- 29 Sep, 2018 6 commits
-
-
Bjørn Mork authored
[ Upstream commit 922005c7 ] Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by:
Fred Veldini <fred.veldini@gmail.com> Reported-by:
Deshu Wen <dwen@sierrawireless.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Reported-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
[ Upstream commit 8540827e ] pppoe_rcv() needs to look back at the Ethernet header in order to lookup the PPPoE session. Therefore we need to ensure that the mac header is big enough to contain an Ethernet header. Otherwise eth_hdr(skb)->h_source might access invalid data. ================================================================== BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline] BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline] BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 __get_item drivers/net/ppp/pppoe.c:172 [inline] get_item drivers/net/ppp/pppoe.c:236 [inline] pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4447c9 RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9 RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004 RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 tun_alloc_skb drivers/net/tun.c:1532 [inline] tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== Fixes: 224cf5ad ("ppp: Move the PPP drivers") Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit a7f38002 ] The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value that is always non-zero and hence the wait for the link to drop always terminates prematurely. Fix this by using a logical not operator instead of a bitwise complement. This issue has been in the driver since pre-2.6.12-rc2. Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Willy Tarreau authored
[ Upstream commit 9824dfae ] Fields ->dev and ->next of struct ipddp_route may be copied to userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible to CAP_NET_ADMIN though. Let's manually copy the relevant fields instead of using memcpy(). BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Cc: Jann Horn <jannh@google.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit bbd6528d ] In the unlikely case ip6_xmit() has to call skb_realloc_headroom(), we need to call skb_set_owner_w() before consuming original skb, otherwise we risk a use-after-free. Bring IPv6 in line with what we do in IPv4 to fix this. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit c56cae23 ] When splitting a GSO segment that consists of encapsulated packets, the skb->mac_len of the segments can end up being set wrong, causing packet drops in particular when using act_mirred and ifb interfaces in combination with a qdisc that splits GSO packets. This happens because at the time skb_segment() is called, network_header will point to the inner header, throwing off the calculation in skb_reset_mac_len(). The network_header is subsequently adjust by the outer IP gso_segment handlers, but they don't set the mac_len. Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6 gso_segment handlers, after they modify the network_header. Many thanks to Eric Dumazet for his help in identifying the cause of the bug. Acked-by:
Dave Taht <dave.taht@gmail.com> Reviewed-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
- 26 Sep, 2018 34 commits
-
-
Greg Kroah-Hartman authored
-
Benjamin Poirier authored
commit 4e7dc08e upstream. When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfb ("e1000e: Separate signaling for link check/link up") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Benjamin Poirier authored
commit e2710dbf upstream. Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Benjamin Poirier authored
commit 3016e0a0 upstream. This reverts commit 19110cfb. This reverts commit 4110e02e. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfb ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfb ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfb is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789Signed-off-by:
-
Benjamin Poirier authored
commit 116f4a64 upstream. The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by:
-
Benjamin Poirier authored
commit 361a954e upstream. Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by:
-
Benjamin Poirier authored
commit 1f0ea197 upstream. This partially reverts commit 4aea7a5c. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.htmlSigned-off-by:
-
Benjamin Poirier authored
commit 745d0bd3 upstream. It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by:
-
David Ahern authored
commit f7225172 upstream. syzbot reported a use-after-free: BUG: KASAN: use-after-free in ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 Read of size 4 at addr ffff8801bf789cf0 by task syz-executor756/4555 CPU: 1 PID: 4555 Comm: syz-executor756 Not tainted 4.17.0-rc7+ #78 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 ip6_route_multipath_add+0x615/0x1910 net/ipv6/route.c:4303 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Allocated by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 dst_alloc+0xbb/0x1d0 net/core/dst.c:104 __ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:361 ip6_dst_alloc+0x29/0xb0 net/ipv6/route.c:376 ip6_route_info_create+0x4d4/0x3a30 net/ipv6/route.c:2834 ip6_route_multipath_add+0xc7e/0x1910 net/ipv6/route.c:4240 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Freed by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 dst_destroy+0x267/0x3c0 net/core/dst.c:140 dst_release_immediate+0x71/0x9e net/core/dst.c:205 fib6_add+0xa40/0x1650 net/ipv6/ip6_fib.c:1305 __ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011 ip6_route_multipath_add+0x513/0x1910 net/ipv6/route.c:4267 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... The problem is that rt_last can point to a deleted route if the insert fails. One reproducer is to insert a route and then add a multipath route that has a duplicate nexthop.e.g,: $ ip -6 ro add vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::2 $ ip -6 ro append vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::4 nexthop via 2001:db8:1::2 Fix by not setting rt_last until the it is verified the insert succeeded. Backport Note: - Upstream has replaced rt6_info usage with fib6_info in 8d1c802b ("net/ipv6: Flip FIB entries to fib6_info") - fib6_info_release was introduced upstream in 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes"), but is not present in stable kernels; 4.14.y relies on dst_release/ ip6_rt_put/dst_release_immediate. Fixes: 3b1137fe ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH") Cc: Eric Dumazet <edumazet@google.com> Reported-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Chris Wilson authored
commit c5ba5b24 upstream. We also see the delayed GTT write issue on i915g/i915gm, so let's presume that it is a universal problem for all !llc machines, and that we just haven't yet noticed on g33, gen4 and gen5 machines. v2: Use a register that exists on all platforms Testcase: igt/gem_mmap_gtt/coherency # i915gm References: https://bugs.freedesktop.org/show_bug.cgi?id=102577Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170907184520.5032-1-chris@chris-wilson.co.ukReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Jaechul Lee authored
commit 975b6a93 upstream. devm_gpiod_get is called with GPIOF_OUT_INIT_LOW but the function doesn't allow the parameters. Unluckily, GPIOF_OUT_INIT_LOW is same value as GPIOD_ASIS and gpio direction isn't set properly. Muted stream comes up when I try recording some sounds on TM2. mic-bias gpiod state can't be changed because the gpiod is created with the invalid parameter. The gpio should be set GPIOD_OUT_HIGH. Fixes: 1bfbc260 ("ASoC: samsung: Add machine driver for Exynos5433 based TM2 board") Signed-off-by:
Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Christophe Jaillet authored
commit 6431a7e3 upstream. If 'clk_prepare_enable()' fails, we must 'put' the corresponding clock. Othewise, there is a resource leak. Fixes: f5c97c7b ("ASoC: samsung: i2s: Handle return value of clk_prepare_enable.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Michal Simek authored
commit 182ead3e upstream. There is no reason to initialize uartclk to BASE_BAUD * 16 for DT based systems. [-stable comment: commit 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") has changed 8250_early.c behavior which now tries to setup UART speed. Already-backported upstream commit 0ff3ab70 ("serial: 8250_early: Only set divisor if valid clk & baud") handles properly uartclk not being set but it still requires backporting fix for wrong uartclk val. This fixes malformed early console output on arch-es with BASE_BAUD.] Fixes: 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Tested-by:
Matt Redfearn <matt.redfearn@mips.com> [rmilecki: add -stable comment and Fixes tag] Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Michal Simek authored
commit 814453ad upstream. On DT based platforms when current-speed property is present baudrate is setup. Also port->uartclk is initialized to bogus BASE_BAUD * 16 value. Drivers like uartps/ns16550 contain logic when baudrate and uartclk is used for baudrate calculation. The patch is reading optional clock-frequency property to replace bogus BASE_BAUD * 16 calculation to have proper baudrate calculation. [-stable comment: commit 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") has changed 8250_early.c behavior which now tries to setup UART speed. Ignoring clock-frequency results in wrong value of calculated divisor & malformed early console output.] Fixes: 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") Signed-off-by:
-
Dan Carpenter authored
commit b40b3e93 upstream. We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable@vger.kernel.org> Fixes: 582ab27a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Mikko Perttunen authored
[ Upstream commit f7b31822 ] When registering clocks, we just skip any that fail to register (leaving a NULL hole in the clock table). However, our of_xlate function still tries to dereference each entry while looking for the clock with the requested id, causing a crash if any clocks failed to register. Add a check to of_xlate to skip any NULL clocks. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 1cf86bc2 ] If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff302 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 05e0c828 ] If you do this on an sdm845 board: cat /sys/kernel/debug/pinctrl/3400000.pinctrl/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias bus hold, input bias disabled, input bias pull down, input bias pull up That's because msm_config_group_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. Fixes: f365be09 ("pinctrl: Add Qualcomm TLMM driver") Signed-off-by:
-
Ming Lei authored
[ Upstream commit 1311326c ] SCSI probing may synchronously create and destroy a lot of request_queues for non-existent devices. Any synchronize_rcu() in queue creation or destroy path may introduce long latency during booting, see detailed description in comment of blk_register_queue(). This patch removes one synchronize_rcu() inside blk_cleanup_queue() for this case, commit c2856ae2(blk-mq: quiesce queue before freeing queue) needs synchronize_rcu() for implementing blk_mq_quiesce_queue(), but when queue isn't initialized, it isn't necessary to do that since only pass-through requests are involved, no original issue in scsi_execute() at all. Without this patch and previous one, it may take more 20+ seconds for virtio-scsi to complete disk probe. With the two patches, the time becomes less than 100ms. Fixes: c2856ae2 ("blk-mq: quiesce queue before freeing queue") Reported-by:
Andrew Jones <drjones@redhat.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ming Lei authored
[ Upstream commit b04f50ab ] Only attempt to merge bio iff the ctx->rq_list isn't empty, because: 1) for high-performance SSD, most of times dispatch may succeed, then there may be nothing left in ctx->rq_list, so don't try to merge over sw queue if it is empty, then we can save one acquiring of ctx->lock 2) we can't expect good merge performance on per-cpu sw queue, and missing one merge on sw queue won't be a big deal since tasks can be scheduled from one CPU to another. Cc: Laurence Oberman <loberman@redhat.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Tested-by:
Kashyap Desai <kashyap.desai@broadcom.com> Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit cd0e0ca6 ] The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca0 ("drm/panel: add S6E8AA0 driver") Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountainSigned-off-by:
-
John Stultz authored
[ Upstream commit 1416270f ] In the past we've warned when ADJ_OFFSET was in progress, usually caused by ntpd or some other time adjusting daemon running in non steady sate, which can cause the skew calculations to be incorrect. Thus, this patch checks to see if the clock was being adjusted when we fail so that we don't cause false negatives. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Suggested-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit fa519f70 ] fc_rport_login() will be calling mutex_lock() while running inside an RCU-protected section, triggering the warning 'sleeping function called from invalid context'. To fix this we can drop the rcu functions here altogether as the disc mutex protecting the list itself is already held, preventing any list manipulation. Fixes: a407c593 ("scsi: libfc: Fixup disc_mutex handling") Signed-off-by:
Hannes Reinecke <hare@suse.com> Acked-by:
Johannes Thumshirn <jth@kernel.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Timo Wischer authored
[ Upstream commit ff2d6acd ] Without this commit the following intervals [x y), (x y) were be replaced to (y-1 y) by snd_interval_refine_last(). This was also done if y-1 is part of the previous interval. With this changes it will be replaced with [y-1 y) in case of y-1 is part of the previous interval. A similar behavior will be used for snd_interval_refine_first(). This commit adapts the changes for alsa-lib of commit 9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if also excluded before") Signed-off-by:
Timo Wischer <twischer@de.adit-jv.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 7874b919 ] When devm_ioremap fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling devm_ioremap. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Wei Lu authored
[ Upstream commit e47cb828 ] Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process. This fixes kernel oopses when a child process calls KFD ioctls with a file descriptor inherited from the parent process. Signed-off-by:
Wei Lu <wei.lu2@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 193c2a07 ] Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by:
Peter Rosin <peda@axentia.se> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Peter Rosin authored
[ Upstream commit 8c8f74f3 ] Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit b23ec599 ] Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 95067556 ] platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Tuomas Tynkkynen authored
[ Upstream commit 678c5b11 ] Currently, if bcm2835_audio_open() fails partway, the allocated workqueue is leaked. Avoid that. While at it, propagate the return value of bcm2835_audio_open_connection() on failure instead of returning -1. Signed-off-by:
Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by:
-
Suzuki K Poulose authored
[ Upstream commit 5cedd223 ] Add ETM PIDs of the Arm cortex-A CPUs to the white list of ETMs. While at it add a helper macro to make it easier to add the new entries. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Robin Murphy authored
[ Upstream commit ccff2dfa ] Probing the TPIU driver under UBSan triggers an out-of-bounds shift warning in coresight_timeout(): ... [ 5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16 [ 5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int' ... On closer inspection things are exponentially out of whack because we're passing a bitmask where a bit number should be. Amusingly, it seems that both calls will find their expected values by sheer luck and appear to succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2 (TCPresent) which apparently is usually tied high. Following the examples of other drivers, define separate FOO and FOO_BIT macros for masks vs. indices, and put things right. CC: Robert Walker <robert.walker@arm.com> CC: Mike Leach <mike.leach@linaro.org> CC: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 11595db8 ("coresight: Fix disabling of CoreSight TPIU") Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
[ Upstream commit fe470f5f ] If we fail to find the input / output port for a LINK component while enabling a path, we should fail gracefully rather than assuming port "0". Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
