- 05 Dec, 2009 40 commits
-
-
Stefan Richter authored
Add #include <dvb_demux.h> for dvb_dmx_swfilter_packets(). This was already indirectly included via firedtv.h, but don't rely on it. The 4 bytes which were referred to as FIREWIRE_HEADER_SIZE are actually the source packet header from IEC 61883-4 (MPEG2-TS data transmission over 1394), not e.g. the IEEE 1394 isochronous packet header. So choose a more precise name. Also, express the payload size as a preprocessor constant too. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Stefan Richter authored
Preparation for the port of firedtv to the firewire-core kernel API: The fdtv->backend->lock() hook and thus the CMP code is slightly changed to better fit with the new API. Signed-off-by:
-
Stefan Richter authored
Preparation for the port of firedtv to the firewire-core kernel API: Canceling of the remote control workqueue job is factored into firedtv-rc.c. Plus trivial whitespace change. Signed-off-by:
-
Julia Lawall authored
This initialization of the value of audio_mode is the one used if nothing matches in the subsequent switch. The variable audio_mode is subsequently assigned to constants such as TUNER_AUDIO_MONO and TUNER_AUDIO_STEREO. TUNER_AUDIO_STEREO has the same value as V4L2_TUNER_MODE_STEREO, so it would seem better to use that value here. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
hiranotaka@zng.jp authored
Signed-off-by:
HIRANO Takahito <hiranotaka@zng.info> Signed-off-by:
-
Marton Nemeth authored
Signed-off-by:
Marton Nemeth <nm127@freemail.hu> Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Marton Nemeth authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Márton Németh authored
The valid values for these controls are 0..3 (lower two bits) which was identified by trial and error on Labtec Webcam 2200 (USB ID 093a:2626). The upper 6 bits are ignored on page 0, registers 0xc5 and 0xc7 by the camera. Signed-off-by: Márton NÃ
© meth <nm127@freemail.hu> Signed-off-by: -
Jean-Francois Moine authored
- the i2c base address is now taken from the sn9c1xx register table Signed-off-by:
-
Márton Németh authored
The usb_control_msg() can fail any time. Only continue writing sequence if there was no error with the previous write. If there was any problem stop sending URBs and propagate the error to the gspca_main. Signed-off-by: Márton NÃ
© meth <nm127@freemail.hu> Signed-off-by: -
Márton Németh authored
The stream off command is sent to the device twice, one is enough. Signed-off-by: Márton NÃ
© meth <nm127@freemail.hu> Signed-off-by: -
Roel Kluin authored
Make id signed so we can't get an invalid pointer when we pass a negative id. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexander Strakh authored
In driver ./drivers/media/video/usbvideo/quickcam_messenger.c in line 91: 91 usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); After this line we use strncat: 92 strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); where sizeof(cam->input_physname) returns length of cam->input_phisname without length for null-symbol. But this parameter must be - "maximum numbers of bytes to copy", i.e.: sizeof(cam->input_physname)-strlen(cam->input_physname)-1. In this case, after call to usb_make_path the similar drivers use strlcat. Like in: drivers/hid/usbhid/hid-core.c: 1152 usb_make_path(dev, hid->phys, sizeof(hid->phys)); 1153 strlcat(hid->phys, "/input", sizeof(hid->phys)); Found by Linux Driver Verification Project. Use strlcat instead of strncat. Signed-off-by:
Alexander Strakh <strakh@ispras.ru> Signed-off-by:
-
Alexander Strakh authored
In driver ./drivers/media/video/usbvideo/konicawc.c in line 227: 227 usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); After this line we use strncat: 228 strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); where sizeof(cam->input_physname) returns length of cam->input_phisname without length for null-symbol. But this parameter must be - "maximum numbers of bytes to copy", i.e.: sizeof(cam->input_physname)-strlen(cam->input_physname)-1. In this case, after call to usb_make_path the similar drivers use strlcat. Like in drivers/hid/usbhid/hid-core.c: 1152 usb_make_path(dev, hid->phys, sizeof(hid->phys)); 1153 strlcat(hid->phys, "/input", sizeof(hid->phys)); Found by Linux Driver Verification Project. Use strlcat instead of strncat. Signed-off-by:
-
Jonathan Corbet authored
The videobuf_queue_ops function vector is not declared constant, but there's no need for the videobuf layer to ever change it. Make it const so that videobuf users can make their operations const without warnings. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
David Wong authored
X-Patchwork-Id: 55873 Add support for cxusb card Mygica D689 DBM-TH USB Signed-off-by:
David T. L. Wong <davidtlwong@gmail.com> Signed-off-by:
-
David T. L. Wong authored
Adds support for cx23885 card Mygica X8558 Pro DMB-TH Signed-off-by:
-
David T.L. Wong authored
Adds support for Maxim MAX2165 silicon tuner. It was tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885. Signed-off-by:
-
David T.L. Wong authored
Adds support for Maxim MAX2165 silicon tuner. It is tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885 Signed-off-by:
-
Ignacio de Miguel Diaz authored
Add USB ID 1b80:e39d for Sveon STV20 Tuner USB DVB-T HDTV. Signed-off-by:
Ignacio de Miguel Diaz <imigueldiaz@gmail.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
E3C EC168 DVB USB driver Signed-off-by:
-
Antti Palosaari authored
E3C EC100 DVB-T demodulator driver Signed-off-by:
-
Manu Abraham authored
With a lower bandwidth setup, the Transport Stream gets corrupted due to TSFIFO overrun. The patch fixes the issue. The issue is seen with Transport Streams having a Symbol Rate of 22MSPS and/or greater. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Andreas Regel authored
It had always the value 3 no matter what frequency was given. Signed-off-by:
Andreas Regel <andreas.regel@gmx.de> Signed-off-by:
-
Andreas Regel authored
While here, also do some blind scan related fixes. Signed-off-by:
-
Andreas Regel authored
V4L/DVB (13358): stv090x: add an additional check for packet delineator lock in stv090x_read_status in case of a tuned DVB-S2 signal Signed-off-by:
-
Andreas Regel authored
Signed-off-by:
-
Andreas Regel authored
This patch contains several fixes for the stv090x driver: - added missing else - use calculated timeout instead of fixed one - use correct frequency when doing zigzag scan - added missing read of GENCFG register Signed-off-by:
-
Andreas Regel authored
V4L/DVB (13355): stv090x: fixes calculation of AGC2 and uses a different AGC2 threshold for cut 3 chips Signed-off-by:
-
Andreas Regel authored
Signed-off-by:
-
Andreas Regel authored
V4L/DVB (13353): stv090x: fixes STR and SNR calculation and normalizes the value into the 0..0xFFFF range Signed-off-by:
-
Andreas Regel authored
Signed-off-by:
-
Andreas Regel authored
Signed-off-by:
-
Michael Krufky authored
The IR on the HVR-1290 is identical to that of the HVR-1850 Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Igor M. Liplianin authored
Patch 4 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by:
Igor M. Liplianin <liplianin@netup.ru> Signed-off-by:
-
Igor M. Liplianin authored
Patch 3 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by:
-
