This commit changes variable names that can cause confusion.

For example, variable DST_MIN is quite confusing since the
keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl.

On the following commit, 'dst_min' will be used to set destination IP,
and the existing variable name DST_MIN should be changed.

Variable names are matched to the exact keyword used with pg_ctrl.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
netdevsim: implement devlink dev_info op

Initial implementation of devlink dev_info op - just driver name is
filled up and sent to user. Bundled with selftest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test to verify netdevsim driver name returned by devlink dev info.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do simple dev_info devlink operation implementation which only fills up
the driver name.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order for attrs to be prepared for reporter dump dumpit callback,
set GENL_DONT_VALIDATE_DUMP_STRICT instead of GENL_DONT_VALIDATE_DUMP.

Fixes: ee85da53 ("devlink: have genetlink code to parse the attrs during dumpit"
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements for -next

Improvements for -next. More info in commit logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC4+ cores support Layer 3 and Layer 4 filtering. Add the
corresponding callbacks in these cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add two new tests for VLAN Perfect Filtering. While at it, increase a
little bit the tests strings lenght so that we can have more descriptive
test names.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If VLAN Hash Filtering is not available we can fallback to perfect
filtering instead. Let's implement this in XGMAC and GMAC cores and let
the user use this filter.

VLAN VID=0 always passes filter so we check if more than 2 VLANs are
created and return proper error code if so because perfect filtering
only supports 1 VID at a time.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix build error:

net/rds/ib_cm.c: In function rds_dma_hdrs_alloc:
net/rds/ib_cm.c:475:13: error: implicit declaration of function dma_pool_zalloc; did you mean mempool_alloc? [-Werror=implicit-function-declaration]
   hdrs[i] = dma_pool_zalloc(pool, GFP_KERNEL, &hdr_daddrs[i]);
             ^~~~~~~~~~~~~~~
             mempool_alloc

net/rds/ib.c: In function rds_ib_dev_free:
net/rds/ib.c:111:3: error: implicit declaration of function dma_pool_destroy; did you mean mempool_destroy? [-Werror=implicit-function-declaration]
   dma_pool_destroy(rds_ibdev->rid_hdrs_pool);
   ^~~~~~~~~~~~~~~~
   mempool_destroy
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 9b17f588 ("net/rds: Use DMA memory pool allocation for rds_header")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Query number of modules from firmware

Vadim says:

The patchset adds support for a new field "num_of_modules" of Management
General Peripheral Information Register (MGPIR), providing the maximum
number of QSFP modules, which can be supported by the system.

It allows to obtain the number of QSFP modules directly from this field,
as a static data, instead of old method of getting this info through
"network port to QSFP module" mapping. With the old method, in case of
port dynamic re-configuration some modules can logically "disappear" as
a result of port split operations, which can cause some modules to
appear missing.

Such scenario can happen on a system equipped with a BMC card, while PCI
chip driver at host CPU side can perform some ports "split" or "unsplit"
operations, while BMC side I2C chip driver reads the "port-to-module"
mapping.

Add common API for FW "minor" and "subminor" versions validation and
share it between PCI and I2C based drivers.

Add FW version validation for "minimal" driver, because use of new field
"num_of_modules" in MGPIR register is not backward compatible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add validation for FW version in order to prevent driver initialization
in case FW version is older than expected. FW version validation is
necessary, because use of a new field 'num_of_modules' in MGPIR register
is not backward compatible. FW 'minor' and 'subminor' versions are
expected to be greater than or equal to 2000 and 1886, respectively.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new API for FW "minor" and "subminor" version validation for
sharing it between "spectrum" and "minimal" drivers.
Use it in "spectrum" driver.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use new field "num_of_modules" of MGPIR register for "thermal" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use new field "num_of_modules" of MGPIR register for "hwmon" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.

Reading this info through MGPIR register is faster and does not depend
on possible dynamic re-configuration of ports.
In case of port dynamic re-configuration some modules can logically
"disappear" as a result of port split and un-spilt operations, which
can cause missing of some modules, in case this info is taken from port
to module mapping info.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend MGPIR - Management General Peripheral Information Register
with new field "num_of_modules" exposing the number of modules
supported by specific system.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
netdevsim: allow to test reload failures

Allow user to test devlink reload failures: Fail to reload and fail
during reload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend netdevsim reload test by simulation of failures.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add flag to disallow reload and another one that causes reload to
always fail.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: genetlink: parse attrs for dumpit() callback

In generic netlink, parsing attributes for doit() callback is already
implemented. They are available in info->attrs.

For dumpit() however, each user which is interested in attributes have to
parse it manually. Even though the attributes may be (depending on flag)
already validated (by parse function).

Make usage of attributes in dumpit() more convenient and prepare
info->attrs too.

Patchset also make the existing users of genl_family_attrbuf() converted
to use info->attrs and removes the helper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

genl_family_attrbuf() function is no longer used by anyone, so remove it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As this is the last user of genl_family_attrbuf, convert to allocate
attrs locally and do it in a similar way this is done in compat_doit().
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the dumpit info struct for attrs. Instead of existing attribute
validation do parse them and save in the info struct. Caller can benefit
from this and does not have to do parse itself. In order to properly
free attrs, genl_family pointer needs to be added to dumpit info struct
as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To be re-usable by dumpit as well, push the code that is taking care of
attrbuf allocation and parting from doit into separate function.
Introduce a helper to free the buffer too.

Check family->maxattr too before calling kfree() to be symmetrical with
the allocation check.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the cb->data is taken by ops during non-parallel dumping.
Introduce a new structure genl_dumpit_info and store the ops there.
Distribute the info to both non-parallel and parallel dumping. Also add
a helper genl_dumpit_info() to easily get the info structure in the
dumpit callback from cb.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the function genl_family_rcv_msg() is quite big. Since it is
quite convenient, push code that is related to doit and dumpit ops into
separate functions.

Do small changes on the way, like rc/err unification, NULL check etc.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows to attach conntrack helper to a confirmed conntrack
entry.  Currently, we can only attach alg helper to a conntrack entry
when it is in the unconfirmed state.  This patch enables an use case
that we can firstly commit a conntrack entry after it passed some
initial conditions.  After that the processing pipeline will further
check a couple of packets to determine if the connection belongs to
a particular application, and attach alg helper to the connection
in a later stage.
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
create netdevsim instances in namespace

Allow user to create netdevsim devlink and netdevice instances in a
network namespace according to the namespace where the user resides in.
Add a selftest to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test that creates netdevsim instance inside network namespace
and verifies that the related devlink instance and port netdevices
reside in the namespace.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When user does create new netdevsim instance using sysfs bus file,
create the devlink instance and related netdev instance in the namespace
of the caller.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For newly allocated devlink instance allow drivers to set net struct
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: add ctrl path tracing and statistics

This set adds trace events related to TLS offload and basic MIB stats
for TLS.

First patch contains the TLS offload related trace points. Those are
helpful in troubleshooting offload issues, especially around the
resync paths.

Second patch adds a tracepoint to the fastpath of device offload,
it's separated out in case there will be objections to adding
fast path tracepoints. Again, it's quite useful for debugging
offload issues.

Next four patches add MIB statistics. The statistics are implemented
as per-cpu per-netns counters. Since there are currently no fast path
statistics we could move to atomic variables. Per-CPU seem more common.

Most basic statistics are number of created and live sessions, broken
out to offloaded and non-offloaded. Users seem to like those a lot.

Next there is a statistic for decryption errors. These are primarily
useful for device offload debug, in normal deployments decryption
errors should not be common.

Last but not least a counter for device RX resync.
====================
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a statistic for number of RX resyncs sent down to the NIC.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>