For aesthetics, move this functions to a more logical spot in the
code and add a docbook comment for the exported function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, make the actual "request" function static and change
mite_request_channel_in_range() into a wrapper that calls the internal
function. Change the inline function that requests any free channel
into an export that also calls the internal function.

Move the functions to a more logical spot in the code and add docbook
comments for the exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move the functions that allocate/free and initialize
the mite dma ring. They are currently kind of scattered around the
code.

Add docbook comments for the exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev_err() messages with pci_ioremap_bar() fails are just noise.
Remove them.

The 'use_win1' and 'fifo_size' dev_info() messages are also noise
but they may be useful when debugging. Change them to dev_dbg().

Absorb dump_chip_signnature() and change the pr_info() messages
to dev_dbg(). These also might be useful when debugging.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently all the drivers that use the mite driver have to call
mite_setup() after allocating and initializing the mite device
with mite_attach().

Move the mite_setup() call into mite_attach() to simplify the
drivers a bit and remove the need for the additional inline and
exported functions.

For aesthetics, move mite_setup2(), and rename it to mite_setup(),
so it's near mite_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are basically the comedi_driver (*attach)/(*detach)
for this driver.

For aesthetics, rename mite_alloc() to mite_attach() and pass the
comedi_device pointer to it instead of the pci_dev pointer.

Move the functions to the end of the file. This is typically where
a comedi_drivers (*attach)/(*detach) are located.

Add some docbook comments for these exported functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a local variable to mite_buf_change() so that the prefered
form of passing a struct size, sizeof(*p), can be used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to handle the dma_free_coherent() of
the mite dma descriptors.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An allocated mite_channel will have its 'ring' member initialized
to point to the mite_ring that will be used for DMA. A non-allocated
mite_channel will have a 'ring' member set to NULL, either by a
channel release or due to the initial kzalloc of the 'mite' struct.

Refactor the code to use the mite_chan->ring to detect in a channel
is allocated and remove the unnecessary member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this member of struct mite to 'mmio' to help shorten the long lines.

Add a local variable for the mite pointer in the ni_pcimio driver
to clarify and shorten the long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable for the mite_dma_desc pointer to help clarify
this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this member of struct mite_ring to 'descs' to help shorten the
long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this member of struct mite_ring to 'dma_addr' to help shorten the
long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this name to 'mite_ring' to help shorten the long lines.

In the ni_660x driver, also shorten the private data member 'mite_rings'
to simply 'ring'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this struct to 'mite_dma_desc' to help shorten the long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this struct to simply 'mite'. The current name is a bit redundant.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align wrapped lines to parentheses (if applicable).
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Spaces after casts are removed
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

added operator white space and parentheses for readability
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added lines between functions in skein_block.c and removed unneeded
lines in skein_block.c
Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When handle_get_mac_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes conditional comparison of if statement as if (ret)
instead of using if (ret != 0)
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When handle_get_ip_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due to have
a single statement.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed typo
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue
Signed-off-by: Jacky Boen <aqiank@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is not kernel coding style to give an extra space after a cast.
We get warned about it by checkpatch.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch complains about an extra blank line after an opening brace.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is not the kernel coding style to assign values to some variable in
if statement. Split them up into different statements.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>