[ cut here ]------------ [ 2026.870506] usb2_ctrl_root_clk already disabled [ 2026.875082] WARNING: CPU: 0 PID: 731 at drivers/clk/clk.c:958 clk_core_disable+0xa0/0xa8 [ 2026.883170] Modules linked in: dwc3(-) phy_fsl_imx8mq_usb [last unloaded: dwc3] [ 2026.890488] CPU: 0 PID: 731 Comm: rmmod Not tainted 5.8.0-rc7-00280-g9d08cca-dirty #245 [ 2026.898489] Hardware name: NXP i.MX8MQ EVK (DT) [ 2026.903020] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) [ 2026.908594] pc : clk_core_disable+0xa0/0xa8 [ 2026.912777] lr : clk_core_disable+0xa0/0xa8 [ 2026.916958] sp : ffff8000121b39a0 [ 2026.920271] x29: ffff8000121b39a0 x28: ffff0000b11f3700 [ 2026.925583] x27: 0000000000000000 x26: ffff0000b539c700 [ 2026.930895] x25: 000001d7e44e1232 x24: ffff0000b76fa800 [ 2026.936208] x23: ffff0000b76fa6f8 x22: ffff800008d01040 [ 2026.941520] x21: ffff0000b539ce00 x20: ffff0000b7105000 [ 2026.946832] x19: ffff0000b7105000 x18: 0000000000000010 [ 2026.952144] x17: 0000000000000001 x16: 0000000000000000 [ 2026.957456] x15: ffff0000b11f3b70 x14: ffffffffffffffff [ 2026.962768] x13: ffff8000921b36f7 x12: ffff8000121b36ff [ 2026.968080] x11: ffff8000119e1000 x10: ffff800011bf26d0 [ 2026.973392] x9 : 0000000000000000 x8 : ffff800011bf3000 [ 2026.978704] x7 : ffff800010695d68 x6 : 0000000000000252 [ 2026.984016] x5 : ffff0000bb9881f0 x4 : 0000000000000000 [ 2026.989327] x3 : 0000000000000027 x2 : 0000000000000023 [ 2026.994639] x1 : ac2fa471aa7cab00 x0 : 0000000000000000 [ 2026.999951] Call trace: [ 2027.002401] clk_core_disable+0xa0/0xa8 [ 2027.006238] clk_core_disable_lock+0x20/0x38 [ 2027.010508] clk_disable+0x1c/0x28 [ 2027.013911] clk_bulk_disable+0x34/0x50 [ 2027.017758] dwc3_core_exit+0xec/0x110 [dwc3] [ 2027.022122] dwc3_suspend_common+0x84/0x188 [dwc3] [ 2027.026919] dwc3_runtime_suspend+0x74/0x9c [dwc3] [ 2027.031712] pm_generic_runtime_suspend+0x28/0x40 [ 2027.036419] genpd_runtime_suspend+0xa0/0x258 [ 2027.040777] __rpm_callback+0x88/0x140 [ 2027.044526] rpm_callback+0x20/0x80 [ 2027.048015] rpm_suspend+0xd0/0x418 [ 2027.051503] __pm_runtime_suspend+0x58/0xa0 [ 2027.055693] dwc3_runtime_idle+0x7c/0x90 [dwc3] [ 2027.060224] __rpm_callback+0x88/0x140 [ 2027.063973] rpm_idle+0x78/0x150 [ 2027.067201] __pm_runtime_idle+0x58/0xa0 [ 2027.071130] dwc3_remove+0x64/0xc0 [dwc3] [ 2027.075140] platform_drv_remove+0x28/0x48 [ 2027.079239] device_release_driver_internal+0xf4/0x1c0 [ 2027.084377] driver_detach+0x4c/0xd8 [ 2027.087954] bus_remove_driver+0x54/0xa8 [ 2027.091877] driver_unregister+0x2c/0x58 [ 2027.095799] platform_driver_unregister+0x10/0x18 [ 2027.100509] dwc3_driver_exit+0x14/0x1408 [dwc3] [ 2027.105129] __arm64_sys_delete_module+0x178/0x218 [ 2027.109922] el0_svc_common.constprop.0+0x68/0x160 [ 2027.114714] do_el0_svc+0x20/0x80 [ 2027.118031] el0_sync_handler+0x88/0x190 [ 2027.121953] el0_sync+0x140/0x180 [ 2027.125267] ---[ end trace 027f4f8189958f1f ]--- [ 2027.129976] ------------[ cut here ]------------ Fixes: fc8bb91b ("usb: dwc3: implement runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Peter Chen authored
We have already allocated gadget structure dynamically at UDC (dwc3) driver, so commit fac32347 ("usb: udc: allow adding and removing the same gadget device")could be reverted. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Peter Chen authored
The current code uses commit fac32347 ("usb: udc: allow adding and removing the same gadget device") as the workaround to let the gadget device is re-used, but it is not allowed from driver core point. In this commit, we allocate gadget structure dynamically, and free it at its release function. Since the gadget device's driver_data has already occupied by usb_composite_dev structure, we have to use gadget device's platform data to store dwc3 structure. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
-
Peter Chen authored
If cdns3_gadget_start is failed, it never frees cdns3_device structure. Meanwhile, there is no release function for gadget device, it causes there is no sync with driver core. To fix this, we add release function for gadget device, and free cdns3_device structure at there. Meanwhile, With the new UDC core APIs, we could work with driver core better to handle memory leak issue. Reviewed-by:
-
Alan Stern authored
Like net2280 (on which it was based), the net2272 UDC driver has a problem with leaking memory along some of its failure pathways. It also has another problem, not previously noted, in that some of the failure pathways will call usb_del_gadget_udc() without first calling usb_add_gadget_udc_release(). And it leaks memory by calling kfree() when it should call put_device(). Until now it has been impossible to handle the memory leaks, because of lack of support in the UDC core for separately initializing and adding gadgets, or for separately deleting and freeing gadgets. An earlier patch in this series adds the necessary support, making it possible to fix the outstanding problems properly. This patch adds an "added" flag to the net2272 structure to indicate whether or not the gadget has been registered (and thus whether or not to call usb_del_gadget()), and it fixes the deallocation issues by calling usb_put_gadget() at the appropriate places. A similar memory leak issue, apparently never before recognized, stems from the fact that the driver never initializes the drvdata field in the gadget's embedded struct device! Evidently this wasn't noticed because the pointer is only ever used as an argument to kfree(), which doesn't mind getting called with a NULL pointer. In fact, the drvdata for gadget device will be written by usb_composite_dev structure if any gadget class is loaded, so it needs to use usb_gadget structure to get net2280 private data. CC: Anton Vasilyev <vasilyev@ispras.ru> CC: Evgeny Novikov <novikov@ispras.ru> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
-
Alan Stern authored
As Anton and Evgeny have noted, the net2280 UDC driver has a problem with leaking memory along some of its failure pathways. It also has another problem, not previously noted, in that some of the failure pathways will call usb_del_gadget_udc() without first calling usb_add_gadget_udc_release(). And it leaks memory by calling kfree() when it should call put_device(). Previous attempts to fix the problems have failed because of lack of support in the UDC core for separately initializing and adding gadgets, or for separately deleting and freeing gadgets. The previous patch in this series adds the necessary support, making it possible to fix the outstanding problems properly. This patch adds an "added" flag to the net2280 structure to indicate whether or not the gadget has been registered (and thus whether or not to call usb_del_gadget()), and it fixes the deallocation issues by calling usb_put_gadget() at the appropriate point. A similar memory leak issue, apparently never before recognized, stems from the fact that the driver never initializes the drvdata field in the gadget's embedded struct device! Evidently this wasn't noticed because the pointer is only ever used as an argument to kfree(), which doesn't mind getting called with a NULL pointer. In fact, the drvdata for gadget device will be written by usb_composite_dev structure if any gadget class is loaded, so it needs to use usb_gadget structure to get net2280 private data. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by:
Anton Vasilyev <vasilyev@ispras.ru> Reported-by:
Evgeny Novikov <novikov@ispras.ru> Reviewed-by:
-
Alan Stern authored
The routines used by the UDC core to interface with the kernel's device model, namely usb_add_gadget_udc(), usb_add_gadget_udc_release(), and usb_del_gadget_udc(), provide access to only a subset of the device model's full API. They include functionality equivalent to device_register() and device_unregister() for gadgets, but they omit device_initialize(), device_add(), device_del(), get_device(), and put_device(). This patch expands the UDC API by adding usb_initialize_gadget(), usb_add_gadget(), usb_del_gadget(), usb_get_gadget(), and usb_put_gadget() to fill in the gap. It rewrites the existing routines to call the new ones. CC: Anton Vasilyev <vasilyev@ispras.ru> CC: Evgeny Novikov <novikov@ispras.ru> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
-
Peter Chen authored
It is found by sparse. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Ye Bin authored
udc_controller->irq is "unsigned int" always >= 0, but platform_get_irq may return little than zero. So "dc_controller->irq < 0" condition is never accessible. Acked-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Lorenzo Colitti authored
The u_ether driver has a qmult setting that multiplies the transmit queue length (which by default is 2). The intent is that it should be enabled at high/super speed, but because the code does not explicitly check for USB_SUPER_PLUS, it is disabled at that speed. Fix this by ensuring that the queue multiplier is enabled for any wired link at high speed or above. Using >= for USB_SPEED_* constants seems correct because it is what the gadget_is_xxxspeed functions do. The queue multiplier substantially helps performance at higher speeds. On a direct SuperSpeed Plus link to a Linux laptop, iperf3 single TCP stream: Before (qmult=1): 1.3 Gbps After (qmult=5): 3.2 Gbps Fixes: 04617db7 ("usb: gadget: add SS descriptors to Ethernet gadget") Reviewed-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Yoshihiro Shimoda authored
The commit aba3a8d0 ("usb: gadget: u_serial: add suspend resume callbacks") set/cleared the suspended flag in USB bus suspend/resume only. But, when a USB cable is disconnected in the suspend, since some controllers will not detect USB bus resume, the suspended flag is not cleared. After that, user cannot send any data. To fix the issue, clears the suspended flag in the gserial_disconnect(). Fixes: aba3a8d0 ("usb: gadget: u_serial: add suspend resume callbacks") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
Linh Phung <linh.phung.jy@renesas.com> Tested-by:
Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by:
-
Randy Dunlap authored
Fix typo/spello of "function". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: linux-usb@vger.kernel.org Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by:
-
Lorenzo Colitti authored
Currently, enabling f_ncm at SuperSpeed Plus speeds results in an oops in config_ep_by_speed because ncm_set_alt passes in NULL ssp_descriptors. Fix this by re-using the SuperSpeed descriptors. This is safe because usb_assign_descriptors calls usb_copy_descriptors. Tested: enabled f_ncm on a dwc3 gadget and 10Gbps link, ran iperf Reviewed-by:
-
Lorenzo Colitti authored
This improves performance on fast connections. When directly connecting to a Linux laptop running 5.6, single-stream iperf3 goes from ~1.7Gbps to ~2.3Gbps out, and from ~620Mbps to ~720Mbps in. Reviewed-by:
-
Lorenzo Colitti authored
Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to assume 16 packets per microframe, and USB 3 and above no longer use microframes. Maximum speed is actually much higher. On a direct connection, theoretical throughput is at most 3.86 Gbps for gen1x1 and 9.36 Gbps for gen2x1, and I have seen gadget->host iperf throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1. Unfortunately the ConnectionSpeedChange defined in the CDC spec only uses 32-bit values, so we can't report accurate numbers for 10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is roughly maximum theoretical performance) and 4.25Gbps for SuperSpeed Plus (which is close to the maximum that we can report in a 32-bit unsigned integer). This results in: [50879.191272] cdc_ncm 2-2:1.0 enx228b127e050c: renamed from usb0 [50879.234778] cdc_ncm 2-2:1.0 enx228b127e050c: 3750 mbit/s downlink 3750 mbit/s uplink on SuperSpeed and: [50798.434527] cdc_ncm 8-2:1.0 enx228b127e050c: renamed from usb0 [50798.524278] cdc_ncm 8-2:1.0 enx228b127e050c: 4250 mbit/s downlink 4250 mbit/s uplink on SuperSpeed Plus. Fixes: 16501138 ("usb: gadget: f_ncm: add SuperSpeed descriptors for CDC NCM") Reviewed-by:
-
Peter Chen authored
After commit f4cfe5ce ("usb: cdns3: gadget: improve the set_configuration handling"), the software will inform the hardware the request has finished at cdns3_ep0_complete_setup. The configuration set bit is only set after request has finished, so it needs to move waiting operation after that. Meanwhile, if it is timeout, it will show warning message and return error. Signed-off-by:
-
Peter Chen authored
Some PHYs may need to enter related mode, and do some settings. Signed-off-by:
-
Peter Chen authored
It is meaningless to handle any interrupts after disconnecting with host Signed-off-by:
-
Peter Chen authored
Below is the recommendation from Cadence designer: Using this bit to be sure that PHY clock is keeping up in active state. It's good to keep Fast Access bit enabled as long as there is any access to USB register. It is used to fix the potential ARM core hang when visit controller register after DEVDS (.pullup is cleared) is set, the threaded irq may be scheduled at that time. Cc: Pawel Laszczak <pawell@cadence.com> Reviewed-by:
-
Peter Chen authored
If the board uses role switch class for switching the role, it should not depends on SoC OTG hardware siginal any more, so quit early. Signed-off-by:
-
Raymond Tan authored
Similar to some other IA platforms, Elkhart Lake too depends on the PMU register write to request transition of Dx power state. Thus, we add the PCI_DEVICE_ID_INTEL_EHLLP to the list of devices that shall execute the ACPI _DSM method during D0/D3 sequence. [heikki.krogerus@linux.intel.com: included Fixes tag] Fixes: dbb0569d ("usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices") Cc: stable@vger.kernel.org Signed-off-by:
Raymond Tan <raymond.tan@intel.com> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Marc Zyngier authored
If the dwc2 driver fails to probe after having enabled the regulators, it ends up being unregistered with regulators enabled, something the core regulator code is legitimately upset about: dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator dwc2 ff400000.usb: dwc2_core_reset: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE WARNING: CPU: 2 PID: 112 at drivers/regulator/core.c:2074 _regulator_put.part.0+0x16c/0x174 Modules linked in: dwc2(E+) dwc3(E) udc_core(E) rtc_hym8563(E) dwmac_generic(E) ulpi(E) usbcore(E) dwc3_meson_g12a(E) roles(E) meson_gx_mmc(E+) i2c_meson(E) mdio_mux_meson_g12a(E) mdio_mux(E) dwmac_meson8b(E) stmmac_platform(E) stmmac(E) mdio_xpcs(E) phylink(E) of_mdio(E) fixed_phy(E) libphy(E) pwm_regulator(E) fixed(E) CPU: 2 PID: 112 Comm: systemd-udevd Tainted: G E 5.9.0-rc4-00102-g423583bc8cf9 #1840 Hardware name: amlogic w400/w400, BIOS 2020.04 05/22/2020 pstate: 80400009 (Nzcv daif +PAN -UAO BTYPE=--) pc : _regulator_put.part.0+0x16c/0x174 lr : regulator_bulk_free+0x6c/0x9c sp : ffffffc012353820 x29: ffffffc012353820 x28: ffffff805a4b7000 x27: ffffff8059c2eac0 x26: ffffff8059c2e810 x25: ffffff805a4b7d00 x24: ffffffc008cf3028 x23: ffffffc011729ef8 x22: ffffff807e2761d8 x21: ffffffc01171df78 x20: ffffff805a4b7700 x19: ffffff805a4b7700 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: ffffff807ea8d178 x14: 3935312820435455 x13: 2038323a36313a37 x12: ffffffffffffffff x11: 0000000000000040 x10: 0000000000000007 x9 : ffffffc0106f77d0 x8 : ffffffffffffffe0 x7 : ffffffffffffffff x6 : 0000000000017702 x5 : ffffff805a4b7400 x4 : 0000000000000000 x3 : ffffffc01171df78 x2 : ffffff807ea8cc40 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: _regulator_put.part.0+0x16c/0x174 regulator_bulk_free+0x6c/0x9c devm_regulator_bulk_release+0x28/0x3c release_nodes+0x1c8/0x2c0 devres_release_all+0x44/0x6c really_probe+0x1ec/0x504 driver_probe_device+0x100/0x170 device_driver_attach+0xcc/0xd4 __driver_attach+0xb0/0x17c bus_for_each_dev+0x7c/0xd4 driver_attach+0x30/0x3c bus_add_driver+0x154/0x250 driver_register+0x84/0x140 __platform_driver_register+0x54/0x60 dwc2_platform_driver_init+0x2c/0x1000 [dwc2] do_one_initcall+0x54/0x2d0 do_init_module+0x68/0x29c In order to fix this, tie the regulator disabling to the teardown process by registering a devm action callback. This makes sure that the regulators are disabled at the right time (just before they are released). Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Pawel Laszczak authored
This patch replace config_ep_by_speed with config_ep_by_speed_and_alt. This change allows to select proper usb_ss_ep_comp_descriptor for each stream capable endpoints. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to bot_uasp_ss_bi_desc. And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by:Jayshri Pawar <jpawar@cadence.com> Signed-off-by:
Pawel Laszczak <pawell@cadence.com> Reviewed-by:
-
Qinglang Miao authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Christian Lamparter authored
adds the specific compatible string for the DWC2 IP found in the APM82181 SoCs. The IP is setup correctly through the auto detection... With the exception of the AHB Burst Size. The default of GAHBCFG_HBSTLEN_INCR4 of the "snps,dwc2" can cause a system hang when the USB and SATA is used concurrently. Because the predecessor (PPC460EX (Canyonlands)) already had the same problem, this SoC can make use of the existing dwc2_set_amcc_params() function. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
adds the specific compatible string for the DWC2 IP found in the APM82181 SoCs. The APM82181's USB-OTG seems like it was taken from its direct predecessor: the PPC460EX (canyonlands). Signed-off-by:
-
Bryan O'Donoghue authored
commit 2b74b0a0 ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()") adds important bounds checking however it unfortunately also introduces a bug with respect to section 3.3.1 of the NCM specification. wDatagramIndex[1] : "Byte index, in little endian, of the second datagram described by this NDP16. If zero, then this marks the end of the sequence of datagrams in this NDP16." wDatagramLength[1]: "Byte length, in little endian, of the second datagram described by this NDP16. If zero, then this marks the end of the sequence of datagrams in this NDP16." wDatagramIndex[1] and wDatagramLength[1] respectively then may be zero but that does not mean we should throw away the data referenced by wDatagramIndex[0] and wDatagramLength[0] as is currently the case. Breaking the loop on (index2 == 0 || dg_len2 == 0) should come at the end as was previously the case and checks for index2 and dg_len2 should be removed since zero is valid. I'm not sure how much testing the above patch received but for me right now after enumeration ping doesn't work. Reverting the commit restores ping, scp, etc. The extra validation associated with wDatagramIndex[0] and wDatagramLength[0] appears to be valid so, this change removes the incorrect restriction on wDatagramIndex[1] and wDatagramLength[1] restoring data processing between host and device. Fixes: 2b74b0a0 ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()") Cc: Ilja Van Sprundel <ivansprundel@ioactive.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Pawel Laszczak authored
USB2.0 PHY hangs in Rx Compliance test when the incoming packet amplitude is varied below and above the Squelch Level of Receiver during the active packet multiple times. Version 1 of the controller allows PHY to be reset when RX fail condition is detected to work around the above issue. This feature is disabled by default and needs to be enabled using a bit from the newly added PHYRST_CFG register. This patch enables the workaround. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we rely on a DT property do decide when to apply the workaround. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Roger Quadros authored
Controller version 0x0002450D has USB2 PHY RX sensitivity issues that needs to be worked around by enabling phyrst-a-enable bit in PHYRST_CFG register. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we add this DT property. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Roger Quadros authored
Converts cdns-usb3.txt to YAML schema cdns,usb3.yaml Reviewed-by:
-
Neil Armstrong authored
The Amlogic AXG is close to the GXL Glue but with a single OTG PHY. It needs the same init sequence as GXL & GXM, but it seems it doesn't need the host disconnect bit. Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
The Amlogic AXG is close to the GXL Glue but with a single OTG PHY. Reviewed-by:
-
Lad Prabhakar authored
Document r8a774e1 xhci support. The driver will use the fallback compatible string "renesas,rcar-gen3-xhci", therefore no driver change is needed. Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Linus Walleij authored
This switches the PCH UDC driver to use GPIO descriptors. The way this is supposed to be used is confusing. The code contains the following: /* GPIO port for VBUS detecting */ static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */ So a hardcoded GPIO number in the code. Further the probe() path very clearly will exit if the GPIO is not found, so this driver can only be configured by editing the code, hard-coding a GPIO number into this variable. This is simply not how we do things. My guess is that this is used in products by patching a GPIO number into this variable and shipping a kernel that is compile-time tailored for the target system. I switched this mechanism to using a GPIO descriptor associated with the parent PCI device. This can be added by using the 16bit subsystem ID or similar to identify which exact machine we are running on and what GPIO is present on that machine, and then add a GPIO descriptor using gpiod_add_lookup_table() from <linux/gpio/machine.h>. Since I don't have any target systems I cannot add this but I'm happy to help. I put in a FIXME so the people actually using this driver knows what to do. Cc: Felipe Balbi <balbi@kernel.org> Tested-by:Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
