- 13 Sep, 2022 12 commits
-
-
Jani Nikula authored
Move display IPC related member under drm_i915_private display sub-struct. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/04ccaaceee9293e5a6c75761ba9d36792c36f095.1662983005.git.jani.nikula@intel.com
-
Jani Nikula authored
It looks like trying to enable IPC via debugfs on platforms that don't have IPC resulted in dmesg info message about IPC being enabled, which is clearly not possible and would not happen. Seems sensible to register IPC debugfs only on platforms that have IPC. Signed-off-by:
-
Jani Nikula authored
Follow the new direction for debugfs files, moving the details where the implementation is. It seems quite natural skl_watermark.c is the place that controls IPC details, even for debugfs, not intel_display_debugfs.c. Rename the functions and convert dev_priv->i915 while at it. Signed-off-by:
-
Jani Nikula authored
Rename the IPC functions to have skl_watermark_ipc_ prefix, rename enable to update to reflect what the function actually does, and add enabled function to abstract direct ->ipc_enabled access for state query. Signed-off-by:
-
Jouni Högander authored
Use existing drm_atomic_helper_damage_merged from generic drm code instead of implementing own loop to iterate over damage_clips. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com>
-
Jouni Högander authored
drm_plane_state->src is modified when offset is calculated: before calculation: src.x1 = 8192, src.y1 = 8192 after calculation (pitch = 65536, cpp = 4, alignment = 262144) src.x1 = 8192, src.y1 = 0, offset = 0x20000000 Damage clips are relative to original coodrdinates provided by user-space. To compare these against src coordinates we need to use original coordinates as provided by user-space. These can be obtained by using drm_plane_state_src. Signed-off-by:
-
Jouni Högander authored
Selective update doesn't work if SU start address is 0 and start/end SDP is configured to be sent prior to SU start/end lines. PSR2 has to be disabled in this case for Alder Lake. HSDES: 22012279113 Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Jouni Högander authored
Equation for sending start/end SDP prior to the SU region start/end has changed. Update used formula. Bspec: 49274 Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The TV encoder has its own special clocking strategy, which means we can't just use intel_crtc_dotclock() to figure out what the resulting dotclock will be given the actual DPLL port_clock. Additionally the DPLL can't always generate exactly the frequency we initially asked for. This results in us computing a bogus dotclock/etc., and it won't match the readout which is handled by the encoder itself properly. Naturally the state checker becomes unhappy with the mismatch. To do this sanely we'll need to move the DPLL computation into encoder->compute_config() so that all the derived state gets correctly computed based on the actual DPLL output frequency. Start doing that just for the TV encoder initally as intel_crtc_dotclock() should be able to handle other encoder types well enough. Though eventually this should be done for all encoder types rather than doing it from intel_crtc_compute_config(). With this we actually do some of the DPLL state computation twice, but we can skip the second actual .find_dpll() search by flagging .clock_set=true after we've done it once. We also still need to avoid clobbering the correct adjusted_mode.crtc_clock set up by encoder->compute_config() when called a second time from intel_crtc_compute_config(). Fixes: 665a7b04 ("drm/i915: Feed the DPLL output freq back into crtc_state") Signed-off-by:
-
Ville Syrjälä authored
The child device block has gained a new bit for disabling compression for external displays. Seems stupid, but there it is. Signed-off-by:
-
Ville Syrjälä authored
We have the ACPI vs. not ACPI DPMS bit polarity the wrong way around. Fix it. Signed-off-by:
-
Jani Nikula authored
Drop the local intel_dp_phy_name() function, and replace with drm_dp_phy_name(). This lets us drop a number of local buffers. v2: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
- 12 Sep, 2022 6 commits
-
-
Radhakrishna Sripada authored
From Meteorlake, Latency Level, SAGV bloack time are read from LATENCY_SAGV register instead of the GT driver pcode mailbox. DDR type and QGV information are also to be read from Mem SS registers. v2: - Simplify MTL_MEM_SS_INFO_QGV_POINT macro(MattR) - Nit: Rearrange the bit def's from higher to lower(MattR) - Restore platform definition for ADL-P(MattR) - Move back intel_qgv_point def to intel_bw.c(Jani) v3: - Rebase Bspec: 64636, 64608 Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Original Author: Caz Yokoyama Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902060342.151824-9-radhakrishna.sripada@intel.com
-
Imre Deak authored
On MTL TypeC ports the AUX_CH_CTL and AUX_CH_DATA addresses have changed wrt. previous platforms, adjust the code accordingly. Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
Add support for display power wells on MTL. The differences from XE_LPD: - The AUX HW block is moved to the PICA block, where the registers are on an always-on power well and the functionality needs to be powered on/off via the AUX_CH_CTL register: [1], [2] - The DDI IO power on/off programming sequence is moved to the PHY PLL enable/disable sequence. [3], [4], [5] Bspec: [1] 49233, [2] 65247, [3] 64568, [4] 65451, [5] 65450 v2: - Update the comment in aux power well enable - Reuse the noop sync fn for aux sync. - Use REG_BIT for new register bit definitions Signed-off-by:
-
Radhakrishna Sripada authored
Add tables to map the GMBUS pin pairs to GPIO registers and port to DDC. From spec we have registers GPIO_CTL[1-5] mapped to native display phys and GPIO_CTL[9-12] are mapped to TC ports. v2: - Drop unused GPIO pins(MattR) BSpec: 49306 Cc: Matt Roper <matthew.d.roper@intel.com> Original Author: Brian J Lovin Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by:
-
Radhakrishna Sripada authored
Future platforms can read the IP version from a register and the IP version numbers need not be hard coded in device info. Move the ip version for media and display to runtime info. On platforms where hard coding of IP version is required, update the IP version in __runtime under device_info. v2: - Avoid name collision for ip versions(Jani) v4.1: - Fix build error in mock_gem_device.c v4.2: - Use ip instead of version for ip_vesion member.(MattR) Suggested-by:
-
Jani Nikula authored
Backmerge to sync the DP MST atomic changes to drm-intel-next. Signed-off-by:
-
- 11 Sep, 2022 2 commits
-
-
Melissa Wen authored
Replace vkms_formats macro for fixed-point operations with functions from drm/drm_fixed.h to do the same job and fix 32-bit compilation errors. v2: - don't cast results to s32 (Igor) - add missing drm_fixp2int conversion (Igor) Fixes: a19c2ac9858 ("drm: vkms: Add support to the RGB565 format") Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> (v1) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reported-by:Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220910190303.682897-1-mwen@igalia.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.1-rc1: [airlied - fix sun4i_tv build] UAPI Changes: - Hide unregistered connectors from GETCONNECTOR ioctl. - drm/virtio no longer advertises LINEAR modifier, as it doesn't work. - Cross-subsystem Changes: - Fix GPF in udmabuf failure path. Core Changes: - Rework TTM placement to use intersect/compatible functions. - Drop legacy DP-MST support. - More DP-MST related fixes, and move all state into atomic. - Make DRM_MIPI_DBI select DRM_KMS_HELPER. - Add audio_infoframe packing for DP. - Add logging when some atomic check functions fail. - Assorted documentation updates and fixes. Driver Changes: - Assorted cleanups and fixes in msm, lcdif, nouveau, virtio, panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via, bochs, qxl, sun4i. - Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels. - Improve DP-MST modeset state handling in amdgpu, nouveau, i915. - Drop DP-MST from radeon driver, it was broken and only user of legacy DP-MST. - Handle unplugging better in vc4. - Simplify drm cmdparser tests. - Add DP support to ti-sn65dsi86. - Add MT8195 DP support to mediatek. - Support RGB565, XRGB64, and ARGB64 formats in vkms. - Convert sun4i tv support to atomic. - Refactor vc4/vec TV Modesetting, and fix timings. - Use atomic helpers instead of simple display helpers in ssd130x. Maintainer changes: - Add Douglas Anderson as reviewer for panel-edp. Signed-off-by:
-
- 09 Sep, 2022 4 commits
-
-
Ville Syrjälä authored
Replace the hand rolled stuff with REG_FIELD_GET() for reading out the skl+ watermark latencies. Signed-off-by:
-
Ville Syrjälä authored
Pull all the skl+ watermark code (and the dbuf/sagv/ipc code since it's all sort of intertwined and I'm too lazy to think of a finer grained split right now) into its own file from the catch-all intel_pm.c. Also sneak in the s/dev_priv/i915/ rename while at it. Signed-off-by:
-
Ville Syrjälä authored
No reaon to have this humongous if ladder in intel_read_wm_latency(). Just split it into nicer per-platforms functions. Also do the s/dev_priv/i915/ while touching all of this code. Signed-off-by:
-
Jani Nikula authored
struct intel_dsb can be an opaque type, hidden in intel_dsb.c. Make it so. Reduce related includes while at it. Signed-off-by:
-
- 08 Sep, 2022 16 commits
-
-
Imre Deak authored
When an MST connector stays enabled during a commit the connector's MST state needs to be added to the atomic state, but the corresponding MST payload allocation shouldn't be set for deletion; fix such modesets by ensuring the above even if the connector was already enabled before the modeset. The issue led to the following: [ 761.992923] i915 0000:00:02.0: drm_WARN_ON(payload->delete) [ 761.992949] WARNING: CPU: 6 PID: 1401 at drivers/gpu/drm/display/drm_dp_mst_topology.c:4221 drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992955] Modules linked in: snd_hda_intel i915 drm_buddy drm_display_helper drm_kms_helper ttm drm snd_hda_codec_hdmi snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm prime_numbers i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal cdc_ether coretemp crct10dif_pclmul usbnet crc32_pclmul mii ghash_clmulni_intel e1000e mei_me ptp i2c_i801 pps_core mei i2c_smbus intel_lpss_pci fuse [last unloaded: drm] [ 761.992986] CPU: 6 PID: 1401 Comm: testdisplay Tainted: G U 6.0.0-rc4-imre+ #565 [ 761.992989] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022 [ 761.992990] RIP: 0010:drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992994] Code: 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 03 28 4e e1 48 c7 c1 8b 26 2c a0 4c 89 e2 48 c7 c7 a8 26 2c a0 48 89 c6 e8 31 d5 88 e1 <0f> 0b 49 8b 85 d0 00 00 00 4c 89 fa 48 c7 c6 a0 41 2c a0 48 8b 78 [ 761.992995] RSP: 0018:ffffc9000177ba60 EFLAGS: 00010286 [ 761.992998] RAX: 0000000000000000 RBX: ffff88810d2f1540 RCX: 0000000000000000 [ 761.992999] RDX: 0000000000000001 RSI: ffffffff82368a25 RDI: 00000000ffffffff [ 761.993000] RBP: ffff888142299d80 R08: ffff8884adbfdfe8 R09: 00000000ffefffff [ 761.993001] R10: ffff8884a6bfe000 R11: ffff8884ac443c30 R12: ffff888102972f90 [ 761.993002] R13: ffff8881163e2cf0 R14: 00000000000003ac R15: ffff88810c501000 [ 761.993003] FS: 00007f81e4c459c0(0000) GS:ffff888496500000(0000) knlGS:0000000000000000 [ 761.993004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 761.993005] CR2: 0000555dac962a98 CR3: 0000000123a34006 CR4: 0000000000770ee0 [ 761.993006] PKRU: 55555554 [ 761.993007] Call Trace: [ 761.993009] <TASK> [ 761.993012] intel_dp_mst_compute_config+0x19a/0x350 [i915] [ 761.993090] intel_atomic_check+0xf37/0x3180 [i915] [ 761.993168] drm_atomic_check_only+0x5d3/0xa60 [drm] [ 761.993182] drm_atomic_commit+0x56/0xc0 [drm] [ 761.993192] ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm] [ 761.993204] drm_atomic_helper_set_config+0x78/0xc0 [drm_kms_helper] [ 761.993214] drm_mode_setcrtc+0x1ed/0x750 [drm] [ 761.993232] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993241] drm_ioctl_kernel+0xb5/0x150 [drm] [ 761.993252] drm_ioctl+0x203/0x3d0 [drm] [ 761.993261] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993276] __x64_sys_ioctl+0x8a/0xb0 [ 761.993281] do_syscall_64+0x38/0x90 [ 761.993285] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 761.993287] RIP: 0033:0x7f81e551aaff [ 761.993288] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 761.993290] RSP: 002b:00007fff4304af10 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 761.993292] RAX: ffffffffffffffda RBX: 00007fff4304afa0 RCX: 00007f81e551aaff [ 761.993293] RDX: 00007fff4304afa0 RSI: 00000000c06864a2 RDI: 0000000000000004 [ 761.993294] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 0000555dac8a9c68 [ 761.993294] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000008c4 [ 761.993295] R13: 0000000000000004 R14: 0000555dac8a9c68 R15: 00007fff4304b098 [ 761.993301] </TASK> Fixes: 083351e9 ("drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()") Testcase: igt@testdisplay Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907142542.1681994-1-imre.deak@intel.com
-
Chen-Yu Tsai authored
This panel has the same delay timing as N116BCA-EA1 from the same company, which is also the same as delay_200_500_e80_d50. Add an entry for it. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Maxime Ripard authored
Our mode_set implementation can be merged into our atomic_enable implementation to simplify things, so let's do this. Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-36-459522d653a7@cerno.tech
-
Ville Syrjälä authored
Use round-to-nearest behavour when calculating the TMDS clock. Matches what we do for most other clock related things. Acked-by:
-
Ville Syrjälä authored
Windows/BIOS always uses fixed N values. Let's match that behaviour. Allows us to also get rid of that constant_n quirk stuff. Reviewed-by:
-
Ville Syrjälä authored
On BDW+ M/N are double buffered and so we can easily reprogram them during a fastset. So for eDP panels that support seamless DRRS we can just change these without a full modeset. For earlier platforms we'd need to play tricks with M1/N1 vs. M2/N2 during the fastset to make sure we do the switch atomically. Not sure the added complexity is worth the hassle, so leave it alone for now. The slight downside is that we have to keep the link running at a link rate capable of supporting the highest refresh rate we want to use. For the moment we just pick the highest mode the panel reports and calculate the link based on that. This might need further refinement (eg. if we run into bandwidth restrictions)... v2: Only use the high link rate if the platform really supports the seamless M/N change uring fastset (ie. bdw+) v3: Rebase due to HAS_DOUBLE_BUFFERED_M_N() Reviewed-by: -
Ville Syrjälä authored
Add a function to get the fixed_mode with the highest clock. The plan is to use this for the link bw calculation on seamless DRRS panels so that we alwasy end up with the same link params regardless of the requested refresh rate. This will allow fastset to do seamless refresh rate changes based on userspace request instead of having to go for a full modeset. TODO: the function name isn't great Reviewed-by:
-
Ville Syrjälä authored
No sense in calling intel_modeset_pipe_config_late() for a disabled pipe. Reviewed-by:
-
Ville Syrjälä authored
Now that we no longer do the fuzzy clock and M/N checks we can get rid of the fastset state copy hacks. Reviewed-by:
-
Ville Syrjälä authored
To make the fastboot checks at least somewhat sensible let's mark the expected DPLL as the active one right after we finished the state computation. Otherwise intel_pipe_config_compare() will always be comparing things against NULL/0. TODO: This is still not really right. If the previous commit had to fall back to the other PLL then the comparisong will now fail. I guess intel_pipe_config_compare() should rather be comparing port_dplls[] instead. But to do that we really should just unify every platform to use the port_dplls[] approach whether they have any need for PLL fallbacks or not. Acked-by:
-
Ville Syrjälä authored
Now that we backfeed the actual DPLL frequency into the compute crtc state all our clocks should come out exact. Reviewed-by:
-
Ville Syrjälä authored
Now that we no longer fuzz M/N during fastset these should match exctly. In order to get a match with what the BIOS does we need to round M/N down. And we do the opposite rounding when doing the readback. That gets us pretty much the same thing back. There can still be slight rounding differences between FDI M/N vs. the DPLL output so we allow for tiny deviation in intel_pipe_config_sanity_check(). v2: Tweak rounding/sanity check stuff a bit Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by:
-
Ville Syrjälä authored
Do the DPLL computation before fastset checks. This should allow us to get rid of all that horrible fuzzy clock handling for fastsets. Who knows how many bugs there are caused by our state not actually matching what the hardware will generate. Reviewed-by:
-
Ville Syrjälä authored
Fill port_clock and hw.adjusted_mode.crtc_clock with the actual frequency we're going to be getting from the hardware. This will let us accurately compute all derived state that depends on those. v2: Reintroduce iCLKIP WARN v3: Try to deal with VLV/BXT DSI PLL as well Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by:
-
Ville Syrjälä authored
Only reassign the pipe's DPLL if it's going through a full .compute_config() cycle. If OTOH it's just getting modeset eg. in order to change cdclk there doesn't seem much point in picking a new DPLL for it. This should also prevent .get_dplls() from seeing a funky port_clock for DP even in cases where the readout produces a non-standard clock and we (for some reason) have decided to not fully recompute the state to remedy the situation. Reviewed-by:
-
Ville Syrjälä authored
Currently we calculate a lot of things (pixel rate, watermarks, cdclk) trusting that the DPLL can generate the exact frequency we ask it. In practice that is not true and there can be certain amount of rounding involved. To allow us to eventually get accurate numbers for all our DPLL clock derived state we need to move the DPLL calculation to hapen much earlier. To that end we hoist it up to the just after the fastset checks. For now we just do the easy code motion, and the actual back feeding of the final DPLL clock into the state will come later. A slight change here is that now .crtc_compute_clock() can get called while the shared_dpll is still assigned. But since .crtc_compute_clock() no longer assignes new shared_dplls this is perfectly fine. TODO: I'd actually like to do this before the fastset check so that if the DPLL state should change we actually do the modeset. Which I think is what the video aficionados want, but it might not be what the fans of fastboot want. Not yet sure how to reconcile those conflicting requirements... v2: s/return/goto/ in error handling Reviewed-by:
-
