- 06 Feb, 2022 1 commit
-
-
Christoph Niedermaier authored
In the function panel_simple_probe() the pointer panel->desc is assigned to the passed pointer desc. If function panel_dpi_probe() is called panel->desc will be updated, but further on only desc will be evaluated. So update the desc pointer to be able to use the data from the function panel_dpi_probe(). Fixes: 4a1d0dbc ("drm/panel: simple: add panel-dpi support") Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> To: dri-devel@lists.freedesktop.org Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
-
- 03 Feb, 2022 5 commits
-
-
Dave Stevenson authored
The 2711 pixel valve can't produce odd horizontal timings, and checks were added to vc4_hdmi_encoder_atomic_check and vc4_hdmi_encoder_mode_valid to filter out/block selection of such modes. Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing values before programming them into the PV. The PV values, therefore, can not be odd, and so the modes can be supported. Amend the filtering appropriately. Fixes: 57fb32e6 ("drm/vc4: hdmi: Block odd horizontal timings") Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
-
Dave Stevenson authored
The code that set the scdc_enabled flag to ensure it was disabled at boot time also ran on Pi0-3 where there is no SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable due to vc4_hdmi_disable_scrambling being called and trying to read (and write) register HDMI_SCRAMBLER_CTL which doesn't exist on those platforms. Only set the flag should the interface be configured to support more than HDMI 1.4. Fixes: 19986461 ("drm/vc4: hdmi: Introduce a scdc_enabled flag") Signed-off-by:
-
Dave Stevenson authored
The existing logic was flawed in that it could try reading the 2711 specific registers for HPD on a CM1/3 where the HPD GPIO hadn't been defined in DT. Ensure we don't do the 2711 register read on invalid hardware, and then Signed-off-by:
-
Yizhuo Zhai authored
In function do_fb_ioctl(), the "arg" is the type of unsigned long, and in "case FBIOBLANK:" this argument is casted into an int before passig to fb_blank(). In fb_blank(), the comparision if (blank > FB_BLANK_POWERDOWN) would be bypass if the original "arg" is a large number, which is possible because it comes from the user input. Fix this by adding the check before the function call. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Yizhuo Zhai <yzhai003@ucr.edu> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202235811.1621017-1-yzhai003@ucr.edu
-
Alexander Stein authored
mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead. Fixes: b776b0f0 ("drm: mxsfb: Use bus_format from the nearest bridge if present") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
- 02 Feb, 2022 3 commits
-
-
Helge Deller authored
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by:
-
Helge Deller authored
This reverts commit 39aead83. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by:
-
Helge Deller authored
This reverts commit b3ec8cdf. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by:
-
- 01 Feb, 2022 1 commit
-
-
Jordy Zomer authored
It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. Signed-off-by:
Jordy Zomer <jordy@pwning.systems> Fixes: c02a81fb ("dma-buf: Add dma-buf heaps framework") Cc: <stable@vger.kernel.org> # v5.6+ Acked-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> [sumits: added fixes and cc: stable tags] Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems
-
- 31 Jan, 2022 1 commit
-
-
Nick Lopez authored
Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by:
Nick Lopez <github@glowingmonkey.org> Fixes: 4d4e9907 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by:
Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
- 27 Jan, 2022 1 commit
-
-
Anitha Chrisanthus authored
This fixes the following build error drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable': drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 165 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 162 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ Fixes: 7f7b96a8 ("drm/kmb: Add support for KeemBay Display") Signed-off-by:
Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220127194227.2213608-1-anitha.chrisanthus@intel.com
-
- 26 Jan, 2022 3 commits
-
-
Tong Zhang authored
when acpi=off is provided in bootarg, kernel crash with [ 1.252739] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 1.258308] Call Trace: [ 1.258490] ? acpi_walk_namespace+0x147/0x147 [ 1.258770] acpi_get_devices+0xe4/0x137 [ 1.258921] ? drm_core_init+0xc0/0xc0 [drm] [ 1.259108] detect_thinkpad_privacy_screen+0x5e/0xa8 [drm] [ 1.259337] drm_privacy_screen_lookup_init+0xe/0xe85 [drm] The reason is that acpi_walk_namespace expects acpi related stuff initialized but in fact it wouldn't when acpi is set to off. In this case we should honor acpi=off in detect_thinkpad_privacy_screen(). Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dave Airlie authored
This reverts commit 9bb7b689. This caused a regression reported to Red Hat. Fixes: 9bb7b689 ("drm/ast: Support 1600x900 with 108MHz PCLK") Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220120040527.552068-1-airlied@gmail.com
-
Thomas Zimmermann authored
Backmerging drm/drm-fixes into drm-misc-fixes for v5.17-rc1. Signed-off-by:
-
- 25 Jan, 2022 1 commit
-
-
Manasi Navare authored
In case of a modeset where a mode gets split across multiple CRTCs in the driver specific implementation (bigjoiner in i915) we wrongly count the affected CRTCs based on the drm_crtc_mask and indicate the stolen CRTC as an affected CRTC in atomic_check_only(). This triggers a warning since affected CRTCs doent match requested CRTC. To fix this in such bigjoiner configurations, we should only increment affected crtcs if that CRTC is enabled in UAPI not if it is just used internally in the driver to split the mode. v3: Add the same uapi crtc_state->enable check in requested crtc calc (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Simon Ser <contact@emersion.fr> Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.11+ Fixes: 919c2299 ("drm/i915: Enable bigjoiner") Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004115913.23889-1-manasi.d.navare@intel.com
-
- 23 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 18 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
Masahiro Yamada authored
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by:
-
Masahiro Yamada authored
This reverts commit cd8c917a. Commit 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf") provided the final solution. Now reverting the temporary workaround. Signed-off-by:
-
Dmitry V. Levin authored
As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: - multichannel fixes, addressing additional reconnect and DFS scenarios - reenabling fscache support (indexing rewrite, metadata caching e.g.) - send additional version information during NTLMSSP negotiate to improve debugging - fix for a mount race - DFS fixes - fix for a memory leak for stable * tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number smb3: send NTLMSSP version information cifs: Support fscache indexing rewrite cifs: cifs_ses_mark_for_reconnect should also update reconnect bits cifs: update tcpStatus during negotiate and sess setup cifs: make status checks in version independent callers cifs: remove repeated state change in dfs tree connect cifs: fix the cifs_reconnect path for DFS cifs: remove unused variable ses_selected cifs: protect all accesses to chan_* with chan_lock cifs: fix the connection state transitions with multichannel cifs: check reconnects for channels of active tcons too smb3: add new defines from protocol specification cifs: serialize all mount attempts cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty cifs: clean up an inconsistent indenting cifs: free ntlmsspblob allocated in negotiate
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "One of the patches removes some dead code from xfs_ioctl32.h and the other fixes broken workqueue flushing in the inode garbage collector. - Minor cleanup of ioctl32 cruft - Clean up open coded inodegc workqueue function calls" * tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: flush inodegc workqueue tasks before cancel xfs: remove unused xfs_ioctl32.h declarations
-
Linus Torvalds authored
Merge tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull more fscache updates from David Howells: "A set of fixes and minor updates for the fscache rewrite: - Fix mishandling of volume collisions (the wait condition is inverted and so it was only waiting if the volume collision was already resolved). - Fix miscalculation of whether there's space available in cachefiles. - Make sure a default cache name is set on a cache if the user hasn't set one by the time they bind the cache. - Adjust the way the backing inode is presented in tracepoints, add a tracepoint for mkdir and trace directory lookup. - Add a tracepoint for failure to set the active file mark. - Add an explanation of the checks made on the backing filesystem. - Check that the backing filesystem supports tmpfile. - Document how the page-release cancellation of the read-skip optimisation works. And I've included a change for netfslib: - Make ops->init_rreq() optional" * tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: netfs: Make ops->init_rreq() optional fscache: Add a comment explaining how page-release optimisation works cachefiles: Check that the backing filesystem supports tmpfiles cachefiles: Explain checks in a comment cachefiles: Trace active-mark failure cachefiles: Make some tracepoint adjustments cachefiles: set default tag name if it's unspecified cachefiles: Calculate the blockshift in terms of bytes, not pages fscache: Fix the volume collision wait condition
-
git://git.infradead.org/users/willy/pagecacheLinus Torvalds authored
Pull more folio updates from Matthew Wilcox: "Three small folio patches. One bug fix, one patch pulled forward from the patches destined for 5.18 and then a patch to make use of that functionality" * tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache: filemap: Use folio_put_refs() in filemap_free_folio() mm: Add folio_put_refs() pagevec: Initialise folio_batch->percpu_pvec_drained
-
