- 16 May, 2019 29 commits
-
-
Jason Wang authored
[ Upstream commit a35d310f ] We need check if tun->numqueues is zero (e.g for the persist device) before trying to use it for modular arithmetic. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: 96f84061("tun: add eBPF based queue selection method") Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stephen Suryaputra authored
[ Upstream commit ff6ab32b ] VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 873017af ] With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: a6111d3c ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit ff946833 ] commit 517d7c79 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79 ("tipc: fix hanging poll() for stream sockets") Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.se> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit c7e0d6cc ] calling connect(AF_UNSPEC) on an already connected TCP socket is an established way to disconnect() such socket. After commit 68741a8a ("selinux: Fix ltp test connect-syscall failure") it no longer works and, in the above scenario connect() fails with EAFNOSUPPORT. Fix the above falling back to the generic/old code when the address family is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has specific constraints. Fixes: 68741a8a ("selinux: Fix ltp test connect-syscall failure") Reported-by:
Tom Deseyn <tdeseyn@redhat.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 36096f2f ] kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit ee0df193 ] When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only. [ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100 [ 69.890172] Faulting instruction address: 0xc033e164 [ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1] [ 69.900494] BE PREEMPT CMPCPRO [ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269 [ 69.915956] task: c0684310 task.stack: c06da000 [ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc [ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty) [ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000 [ 69.940869] DAR: f0000100 DSISR: 20000000 [ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f [ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0 [ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001 [ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044 [ 69.978348] NIP [c033e164] skb_put+0x0/0x5c [ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8 [ 69.987384] Call Trace: [ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable) [ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c [ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310 [ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4 [ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c [ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4 [ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14 [ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90 [ 70.027964] LR = rcu_idle_exit+0x74/0x90 [ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable) [ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c [ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c [ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384 [ 70.059153] [c06dbff0] [00003438] 0x3438 [ 70.063062] Instruction dump: [ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910 [ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910 [ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]--- This patch forbids the modification of the number of buffers in the ring while the interface is running. Fixes: ac421852 ("ucc_geth: add ethtool support") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 5afcd14c ] The old MIPS implementation of dma_cache_sync() didn't use the dev argument, but commit c9eb6172 ("dma-mapping: turn dma_cache_sync into a dma_map_ops method") changed that, so we now need to set dev.parent. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Harini Katakam authored
[ Upstream commit 05044531 ] Current order in open: -> Enable interrupts (macb_init_hw) -> Enable NAPI -> Start PHY Sequence of RX handling: -> RX interrupt occurs -> Interrupt is cleared and interrupt bits disabled in handler -> NAPI is scheduled -> In NAPI, RX budget is processed and RX interrupts are re-enabled With the above, on QEMU or fixed link setups (where PHY state doesn't matter), there's a chance macb RX interrupt occurs before NAPI is enabled. This will result in NAPI being scheduled before it is enabled. Fix this macb open by changing the order. Fixes: ae1f2a56 ("net: macb: Added support for many RX queues") Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Corentin Labbe authored
[ Upstream commit d4c26eb6 ] When adding more MAC addresses to a dwmac-sun8i interface, the device goes directly in promiscuous mode. This is due to IFF_UNICAST_FLT missing flag. So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT. Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 68be9302 ] BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f ("net: dsa: Add support for learning FDB through notification") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Ahern authored
[ Upstream commit 19e4e768 ] inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic. As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO. IPv6 works fine. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit e9919a24 ] With commit 153380ec ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like [localhost ~ ]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default 100000: from 192.168.7.5 lookup 5 100000: from 192.168.7.5 lookup 5 As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists. Fixes: 153380ec ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") Reported-by:
Thomas Haller <thaller@redhat.com> Signed-off-by:
-
Laurentiu Tudor authored
[ Upstream commit 17170e65 ] Fix issue with the entry indexing in the sg frame cleanup code being off-by-1. This problem showed up when doing some basic iperf tests and manifested in traffic coming to a halt. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Tobin C. Harding authored
[ Upstream commit bdfad5ae ] Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump). Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree(). Signed-off-by:
Tobin C. Harding <tobin@kernel.org> Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit a9b8a2b3 ] There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so: modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down echo "ens4f0" > /sys/class/net/bond0/bonding/slaves echo "ens4f1" > /sys/class/net/bond0/bonding/slaves ip link set bond0 up ip addr add 192.168.1.2/24 dev bond0 Pings to 192.168.1.1 work just fine. Now turn on arp_validate: echo 1 > /sys/class/net/bond0/bonding/arp_validate Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face: echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg ... [133191.911987] bond0: Setting arp_validate to none (0) [133194.257793] bond0: bond_should_notify_peers: slave ens4f0 [133194.258031] bond0: link status definitely down for interface ens4f0, disabling it [133194.259000] bond0: making interface ens4f1 the new active one [133197.330130] bond0: link status definitely down for interface ens4f1, disabling it [133197.331191] bond0: now running without any active interface! The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df9, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well. One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here. Fixes: 3fe68df9 ("bonding: always set recv_probe to bond_arp_rcv in arp monitor") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Nigel Croxon authored
commit 4f4fd7c5 upstream. Changing state from check_state_check_result to check_state_compute_result not only is unsafe but also doesn't appear to serve a valid purpose. A raid6 check should only be pushing out extra writes if doing repair and a mis-match occurs. The stripe dev management will already try and do repair writes for failing sectors. This patch makes the raid6 check_state_check_result handling work more like raid5's. If somehow too many failures for a check, just quit the check operation for the stripe. When any checks pass, don't try and use check_state_compute_result for a purpose it isn't needed for and is unsafe for. Just mark the stripe as in sync for passing its parity checks and let the stripe dev read/write code and the bad blocks list do their job handling I/O errors. Repro steps from Xiao: These are the steps to reproduce this problem: 1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c 2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1 3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6 sde is the disk created by scsi_debug 4. echo "2" >/sys/module/scsi_debug/parameters/opts 5. raid-check It panic: [ 4854.730899] md: data-check of RAID array md127 [ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current] [ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error [ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00 [ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0 [ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current] [ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error [ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00 [ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000 [ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current] [ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error [ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00 [ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000 [ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current] [ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error [ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00 [ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0 [ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1). [ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1). [ 4854.906201] ------------[ cut here ]------------ [ 4854.907341] kernel BUG at drivers/md/raid5.c:4190! raid5.c:4190 above is this BUG_ON: handle_parity_checks6() ... BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */ Cc: <stable@vger.kernel.org> # v3.16+ OriginalAuthor: David Jeffery <djeffery@redhat.com> Cc: Xiao Ni <xni@redhat.com> Tested-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Nigel Croxon <ncroxon@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 84242b82 upstream. Add missing break statement in order to prevent the code from falling through to case 0x1025, and erroneously setting rtlhal->oem_id to RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and none of the cases in switch (rtlefuse->eeprom_smid) match. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 238ad2dd ("rtlwifi: rtl8723ae: Clean up the hardware info routine") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Petr Štetiar authored
commit 6b583201 upstream. It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48. The reboot loop is caused by the following excessive number of WARN_ON messages: WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211] as the messages are being correctly emitted by the following guard: case RX_ENC_LEGACY: if (WARN_ON(status->rate_idx >= sband->n_bitrates)) as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2218 Fixes: 85478344 ("mwl8k: properly set receive status rate index on 5 GHz receive") Cc: <stable@vger.kernel.org> Tested-by:
Eubert Bao <bunnier@gmail.com> Reported-by:
Petr Štetiar <ynezz@true.cz> Signed-off-by:
-
Johan Hovold authored
commit 3f5edd58 upstream. Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Fixes: d83b4053 ("USB: serial: add support for multiple read urbs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit cf4f2ad6 upstream. Userspace can make host function calls, called hgcm-calls through the /dev/vboxguest device. In this case we should not accept all hgcm-function-parameter-types, some are only valid for in kernel calls. This commit adds proper hgcm-function-parameter-type validation to the ioctl for doing a hgcm-call from userspace. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Andrea Parri authored
commit 99826790 upstream. smp_mb__before_atomic() can not be applied to atomic_set(). Remove the barrier and rely on RELEASE synchronization. Fixes: ba16b284 ("kernfs: add an API to get kernfs node from inode number") Cc: stable@vger.kernel.org Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wolfram Sang authored
commit 4db61c2a upstream. There are two problems with WARN_ON() here. One: It is not ratelimited. Two: We don't see which adapter was used when trying to transfer something when already suspended. Implement a custom ratelimit once per adapter and use dev_WARN there. This fixes both issues. Drawback is that we don't see if multiple drivers are trying to transfer with the same adapter while suspended. They need to be discovered one after the other now. This is better than a high CPU load because a really broken driver might try to resend endlessly. Fixes: 9ac6cb5f ("i2c: add suspended flag and accessors for i2c adapters") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org # v5.1+ Signed-off-by:
-
Kees Cook authored
commit 9dd3fcb0 upstream. When running without USERNS or PIDNS the seccomp test would hang since it was waiting forever for the child to trigger the user notification since it seems the glibc() abort handler makes a call to getpid(), which would trap again. This changes the getpid filter to getppid, and makes sure ASSERTs execute to stop from spawning the listener. Reported-by:
Shuah Khan <shuah@kernel.org> Fixes: 6a21cc50 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org # > 5.0 Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Tycho Andersen <tycho@tycho.ws> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Lei YU authored
commit b88c5049 upstream. The occ's extended status is checked and shown as sysfs attributes. But the code was incorrectly checking the "status" bits. Fix it by checking the "ext_status" bits. Cc: stable@vger.kernel.org Fixes: df04ced6 ("hwmon (occ): Add sysfs attributes for additional OCC data") Signed-off-by:
Lei YU <mine260309@gmail.com> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Stefan Wahren authored
commit 53f1647d upstream. In case pwm_fan_of_get_cooling_data() fails we should disable the PWM just like in the other error cases. Fixes: 2e5219c7 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree") Cc: <stable@vger.kernel.org> # 4.14+ Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Mario Limonciello authored
commit 6cc13c28 upstream. When converting the driver two arguments were transposed leading to rfkill not working. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201427Reported-by:
Pepijn de Vos <pepijndevos@gmail.com> Fixes: 549b49 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls") Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Acked-by:
Pali Rohár <pali.rohar@gmail.com> Cc: <stable@vger.kernel.org> # 4.14.x Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by:
-
Jiaxun Yang authored
commit f7db839f upstream. Some AMD based ThinkPads have a firmware bug that calling "GBDC" will cause Bluetooth on Intel wireless cards blocked. Probe these models by DMI match and disable Bluetooth subdriver if specified Intel wireless card exist. Cc: stable <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 1cbd7a64 upstream. It seems that the default case should return AE_CTRL_TERMINATE, instead of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK; otherwise the line of code at the end of the function is unreachable and makes no sense: return AE_CTRL_TERMINATE; This fix is based on the following thread of discussion: https://lore.kernel.org/patchwork/patch/959782/ Fixes: 33a04454 ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)") Cc: stable@vger.kernel.org Signed-off-by:
-
- 14 May, 2019 11 commits
-
-
Greg Kroah-Hartman authored
-
Josh Poimboeuf authored
commit 95310e34 upstream Fix a minor typo in the MDS documentation: "eanbled" -> "enabled". Reported-by:
Jeff Bastian <jbastian@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Tyler Hicks authored
commit ea01668f upstream Adjust the last two rows in the table that display possible values when MDS mitigation is enabled. They both were slightly innacurate. In addition, convert the table of possible values and their descriptions to a list-table. The simple table format uses the top border of equals signs to determine cell width which resulted in the first column being far too wide in comparison to the second column that contained the majority of the text. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
speck for Pawan Gupta authored
commit e672f8bf upstream Updated the documentation for a new CVE-2019-11091 Microarchitectural Data Sampling Uncacheable Memory (MDSUM) which is a variant of Microarchitectural Data Sampling (MDS). MDS is a family of side channel attacks on internal buffers in Intel CPUs. MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from memory that takes a fault or assist can leave data in a microarchitectural structure that may later be observed using one of the same methods used by MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM. The existing mitigation for MDS applies to MDSUM as well. Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Jon Masters <jcm@redhat.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 5c14068f upstream Add MDS to the new 'mitigations=' cmdline option. Signed-off-by:
-
Josh Poimboeuf authored
commit 0336e04a upstream Configure s390 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Spectre v1 and Spectre v2. The default behavior is unchanged. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/e4a161805458a5ec88812aac0307ae3908a030fc.1555085500.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
commit 782e69ef upstream Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by:
-
Josh Poimboeuf authored
commit d68be4c4 upstream Configure x86 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v2, Speculative Store Bypass, and L1TF. The default behavior is unchanged. Signed-off-by:
-
Josh Poimboeuf authored
commit 98af8452 upstream Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit e2c3c947 upstream This code is only for CPUs which are affected by MSBDS, but are *not* affected by the other two MDS issues. For such CPUs, enabling the mds_idle_clear mitigation is enough to mitigate SMT. However if user boots with 'mds=off' and still has SMT enabled, we should not report that SMT is mitigated: $cat /sys//devices/system/cpu/vulnerabilities/mds Vulnerable; SMT mitigated But rather: Vulnerable; SMT vulnerable Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Boris Ostrovsky authored
commit cae5ec34 upstream s/L1TF/MDS/ Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
