AT91 SoC for 5.20

It contains updates for integration with OP-TEE by having a
dummy outer_cache.write_sec function to avoid triggering
exception when Linux tries to update secure registers.

* tag 'at91-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: setup outer cache .write_sec() callback if needed
  ARM: at91: add sam_linux_is_optee_available() function

Link: https://lore.kernel.org/r/20220721085852.1740924-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

When running under OP-TEE, the L2 cache is configured by OP-TEE and the
sam platform code does not allow any modification yet. Setup a dummy
.write_sec() callback to avoid triggering exceptions when Linux tries
to modify the L2 cache configuration.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[claudiu.beznea: keep .init_early populated only for SAMA5D2, remove
 sam_secure_init() from sama5d2_init() as it is also called in
 sama5_secure_cache_init()]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220606145701.185552-3-clement.leger@bootlin.com

Add sam_linux_is_optee_available() which allows to know if OP-TEE is
available for Linux. This function is used by code which needs to
know if we running with OP-TEE available or not.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[claudiu.beznea: edit commit title and message, renamed
 sam_linux_is_in_normal_world() into sam_linux_is_optee_available()]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220606145701.185552-2-clement.leger@bootlin.com

Merge tag 'mvebu-arm-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/soc

mvebu arm for 5.20 (part 1)

Update PCIe fixup for old Marvell SoCs: dove, orion5 and mv78xx0.

* tag 'mvebu-arm-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: Marvell: Update PCIe fixup

Link: https://lore.kernel.org/r/87ilntqn0v.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

- The code relies on rc_pci_fixup being called, which only happens
  when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting
  this causes a booting failure with a non-obvious cause.
- Update rc_pci_fixup to set the class properly, copying the
  more modern style from other places
- Correct the rc_pci_fixup comment

This patch just re-applies commit 1dc831bf ("ARM: Kirkwood: Update
PCI-E fixup") for all other Marvell ARM platforms which have same buggy
PCIe controller and do not use pci-mvebu.c controller driver yet.

Long-term goal for these Marvell ARM platforms should be conversion to
pci-mvebu.c controller driver and removal of these fixups in arch code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

This pull request contains Broadcom ARM-based SoCs Kconfig updates for
5.20, second part, please pull the following:

- Rafal spells out what the BCA acronym means

- Florian removes the forced thermal subsystem selection done by
  ARCH_BCM_NSP

* tag 'arm-soc/for-5.20/soc-part2' of https://github.com/Broadcom/stblinux:
  ARM: bcmbca: Include full family name in Kconfig
  ARM: bcm: NSP: Removed forced thermal selection

Link: https://lore.kernel.org/r/20220715221642.297536-4-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Spell out the BCA acronym to explain where these chips are coming from.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220713162031.15392-1-zajec5@gmail.comSigned-off-by: Florian Fainelli <f.fainelli@gmail.com>

Both THERMAL and THERMAL_OF are user-selectable and we should not force
the selection of those Kconfig entries.

Link: https://lore.kernel.org/r/20220711222919.4048833-1-f.fainelli@gmail.comSigned-off-by: Florian Fainelli <f.fainelli@gmail.com>

Merge tag 'davinci-boards-delete-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into arm/soc

Delete the two DaVinci board families DM644x and DM646x.

The reason why I'm pushing for this is that I have floated
patches to update the board files to use GPIO descriptors,
iterated and fixed bugs in the patches reported by reviewers
and build robots, and then the patches have not been merged.
See:

v6:
https://lore.kernel.org/linux-arm-kernel/20201103000158.325147-1-linus.walleij@linaro.org/
https://lore.kernel.org/linux-arm-kernel/20210715191141.430307-3-linus.walleij@linaro.org/

v7:
https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-1-linus.walleij@linaro.org/
https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-2-linus.walleij@linaro.org/

I assume this is not getting merged because of lack of interest
in the platform, and such things happen. To save myself and
others from spending work hours on maintaining and modernizing
a platform that is not used, delete the board files.

* tag 'davinci-boards-delete-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  ARM: davinci: Delete DM646x board files
  ARM: davinci: Delete DM644x board files
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC update for 5.20:

- Update the mx25_read_cpu_rev() function to support silicon revision 1.2
  for i.MX25 SoC.
- A minor indentation fix in Kconfig file.

* tag 'imx-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx25: support silicon revision 1.2
  ARM: imx: Kconfig: Fix indentation

Link: https://lore.kernel.org/r/20220709082951.15123-2-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM-SoC MAINTAINERS file updates for
5.20, please pull the following:

- William and Anand updates the MAINTAINERS files with new BCA SoCs
  entries for a variety of PON/DSL SoCs: 63178, 63158, 4912, 6858, 6878,
  6846, 6855, 6756, 63146, 6856, 63148, 6813. 63138 is now listed as a
  supported BCA platform and joins the families just added.

* tag 'arm-soc/for-5.20/maintainers' of https://github.com/Broadcom/stblinux:
  MAINTAINERS: Move BCM63138 to bcmbca arch entry
  MAINTAINERS: Add BCM6813 to bcmbca arch entry
  MAINTAINERS: Add BCM63148 to bcmbca arch entry
  MAINTAINERS: Add BCM6856 to bcmbca arch entry
  MAINTAINERS: Add BCM63146 to bcmbca arch entry
  MAINTAINERS: Add BCM6756 to bcmbca arch entry
  MAINTAINERS: Add BCM6855 to bcmbca arch entry
  MAINTAINERS: Add BCM6846 to bcmbca arch entry
  MAINTAINERS: Add BCM6878 to bcmbca arch entry
  MAINTAINERS: Add BCM6858 to bcmbca arch entry
  MAINTAINERS: Add BCM4912 to bcmbca arch entry
  MAINTAINERS: Add BCM63158 to bcmbca arch entry
  MAINTAINERS: Add BCM63178 to bcmbca arch entry

Link: https://lore.kernel.org/r/20220711164451.3542127-7-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom SoC drivers changes for 5.20, please
pull the following:

- Miaoqian fixes a device_node reference count leak in the Kona SMC
  initialization code

- William moves the 63138 support code to use CONFIG_ARCH_BCMBCA which
  is how all of those similar SoCs from the BCA division are supported
  moving forward. This includes machine code and UART low-level debug
  code.

* tag 'arm-soc/for-5.20/soc' of https://github.com/Broadcom/stblinux:
  ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  arm: bcmbca: Add BCMBCA sub platforms
  arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA
  ARM: bcm: Fix refcount leak in bcm_kona_smc_init

Link: https://lore.kernel.org/r/20220711164451.3542127-8-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
DEBUG_BCM63XX_UART depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Create new CORTEXA7, CORTEXA9 and BRAHMAB15 BCMBCA sub platform configs to
enable fine-grained selection for each type of ARMv7 SoC.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Remove ARCH_BCM_63XX Kconfig for BCM63138 and merge its selections to
ARCH_BCMBCA. Delete bcm63xx.c as it is no longer needed.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Move BCM63138 related files to BCMBCA ARCH maintainer list entry and delete
the BCM63XX ARM ARCHITECTURE entry
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Merge tag 'renesas-arm-soc-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc

Renesas ARM SoC updates for v5.20

  - Fix of_node reference counting in the R-Car Gen2 board quirk.

* tag 'renesas-arm-soc-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: rcar-gen2: Increase refcount for new reference

Link: https://lore.kernel.org/r/cover.1657278849.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: Zynq SoC changes for v5.20

- Fix refcount leak in zynq_get_revision()

* tag 'zynq-soc-for-v5.20' of https://github.com/Xilinx/linux-xlnx:
  cpufreq: zynq: Fix refcount leak in zynq_get_revision

Link: https://lore.kernel.org/r/e1d0a721-afa4-93a0-7119-0e4481a0624b@monstr.euSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: ZynqMP SoC changes for v5.20

- Register SGI separately out of EEMI

* tag 'zynqmp-soc-for-v5.20' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call

Link: https://lore.kernel.org/r/0196d1f3-e9c7-ef51-143d-e98b14980f63@monstr.euSigned-off-by: Arnd Bergmann <arnd@arndb.de>

In rcar_gen2_regulator_quirk(), for_each_matching_node_and_match() will
automatically increase and decrease the refcount.  However, we should
call of_node_get() for the new reference created in 'quirk->np'.
Besides, we also should call of_node_put() before the 'quirk' being
freed.
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220701121804.234223-1-windhl@126.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'omap-for-v5.20/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

SoC changes omaps for v5.20 merge window

SoC changes omaps mostly for missing of_node_put() calls and cosmetic
Kconfig changes. These can be all merged when suitable, there is no urgent
need to merge this as fixes.

* tag 'omap-for-v5.20/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Kconfig: Fix indentation
  ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
  ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
  ARM: OMAP2+: display: Fix refcount leak bug
  ARM: OMAP2+: Fix refcount leak in omapdss_init_of

Link: https://lore.kernel.org/r/pull-1656918583-2801@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.20

1. Use preferred strscpy() over strlcpy().
2. Kconfig indentation cleanup.

* tag 'samsung-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c: Kconfig.s3c64xx: Fix indentation
  ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
  ARM: s3c: Kconfig: Fix indentation
  ARM: s3c: Use strscpy to replace strlcpy

Link: https://lore.kernel.org/r/20220624080746.31947-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The interest of maintaining the DaVinci DM644x board files seems
very low. Patches to convert the EVM board to use GPIO descriptors
has not been reviewed, tested or merged for several merge
windows in a row, see link below.

When I look in the logs for the board files I see nothing but
generic kernel maintenance and no testing on real hardware for
years.

I conclude the DM646x board files are unused and can be deleted.

Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Matt Porter <mporter@konsulko.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-2-linus.walleij@linaro.org/Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The interest of maintaining the DaVinci DM644x board files seems
very low. Patches to convert the EVM board to use GPIO descriptors
has not been reviewed, tested or merged for several merge
windows in a row, see link below.

When I look in the logs for the board files I see nothing but
generic kernel maintenance and no testing on real hardware for
years.

I conclude the DM644x board files are unused and can be deleted.

Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Matt Porter <mporter@konsulko.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-1-linus.walleij@linaro.org/Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

SGI interrupt register and reset is performed by EEMI ioctl
IOCTL_REGISTER_SGI. However, this is not correct use of EEMI call.
SGI registration functionality does not qualify as energy management
activity and so shouldn't be mapped to EEMI call.

This new call will replace IOCTL_REGISTER_SGI and will  be handled by TF-A
specific handler in TF-A. To maintain backward compatibility for a while
firmware driver will still use IOCTL_REGISTER_SGI as fallback strategy if
new call fails or is not supported by TF-A.

This new design also helps to make TF-A as pass through layer for EEMI
calls. So we don't have to maintain PM_IOCTL as EEMI API ID in TF-A.
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220607224253.54919-1-tanmay.shah@xilinx.comSigned-off-by: Michal Simek <michal.simek@amd.com>

of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 00f7dc63 ("ARM: zynq: Add support for SOC_BUS")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220605082807.21526-1-linmq006@gmail.comSigned-off-by: Michal Simek <michal.simek@amd.com>

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

While at it, remove an extra tab.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Message-Id: <20220523063040.10991-1-juergh@canonical.com>
[tony@atomide.com: updated for extra tab]
Signed-off-by: Tony Lindgren <tony@atomide.com>

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 1e037794 ("ARM: OMAP3+: PRM: register interrupt information from DT")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220526073724.21169-1-linmq006@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

In pdata_quirks_init_clocks(), the loop contains
of_find_node_by_name() but without corresponding of_node_put().
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220618020603.4055792-1-windhl@126.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

In omapdss_init_fbdev(), of_find_node_by_name() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617145803.4050918-1-windhl@126.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omapdss_find_dss_of_node() calls of_find_compatible_node() to get device
node. of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() in later error path and normal path.

Fixes: e0c827ac ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220601044858.3352-1-linmq006@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

Pull hotfixes from Andrew Morton:
 "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.

  Fixes for this merge window:

   - fix for a damon boot hang, from SeongJae

   - fix for a kfence warning splat, from Jason Donenfeld

   - fix for zero-pfn pinning, from Alex Williamson

   - fix for fallocate hole punch clearing, from Mike Kravetz

  Fixes for previous releases:

   - fix for a performance regression, from Marcelo

   - fix for a hwpoisining BUG from zhenwei pi"

* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add entry for Christian Marangi
  mm/memory-failure: disable unpoison once hw error happens
  hugetlbfs: zero partial pages during fallocate hole punch
  mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
  mm: re-allow pinning of zero pfns
  mm/kfence: select random number before taking raw lock
  MAINTAINERS: add maillist information for LoongArch
  MAINTAINERS: update MM tree references
  MAINTAINERS: update Abel Vesa's email
  MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
  MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
  mailmap: add alias for jarkko@profian.com
  mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
  kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
  mm: lru_cache_disable: use synchronize_rcu_expedited
  mm/page_isolation.c: fix one kernel-doc comment

Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Enable ignore_missing_thread in 'perf stat', enabling counting with
   '--pid' when threads disappear during counting session setup

 - Adjust output data offset for backward compatibility in 'perf inject'

 - Fix missing free in copy_kcore_dir() in 'perf inject'

 - Fix caching files with a wrong build ID

 - Sync drm, cpufeatures, vhost and svn headers with the kernel

* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  perf stat: Enable ignore_missing_thread
  perf inject: Adjust output data offset for backward compatibility
  perf trace beauty: Fix generation of errno id->str table on ALT Linux
  perf build-id: Fix caching files with a wrong build ID
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf inject: Fix missing free in copy_kcore_dir()

Pull btrfs fixes from David Sterba:

 - zoned relocation fixes:
      - fix critical section end for extent writeback, this could lead
        to out of order write
      - prevent writing to previous data relocation block group if space
        gets low

 - reflink fixes:
      - fix race between reflinking and ordered extent completion
      - proper error handling when block reserve migration fails
      - add missing inode iversion/mtime/ctime updates on each iteration
        when replacing extents

 - fix deadlock when running fsync/fiemap/commit at the same time

 - fix false-positive KCSAN report regarding pid tracking for read locks
   and data race

 - minor documentation update and link to new site

* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Documentation: update btrfs list of features and link to readthedocs.io
  btrfs: fix deadlock with fsync+fiemap+transaction commit
  btrfs: don't set lock_owner when locking extent buffer for reading
  btrfs: zoned: fix critical section of relocation inode writeback
  btrfs: zoned: prevent allocation from previous data relocation BG
  btrfs: do not BUG_ON() on failure to migrate space when replacing extents
  btrfs: add missing inode updates on each iteration when replacing extents
  btrfs: fix race between reflinking and ordered extent completion

Pull dma-mapping fix from Christoph Hellwig:

 - pass the correct size to dma_set_encrypted() when freeing memory
   (Dexuan Cui)

* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: use the correct size for dma_set_encrypted()

Pull fbdev fixes from Helge Deller:
 "Two bug fixes for the pxa3xx and intelfb drivers:

   - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

   - intelfb: Initialize value of stolen size

  The other changes are small cleanups, simplifications and
  documentation updates to the cirrusfb, skeletonfb, omapfb,
  intelfb, au1100fb and simplefb drivers"

* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Remove duplicate 'the' in comment
  video: fbdev: omapfb: Align '*' in comment
  video: fbdev: simplefb: Check before clk_put() not needed
  video: fbdev: au1100fb: Drop unnecessary NULL ptr check
  video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
  video: fbdev: skeletonfb: Convert to generic power management
  video: fbdev: cirrusfb: Remove useless reference to PCI power management
  video: fbdev: intelfb: Initialize value of stolen size
  video: fbdev: intelfb: Use aperture size from pci_resource_len
  video: fbdev: skeletonfb: Fix syntax errors in comments

Pull parisc architecture fixes from Helge Deller:

 - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
   machines

 - flush all mappings of a shared anonymous page on PA8800/8900 machines
   via flushing the whole data cache. This may slow down such machines
   but makes sure that the cache is consistent

 - Fix duplicate definition build error regarding fb_is_primary_device()

* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
  parisc: Fix flush_anon_page on PA8800/PA8900
  parisc: align '*' in comment in math-emu code
  parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI

Pull xtensa fixes from Max Filippov:

 - fix OF reference leaks in xtensa arch code

 - replace '.bss' with '.section .bss' to fix entry.S build with old
   assembler

* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: change '.bss' to '.section .bss'
  xtensa: xtfpga: Fix refcount leak bug in setup
  xtensa: Fix refcount leak bug in time.c