Enable support for kptrs in percpu BPF arraymap by wiring up the freeing
of these kptrs from percpu map elements.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220904204145.3089-3-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

bpf_long_memcpy is used while copying to remote percpu regions from BPF
syscall and helpers, so that the copy is atomic at word size
granularity.

This might not be possible when you copy from map value hosting kptrs
from or to percpu maps, as the alignment or size in disjoint regions may
not be multiple of word size.

Hence, to avoid complicating the copy loop, we only use bpf_long_memcpy
when special fields are not present, otherwise use normal memcpy to copy
the disjoint regions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220904204145.3089-2-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Sparse reported a warning at bpf_map_free_kptrs()
"warning: Using plain integer as NULL pointer"
During the process of fixing this warning, it was discovered that the current
code erroneously writes to the pointer variable instead of deferencing and
writing to the actual kptr. Hence, Sparse tool accidentally helped to uncover
this problem. Fix this by doing WRITE_ONCE(*p, 0) instead of WRITE_ONCE(p, 0).

Note that the effect of this bug is that unreferenced kptrs will not be cleared
during check_and_free_fields. It is not a problem if the clearing is not done
during map_free stage, as there is nothing to free for them.

Fixes: 14a324f6 ("bpf: Wire up freeing of referenced kptr")
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/Yxi3pJaK6UDjVJSy@playgroundSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Benjamin Tissoires says:

====================

Hi,

well, given that the HID changes haven't moved a lot in the past
revisions and that I am cc-ing a bunch of people, I have dropped them
while we focus on the last 2 requirements in bpf-core changes.

I'll submit a HID targeted series when we get these in tree, which
would make things a lore more independent.

For reference, the whole reasons for these 2 main changes are at
https://lore.kernel.org/bpf/20220902132938.2409206-1-benjamin.tissoires@redhat.com/

Compared to v10 (in addition of dropping the HID changes), I have
changed the selftests so we can test both light skeletons and libbbpf
calls.

Cheers,
Benjamin
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We add 2 new kfuncs that are following the RET_PTR_TO_MEM
capability from the previous commit.
Then we test them in selftests:
the first tests are testing valid case, and are not failing,
and the later ones are actually preventing the program to be loaded
because they are wrong.

To work around that, we mark the failing ones as not autoloaded
(with SEC("?tc")), and we manually enable them one by one, ensuring
the verifier rejects them.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-8-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

For drivers (outside of network), the incoming data is not statically
defined in a struct. Most of the time the data buffer is kzalloc-ed
and thus we can not rely on eBPF and BTF to explore the data.

This commit allows to return an arbitrary memory, previously allocated by
the driver.
An interesting extra point is that the kfunc can mark the exported
memory region as read only or read/write.

So, when a kfunc is not returning a pointer to a struct but to a plain
type, we can consider it is a valid allocated memory assuming that:
- one of the arguments is either called rdonly_buf_size or
  rdwr_buf_size
- and this argument is a const from the caller point of view

We can then use this parameter as the size of the allocated memory.

The memory is either read-only or read-write based on the name
of the size parameter.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-7-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

net/bpf/test_run.c is already presenting 20 kfuncs.
net/netfilter/nf_conntrack_bpf.c is also presenting an extra 10 kfuncs.

Given that all the kfuncs are regrouped into one unique set, having
only 2 space left prevent us to add more selftests.

Bump it to 256.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-6-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We need to also export the kfunc set to the syscall program type,
and then add a couple of eBPF programs that are testing those calls.

The first one checks for valid access, and the second one is OK
from a static analysis point of view but fails at run time because
we are trying to access outside of the allocated memory.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-5-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When a function was trying to access data from context in a syscall eBPF
program, the verifier was rejecting the call unless it was accessing the
first element.
This is because the syscall context is not known at compile time, and
so we need to check this when actually accessing it.

Check for the valid memory access if there is no convert_ctx callback,
and allow such situation to happen.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-4-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

btf_check_subprog_arg_match() was used twice in verifier.c:
- when checking for the type mismatches between a (sub)prog declaration
  and BTF
- when checking the call of a subprog to see if the provided arguments
  are correct and valid

This is problematic when we check if the first argument of a program
(pointer to ctx) is correctly accessed:
To be able to ensure we access a valid memory in the ctx, the verifier
assumes the pointer to context is not null.
This has the side effect of marking the program accessing the entire
context, even if the context is never dereferenced.

For example, by checking the context access with the current code, the
following eBPF program would fail with -EINVAL if the ctx is set to null
from the userspace:

```
SEC("syscall")
int prog(struct my_ctx *args) {
  return 0;
}
```

In that particular case, we do not want to actually check that the memory
is correct while checking for the BTF validity, but we just want to
ensure that the (sub)prog definition matches the BTF we have.

So split btf_check_subprog_arg_match() in two so we can actually check
for the memory used when in a call, and ignore that part when not.

Note that a further patch is in preparation to disentangled
btf_check_func_arg_match() from these two purposes, and so right now we
just add a new hack around that by adding a boolean to this function.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-3-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Similar to tools/testing/selftests/bpf/prog_tests/dynptr.c:
we declare an array of tests that we run one by one in a for loop.

Followup patches will add more similar-ish tests, so avoid a lot of copy
paste by grouping the declaration in an array.

For light skeletons, we have to rely on the offsetof() macro so we can
statically declare which program we are using.
In the libbpf case, we can rely on bpf_object__find_program_by_name().
So also change the Makefile to generate both light skeletons and normal
ones.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-2-benjamin.tissoires@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Yonghong Song says:

====================
Currently struct arguments are not supported for trampoline based progs.
One of major reason is that struct argument may pass by value which may
use more than one registers. This breaks trampoline progs where
each argument is assumed to take one register. bcc community reported the
issue ([1]) where struct argument is not supported for fentry program.
  typedef struct {
        uid_t val;
  } kuid_t;
  typedef struct {
        gid_t val;
  } kgid_t;
  int security_path_chown(struct path *path, kuid_t uid, kgid_t gid);
Inside Meta, we also have a use case to attach to tcp_setsockopt()
  typedef struct {
        union {
                void            *kernel;
                void __user     *user;
        };
        bool            is_kernel : 1;
  } sockptr_t;
  int tcp_setsockopt(struct sock *sk, int level, int optname,
                     sockptr_t optval, unsigned int optlen);

This patch added struct value support for bpf tracing programs which
uses trampoline. Only <= 16 byte struct size is supported for now
which covers use cases in the above. For x86/arm64/bpf, <= 16
struct value will be passed in registers instead of by reference.
Only x86_64 is supported in this patch. arm64 support can be
added later.

 [1] https://github.com/iovisor/bcc/issues/3657

Changelog:
  v3 -> v4:
   - fix a test failure where no casting for
     bpf_get_func_arg() value as the value type is 'int'.
   - add tracing_struct test in DENYLIST.s390x
   - simplify macro BPF_REG_CNT for BPF_PROG2.
  v2 -> v3:
   - previously struct arguments (<= 16 bytes) are passed
     by reference for bpf programs. Suggested by Alexei,
     it is passed by value now.
   - in order to support passing <= 16 struct value, a
     new macro BPF_PROG2 is invented.
  rfc v1 -> v2:
   - changed bpf_func_model struct info fields to
     arg_flags[] to make it easy to iterate arguments
     in arch specific {save|restore}_regs() functions.
   - added fexit tests to test return values with
     struct arguments.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add tracing_struct test in DENYLIST.s390x since s390x does not
support trampoline now.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152723.2081551-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Use BPF_PROG2 instead of BPF_PROG for programs in progs/timer.c
to test BPF_PROG2 for cases without struct arguments.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152718.2081091-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add various struct argument tests with fentry/fexit programs.
Also add one test with a kernel func which does not have any
argument to test BPF_PROG2 macro in such situation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152713.2080039-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

To support struct arguments in trampoline based programs,
existing BPF_PROG doesn't work any more since
the type size is needed to find whether a parameter
takes one or two registers. So this patch added a new
BPF_PROG2 macro to support such trampoline programs.

The idea is suggested by Andrii. For example, if the
to-be-traced function has signature like
  typedef struct {
       void *x;
       int t;
  } sockptr;
  int blah(sockptr x, char y);

In the new BPF_PROG2 macro, the argument can be
represented as
  __bpf_prog_call(
     ({ union {
          struct { __u64 x, y; } ___z;
          sockptr x;
        } ___tmp = { .___z = { ctx[0], ctx[1] }};
        ___tmp.x;
     }),
     ({ union {
          struct { __u8 x; } ___z;
          char y;
        } ___tmp = { .___z = { ctx[2] }};
        ___tmp.y;
     }));
In the above, the values stored on the stack are properly
assigned to the actual argument type value by using 'union'
magic. Note that the macro also works even if no arguments
are with struct types.

Note that new BPF_PROG2 works for both llvm16 and pre-llvm16
compilers where llvm16 supports bpf target passing value
with struct up to 16 byte size and pre-llvm16 will pass
by reference by storing values on the stack. With static functions
with struct argument as always inline, the compiler is able
to optimize and remove additional stack saving of struct values.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152707.2079473-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

ARM64 does not support struct argument for trampoline based
bpf programs yet.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152702.2079066-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now instead of the number of arguments, the number of registers
holding argument values are stored in trampoline. Update
the description of bpf_get_func_arg[_cnt]() helpers. Previous
programs without struct arguments should continue to work
as usual.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152657.2078805-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In C, struct value can be passed as a function argument.
For small structs, struct value may be passed in
one or more registers. For trampoline based bpf programs,
this would cause complication since one-to-one mapping between
function argument and arch argument register is not valid
any more.

The latest llvm16 added bpf support to pass by values
for struct up to 16 bytes ([1]). This is also true for
x86_64 architecture where two registers will hold
the struct value if the struct size is >8 and <= 16.
This may not be true if one of struct member is 'double'
type but in current linux source code we don't have
such instance yet, so we assume all >8 && <= 16 struct
holds two general purpose argument registers.

Also change on-stack nr_args value to the number
of registers holding the arguments. This will
permit bpf_get_func_arg() helper to get all
argument values.

 [1] https://reviews.llvm.org/D132144Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152652.2078600-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Allow struct argument in trampoline based programs where
the struct size should be <= 16 bytes. In such cases, the argument
will be put into up to 2 registers for bpf, x86_64 and arm64
architectures.

To support arch-specific trampoline manipulation,
add arg_flags for additional struct information about arguments
in btf_func_model. Such information will be used in arch specific
function arch_prepare_bpf_trampoline() to prepare argument access
properly in trampoline.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152646.2078089-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

__ksize() was made private. Use ksize() instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-09-05

The following pull-request contains BPF updates for your *net-next* tree.

We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).

There are two small merge conflicts, resolve them as follows:

1) tools/testing/selftests/bpf/DENYLIST.s390x

  Commit 27e23836 ("selftests/bpf: Add lru_bug to s390x deny list") in
  bpf tree was needed to get BPF CI green on s390x, but it conflicted with
  newly added tests on bpf-next. Resolve by adding both hunks, result:

  [...]
  lru_bug                                  # prog 'printk': failed to auto-attach: -524
  setget_sockopt                           # attach unexpected error: -524                                               (trampoline)
  cb_refs                                  # expected error message unexpected error: -524                               (trampoline)
  cgroup_hierarchical_stats                # JIT does not support calling kernel function                                (kfunc)
  htab_update                              # failed to attach: ERROR: strerror_r(-524)=22                                (trampoline)
  [...]

2) net/core/filter.c

  Commit 1227c177 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
  from net tree conflicts with commit 29003875 ("bpf: Change bpf_setsockopt(SOL_SOCKET)
  to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
  bpf-next tree, result:

  [...]
	if (getopt) {
		if (optname == SO_BINDTODEVICE)
			return -EINVAL;
		return sk_getsockopt(sk, SOL_SOCKET, optname,
				     KERNEL_SOCKPTR(optval),
				     KERNEL_SOCKPTR(optlen));
	}

	return sk_setsockopt(sk, SOL_SOCKET, optname,
			     KERNEL_SOCKPTR(optval), *optlen);
  [...]

The main changes are:

1) Add any-context BPF specific memory allocator which is useful in particular for BPF
   tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.

2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
   to reuse the existing core socket code as much as possible, from Martin KaFai Lau.

3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
   with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.

4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.

5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
   integration with the rstat framework, from Yosry Ahmed.

6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.

7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.

8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
   backend, from James Hilliard.

9) Fix verifier helper permissions and reference state management for synchronous
   callbacks, from Kumar Kartikeya Dwivedi.

10) Add support for BPF selftest's xskxceiver to also be used against real devices that
    support MAC loopback, from Maciej Fijalkowski.

11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.

12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.

13) Various minor misc improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
  bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
  bpf: Remove usage of kmem_cache from bpf_mem_cache.
  bpf: Remove prealloc-only restriction for sleepable bpf programs.
  bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
  bpf: Remove tracing program restriction on map types
  bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
  bpf: Add percpu allocation support to bpf_mem_alloc.
  bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
  bpf: Adjust low/high watermarks in bpf_mem_cache
  bpf: Optimize call_rcu in non-preallocated hash map.
  bpf: Optimize element count in non-preallocated hash map.
  bpf: Relax the requirement to use preallocated hash maps in tracing progs.
  samples/bpf: Reduce syscall overhead in map_perf_test.
  selftests/bpf: Improve test coverage of test_maps
  bpf: Convert hash map to bpf_mem_alloc.
  bpf: Introduce any context BPF specific memory allocator.
  selftest/bpf: Add test for bpf_getsockopt()
  bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
  bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
  bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
  ...
====================

Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sparse checker found two endianness-related issues:

.../moxart_ether.c:34:15: warning: incorrect type in assignment (different base types)
.../moxart_ether.c:34:15:    expected unsigned int [usertype]
.../moxart_ether.c:34:15:    got restricted __le32 [usertype]

.../moxart_ether.c:39:16: warning: cast to restricted __le32

Fix them by using __le32 type instead of u32.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220902125037.1480268-1-saproj@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sparse found a number of endianness-related issues of these kinds:

.../ftmac100.c:192:32: warning: restricted __le32 degrades to integer

.../ftmac100.c:208:23: warning: incorrect type in assignment (different base types)
.../ftmac100.c:208:23:    expected unsigned int rxdes0
.../ftmac100.c:208:23:    got restricted __le32 [usertype]

.../ftmac100.c:249:23: warning: invalid assignment: &=
.../ftmac100.c:249:23:    left side has type unsigned int
.../ftmac100.c:249:23:    right side has type restricted __le32

.../ftmac100.c:527:16: warning: cast to restricted __le32

Change type of some fields from 'unsigned int' to '__le32' to fix it.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220902113749.1408562-1-saproj@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Extend lan966x with RGMII support. The MAC supports all RGMII_* modes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220902111548.614525-1-horatiu.vultur@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

We're not in a hot path and don't want to miss this message,
therefore remove the net_ratelimit() check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:

  memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)

Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220901071336.1418572-1-keescook@chromium.orgSigned-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
Introduce any context BPF specific memory allocator.

Tracing BPF programs can attach to kprobe and fentry. Hence they run in
unknown context where calling plain kmalloc() might not be safe. Front-end
kmalloc() with per-cpu cache of free elements. Refill this cache asynchronously
from irq_work.

Major achievements enabled by bpf_mem_alloc:
- Dynamically allocated hash maps used to be 10 times slower than fully
  preallocated. With bpf_mem_alloc and subsequent optimizations the speed
  of dynamic maps is equal to full prealloc.
- Tracing bpf programs can use dynamically allocated hash maps. Potentially
  saving lots of memory. Typical hash map is sparsely populated.
- Sleepable bpf programs can used dynamically allocated hash maps.

Future work:
- Expose bpf_mem_alloc as uapi FD to be used in dynptr_alloc, kptr_alloc
- Convert lru map to bpf_mem_alloc
- Further cleanup htab code. Example: htab_use_raw_lock can be removed.

Changelog:

v5->v6:
- Debugged the reason for selftests/bpf/test_maps ooming in a small VM that BPF CI is using.
  Added patch 16 that optimizes the usage of rcu_barrier-s between bpf_mem_alloc and
  hash map. It drastically improved the speed of htab destruction.

v4->v5:
- Fixed missing migrate_disable in hash tab free path (Daniel)
- Replaced impossible "memory leak" with WARN_ON_ONCE (Martin)
- Dropped sysctl kernel.bpf_force_dyn_alloc patch (Daniel)
- Added Andrii's ack
- Added new patch 15 that removes kmem_cache usage from bpf_mem_alloc.
  It saves memory, speeds up map create/destroy operations
  while maintains hash map update/delete performance.

v3->v4:
- fix build issue due to missing local.h on 32-bit arch
- add Kumar's ack
- proposal for next steps from Delyan:
https://lore.kernel.org/bpf/d3f76b27f4e55ec9e400ae8dcaecbb702a4932e8.camel@fb.com/

v2->v3:
- Rewrote the free_list algorithm based on discussions with Kumar. Patch 1.
- Allowed sleepable bpf progs use dynamically allocated maps. Patches 13 and 14.
- Added sysctl to force bpf_mem_alloc in hash map even if pre-alloc is
  requested to reduce memory consumption. Patch 15.
- Fix: zero-fill percpu allocation
- Single rcu_barrier at the end instead of each cpu during bpf_mem_alloc destruction

v2 thread:
https://lore.kernel.org/bpf/20220817210419.95560-1-alexei.starovoitov@gmail.com/

v1->v2:
- Moved unsafe direct call_rcu() from hash map into safe place inside bpf_mem_alloc. Patches 7 and 9.
- Optimized atomic_inc/dec in hash map with percpu_counter. Patch 6.
- Tuned watermarks per allocation size. Patch 8
- Adopted this approach to per-cpu allocation. Patch 10.
- Fully converted hash map to bpf_mem_alloc. Patch 11.
- Removed tracing prog restriction on map types. Combination of all patches and final patch 12.

v1 thread:
https://lore.kernel.org/bpf/20220623003230.37497-1-alexei.starovoitov@gmail.com/

LWN article:
https://lwn.net/Articles/899274/
====================

Link: https://lore.kernel.org/r/Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

User space might be creating and destroying a lot of hash maps. Synchronous
rcu_barrier-s in a destruction path of hash map delay freeing of hash buckets
and other map memory and may cause artificial OOM situation under stress.
Optimize rcu_barrier usage between bpf hash map and bpf_mem_alloc:
- remove rcu_barrier from hash map, since htab doesn't use call_rcu
  directly and there are no callback to wait for.
- bpf_mem_alloc has call_rcu_in_progress flag that indicates pending callbacks.
  Use it to avoid barriers in fast path.
- When barriers are needed copy bpf_mem_alloc into temp structure
  and wait for rcu barrier-s in the worker to let the rest of
  hash map freeing to proceed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-17-alexei.starovoitov@gmail.com

For bpf_mem_cache based hash maps the following stress test:
for (i = 1; i <= 512; i <<= 1)
  for (j = 1; j <= 1 << 18; j <<= 1)
    fd = bpf_map_create(BPF_MAP_TYPE_HASH, NULL, i, j, 2, 0);
creates many kmem_cache-s that are not mergeable in debug kernels
and consume unnecessary amount of memory.
Turned out bpf_mem_cache's free_list logic does batching well,
so usage of kmem_cache for fixes size allocations doesn't bring
any performance benefits vs normal kmalloc.
Hence get rid of kmem_cache in bpf_mem_cache.
That saves memory, speeds up map create/destroy operations,
while maintains hash map update/delete performance.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-16-alexei.starovoitov@gmail.com

Since hash map is now converted to bpf_mem_alloc and it's waiting for rcu and
rcu_tasks_trace GPs before freeing elements into global memory slabs it's safe
to use dynamically allocated hash maps in sleepable bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-15-alexei.starovoitov@gmail.com

Use call_rcu_tasks_trace() to wait for sleepable progs to finish.
Then use call_rcu() to wait for normal progs to finish
and finally do free_one() on each element when freeing objects
into global memory pool.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-14-alexei.starovoitov@gmail.com

The hash map is now fully converted to bpf_mem_alloc. Its implementation is not
allocating synchronously and not calling call_rcu() directly. It's now safe to
use non-preallocated hash maps in all types of tracing programs including
BPF_PROG_TYPE_PERF_EVENT that runs out of NMI context.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-13-alexei.starovoitov@gmail.com

Convert dynamic allocations in percpu hash map from alloc_percpu() to
bpf_mem_cache_alloc() from per-cpu bpf_mem_alloc. Since bpf_mem_alloc frees
objects after RCU gp the call_rcu() is removed. pcpu_init_value() now needs to
zero-fill per-cpu allocations, since dynamically allocated map elements are now
similar to full prealloc, since alloc_percpu() is not called inline and the
elements are reused in the freelist.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-12-alexei.starovoitov@gmail.com

Extend bpf_mem_alloc to cache free list of fixed size per-cpu allocations.
Once such cache is created bpf_mem_cache_alloc() will return per-cpu objects.
bpf_mem_cache_free() will free them back into global per-cpu pool after
observing RCU grace period.
per-cpu flavor of bpf_mem_alloc is going to be used by per-cpu hash maps.

The free list cache consists of tuples { llist_node, per-cpu pointer }
Unlike alloc_percpu() that returns per-cpu pointer
the bpf_mem_cache_alloc() returns a pointer to per-cpu pointer and
bpf_mem_cache_free() expects to receive it back.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-11-alexei.starovoitov@gmail.com

SLAB_TYPESAFE_BY_RCU makes kmem_caches non mergeable and slows down
kmem_cache_destroy. All bpf_mem_cache are safe to share across different maps
and programs. Convert SLAB_TYPESAFE_BY_RCU to batched call_rcu. This change
solves the memory consumption issue, avoids kmem_cache_destroy latency and
keeps bpf hash map performance the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-10-alexei.starovoitov@gmail.com

The same low/high watermarks for every bucket in bpf_mem_cache consume
significant amount of memory. Preallocating 64 elements of 4096 bytes each in
the free list is not efficient. Make low/high watermarks and batching value
dependent on element size. This change brings significant memory savings.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-9-alexei.starovoitov@gmail.com

Doing call_rcu() million times a second becomes a bottle neck.
Convert non-preallocated hash map from call_rcu to SLAB_TYPESAFE_BY_RCU.
The rcu critical section is no longer observed for one htab element
which makes non-preallocated hash map behave just like preallocated hash map.
The map elements are released back to kernel memory after observing
rcu critical section.
This improves 'map_perf_test 4' performance from 100k events per second
to 250k events per second.

bpf_mem_alloc + percpu_counter + typesafe_by_rcu provide 10x performance
boost to non-preallocated hash map and make it within few % of preallocated map
while consuming fraction of memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-8-alexei.starovoitov@gmail.com

The atomic_inc/dec might cause extreme cache line bouncing when multiple cpus
access the same bpf map. Based on specified max_entries for the hash map
calculate when percpu_counter becomes faster than atomic_t and use it for such
maps. For example samples/bpf/map_perf_test is using hash map with max_entries
1000. On a system with 16 cpus the 'map_perf_test 4' shows 14k events per
second using atomic_t. On a system with 15 cpus it shows 100k events per second
using percpu. map_perf_test is an extreme case where all cpus colliding on
atomic_t which causes extreme cache bouncing. Note that the slow path of
percpu_counter is 5k events per secound vs 14k for atomic, so the heuristic is
necessary. See comment in the code why the heuristic is based on
num_online_cpus().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-7-alexei.starovoitov@gmail.com

Since bpf hash map was converted to use bpf_mem_alloc it is safe to use
from tracing programs and in RT kernels.
But per-cpu hash map is still using dynamic allocation for per-cpu map
values, hence keep the warning for this map type.
In the future alloc_percpu_gfp can be front-end-ed with bpf_mem_cache
and this restriction will be completely lifted.
perf_event (NMI) bpf programs have to use preallocated hash maps,
because free_htab_elem() is using call_rcu which might crash if re-entered.

Sleepable bpf programs have to use preallocated hash maps, because
life time of the map elements is not protected by rcu_read_lock/unlock.
This restriction can be lifted in the future as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-6-alexei.starovoitov@gmail.com