- 12 Jan, 2017 2 commits
-
-
Akinobu Mita authored
commit b4e8a0eb upstream. According to the datasheet, the shortest available integration time for ALS ADC conversion is 1.5625ms but illuminance_integration_time_available sysfs file shows wrong value. Cc: Crestez Dan Leonard <leonard.crestez@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Fixes: d5d8f49b ("max44000: Expose ambient sensor scaling") Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lorenzo Bianconi authored
commit 65c8aea0 upstream. Using realbits as i2c/spi read len, when that value is not byte aligned (e.g 12 bits), lead to skip msb part of out data registers. Fix this taking into account scan_type.shift in addition to scan_type.realbits as read length: read_len = DIV_ROUND_UP(realbits + shift, 8) This fix has been tested on 8, 12, 16, 24 bit sensors Fixes: e7385de5 ("iio:st_sensors: align on storagebits boundaries") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 09 Jan, 2017 38 commits
-
-
Greg Kroah-Hartman authored
-
Mika Kuoppala authored
commit b1b7ec98 upstream. For limiting the max frequency of gpu, the max freq tunable is not enough to hard limit the max gap. We now have also per client boost max freq. When this tunable was introduced, it was mistakenly made read only. Allow user to gain control by setting it writable. Fixes: 29ecd78d ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 73a79871) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Paulo Zanoni authored
commit 6ba0566c upstream. BSpec got updated and this workaround is now listed as standard required programming for all subsequent projects. This is confirmed to fix Skylake screen flickering issues (probably caused by the fact that we initialized a ring in the first page of stolen, but I didn't 100% confirm this theory). v2: this is the patch that fixes the screen flickering, document it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605Tested-by:
Dominik Klementowski <dominik232@gmail.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit d4353761) Signed-off-by:
-
Ville Syrjälä authored
commit 1f3dc3e3 upstream. Looks like we're only initializing dev_priv->atomic_cdclk_freq at resume and commit times, not at init time. Let's do that as well. We're now hitting the 'WARN_ON(intel_state->cdclk == 0)' in hsw_compute_linetime_wm() on account of populating intel_state->cdclk from dev_priv->atomic_cdclk_freq. Previously we were mispopulating intel_state->cdclk with dev_priv->cdclk_freq which always had a proper value at init time and hence the WARN_ON() didn't trigger. Cc: Matthew Auld <matthew.auld@intel.com> Reported-by:
Matthew Auld <matthew.auld@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98902 Fixes: 14676ec6 ("drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480428837-4207-1-git-send-email-ville.syrjala@linux.intel.comTested-by:
-
Ville Syrjälä authored
commit 14676ec6 upstream. When we end up not recomputing the cdclk, we need to populate intel_state->cdclk with the "atomic_cdclk_freq" instead of the current cdclk_freq. When no pipes are active, the actual cdclk_freq may be lower than what the configuration of the planes and pipes would require from the point of view of the software state. This fixes bogus WARNS from skl_max_scale() which is trying to check the plane software state against the cdclk frequency. So any time it got called during DPMS off for instance, we might have tripped the warn if the current mode would have required a higher than minimum cdclk. v2: Drop the dev_cdclk stuff (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: bruno.pagani@ens-lyon.org Cc: Daniel J Blueman <daniel.blueman@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Paul Bolle <pebolle@tiscali.nl> Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1) Fixes: 1a617b77 ("drm/i915: Keep track of the cdclk as if all crtc's were active.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-2-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit e0ca7a6b) Signed-off-by:
-
Hans de Goede authored
commit bb98e72a upstream. On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
commit 22ca0d49 upstream. Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio. Fixes: a0a6d4ff ("drm/i915/dsi: add support for gpio elements on CHV") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 8354491c upstream. Since commit 71ce391d ("net: mvpp2: enable proper per-CPU TX buffers unmapping"), we are not correctly DMA unmapping TX buffers for fragments. Indeed, the mvpp2_txq_inc_put() function only stores in the txq_cpu->tx_buffs[] array the physical address of the buffer to be DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use skb_headlen(skb) to get the size to be unmapped. Both of this works fine for TX descriptors that are associated directly to a SKB, but not the ones that are used for fragments, with a NULL pointer as skb: - We have a NULL physical address when calling DMA unmap - skb_headlen(skb) crashes because skb is NULL This causes random crashes when fragments are used. To solve this problem, we need to: - Store the physical address of the buffer to be unmapped unconditionally, regardless of whether it is tied to a SKB or not. - Store the length of the buffer to be unmapped, which requires a new field. Instead of adding a third array to store the length of the buffer to be unmapped, and as suggested by David Miller, this commit refactors the tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is added. Therefore, instead of having three arrays to allocate/free, we have a single one, which also improve data locality, reducing the impact on the CPU cache. Fixes: 71ce391d ("net: mvpp2: enable proper per-CPU TX buffers unmapping") Reported-by:
Raphael G <raphael.glon@corp.ovh.com> Cc: Raphael G <raphael.glon@corp.ovh.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Al Viro authored
commit 128394ef upstream. Both damn things interpret userland pointers embedded into the payload; worse, they are actually traversing those. Leaving aside the bad API design, this is very much _not_ safe to call with KERNEL_DS. Bail out early if that happens. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit 79e51b5c upstream. Currently it is impossible to edit the value of a config symbol with a prompt longer than (terminal width - 2) characters. dialog_inputbox() calculates a negative x-offset for the input window and newwin() fails as this is invalid. It also doesn't check for this failure, so it busy-loops calling wgetch(NULL) which immediately returns -1. The additions in the offset calculations also don't match the intended size of the window. Limit the window size and calculate the offset similarly to show_scroll_win(). Fixes: 692d97c3 ("kconfig: new configuration interface (nconfig)") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Andy Grover authored
commit d0905ca7 upstream. Don't free the cmd in tcmu_check_expired_cmd, it's still referenced by an entry in our cmd_id->cmd idr. If userspace ever resumes processing, tcmu_handle_completions() will use the now-invalid cmd pointer. Instead, don't free cmd. It will be freed by tcmu_handle_completion() if userspace ever recovers, or tcmu_free_device if not. Reported-by:
Bryant G Ly <bgly@us.ibm.com> Tested-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Dan Williams authored
commit af7d9f0c upstream. Fix the format specifier so that the attribute can be parsed correctly. Currently it returns decimal 1000 for a 4096-byte alignment. Reported-by:
Dave Jiang <dave.jiang@intel.com> Fixes: 315c5625 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
David Daney authored
commit b6cc9474 upstream. On arm64 NUMA kernels we can pass "numa=off" on the command line to disable NUMA. A side effect of this is that kmalloc_node() calls to non-zero nodes will crash the system with an OOPS: [ 0.000000] ITS@0x0000901000020000: allocated 2097152 Devices @10002000000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00001680 [ 0.000000] pgd = fffffc0009470000 [ 0.000000] [00001680] *pgd=0000010ffff90003, *pud=0000010ffff90003, *pmd=0000010ffff90003, *pte=0000000000000000 [ 0.000000] Internal error: Oops: 96000006 [#1] SMP . . . [ 0.000000] [<fffffc00081c8950>] __alloc_pages_nodemask+0xa4/0xe68 [ 0.000000] [<fffffc000821fa70>] new_slab+0xd0/0x564 [ 0.000000] [<fffffc0008221e24>] ___slab_alloc+0x2e4/0x514 [ 0.000000] [<fffffc0008239498>] __slab_alloc+0x48/0x58 [ 0.000000] [<fffffc0008222c20>] __kmalloc_node+0xd0/0x2dc [ 0.000000] [<fffffc0008115374>] __irq_domain_add+0x7c/0x164 [ 0.000000] [<fffffc0008b461dc>] its_probe+0x784/0x81c [ 0.000000] [<fffffc0008b462bc>] its_init+0x48/0x1b0 [ 0.000000] [<fffffc0008b4543c>] gic_init_bases+0x228/0x360 [ 0.000000] [<fffffc0008b456bc>] gic_of_init+0x148/0x1cc [ 0.000000] [<fffffc0008b5aec8>] of_irq_init+0x184/0x298 [ 0.000000] [<fffffc0008b43f9c>] irqchip_init+0x14/0x38 [ 0.000000] [<fffffc0008b12d60>] init_IRQ+0xc/0x30 [ 0.000000] [<fffffc0008b10a3c>] start_kernel+0x240/0x3b8 [ 0.000000] [<fffffc0008b101c4>] __primary_switched+0x30/0x6c [ 0.000000] Code: 912ec2a0 b9403809 0a0902fb 37b007db (f9400300) . . . This is caused by code like this in kernel/irq/irqdomain.c domain = kzalloc_node(sizeof(*domain) + (sizeof(unsigned int) * size), GFP_KERNEL, of_node_to_nid(of_node)); When NUMA is disabled, the concept of a node is really undefined, so of_node_to_nid() should unconditionally return NUMA_NO_NODE. Fix by returning NUMA_NO_NODE when the nid is not in the set of possible nodes. Reported-by:
Gilbert Netzer <noname@pdc.kth.se> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Nicholas Piggin authored
commit ff45000f upstream. The boot wrapper performs its own relocations and does not require PT_INTERP segment. However currently we don't tell the linker that. Prior to binutils 2.28 that works OK. But since binutils commit 1a9ccd70f9a7 ("Fix the linker so that it will not silently generate ELF binaries with invalid program headers. Fix readelf to report such invalid binaries.") binutils tries to create a program header segment due to PT_INTERP, and the link fails because there is no space for it: ld: arch/powerpc/boot/zImage.pseries: Not enough room for program headers, try linking with -N ld: final link failed: Bad value So tell the linker not to do that, by passing --no-dynamic-linker. Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Drop dependency on ld-version.sh and massage change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Geoff Levand authored
commit 6dff5b67 upstream. GCC 5 generates different code for this bootwrapper null check that causes the PS3 to hang very early in its bootup. This check is of limited value, so just get rid of it. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Nicholas Piggin authored
commit f87f253b upstream. From 80f23935 ("powerpc: Convert cmp to cmpd in idle enter sequence"): PowerPC's "cmp" instruction has four operands. Normally people write "cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently people forget, and write "cmp" with just three operands. With older binutils this is silently accepted as if this was "cmpw", while often "cmpd" is wanted. With newer binutils GAS will complain about this for 64-bit code. For 32-bit code it still silently assumes "cmpw" is what is meant. In this case, cmpwi is called for, so this is just a build fix for new toolchains. Signed-off-by:
-
NeilBrown authored
commit 1cded9d2 upstream. There are two problems with refcounting of auth_gss messages. First, the reference on the pipe->pipe list (taken by a call to rpc_queue_upcall()) is not counted. It seems to be assumed that a message in pipe->pipe will always also be in pipe->in_downcall, where it is correctly reference counted. However there is no guaranty of this. I have a report of a NULL dereferences in rpc_pipe_read() which suggests a msg that has been freed is still on the pipe->pipe list. One way I imagine this might happen is: - message is queued for uid=U and auth->service=S1 - rpc.gssd reads this message and starts processing. This removes the message from pipe->pipe - message is queued for uid=U and auth->service=S2 - rpc.gssd replies to the first message. gss_pipe_downcall() calls __gss_find_upcall(pipe, U, NULL) and it finds the *second* message, as new messages are placed at the head of ->in_downcall, and the service type is not checked. - This second message is removed from ->in_downcall and freed by gss_release_msg() (even though it is still on pipe->pipe) - rpc.gssd tries to read another message, and dereferences a pointer to this message that has just been freed. I fix this by incrementing the reference count before calling rpc_queue_upcall(), and decrementing it if that fails, or normally in gss_pipe_destroy_msg(). It seems strange that the reply doesn't target the message more precisely, but I don't know all the details. In any case, I think the reference counting irregularity became a measureable bug when the extra arg was added to __gss_find_upcall(), hence the Fixes: line below. The second problem is that if rpc_queue_upcall() fails, the new message is not freed. gss_alloc_msg() set the ->count to 1, gss_add_msg() increments this to 2, gss_unhash_msg() decrements to 1, then the pointer is discarded so the memory never gets freed. Fixes: 9130b8db ("SUNRPC: allow for upcalls for same uid but different gss service") Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1011250Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 54e4a0df upstream. We must not call nfs_pageio_init_read() on a new nfs_pageio_descriptor while holding a reference to a layout segment, as that can deadlock pnfs_update_layout(). Fixes: d67ae825 ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by:
-
Trond Myklebust authored
commit ae5a459d upstream. We must ensure that we don't schedule a layoutreturn if the layout stateid has been marked as invalid. Fixes: 2a59a041 ("pNFS: Fix pnfs_set_layout_stateid() to clear...") Signed-off-by:
-
Trond Myklebust authored
commit 7b650994 upstream. If we no longer hold any layout segments, we're normally expected to consider the layout stateid to be invalid. However we cannot assume this if we're about to, or in the process of sending a layoutreturn. Fixes: 334a8f37 ("pNFS: Don't forget the layout stateid if...") Signed-off-by:
-
Trond Myklebust authored
commit 6604b203 upstream. If there is an I/O error, we should not call LAYOUTGET until the LAYOUTRETURN that reports the error is complete. Signed-off-by:
-
Al Viro authored
commit c0cf3ef5 upstream. What matters when deciding if we should make a page uptodate is not how much we _wanted_ to copy, but how much we actually have copied. As it is, on architectures that do not zero tail on short copy we can leave uninitialized data in page marked uptodate. Signed-off-by:
-
Ilya Dryomov authored
commit 5c056fdc upstream. After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b), the client gets back a ceph_x_authorize_reply, which it is supposed to verify to ensure the authenticity and protect against replay attacks. The code for doing this is there (ceph_x_verify_authorizer_reply(), ceph_auth_verify_authorizer_reply() + plumbing), but it is never invoked by the the messenger. AFAICT this goes back to 2009, when ceph authentication protocols support was added to the kernel client in 4e7a5dcd ("ceph: negotiate authentication protocol; implement AUTH_NONE protocol"). The second param of ceph_connection_operations::verify_authorizer_reply is unused all the way down. Pass 0 to facilitate backporting, and kill it in the next commit. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Alan Stern authored
commit 6496ebd7 upstream. One some systems, the firmware does not allow certain PCI devices to be put in deep D-states. This can cause problems for wakeup signalling, if the device does not support PME# in the deepest allowed suspend state. For example, Pierre reports that on his system, ACPI does not permit his xHCI host controller to go into D3 during runtime suspend -- but D3 is the only state in which the controller can generate PME# signals. As a result, the controller goes into runtime suspend but never wakes up, so it doesn't work properly. USB devices plugged into the controller are never detected. If the device relies on PME# for wakeup signals but is not capable of generating PME# in the target state, the PCI core should accurately report that it cannot do wakeup from runtime suspend. This patch modifies the pci_dev_run_wake() routine to add this check. Reported-by:
Pierre de Villemereuil <flyos@mailoo.org> Tested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Shiraz Saleem authored
commit 91c42b72 upstream. hw_stats is a pointer to i40_iw_dev_stats struct in i40iw_get_hw_stats(). Use hw_stats and not &hw_stats in the memcpy to copy the i40iw device stats data into rdma_hw_stats counters. Fixes: b40f4757 ("IB/core: Make device counter infrastructure dynamic") Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
Faisal Latif <faisal.latif@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 3f9ca755 upstream. New inode operations were forgotten to be added to bad_inode. Most of the time the op is checked for NULL before being called but marking the inode bad and the check can race (very unlikely). However in case of ->get_link() only DCACHE_SYMLINK_TYPE is checked before calling the op, so there's no race and will definitely oops when trying to follow links on such a beast. Also remove comments about extinct ops. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Jingkui Wang authored
commit 5a8a6b89 upstream. We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by:
Jingkui Wang <jkwang@google.com> Fixes: 7132fe4f ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
commit d183e4ef upstream. A break is missing resulting in the hue control enabling or disabling the decode completely. Fix it. Fixes: c43875f6 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Andrey Utkin authored
commit 5fc4b067 upstream. This fixes a lockup at device probing which happens on some solo6010 hardware samples. This is a regression introduced by commit e1ceb25a ("[media] SOLO6x10: remove unneeded register locking and barriers") The observed lockup happens in solo_set_motion_threshold() called from solo_motion_config(). This extra "flushing" is not fundamentally needed for every write, but apparently the code in driver assumes such behaviour at last in some places. Actual fix was proposed by Hans Verkuil. Fixes: e1ceb25a ("[media] SOLO6x10: remove unneeded register locking and barriers") Signed-off-by:
Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Marek Szyprowski authored
commit 3467c9a7 upstream. s5p_mfc_alloc_memdev() function lacks proper releasing of allocated device in case of reserved memory initialization failure. This results in NULL pointer dereference: [ 2.828457] Unable to handle kernel NULL pointer dereference at virtual address 00000001 [ 2.835089] pgd = c0004000 [ 2.837752] [00000001] *pgd=00000000 [ 2.844696] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 2.848680] Modules linked in: [ 2.851722] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc6-00002-gafa1b97 #878 [ 2.859357] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.865433] task: ef080000 task.stack: ef06c000 [ 2.869952] PC is at strcmp+0x0/0x30 [ 2.873508] LR is at platform_match+0x84/0xac [ 2.877847] pc : [<c032621c>] lr : [<c03f65e8>] psr: 20000013 [ 2.877847] sp : ef06dea0 ip : 00000000 fp : 00000000 [ 2.889303] r10: 00000000 r9 : c0b34848 r8 : c0b1e968 [ 2.894511] r7 : 00000000 r6 : 00000001 r5 : c086e7fc r4 : eeb8e010 [ 2.901021] r3 : 0000006d r2 : 00000000 r1 : c086e7fc r0 : 00000001 [ 2.907533] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.914649] Control: 10c5387d Table: 4000404a DAC: 00000051 [ 2.920378] Process swapper/0 (pid: 1, stack limit = 0xef06c210) [ 2.926367] Stack: (0xef06dea0 to 0xef06e000) [ 2.930711] dea0: eeb8e010 c0c2d91c c03f4a6c c03f4a8c 00000000 c0c2d91c c03f4a6c c03f2fc8 [ 2.938870] dec0: ef003274 ef10c4c0 c0c2d91c ef10cc80 c0c21270 c03f3fa4 c09c1be8 c0c2d91c [ 2.947028] dee0: 00000006 c0c2d91c 00000006 c0b3483c c0c47000 c03f5314 c0c2d908 c0b5fed8 [ 2.955188] df00: 00000006 c010178c 60000013 c0a4ef14 00000000 c06feaa0 ef080000 60000013 [ 2.963347] df20: 00000000 c0c095c8 efffca76 c0816b8c 000000d5 c0134098 c0b34848 c09d6cdc [ 2.971506] df40: c0a4de70 00000000 00000006 00000006 c0c09568 efffca40 c0b5fed8 00000006 [ 2.979665] df60: c0b3483c c0c47000 000000d5 c0b34848 c0b005a4 c0b00d84 00000006 00000006 [ 2.987824] df80: 00000000 c0b005a4 00000000 c06fb4d8 00000000 00000000 00000000 00000000 [ 2.995983] dfa0: 00000000 c06fb4e0 00000000 c01079b8 00000000 00000000 00000000 00000000 [ 3.004142] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.012302] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 3.020469] [<c032621c>] (strcmp) from [<c03f65e8>] (platform_match+0x84/0xac) [ 3.027672] [<c03f65e8>] (platform_match) from [<c03f4a8c>] (__driver_attach+0x20/0xb0) [ 3.035654] [<c03f4a8c>] (__driver_attach) from [<c03f2fc8>] (bus_for_each_dev+0x54/0x88) [ 3.043812] [<c03f2fc8>] (bus_for_each_dev) from [<c03f3fa4>] (bus_add_driver+0xe8/0x1f4) [ 3.051971] [<c03f3fa4>] (bus_add_driver) from [<c03f5314>] (driver_register+0x78/0xf4) [ 3.059958] [<c03f5314>] (driver_register) from [<c010178c>] (do_one_initcall+0x3c/0x16c) [ 3.068123] [<c010178c>] (do_one_initcall) from [<c0b00d84>] (kernel_init_freeable+0x120/0x1ec) [ 3.076802] [<c0b00d84>] (kernel_init_freeable) from [<c06fb4e0>] (kernel_init+0x8/0x118) [ 3.084958] [<c06fb4e0>] (kernel_init) from [<c01079b8>] (ret_from_fork+0x14/0x3c) [ 3.092506] Code: 1afffffb e12fff1e e1a03000 eafffff7 (e4d03001) [ 3.098618] ---[ end trace 511bf9d750810709 ]--- [ 3.103207] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes this issue. Fixes: c79667dd ("media: s5p-mfc: replace custom reserved memory handling code with generic one") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Antti Palosaari authored
commit d930b5b5 upstream. A register used to identify chip during probe was overwritten during firmware download and due to that later probe's for warm chip were failing. Detect chip from the another register, which is located on different register bank 2. Fixes: 7908fad9 ("[media] mn88473: finalize driver") Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
commit 365fe4e0 upstream. A register used to identify chip during probe was overwritten during firmware download and due to that later probe's for warm chip were failing. Detect chip from the another register, which is located on different register bank 2. Fixes: 94d0eaa4 ("[media] mn88472: move out of staging to media") Signed-off-by:
-
Bart Van Assche authored
commit fba332b0 upstream. Code that dereferences the struct net_device ip_ptr member must be protected with an in_dev_get() / in_dev_put() pair. Hence insert calls to these functions. Fixes: commit 7b85627b ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by:
Moni Shoua <monis@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Bart Van Assche authored
commit e259934d upstream. A socket is associated with every QP by the rxe driver but sock_release() is never called. Add a call to sock_release() in rxe_qp_cleanup(). Fixes: commit 8700e3e7c48A5 ("Add Soft RoCE driver") Signed-off-by:
-
Bart Van Assche authored
commit d3a2418e upstream. This patch avoids that Coverity complains about not checking the ib_find_pkey() return value. Fixes: commit 547af765 ("IB/multicast: Report errors on multicast groups if P_key changes") Signed-off-by:
-
Bart Van Assche authored
commit 11b642b8 upstream. This patch avoids that Coverity reports the following: Using uninitialized value port_attr.state when calling printk Fixes: commit 94232d9c ("IPoIB: Start multicast join process only on active ports") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
commit 2fe2f378 upstream. The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS (80) elements. Hence compare the array index with that value instead of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity reports the following: Overrunning array class->method_table of 80 8-byte elements at element index 127 (byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class) (which evaluates to 127). Fixes: commit b7ab0b19 ("IB/mad: Verify mgmt class in received MADs") Signed-off-by:
Hal Rosenstock <hal@mellanox.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 794de08a upstream. Both the wakeup and irqsoff tracers can use the function graph tracer when the display-graph option is set. The problem is that they ignore the notrace file, and record the entry of functions that would be ignored by the function_graph tracer. This causes the trace->depth to be recorded into the ring buffer. The set_graph_notrace uses a trick by adding a large negative number to the trace->depth when a graph function is to be ignored. On trace output, the graph function uses the depth to record a stack of functions. But since the depth is negative, it accesses the array with a negative number and causes an out of bounds access that can cause a kernel oops or corrupt data. Have the print functions handle cases where a tracer still records functions even when they are in set_graph_notrace. Also add warnings if the depth is below zero before accessing the array. Note, the function graph logic will still prevent the return of these functions from being recorded, which means that they will be left hanging without a return. For example: # echo '*spin*' > set_graph_notrace # echo 1 > options/display-graph # echo wakeup > current_tracer # cat trace [...] _raw_spin_lock() { preempt_count_add() { do_raw_spin_lock() { update_rq_clock(); Where it should look like: _raw_spin_lock() { preempt_count_add(); do_raw_spin_lock(); } update_rq_clock(); Cc: Namhyung Kim <namhyung.kim@lge.com> Fixes: 29ad23b0 ("ftrace: Add set_graph_notrace filter") Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
