- 12 Jul, 2017 1 commit
-
-
Christoph Hellwig authored
commit 80f18379 upstream. Add a central define for all valid open flags, and use it in the uniqueness check. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 Jul, 2017 39 commits
-
-
Greg Kroah-Hartman authored
-
Wanpeng Li authored
commit d4912215 upstream. WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G OE 4.12.0-rc3+ #23 RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] Call Trace: ? kvm_check_async_pf_completion+0xef/0x120 [kvm] ? rcu_read_lock_sched_held+0x79/0x80 vmx_queue_exception+0x104/0x160 [kvm_intel] ? vmx_queue_exception+0x104/0x160 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm] ? kvm_arch_vcpu_load+0x47/0x240 [kvm] ? kvm_arch_vcpu_load+0x62/0x240 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This is triggered occasionally by running both win7 and win2016 in L2, in addition, EPT is disabled on both L1 and L2. It can't be reproduced easily. Commit 0b6ac343 (KVM: nVMX: Correct handling of exception injection) mentioned that "KVM wants to inject page-faults which it got to the guest. This function assumes it is called with the exit reason in vmcs02 being a #PF exception". Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to L2) allows to check all exceptions for intercept during delivery to L2. However, there is no guarantee the exit reason is exception currently, when there is an external interrupt occurred on host, maybe a time interrupt for host which should not be injected to guest, and somewhere queues an exception, then the function nested_vmx_check_exception() will be called and the vmexit emulation codes will try to emulate the "Acknowledge interrupt on exit" behavior, the warning is triggered. Reusing the exit reason from the L2->L0 vmexit is wrong in this case, the reason must always be EXCEPTION_NMI when injecting an exception into L1 as a nested vmexit. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Fixes: e011c663 ("KVM: nVMX: Check all exceptions for intercept during delivery to L2") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krčmář authored
commit f0367ee1 upstream. Static checker noticed that base3 could be used uninitialized if the segment was not present (useable). Random stack values probably would not pass VMCS entry checks. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1aa36616 ("KVM: x86 emulator: consolidate segment accessors") Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Radim Krčmář authored
commit 34b0dadb upstream. Static analysis noticed that pmu->nr_arch_gp_counters can be 32 (INTEL_PMC_MAX_GENERIC) and therefore cannot be used to shift 'int'. I didn't add BUILD_BUG_ON for it as we have a better checker. Reported-by:
-
Ladi Prosek authored
commit 6ed071f0 upstream. On AMD, the effect of set_nmi_mask called by emulate_iret_real and em_rsm on hflags is reverted later on in x86_emulate_instruction where hflags are overwritten with ctxt->emul_flags (the kvm_set_hflags call). This manifests as a hang when rebooting Windows VMs with QEMU, OVMF, and >1 vcpu. Instead of trying to merge ctxt->emul_flags into vcpu->arch.hflags after an instruction is emulated, this commit deletes emul_flags altogether and makes the emulator access vcpu->arch.hflags using two new accessors. This way all changes, on the emulator side as well as in functions called from the emulator and accessing vcpu state with emul_to_vcpu, are preserved. More details on the bug and its manifestation with Windows and OVMF: It's a KVM bug in the interaction between SMI/SMM and NMI, specific to AMD. I believe that the SMM part explains why we started seeing this only with OVMF. KVM masks and unmasks NMI when entering and leaving SMM. When KVM emulates the RSM instruction in em_rsm, the set_nmi_mask call doesn't stick because later on in x86_emulate_instruction we overwrite arch.hflags with ctxt->emul_flags, effectively reverting the effect of the set_nmi_mask call. The AMD-specific hflag of interest here is HF_NMI_MASK. When rebooting the system, Windows sends an NMI IPI to all but the current cpu to shut them down. Only after all of them are parked in HLT will the initiating cpu finish the restart. If NMI is masked, other cpus never get the memo and the initiating cpu spins forever, waiting for hal!HalpInterruptProcessorsStarted to drop. That's the symptom we observe. Fixes: a584539b ("KVM: x86: pass the whole hflags field to emulator and back") Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
-
Mark Salter authored
commit 335d2c2d upstream. Commit 5c492c3f ("arm64: smp: Add function to determine if cpus are stuck in the kernel") added a helper function to determine if die() is supported in cpu_ops. This function assumes a cpu will have a valid cpu_ops entry, but that may not be the case for cpu0 is spin-table or parking protocol is used to boot secondary cpus. In that case, there is a NULL dereference if have_cpu_die() is called by cpu0. So add a check for a valid cpu_ops before dereferencing it. Fixes: 5c492c3f ("arm64: smp: Add function to determine if cpus are stuck in the kernel") Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Kamal Dasu authored
commit 9d2ee0a6 upstream. On brcmnand controller v6.x and v7.x, the #WP pin is controlled through the NAND_WP bit in CS_SELECT register. The driver currently assumes that toggling the #WP pin is instantaneously enabling/disabling write-protection, but it actually takes some time to propagate the new state to the internal NAND chip logic. This behavior is sometime causing data corruptions when an erase/program operation is executed before write-protection has really been disabled. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Jaedon Shin authored
commit 2de3ec4f upstream. The BSC data buffers to send and receive data are each of size 32 bytes or 8 bytes 'xfersz' depending on SoC. The problem observed for all the combined message transfer was if length of data transfer was a multiple of 'xfersz' a repeated START was being transmitted by BSC driver. Fixed this by appropriately setting START/STOP conditions for such transfers. Fixes: dd1aa252 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Rafał Miłecki authored
commit 77c0d0cd upstream. Our code was assigning number of channels to the index variable by default. If firmware reported channel we didn't predict this would result in using that initial index value and writing out of array. This never happened so far (we got a complete list of supported channels) but it means possible memory corruption so we should handle it anyway. This patch simply detects unexpected channel and ignores it. As we don't try to create new entry now, it's also safe to drop hw_value and center_freq assignment. For known channels we have these set anyway. I decided to fix this issue by assigning NULL or a target channel to the channel variable. This was one of possible ways, I prefefred this one as it also avoids using channel[index] over and over. Fixes: 58de92d2 ("brcmfmac: use static superset of channels for wiphy bands") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 5b0ff9a0 upstream. hns_roce_v1_cq_set_ci() calls roce_set_bit() on an uninitialized field, which will then change only a few of its bits, causing a warning with the latest gcc: infiniband/hw/hns/hns_roce_hw_v1.c: In function 'hns_roce_v1_cq_set_ci': infiniband/hw/hns/hns_roce_hw_v1.c:1854:23: error: 'doorbell[1]' is used uninitialized in this function [-Werror=uninitialized] roce_set_bit(doorbell[1], ROCEE_DB_OTHERS_H_ROCEE_DB_OTH_HW_SYNS_S, 1); The code is actually correct since we always set all bits of the port_vlan field, but gcc correctly points out that the first access does contain uninitialized data. This initializes the field to zero first before setting the individual bits. Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 5c51f4ae upstream. Arnd Bergmann reported a (false positive) objtool warning: drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer The issue is in find_switch_table(). It tries to find a switch statement's jump table by walking backwards from an indirect jump instruction, looking for a relocation to the .rodata section. In this case it stopped walking prematurely: the first .rodata relocation it encountered was for a variable (resp_state_name) instead of a jump table, so it just assumed there wasn't a jump table. The fix is to ignore any .rodata relocation which refers to an ELF object symbol. This works because the jump tables are anonymous and have no symbols associated with them. Reported-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3732710f ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@trebleSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sudeep Holla authored
commit 67bcc2c5 upstream. Currently we add the virtual cpufreq device unconditionally even when the SCPI DVFS clock provider node is disabled. This will cause cpufreq driver to throw errors when it gets initailised on boot/modprobe and also when the CPUs are hot-plugged back in. This patch fixes the issue by adding the virtual cpufreq device only if the SCPI DVFS clock provider is available and registered. Fixes: 9490f01e ("clk: scpi: add support for cpufreq virtual device") Reported-by:
Michał Zegan <webczat_200@poczta.onet.pl> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Dan Carpenter authored
commit a69261e4 upstream. The "goto err_armclk;" error path already does a clk_put(s3c_freq->hclk); so this is a double free. Fixes: 34ee5507 ([CPUFREQ] Add S3C2416/S3C2450 cpufreq driver) Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Suravee Suthikulpanit authored
commit 84a21dbd upstream. Pass-through devices to VM guest can get updated IRQ affinity information via irq_set_affinity() when not running in guest mode. Currently, AMD IOMMU driver in GA mode ignores the updated information if the pass-through device is setup to use vAPIC regardless of guest_mode. This could cause invalid interrupt remapping. Also, the guest_mode bit should be set and cleared only when SVM updates posted-interrupt interrupt remapping information. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Fixes: d98de49a ('iommu/amd: Enable vAPIC interrupt remapping mode by default') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Pan Bian authored
commit 73dbd4a4 upstream. In function amd_iommu_bind_pasid(), the control flow jumps to label out_free when pasid_state->mm and mm is NULL. And mmput(mm) is called. In function mmput(mm), mm is referenced without validation. This will result in a NULL dereference bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Fixes: f0aac63b ('iommu/amd: Don't hold a reference to mm_struct') Signed-off-by:
-
Robin Murphy authored
commit 938f1bbe upstream. Even if a host controller's CPU-side MMIO windows into PCI I/O space do happen to leak into PCI memory space such that it might treat them as peer addresses, trying to reserve the corresponding I/O space addresses doesn't do anything to help solve that problem. Stop doing a silly thing. Fixes: fade1ec0 ("iommu/dma: Avoid PCI host bridge windows") Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Robin Murphy authored
commit 797a8b4d upstream. We wouldn't normally expect ops->attach_dev() to fail, but on IOMMUs with limited hardware resources, or generally misconfigured systems, it is certainly possible. We report failure correctly from the external iommu_attach_device() interface, but do not do so in iommu_group_add() when attaching to the default domain. The result of failure there is that the device, group and domain all get left in a broken, part-configured state which leads to weird errors and misbehaviour down the line when IOMMU API calls sort-of-but-don't-quite work. Check the return value of __iommu_attach_device() on the default domain, and refactor the error handling paths to cope with its failure and clean up correctly in such cases. Fixes: e39cb8a3 ("iommu: Make sure a device is always attached to a domain") Reported-by:
Punit Agrawal <punit.agrawal@arm.com> Signed-off-by:
-
David Dillow authored
commit f7116e11 upstream. dma_pte_free_level() recurses down the IOMMU page tables and frees directory pages that are entirely contained in the given PFN range. Unfortunately, it incorrectly calculates the starting address covered by the PTE under consideration, which can lead to it clearing an entry that is still in use. This occurs if we have a scatterlist with an entry that has a length greater than 1026 MB and is aligned to 2 MB for both the IOMMU and physical addresses. For example, if __domain_mapping() is asked to map a two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000, it will ask if dma_pte_free_pagetable() is asked to PFNs from 0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from 0xffff80000 to 0xffff801ff because of this issue. The current code will set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside the range being cleared. Properly setting the level_pfn for the current level under consideration catches that this PTE is outside of the range being cleared. This patch also changes the value passed into dma_pte_free_level() when it recurses. This only affects the first PTE of the range being cleared, and is handled by the existing code that ensures we start our cursor no lower than start_pfn. This was found when using dma_map_sg() to map large chunks of contiguous memory, which immediatedly led to faults on the first access of the erroneously-deleted mappings. Fixes: 3269ee0b ("intel-iommu: Fix leaks in pagetable freeing") Reviewed-by:
Benjamin Serebrin <serebrin@google.com> Signed-off-by:
David Dillow <dillow@google.com> Signed-off-by:
-
Junxiao Bi authored
commit 33496c3c upstream. Configfs is the interface for ocfs2-tools to set configure to kernel and $configfs_dir/cluster/$clustername/heartbeat/dead_threshold is the one used to configure heartbeat dead threshold. Kernel has a default value of it but user can set O2CB_HEARTBEAT_THRESHOLD in /etc/sysconfig/o2cb to override it. Commit 45b99773 ("ocfs2/cluster: use per-attribute show and store methods") changed heartbeat dead threshold name while ocfs2-tools did not, so ocfs2-tools won't set this configurable and the default value is always used. So revert it. Fixes: 45b99773 ("ocfs2/cluster: use per-attribute show and store methods") Link: http://lkml.kernel.org/r/1490665245-15374-1-git-send-email-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit dbd68d8e upstream. flush_tlb_page() passes a bogus range to flush_tlb_others() and expects the latter to fix it up. native_flush_tlb_others() has the fixup but Xen's version doesn't. Move the fixup to flush_tlb_others(). AFAICS the only real effect is that, without this fix, Xen would flush everything instead of just the one page on remote vCPUs in when flush_tlb_page() was called. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e7b52ffd ("x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range") Link: http://lkml.kernel.org/r/10ed0e4dfea64daef10b87fb85df1746999b4dba.1492844372.git.luto@kernel.orgSigned-off-by:
-
Joerg Roedel authored
commit 5ed386ec upstream. When this function fails it just sends a SIGSEGV signal to user-space using force_sig(). This signal is missing essential information about the cause, e.g. the trap_nr or an error code. Fix this by propagating the error to the only caller of mpx_handle_bd_fault(), do_bounds(), which sends the correct SIGSEGV signal to the process. Signed-off-by:
-
Baoquan He authored
commit 8eabf42a upstream. Kernel text KASLR is separated into physical address and virtual address randomization. And for virtual address randomization, we only randomiza to get an offset between 16M and KERNEL_IMAGE_SIZE. So the initial value of 'virt_addr' should be LOAD_PHYSICAL_ADDR, but not the original kernel loading address 'output'. The bug will cause kernel boot failure if kernel is loaded at a different position than the address, 16M, which is decided at compiled time. Kexec/kdump is such practical case. To fix it, just assign LOAD_PHYSICAL_ADDR to virt_addr as initial value. Tested-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8391c73c ("x86/KASLR: Randomize virtual address separately") Link: http://lkml.kernel.org/r/1498567146-11990-3-git-send-email-bhe@redhat.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit e883d09c upstream. Just a minor fix done in: Fixes: 26a37ab3 ("x86/mce: Fix copy/paste error in exception table entries") Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/n/tip-ni9jzdd5yxlail6pq8cuexw2@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Doug Berger authored
commit 9e25ebfe upstream. The pmd containing memblock_limit is cleared by prepare_page_table() which creates the opportunity for early_alloc() to allocate unmapped memory if memblock_limit is not pmd aligned causing a boot-time hang. Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") attempted to resolve this problem, but there is a path through the adjust_lowmem_bounds() routine where if all memory regions start and end on pmd-aligned addresses the memblock_limit will be set to arm_lowmem_limit. Since arm_lowmem_limit can be affected by the vmalloc early parameter, the value of arm_lowmem_limit may not be pmd-aligned. This commit corrects this oversight such that memblock_limit is always rounded down to pmd-alignment. Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by:
Doug Berger <opendmb@gmail.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Lorenzo Pieralisi authored
commit cb7cf772 upstream. The BAD_MADT_GICC_ENTRY() macro checks if a GICC MADT entry passes muster from an ACPI specification standpoint. Current macro detects the MADT GICC entry length through ACPI firmware version (it changed from 76 to 80 bytes in the transition from ACPI 5.1 to ACPI 6.0 specification) but always uses (erroneously) the ACPICA (latest) struct (ie struct acpi_madt_generic_interrupt - that is 80-bytes long) length to check if the current GICC entry memory record exceeds the MADT table end in memory as defined by the MADT table header itself, which may result in false negatives depending on the ACPI firmware version and how the MADT entries are laid out in memory (ie on ACPI 5.1 firmware MADT GICC entries are 76 bytes long, so by adding 80 to a GICC entry start address in memory the resulting address may well be past the actual MADT end, triggering a false negative). Fix the BAD_MADT_GICC_ENTRY() macro by reshuffling the condition checks and update them to always use the firmware version specific MADT GICC entry length in order to carry out boundary checks. Fixes: b6cfb277 ("ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro") Reported-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Julien Grall <julien.grall@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Al Stone <ahs3@redhat.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Adam Ford authored
commit 06e1a5cc upstream. The manufacturing information is stored in the EEPROM. This chip is an AT24C64 not not (nor has it ever been) 24C02. This patch will correctly address the EEPROM to read the entire contents and not just 256 bytes (of 0xff). Fixes: 5e3447a2 ("ARM: dts: LogicPD Torpedo: Add AT24 EEPROM Support") Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Dave Gerlach authored
commit 04abaf07 upstream. Starting from commit 5de85b9d ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") pm_runtime core now changes device runtime_status back to after RPM_SUSPENDED after a probe defer. Certain OMAP devices make use of "ti,no-idle-on-init" flag which causes omap_device_enable to be called during the BUS_NOTIFY_ADD_DEVICE event during probe, along with pm_runtime_set_active. This call to pm_runtime_set_active typically will prevent a call to pm_runtime_get in a driver probe function from re-enabling the omap_device. However, in the case of a probe defer that happens before the driver probe function is able to run, such as a missing pinctrl states defer, pm_runtime_reinit will set the device as RPM_SUSPENDED and then once driver probe is actually able to run, pm_runtime_get will see the device as suspended and call through to the omap_device layer, attempting to enable the already enabled omap_device and causing errors like this: omap-gpmc 50000000.gpmc: omap_device: omap_device_enable() called from invalid state 1 omap-gpmc 50000000.gpmc: use pm_runtime_put_sync_suspend() in driver? We can avoid this error by making sure the pm_runtime status of a device matches the omap_device state before a probe attempt. By extending the omap_device bus notifier to act on the BUS_NOTIFY_BIND_DRIVER event we can check if a device is enabled in omap_device but with a pm_runtime status of RPM_SUSPENDED and once again mark the device as RPM_ACTIVE to avoid a second incorrect call to omap_device_enable. Fixes: 5de85b9d ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") Tested-by:
Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
-
Andrew F. Davis authored
commit 6308f178 upstream. When we check for additional DT properties in the current node we use the device_node passed in with the configuration data, this will not point to the correct DT node, use the one passed in for this purpose. Fixes: d2a2e729 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC") Reported-by:
Steven Kipisz <s-kipisz2@ti.com> Signed-off-by:
Andrew F. Davis <afd@ti.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Andrew F. Davis authored
commit 1c47f7c3 upstream. The three load switches are called SWA1, SWB1, and SWB2. The node names describing properties for these are expected to be the same, but due to a typo they are not. Fix this here. Fixes: d2a2e729 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC") Reported-by:
-
Johan Hovold authored
commit 8324147f upstream. Make sure to release the device-node reference taken in of_register_spi_device() on errors and when deregistering the device. Fixes: 284b0189 ("spi: Add OF binding support for SPI busses") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniel Kurtz authored
commit 88b0aa54 upstream. Back before commit 1dccb598 ("arm64: simplify dma_get_ops"), for arm64, devices for which dma_ops were not explicitly set were automatically configured to use swiotlb_dma_ops, since this was hard-coded as the global "dma_ops" in arm64_dma_init(). Now that global "dma_ops" has been removed, all devices much have their dma_ops explicitly set by a call to arch_setup_dma_ops(), otherwise the device is assigned dummy_dma_ops, and thus calls to map_sg for such a device will fail (return 0). Mediatek SPI uses DMA but does not use a dma channel. Support for this was added by commit c37f45b5 ("spi: support spi without dma channel to use can_dma()"), which uses the master_spi dev to DMA map buffers. The master_spi device is not a platform device, rather it is created in spi_alloc_device(), and therefore its dma_ops are never set. Therefore, when the mediatek SPI driver when it does DMA (for large SPI transactions > 32 bytes), SPI will use spi_map_buf()->dma_map_sg() to map the buffer for use in DMA. But dma_map_sg()->dma_map_sg_attrs() returns 0, because ops->map_sg is dummy_dma_ops->__dummy_map_sg, and hence spi_map_buf() returns -ENOMEM (-12). Fix this by using the real spi_master's parent device which should be a real physical device with DMA properties. Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Fixes: c37f45b5 ("spi: support spi without dma channel to use can_dma()") Cc: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by:
-
Matt Fleming authored
commit 6e5f32f7 upstream. If we crossed a sample window while in NO_HZ we will add LOAD_FREQ to the pending sample window time on exit, setting the next update not one window into the future, but two. This situation on exiting NO_HZ is described by: this_rq->calc_load_update < jiffies < calc_load_update In this scenario, what we should be doing is: this_rq->calc_load_update = calc_load_update [ next window ] But what we actually do is: this_rq->calc_load_update = calc_load_update + LOAD_FREQ [ next+1 window ] This has the effect of delaying load average updates for potentially up to ~9seconds. This can result in huge spikes in the load average values due to per-cpu uninterruptible task counts being out of sync when accumulated across all CPUs. It's safe to update the per-cpu active count if we wake between sample windows because any load that we left in 'calc_load_idle' will have been zero'd when the idle load was folded in calc_global_load(). This issue is easy to reproduce before, commit 9d89c257 ("sched/fair: Rewrite runnable load and utilization average tracking") just by forking short-lived process pipelines built from ps(1) and grep(1) in a loop. I'm unable to reproduce the spikes after that commit, but the bug still seems to be present from code review. Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Fixes: commit 5167e8d5 ("sched/nohz: Rewrite and fix load-avg computation -- again") Link: http://lkml.kernel.org/r/20170217120731.11868-2-matt@codeblueprint.co.ukSigned-off-by:
-
Eric Anholt authored
commit fedf266f upstream. The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730d ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Florian Westphal authored
commit 29e09229 upstream. inet_sk(skb->sk) is illegal in case skb is attached to request socket. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Reported by: Daniel J Blueman <daniel@quora.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Tested-by:
Daniel J Blueman <daniel@quora.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
commit 1e3d0c2c upstream. There are some missing error codes here so we accidentally return NULL instead of an error pointer. It results in a NULL pointer dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Dan Carpenter authored
commit e747f643 upstream. The default error code in pfkey_msg2xfrm_state() is -ENOBUFS. We added a new call to security_xfrm_state_alloc() which sets "err" to zero so there several places where we can return ERR_PTR(0) if kmalloc() fails. The caller is expecting error pointers so it leads to a NULL dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
-
Sabrina Dubroca authored
commit 9b3eb541 upstream. When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938 ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Ard Biesheuvel authored
commit 029c54b0 upstream. Existing code that uses vmalloc_to_page() may assume that any address for which is_vmalloc_addr() returns true may be passed into vmalloc_to_page() to retrieve the associated struct page. This is not un unreasonable assumption to make, but on architectures that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need to ensure that vmalloc_to_page() does not go off into the weeds trying to dereference huge PUDs or PMDs as table entries. Given that vmalloc() and vmap() themselves never create huge mappings or deal with compound pages at all, there is no correct answer in this case, so return NULL instead, and issue a warning. When reading /proc/kcore on arm64, you will hit an oops as soon as you hit the huge mappings used for the various segments that make up the mapping of vmlinux. With this patch applied, you will no longer hit the oops, but the kcore contents willl be incorrect (these regions will be zeroed out) We are fixing this for kcore specifically, so it avoids vread() for those regions. At least one other problematic user exists, i.e., /dev/kmem, but that is currently broken on arm64 for other reasons. Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.orgSigned-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Eugeniu Rosca authored
[ Upstream commit 79514ef6 ] Commit a47b70ea ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb072 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea ("ravb: unmap descriptors when freeing rings") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
