1. 29 Mar, 2019 5 commits
  2. 28 Mar, 2019 5 commits
    • David Howells's avatar
      afs: Fix StoreData op marshalling · 8c7ae38d
      David Howells authored
      The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
      generated by ->setattr() ops for the purpose of expanding a file is
      incorrect due to older documentation incorrectly describing the way the RPC
      'FileLength' parameter is meant to work.
      
      The older documentation says that this is the length the file is meant to
      end up at the end of the operation; however, it was never implemented this
      way in any of the servers, but rather the file is truncated down to this
      before the write operation is effected, and never expanded to it (and,
      indeed, it was renamed to 'TruncPos' in 2014).
      
      Fix this by setting the position parameter to the new file length and doing
      a zero-lengh write there.
      
      The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
      it then mmaps.  This can be tested by giving the following test program a
      filename in an AFS directory:
      
      	#include <stdio.h>
      	#include <stdlib.h>
      	#include <unistd.h>
      	#include <fcntl.h>
      	#include <sys/mman.h>
      	int main(int argc, char *argv[])
      	{
      		char *p;
      		int fd;
      		if (argc != 2) {
      			fprintf(stderr,
      				"Format: test-trunc-mmap <file>\n");
      			exit(2);
      		}
      		fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
      		if (fd < 0) {
      			perror(argv[1]);
      			exit(1);
      		}
      		if (ftruncate(fd, 0x140008) == -1) {
      			perror("ftruncate");
      			exit(1);
      		}
      		p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
      			 MAP_SHARED, fd, 0);
      		if (p == MAP_FAILED) {
      			perror("mmap");
      			exit(1);
      		}
      		p[0] = 'a';
      		if (munmap(p, 4096) < 0) {
      			perror("munmap");
      			exit(1);
      		}
      		if (close(fd) < 0) {
      			perror("close");
      			exit(1);
      		}
      		exit(0);
      	}
      
      Fixes: 31143d5d ("AFS: implement basic file write support")
      Reported-by: default avatarJonathan Billings <jsbillin@umich.edu>
      Tested-by: default avatarJonathan Billings <jsbillin@umich.edu>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8c7ae38d
    • David Howells's avatar
      vfs: Update mount API docs · 7d6ab823
      David Howells authored
      Update the mount API docs to reflect recent changes to the code.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7d6ab823
    • Linus Torvalds's avatar
      Merge tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · bfed6d0f
      Linus Torvalds authored
      Pull s390 fixes from Martin Schwidefsky:
       "Improvements and bug fixes for 5.1-rc2:
      
         - Fix early free of the channel program in vfio
      
         - On AP device removal make sure that all messages are flushed with
           the driver still attached that queued the message
      
         - Limit brk randomization to 32MB to reduce the chance that the heap
           of ld.so is placed after the main stack
      
         - Add a rolling average for the steal time of a CPU, this will be
           needed for KVM to decide when to do busy waiting
      
         - Fix a warning in the CPU-MF code
      
         - Add a notification handler for AP configuration change to react
           faster to new AP devices"
      
      * tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
        s390/cpumf: Fix warning from check_processor_id
        zcrypt: handle AP Info notification from CHSC SEI command
        vfio: ccw: only free cp on final interrupt
        s390/vtime: steal time exponential moving average
        s390/zcrypt: revisit ap device remove procedure
        s390: limit brk randomization to 32MB
      bfed6d0f
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · 97c41a6b
      Linus Torvalds authored
      Pull ARM SoC fixes from Arnd Bergmann:
       "A couple of minor fixes only for now
      
         - fix for incorrect DMA channels on Renesas R-Car
      
         - Broadcom bcm2835 error handling fixes
      
         - Kconfig dependency fixes for bcm2835 and davinci
      
         - CPU idle wakeup fix for i.MX6
      
         - MMC regression on Tegra186
      
         - fix incorrect phy settings on one imx board"
      
      * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
        arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
        ARM: dts: nomadik: Fix polarity of SPI CS
        ARM: davinci: fix build failure with allnoconfig
        ARM: imx_v4_v5_defconfig: enable PWM driver
        ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
        ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
        ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
        ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
        ARM: dts: pfla02: increase phy reset duration
        ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
        ARM: imx51: fix a leaked reference by adding missing of_node_put
        ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
        arm64: bcm2835: Add missing dependency on MFD_CORE.
        ARM: dts: bcm283x: Fix hdmi hpd gpio pull
        soc: bcm: bcm2835-pm: Fix error paths of initialization.
        soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
        arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
        arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
      97c41a6b
    • Thomas Richter's avatar
      s390/cpumf: Fix warning from check_processor_id · b6ffdf27
      Thomas Richter authored
      Function __hw_perf_event_init() used a CPU variable without
      ensuring CPU preemption has been disabled. This caused the
      following warning in the kernel log:
      
        [ 7.277085] BUG: using smp_processor_id() in preemptible
                       [00000000] code: cf-csdiag/1892
        [ 7.277111] caller is cf_diag_event_init+0x13a/0x338
        [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
                       5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
        [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
        [ 7.277139] Call Trace:
        [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
        [ 7.277161]  [<0000000000b7a71a>] dump_stack+0x92/0xd0
        [ 7.277174]  [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
        [ 7.277183]  [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
        [ 7.277195]  [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
        [ 7.277204]  [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
        [ 7.277214]  [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
        [ 7.277224]  [<0000000000b9e8f0>] system_call+0xdc/0x2d8
        [ 7.277233] 2 locks held by cf-csdiag/1892:
        [ 7.277241]  #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
                        at: __s390x_sys_perf_event_open+0xd2e/0xd50
        [ 7.277257]  #1: 00000000363b11bd (&pmus_srcu){....},
                        at: perf_event_alloc+0x52e/0xce0
      
      The variable is now accessed in proper context. Use
      get_cpu_var()/put_cpu_var() pair to disable
      preemption during access.
      As the hardware authorization settings apply to all CPUs, it
      does not matter which CPU is used to check the authorization setting.
      
      Remove the event->count assignment. It is not needed as function
      perf_event_alloc() allocates memory for the event with kzalloc() and
      thus count is already set to zero.
      
      Fixes: fe5908bc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
      Signed-off-by: default avatarThomas Richter <tmricht@linux.ibm.com>
      Reviewed-by: default avatarHendrik Brueckner <brueckner@linux.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      b6ffdf27
  3. 27 Mar, 2019 1 commit
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 1a9df9e2
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Fixes here and there, a couple new device IDs, as usual:
      
         1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
      
         2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
      
         3) Fix documentation for some eBPF helpers, from Quentin Monnet.
      
         4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
      
         5) Set descriptor ownership bit at the right time for jumbo frames in
            stmmac driver, from Aaro Koskinen.
      
         6) Set IFF_UP properly in tun driver, from Eric Dumazet.
      
         7) Fix load/store doubleword instruction generation in powerpc eBPF
            JIT, from Naveen N. Rao.
      
         8) nla_nest_start() return value checks all over, from Kangjie Lu.
      
         9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
            merge window. From Marcelo Ricardo Leitner and Xin Long.
      
        10) Fix memory corruption with large MTUs in stmmac, from Aaro
            Koskinen.
      
        11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
            Dumazet.
      
        12) Fix topology subscription cancellation in tipc, from Erik Hugne.
      
        13) Memory leak in genetlink error path, from Yue Haibing.
      
        14) Valid control actions properly in packet scheduler, from Davide
            Caratti.
      
        15) Even if we get EEXIST, we still need to rehash if a shrink was
            delayed. From Herbert Xu.
      
        16) Fix interrupt mask handling in interrupt handler of r8169, from
            Heiner Kallweit.
      
        17) Fix leak in ehea driver, from Wen Yang"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
        dpaa2-eth: fix race condition with bql frame accounting
        chelsio: use BUG() instead of BUG_ON(1)
        net: devlink: skip info_get op call if it is not defined in dumpit
        net: phy: bcm54xx: Encode link speed and activity into LEDs
        tipc: change to check tipc_own_id to return in tipc_net_stop
        net: usb: aqc111: Extend HWID table by QNAP device
        net: sched: Kconfig: update reference link for PIE
        net: dsa: qca8k: extend slave-bus implementations
        net: dsa: qca8k: remove leftover phy accessors
        dt-bindings: net: dsa: qca8k: support internal mdio-bus
        dt-bindings: net: dsa: qca8k: fix example
        net: phy: don't clear BMCR in genphy_soft_reset
        bpf, libbpf: clarify bump in libbpf version info
        bpf, libbpf: fix version info and add it to shared object
        rxrpc: avoid clang -Wuninitialized warning
        tipc: tipc clang warning
        net: sched: fix cleanup NULL pointer exception in act_mirr
        r8169: fix cable re-plugging issue
        net: ethernet: ti: fix possible object reference leak
        net: ibm: fix possible object reference leak
        ...
      1a9df9e2
  4. 26 Mar, 2019 20 commits
  5. 25 Mar, 2019 9 commits
    • Linus Torvalds's avatar
      Revert "parport: daisy: use new parport device model" · a3ac7917
      Linus Torvalds authored
      This reverts commit 1aec4211.
      
      Steven Rostedt reports that it causes a hang at bootup and bisected it
      to this commit.
      
      The troigger is apparently a module alias for "parport_lowlevel" that
      points to "parport_pc", which causes a hang with
      
          modprobe -q -- parport_lowlevel
      
      blocking forever with a backtrace like this:
      
          wait_for_completion_killable+0x1c/0x28
          call_usermodehelper_exec+0xa7/0x108
          __request_module+0x351/0x3d8
          get_lowlevel_driver+0x28/0x41 [parport]
          __parport_register_driver+0x39/0x1f4 [parport]
          daisy_drv_init+0x31/0x4f [parport]
          parport_bus_init+0x5d/0x7b [parport]
          parport_default_proc_register+0x26/0x1000 [parport]
          do_one_initcall+0xc2/0x1e0
          do_init_module+0x50/0x1d4
          load_module+0x1c2e/0x21b3
          sys_init_module+0xef/0x117
      
      Supid says:
       "Due to the new device model daisy driver will now try to find the
        parallel ports while trying to register its driver so that it can bind
        with them. Now, since daisy driver is loaded while parport bus is
        initialising the list of parport is still empty and it tries to load
        the lowlevel driver, which has an alias set to parport_pc, now causes
        a deadlock"
      
      But I don't think the daisy driver should be loaded by the parport
      initialization in the first place, so let's revert the whole change.
      
      If the daisy driver can just initialize separately on its own (like a
      driver should), instead of hooking into the parport init sequence
      directly, this issue probably would go away.
      Reported-and-bisected-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      Reported-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a3ac7917
    • Jonathan Hunter's avatar
      arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186 · 93958742
      Jonathan Hunter authored
      Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
      that is causing accesses to the file-system on the eMMC to fail. Errors
      such as the following have been observed ...
      
       mmc2: running CQE recovery
       mmc2: mmc_select_hs400 failed, error -110
       print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
       mmc2: cqhci: CQE failed to exit halt state
      
      For now disable CQE support for Tegra186 until this issue is resolved.
      
      Fixes: dfd3cb6f arm64: tegra: Add CQE Support for SDMMC4
      Signed-off-by: default avatarJonathan Hunter <jonathanh@nvidia.com>
      Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      93958742
    • Arnd Bergmann's avatar
      Merge tag 'imx-fixes-5.1' of... · 2e8c54db
      Arnd Bergmann authored
      Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
      
      i.MX fixes for 5.1:
       - Correct phy mode setting of imx6dl-yapp4 board to fix a problem
         caused by commit 5ecdd77c ("net: dsa: qca8k: disable delay
         for RGMII mode").
       - Add a missing of_node_put call to fix leaked reference detected by
         coccinelle in imx51 machine code.
       - Fix imx6q cpuidle driver bug which causes that CPU might not wake up
         at expected time.
       - Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
         transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
       - Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
       - Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
       - Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
       - Update PWM driver options in imx defconfig files due to the change
         on driver part.
      
      * tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
        ARM: imx_v4_v5_defconfig: enable PWM driver
        ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
        ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
        ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
        ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
        ARM: dts: pfla02: increase phy reset duration
        ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
        ARM: imx51: fix a leaked reference by adding missing of_node_put
        ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
      2e8c54db
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes · 0cee41d4
      Arnd Bergmann authored
      This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
      please pull the following:
      
      - Eric provides fixes for the bcm2835-pm driver: added missing depends
        on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
        paths on initialization and fixing the PM_IMAGE_PERI power domain
      
      * tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
        arm64: bcm2835: Add missing dependency on MFD_CORE.
        soc: bcm: bcm2835-pm: Fix error paths of initialization.
        soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
      0cee41d4
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes · 274a8ddc
      Arnd Bergmann authored
      This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
      5.1, please pull the following:
      
      - Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
        model B revision 2
      
      * tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
        ARM: dts: bcm283x: Fix hdmi hpd gpio pull
      274a8ddc
    • Linus Walleij's avatar
      ARM: dts: nomadik: Fix polarity of SPI CS · fa946356
      Linus Walleij authored
      The SPI DT bindings are for historical reasons a pitfall,
      the ability to flag a GPIO line as active high/low with
      the second cell flags was introduced later so the SPI
      subsystem will only accept the bool flag spi-cs-high
      to indicate that the line is active high.
      
      It worked by mistake, but the mistake was corrected
      in another commit.
      
      The comment in the DTS file was also misleading: this
      CS is indeed active high.
      
      Fixes: cffbb02d ("ARM: dts: nomadik: Augment NHK15 panel setting")
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      fa946356
    • Arnd Bergmann's avatar
      Merge tag 'renesas-fixes-for-v5.1' of... · 44cd9050
      Arnd Bergmann authored
      Merge tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes
      
      Renesas ARM Based SoC Fixes for v5.1
      
      R-Car Gen3 E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs:
      * Correct SCIF5 DMA channels
      
      * tag 'renesas-fixes-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
        arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
      44cd9050
    • Sekhar Nori's avatar
      ARM: davinci: fix build failure with allnoconfig · 2dbed152
      Sekhar Nori authored
      allnoconfig build with just ARCH_DAVINCI enabled
      fails because drivers/clk/davinci/* depends on
      REGMAP being enabled.
      
      Fix it by selecting REGMAP_MMIO when building in
      DaVinci support.
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Reviewed-by: default avatarDavid Lechner <david@lechnology.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      2dbed152
    • Jeff Layton's avatar
      locks: wake any locks blocked on request before deadlock check · 945ab8f6
      Jeff Layton authored
      Andreas reported that he was seeing the tdbtorture test fail in some
      cases with -EDEADLCK when it wasn't before. Some debugging showed that
      deadlock detection was sometimes discovering the caller's lock request
      itself in a dependency chain.
      
      While we remove the request from the blocked_lock_hash prior to
      reattempting to acquire it, any locks that are blocked on that request
      will still be present in the hash and will still have their fl_blocker
      pointer set to the current request.
      
      This causes posix_locks_deadlock to find a deadlock dependency chain
      when it shouldn't, as a lock request cannot block itself.
      
      We are going to end up waking all of those blocked locks anyway when we
      go to reinsert the request back into the blocked_lock_hash, so just do
      it prior to checking for deadlocks. This ensures that any lock blocked
      on the current request will no longer be part of any blocked request
      chain.
      
      URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
      Fixes: 5946c431 ("fs/locks: allow a lock request to block other requests.")
      Cc: stable@vger.kernel.org
      Reported-by: default avatarAndreas Schneider <asn@redhat.com>
      Signed-off-by: default avatarNeil Brown <neilb@suse.com>
      Signed-off-by: default avatarJeff Layton <jlayton@kernel.org>
      945ab8f6