- 20 Aug, 2024 8 commits
-
-
Paolo Abeni authored
Nikolay Aleksandrov says: ==================== bonding: fix xfrm offload bugs I noticed these problems while reviewing a bond xfrm patch recently. The fixes are straight-forward, please review carefully the last one because it has side-effects. This set has passed bond's selftests and my custom bond stress tests which crash without these fixes. Note the first patch is not critical, but it simplifies the next fix. ==================== Link: https://patch.msgid.link/20240816114813.326645-1-razor@blackwall.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Nikolay Aleksandrov authored
If the active slave is cleared manually the xfrm state is not flushed. This leads to xfrm add/del imbalance and adding the same state multiple times. For example when the device cannot handle anymore states we get: [ 1169.884811] bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA because it's filled with the same state after multiple active slave clearings. This change also has a few nice side effects: user-space gets a notification for the change, the old device gets its mac address and promisc/mcast adjusted properly. Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Signed-off-by:
-
Nikolay Aleksandrov authored
We must check if there is an active slave before dereferencing the pointer. Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Fix the return type which should be bool. Fixes: 955b785e ("bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()") Signed-off-by:
-
Thomas Bogendoerfer authored
GRO code checks for matching layer 2 headers to see, if packet belongs to the same flow and because ip6 tunnel set dev->hard_header_len this check fails in cases, where it shouldn't. To fix this don't set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c does. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.deSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor fs/splice.c:1207 [inline] do_splice_direct+0x1e4/0x304 fs/splice.c:1233 do_sendfile+0x460/0xb3c fs/read_write.c:1295 __do_sys_sendfile64 fs/read_write.c:1362 [inline] __se_sys_sendfile64 fs/read_write.c:1348 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1348 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Freed by task 6167: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_free_info+0x5c/0x74 mm/kasan/generic.c:640 poison_slab_object+0x124/0x18c mm/kasan/common.c:241 __kasan_slab_free+0x3c/0x78 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kmem_cache_free+0x15c/0x3d4 mm/slub.c:4363 kfree_skbmem+0x10c/0x19c __kfree_skb net/core/skbuff.c:1109 [inline] kfree_skb_reason+0x240/0x6f4 net/core/skbuff.c:1144 kfree_skb include/linux/skbuff.h:1244 [inline] kcm_release+0x104/0x4c8 net/kcm/kcmsock.c:1685 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 The buggy address belongs to the object at ffff0000ced0fc80 which belongs to the cache skbuff_head_cache of size 240 The buggy address is located 0 bytes inside of freed 240-byte region [ffff0000ced0fc80, ffff0000ced0fd70) The buggy address belongs to the physical page: page:00000000d35f4ae4 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10ed0f flags: 0x5ffc00000000800(slab|node=0|zone=2|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 05ffc00000000800 ffff0000c1cbf640 fffffdffc3423100 dead000000000004 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0000ced0fb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0000ced0fc00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff0000ced0fc80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0000ced0fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff0000ced0fd80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b72d86aa5df17ce74c60 Tested-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Jeremy Kerr authored
In the MCTP route input test, we're routing one skb, then (when delivery is expected) checking the resulting routed skb. However, we're currently checking the original skb length, rather than the routed skb. Check the routed skb instead; the original will have been freed at this point. Fixes: 8892c049 ("mctp: Add route input to socket tests") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/kernel-janitors/4ad204f0-94cf-46c5-bdab-49592addf315@kili.mountain/Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240816-mctp-kunit-skb-fix-v1-1-3c367ac89c27@codeconstruct.com.auSigned-off-by:
-
- 19 Aug, 2024 4 commits
-
-
Florian Westphal authored
Its possible that two threads call tcp_sk_exit_batch() concurrently, once from the cleanup_net workqueue, once from a task that failed to clone a new netns. In the latter case, error unwinding calls the exit handlers in reverse order for the 'failed' netns. tcp_sk_exit_batch() calls tcp_twsk_purge(). Problem is that since commit b099ce26 ("net: Batch inet_twsk_purge"), this function picks up twsk in any dying netns, not just the one passed in via exit_batch list. This means that the error unwind of setup_net() can "steal" and destroy timewait sockets belonging to the exiting netns. This allows the netns exit worker to proceed to call WARN_ON_ONCE(!refcount_dec_and_test(&net->ipv4.tcp_death_row.tw_refcount)); without the expected 1 -> 0 transition, which then splats. At same time, error unwind path that is also running inet_twsk_purge() will splat as well: WARNING: .. at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 ... refcount_dec include/linux/refcount.h:351 [inline] inet_twsk_kill+0x758/0x9c0 net/ipv4/inet_timewait_sock.c:70 inet_twsk_deschedule_put net/ipv4/inet_timewait_sock.c:221 inet_twsk_purge+0x725/0x890 net/ipv4/inet_timewait_sock.c:304 tcp_sk_exit_batch+0x1c/0x170 net/ipv4/tcp_ipv4.c:3522 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 setup_net+0x714/0xb40 net/core/net_namespace.c:375 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 ... because refcount_dec() of tw_refcount unexpectedly dropped to 0. This doesn't seem like an actual bug (no tw sockets got lost and I don't see a use-after-free) but as erroneous trigger of debug check. Add a mutex to force strict ordering: the task that calls tcp_twsk_purge() blocks other task from doing final _dec_and_test before mutex-owner has removed all tw sockets of dying netns. Fixes: e9bd0cca ("tcp: Don't allocate tcp_death_row outside of struct netns_ipv4.") Reported-by: syzbot+8ea26396ff85d23a8929@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000003a5292061f5e4e19@google.com/ Link: https://lore.kernel.org/netdev/20240812140104.GA21559@breakpoint.cc/Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Reviewed-by:
-
David S. Miller authored
Hangbin Liu says: ==================== selftests: Fix udpgro failures There are 2 issues for the current udpgro test. The first one is the testing doesn't record all the failures, which may report pass but the test actually failed. e.g. https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdout The other one is after commit d7db7775 ("net: veth: do not manipulate GRO when using XDP"), there is no need to load xdp program to enable GRO on veth device. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
After commit d7db7775 ("net: veth: do not manipulate GRO when using XDP"), there is no need to load XDP program to enable GRO. On the other hand, the current test is failed due to loading the XDP program. e.g. # selftests: net: udpgro.sh # ipv4 # no GRO ok # no GRO chk cmsg ok # GRO ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720 # # failed [...] # bad GRO lookup ok # multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 # # ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 # # failed ok 1 selftests: net: udpgro.sh After fix, all the test passed. # ./udpgro.sh ipv4 no GRO ok [...] multiple GRO socks ok Fixes: d7db7775 ("net: veth: do not manipulate GRO when using XDP") Reported-by:
Yi Chen <yiche@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-53858Reviewed-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
-
Hangbin Liu authored
Currently, we only check the latest senders's exit code. If the receiver report failed, it is not recoreded. Fix it by checking the exit code of all the involved processes. Before: bad GRO lookup ok multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 failed $ echo $? 0 After: bad GRO lookup ok multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520 failed $ echo $? 1 Fixes: 3327a9c4 ("selftests: add functionals test for UDP GRO") Suggested-by:
-
- 17 Aug, 2024 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Add error handling to pair_device() - HCI: Invert LE State quirk to be opt-out rather then opt-in - hci_core: Fix LE quote calculation - SMP: Fix assumption of Central always being Initiator * tag 'for-net-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Add error handling to pair_device() Bluetooth: SMP: Fix assumption of Central always being Initiator Bluetooth: hci_core: Fix LE quote calculation Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in ==================== Link: https://patch.msgid.link/20240815171950.1082068-1-luiz.dentz@gmail.comSigned-off-by:
-
Simon Horman authored
Since commit 255c1c72 ("tc-testing: Allow test cases to be skipped") the variable test_ordinal doesn't exist in call_pre_case(). So it should not be accessed when an exception occurs. This resolves the following splat: ... During handling of the above exception, another exception occurred: Traceback (most recent call last): File ".../tdc.py", line 1028, in <module> main() File ".../tdc.py", line 1022, in main set_operation_mode(pm, parser, args, remaining) File ".../tdc.py", line 966, in set_operation_mode catresults = test_runner_serial(pm, args, alltests) File ".../tdc.py", line 642, in test_runner_serial (index, tsr) = test_runner(pm, args, alltests) File ".../tdc.py", line 536, in test_runner res = run_one_test(pm, args, index, tidx) File ".../tdc.py", line 419, in run_one_test pm.call_pre_case(tidx) File ".../tdc.py", line 146, in call_pre_case print('test_ordinal is {}'.format(test_ordinal)) NameError: name 'test_ordinal' is not defined Fixes: 255c1c72 ("tc-testing: Allow test cases to be skipped") Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.orgSigned-off-by:
-
- 16 Aug, 2024 23 commits
-
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5 misc fixes 2024-08-15 This patchset provides misc bug fixes from the team to the mlx5 driver. ==================== Link: https://patch.msgid.link/20240815071611.2211873-1-tariqt@nvidia.comSigned-off-by:
-
Patrisious Haddad authored
Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? down_read+0x75/0x94 ? __warn+0x80/0x113 ? down_read+0x75/0x94 ? report_bug+0xa4/0x11d ? handle_bug+0x35/0x8b ? exc_invalid_op+0x14/0x75 ? asm_exc_invalid_op+0x16/0x1b ? down_read+0x75/0x94 ? down_read+0xe/0x94 mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core] tx_destroy+0x1b/0xc0 [mlx5_core] tx_ft_put+0x53/0xc0 [mlx5_core] mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core] ___xfrm_state_destroy+0x10f/0x1a2 xfrm_state_gc_task+0x81/0xa9 process_one_work+0x1f1/0x3c6 worker_thread+0x53/0x3e4 ? process_one_work.cold+0x46/0x3c kthread+0x127/0x144 ? set_kthread_struct+0x60/0x52 ret_from_fork+0x22/0x2d </TASK> ---[ end trace 5ef7896144d398e1 ]--- Fixes: dfbd229a ("net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic") Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Patrisious Haddad <phaddad@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240815071611.2211873-5-tariqt@nvidia.comSigned-off-by:
-
Carolina Jubran authored
The offending commit overlooked the Multi-PF Netdev changes. Revert mlx5e_set_default_xps_cpumasks to incorporate Multi-PF Netdev changes. Fixes: bcee0937 ("net/mlx5e: Modifying channels number and updating TX queues") Signed-off-by:
Carolina Jubran <cjubran@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
The change in the fixes tag cleaned up too much: it removed the part that was releasing header pages that were posted via UMR but haven't been acknowledged yet on the ICOSQ. This patch corrects this omission by setting the bits between pi and ci to on when shutting down a queue with SHAMPO. To be consistent with the Striding RQ code, this action is done in mlx5e_free_rx_missing_descs(). Fixes: e839ac9a ("net/mlx5e: SHAMPO, Simplify header page release in teardown") Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
When SHAMPO is used, a receive queue currently almost always leaks one page on shutdown. A page has MLX5E_SHAMPO_WQ_HEADER_PER_PAGE (8) headers. These headers are tracked in the SHAMPO bitmap. Each page is released when the last header index in the group is processed. During header allocation, there can be leftovers from a page that will be used in a subsequent allocation. This is normally fine, except for the following scenario (simplified a bit): 1) Allocate N new page fragments, showing only the relevant last 4 fragments: 0: new page 1: new page 2: new page 3: new page 4: page from previous allocation 5: page from previous allocation 6: page from previous allocation 7: page from previous allocation 2) NAPI processes header indices 4-7 because they are the oldest allocated. Bit 7 will be set to 0. 3) Receive queue shutdown occurs. All the remaining bits are being iterated on to release the pages. But the page assigned to header indices 0-3 will not be freed due to what happened in step 2. This patch fixes the issue by making sure that on allocation, header fragments are always allocated in groups of MLX5E_SHAMPO_WQ_HEADER_PER_PAGE so that there is never a partial page left over between allocations. A more appropriate fix would be a refactoring of mlx5e_alloc_rx_hd_mpwqe() and mlx5e_build_shampo_hd_umr(). But this refactoring is too big for net. It will be targeted for net-next. Fixes: e839ac9a ("net/mlx5e: SHAMPO, Simplify header page release in teardown") Signed-off-by: -
David S. Miller authored
Vladimir Oltean says: ==================== VLAN fixes for Ocelot driver This is a collection of patches I've gathered over the past several months. Patches 1-6/14 are supporting patches for selftests. Patch 9/14 fixes PTP TX from a VLAN upper of a VLAN-aware bridge port when using the "ocelot-8021q" tagging protocol. Patch 7/14 is its supporting selftest. Patch 10/14 fixes the QoS class used by PTP in the same case as above. It is hard to quantify - there is no selftest. Patch 11/14 fixes potential data corruption during PTP TX in the same case as above. Again, there is no selftest. Patch 13/14 fixes RX in the same case as above - 8021q upper of a VLAN-aware bridge port, with the "ocelot-8021q" tagging protocol. Patch 12/14 is a supporting patch for this in the DSA core, and 7/14 is also its selftest. Patch 14/14 ensures that VLAN-aware bridges offloaded to Ocelot only react to the ETH_P_8021Q TPID, and treat absolutely everything else as VLAN-untagged, including ETH_P_8021AD. Patch 8/14 is the supporting selftest. ==================== Signed-off-by: -
Vladimir Oltean authored
I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0] and realized that not only is its basic VLAN classification pipeline improper for offloading vlan_protocol 802.1ad bridges, but also improper for offloading regular 802.1Q bridges already. Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by bridged ports, but this switch treats it as if it was 802.1Q-tagged with the same VID as in the 802.1ad header. This is markedly different to what the Linux bridge expects; see the "other_tpid()" function in tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh. An idea came to me that the VCAP IS1 TCAM is more powerful than I'm giving it credit for, and that it actually overwrites the classified VID before the VLAN Table lookup takes place. In other words, it can be used even to save a packet from being dropped on ingress due to VLAN membership. Add a sophisticated TCAM rule hardcoded into the driver to force the switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol 802.1Q. Regarding the lifetime of the filter: eventually the bridge will disappear, and vlan_filtering on the port will be restored to 0 for standalone mode. Then the filter will be deleted. [0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/ Fixes: 7142529f ("net: mscc: ocelot: add VLAN filtering") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
There is a major design bug with ocelot-8021q, which is that it expects more of the hardware than the hardware can actually do. The short summary of the issue is that when a port is under a VLAN-aware bridge and we use this tagging protocol, VLAN upper interfaces of this port do not see RX traffic. We use VCAP ES0 (egress rewriter) rules towards the tag_8021q CPU port to encapsulate packets with an outer tag, later stripped by software, that depends on the source user port. We do this so that packets can be identified in ocelot_rcv(). To be precise, we create rules with push_outer_tag = OCELOT_ES0_TAG and push_inner_tag = 0. With this configuration, we expect the switch to keep the inner tag configuration as found in the packet (if it was untagged on user port ingress, keep it untagged, otherwise preserve the VLAN tag unmodified as the inner tag towards the tag_8021q CPU port). But this is not what happens. Instead, table "Tagging Combinations" from the user manual suggests that when the ES0 action is "PUSH_OUTER_TAG=1 and PUSH_INNER_TAG=0", there will be "no inner tag". Experimentation further clarifies what this means. It appears that this "inner tag" which is not pushed into the packet on its egress towards the CPU is none other than the classified VLAN. When the ingress user port is standalone or under a VLAN-unaware bridge, the classified VLAN is a discardable quantity: it is a fixed value - the result of ocelot_vlan_unaware_pvid()'s configuration, and actually independent of the VID from any 802.1Q header that may be in the frame. It is actually preferable to discard the "inner tag" in this case. The problem is when the ingress port is under a VLAN-aware bridge. Then, the classified VLAN is taken from the frame's 802.1Q header, with a fallback on the bridge port's PVID. It would be very good to not discard the "inner tag" here, because if we do, we break communication with any 8021q VLAN uppers that the port might have. These have a processing path outside the bridge. There seems to be nothing else we can do except to change the configuration for VCAP ES0 rules, to actually push the inner VLAN into the frame. There are 2 options for that, first is to push a fixed value specified in the rule, and second is to push a fixed value, plus (aka arithmetic +) the classified VLAN. We choose the second option, and we select that fixed value as 0. Thus, what is pushed in the inner tag is just the classified VLAN. From there, we need to perform software untagging, in the receive path, of stuff that was untagged on the wire. Fixes: 7c83a7c5 ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by:
-
Vladimir Oltean authored
Through code analysis, I realized that the ds->untag_bridge_pvid logic is contradictory - see the newly added FIXME above the kernel-doc for dsa_software_untag_vlan_unaware_bridge(). Moreover, for the Felix driver, I need something very similar, but which is actually _not_ contradictory: untag the bridge PVID on RX, but for VLAN-aware bridges. The existing logic does it for VLAN-unaware bridges. Since I don't want to change the functionality of drivers which were supposedly properly tested with the ds->untag_bridge_pvid flag, I have introduced a new one: ds->untag_vlan_aware_bridge_pvid, and I have refactored the DSA reception code into a common path for both flags. TODO: both flags should be unified under a single ds->software_vlan_untag, which users of both current flags should set. This is not something that can be carried out right away. It needs very careful examination of all drivers which make use of this functionality, since some of them actually get this wrong in the first place. For example, commit 9130c2d3 ("net: dsa: microchip: ksz8795: Use software untagging on CPU port") uses this in a driver which has ds->configure_vlan_while_not_filtering = true. The latter mechanism has been known for many years to be broken by design: https://lore.kernel.org/netdev/CABumfLzJmXDN_W-8Z=p9KyKUVi_HhS7o_poBkeKHS2BkAiyYpw@mail.gmail.com/ and we have the situation of 2 bugs canceling each other. There is no private VLAN, and the port follows the PVID of the VLAN-unaware bridge. So, it's kinda ok for that driver to use the ds->untag_bridge_pvid mechanism, in a broken way. Signed-off-by:
-
Vladimir Oltean authored
As explained by Horatiu Vultur in commit 603ead96 ("net: sparx5: Add spinlock for frame transmission from CPU") which is for a similar hardware design, multiple CPUs can simultaneously perform injection or extraction. There are only 2 register groups for injection and 2 for extraction, and the driver only uses one of each. So we'd better serialize access using spin locks, otherwise frame corruption is possible. Note that unlike in sparx5, FDMA in ocelot does not have this issue because struct ocelot_fdma_tx_ring already contains an xmit_lock. I guess this is mostly a problem for NXP LS1028A, as that is dual core. I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka the felix DSA driver) started using register-based packet injection and extraction. Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by:
-
Vladimir Oltean authored
There are 2 distinct code paths (listed below) in the source code which set up an injection header for Ocelot(-like) switches. Code path (2) lacks the QoS class and source port being set correctly. Especially the improper QoS classification is a problem for the "ocelot-8021q" alternative DSA tagging protocol, because we support tc-taprio and each packet needs to be scheduled precisely through its time slot. This includes PTP, which is normally assigned to a traffic class other than 0, but would be sent through TC 0 nonetheless. The code paths are: (1) ocelot_xmit_common() from net/dsa/tag_ocelot.c - called only by the standard "ocelot" DSA tagging protocol which uses NPI-based injection - sets up bit fields in the tag manually to account for a small difference (destination port offset) between Ocelot and Seville. Namely, ocelot_ifh_set_dest() is omitted out of ocelot_xmit_common(), because there's also seville_ifh_set_dest(). (2) ocelot_ifh_set_basic(), called by: - ocelot_fdma_prepare_skb() for FDMA transmission of the ocelot switchdev driver - ocelot_port_xmit() -> ocelot_port_inject_frame() for register-based transmission of the ocelot switchdev driver - felix_port_deferred_xmit() -> ocelot_port_inject_frame() for the DSA tagger ocelot-8021q when it must transmit PTP frames (also through register-based injection). sets the bit fields according to its own logic. The problem is that (2) doesn't call ocelot_ifh_set_qos_class(). Copying that logic from ocelot_xmit_common() fixes that. Unfortunately, although desirable, it is not easily possible to de-duplicate code paths (1) and (2), and make net/dsa/tag_ocelot.c directly call ocelot_ifh_set_basic()), because of the ocelot/seville difference. This is the "minimal" fix with some logic duplicated (but at least more consolidated). Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: -
Vladimir Oltean authored
Problem description ------------------- On an NXP LS1028A (felix DSA driver) with the following configuration: - ocelot-8021q tagging protocol - VLAN-aware bridge (with STP) spanning at least swp0 and swp1 - 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700 - ptp4l on swp0.700 and swp1.700 we see that the ptp4l instances do not see each other's traffic, and they all go to the grand master state due to the ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition. Jumping to the conclusion for the impatient ------------------------------------------- There is a zero-day bug in the ocelot switchdev driver in the way it handles VLAN-tagged packet injection. The correct logic already exists in the source code, in function ocelot_xmit_get_vlan_info() added by commit 5ca721c5 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). But it is used only for normal NPI-based injection with the DSA "ocelot" tagging protocol. The other injection code paths (register-based and FDMA-based) roll their own wrong logic. This affects and was noticed on the DSA "ocelot-8021q" protocol because it uses register-based injection. By moving ocelot_xmit_get_vlan_info() to a place that's common for both the DSA tagger and the ocelot switch library, it can also be called from ocelot_port_inject_frame() in ocelot.c. We need to touch the lines with ocelot_ifh_port_set()'s prototype anyway, so let's rename it to something clearer regarding what it does, and add a kernel-doc. ocelot_ifh_set_basic() should do. Investigation notes ------------------- Debugging reveals that PTP event (aka those carrying timestamps, like Sync) frames injected into swp0.700 (but also swp1.700) hit the wire with two VLAN tags: 00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc ~~~~~~~~~~~ 00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00 ~~~~~~~~~~~ 00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03 00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00 00000040: 00 00 The second (unexpected) VLAN tag makes felix_check_xtr_pkt() -> ptp_classify_raw() fail to see these as PTP packets at the link partner's receiving end, and return PTP_CLASS_NONE (because the BPF classifier is not written to expect 2 VLAN tags). The reason why packets have 2 VLAN tags is because the transmission code treats VLAN incorrectly. Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX feature. Therefore, at xmit time, all VLANs should be in the skb head, and none should be in the hwaccel area. This is done by: static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb, netdev_features_t features) { if (skb_vlan_tag_present(skb) && !vlan_hw_offload_capable(features, skb->vlan_proto)) skb = __vlan_hwaccel_push_inside(skb); return skb; } But ocelot_port_inject_frame() handles things incorrectly: ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb)); void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op) { (...) if (vlan_tag) ocelot_ifh_set_vlan_tci(ifh, vlan_tag); (...) } The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head is by calling: static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb) { skb->vlan_present = 0; } which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get(). This means that ocelot, when it calls skb_vlan_tag_get(), sees (and uses) a residual skb->vlan_tci, while the same VLAN tag is _already_ in the skb head. The trivial fix for double VLAN headers is to replace the content of ocelot_ifh_port_set() with: if (skb_vlan_tag_present(skb)) ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb)); but this would not be correct either, because, as mentioned, vlan_hw_offload_capable() is false for us, so we'd be inserting dead code and we'd always transmit packets with VID=0 in the injection frame header. I can't actually test the ocelot switchdev driver and rely exclusively on code inspection, but I don't think traffic from 8021q uppers has ever been injected properly, and not double-tagged. Thus I'm blaming the introduction of VLAN fields in the injection header - early driver code. As hinted at in the early conclusion, what we _want_ to happen for VLAN transmission was already described once in commit 5ca721c5 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). ocelot_xmit_get_vlan_info() intends to ensure that if the port through which we're transmitting is under a VLAN-aware bridge, the outer VLAN tag from the skb head is stripped from there and inserted into the injection frame header (so that the packet is processed in hardware through that actual VLAN). And in all other cases, the packet is sent with VID=0 in the injection frame header, since the port is VLAN-unaware and has logic to strip this VID on egress (making it invisible to the wire). Fixes: 08d02364 ("net: mscc: fix the injection header") Signed-off-by:
-
Vladimir Oltean authored
The bridge VLAN implementation w.r.t. VLAN protocol is described in merge commit 1a0b20b2 ("Merge branch 'bridge-next'"). We are only sensitive to those VLAN tags whose TPID is equal to the bridge's vlan_protocol. Thus, an 802.1ad VLAN should be treated as 802.1Q-untagged. Add 3 tests which validate that: - 802.1ad-tagged traffic is learned into the PVID of an 802.1Q-aware bridge - Double-tagged traffic is forwarded when just the PVID of the port is present in the VLAN group of the ports - Double-tagged traffic is not forwarded when the PVID of the port is absent from the VLAN group of the ports The test passes with both veth and ocelot. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
-
Vladimir Oltean authored
A breakage in the felix DSA driver shows we do not have enough test coverage. More generally, it is sufficiently special that it is likely drivers will treat it differently. This is not meant to be a full PTP test, it just makes sure that PTP packets sent to the different addresses corresponding to their profiles are received correctly. The local_termination selftest seemed like the most appropriate place for this addition. PTP RX/TX in some cases makes no sense (over a bridge) and this is why $skip_ptp exists. And in others - PTP over a bridge port - the IP stack needs convincing through the available bridge netfilter hooks to leave the PTP packets alone and not stolen by the bridge rx_handler. It is safe to assume that users have that figured out already. This is a driver level test, and by using tcpdump, all that extra setup is out of scope here. send_non_ip() was an unfinished idea; written but never used. Replace it with a more generic send_raw(), and send 3 PTP packet types times 3 transports. Signed-off-by:
-
Vladimir Oltean authored
xfail_on_veth() for this test is an incorrect approximation which gives false positives and false negatives. When local_termination fails with "reception succeeded, but should have failed", it is because the DUT ($h2) accepts packets even when not configured as promiscuous. This is not something specific to veth; even the bridge behaves that way, but this is not captured by the xfail_on_veth test. The IFF_UNICAST_FLT flag is not explicitly exported to user space, but it can somewhat be determined from the interface's behavior. We have to create a macvlan upper with a different MAC address. This forces a dev_uc_add() call in the kernel. When the unicast filtering list is not empty, but the device doesn't support IFF_UNICAST_FLT, __dev_set_rx_mode() force-enables promiscuity on the interface, to ensure correct behavior (that the requested address is received). We can monitor the change in the promiscuity flag and infer from it whether the device supports unicast filtering. There is no equivalent thing for allmulti, unfortunately. We never know what's hiding behind a device which has allmulti=off. Whether it will actually perform RX multicast filtering of unknown traffic is a strong "maybe". The bridge driver, for example, completely ignores the flag. We'll have to keep the xfail behavior, but instead of XFAIL on just veth, always XFAIL. Signed-off-by:
-
Vladimir Oltean authored
Add more coverage to the local termination selftest as follows: - 8021q upper of $h2 - 8021q upper of $h2, where $h2 is a port of a VLAN-unaware bridge - 8021q upper of $h2, where $h2 is a port of a VLAN-aware bridge - 8021q upper of VLAN-unaware br0, which is the upper of $h2 - 8021q upper of VLAN-aware br0, which is the upper of $h2 Especially the cases with traffic sent through the VLAN upper of a VLAN-aware bridge port will be immediately relevant when we will start transmitting PTP packets as an additional kind of traffic. Signed-off-by:
-
Vladimir Oltean authored
The current bridge() test is for packet reception on a VLAN-unaware bridge. Some things are different enough with VLAN-aware bridges that it's worth renaming this test into vlan_unaware_bridge(), and add a new vlan_aware_bridge() test. The two will share the same implementation: bridge() becomes a common function, which receives $vlan_filtering as an argument. Rename it to test_bridge() at the same time, because just bridge() pollutes the global namespace and we cannot invoke the binary with the same name from the iproute2 package currently. Signed-off-by:
-
Vladimir Oltean authored
There are upcoming tests which verify the RX filtering of a bridge (or bridge port), but under differing vlan_filtering conditions. Since we currently print $h2 (the DUT) in the log_test() output, it becomes necessary to make a further distinction between tests, to not give the user the impression that the exact same thing is run twice. Signed-off-by:
-
Vladimir Oltean authored
In future changes we will want to subject the DUT, $h2, to additional VLAN-tagged traffic. For that, we need to run the tests using $h1.100 as a sending interface, rather than the currently hardcoded $h1. Add a parameter to run_test() and modify its 2 callers to explicitly pass $h1, as was implicit before. Signed-off-by:
-
Vladimir Oltean authored
This will be used in other subtests as well; make new macvlan_create() and macvlan_destroy() functions. Signed-off-by:
-
Jakub Kicinski authored
tools/testing/selftests/drivers/net/ is not listed under networking entries. Add it to NETWORKING DRIVERS. Reviewed-by:
-
Pavan Chebbi authored
The driver currently blindly deletes its cache of RSS cotexts and ntuple filters when the ethtool channel count is changing. It also deletes the ntuple filters cache when the default indirection table is changing. The core will not allow ethtool channels to drop below any that have been configured as ntuple destinations since this commit from 2022: 47f3ecf4 ("ethtool: Fail number of channels change when it conflicts with rxnfc") So there is absolutely no need to delete the ntuple filters and RSS contexts when changing ethtool channels. It is also unnecessary to delete ntuple filters when the default RSS indirection table is changing. Remove bnxt_clear_usr_fltrs() and bnxt_clear_rss_ctxis() from the ethtool ops and change them to static functions. This bug will cause confusion to the end user and causes failure when running the rss_ctx.py selftest. Fixes: 1018319f ("bnxt_en: Invalidate user filters when needed") Reported-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240814225429.199280-1-michael.chan@broadcom.comSigned-off-by:
-
Jiri Pirko authored
During suspend/resume the following BUG was hit: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: bluetooth ecdh_generic ecc libaes CPU: 1 PID: 1282 Comm: rtcwake Not tainted 6.10.0-rc3-00732-gc8bd1f7f #15240 Hardware name: Generic DT based system PC is at dql_completed+0x270/0x2cc LR is at __free_old_xmit+0x120/0x198 pc : [<c07ffa54>] lr : [<c0c42bf4>] psr: 80000013 ... Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 43a4406a DAC: 00000051 ... Process rtcwake (pid: 1282, stack limit = 0xfbc21278) Stack: (0xe0805e80 to 0xe0806000) ... Call trace: dql_completed from __free_old_xmit+0x120/0x198 __free_old_xmit from free_old_xmit+0x44/0xe4 free_old_xmit from virtnet_poll_tx+0x88/0x1b4 virtnet_poll_tx from __napi_poll+0x2c/0x1d4 __napi_poll from net_rx_action+0x140/0x2b4 net_rx_action from handle_softirqs+0x11c/0x350 handle_softirqs from call_with_stack+0x18/0x20 call_with_stack from do_softirq+0x48/0x50 do_softirq from __local_bh_enable_ip+0xa0/0xa4 __local_bh_enable_ip from virtnet_open+0xd4/0x21c virtnet_open from virtnet_restore+0x94/0x120 virtnet_restore from virtio_device_restore+0x110/0x1f4 virtio_device_restore from dpm_run_callback+0x3c/0x100 dpm_run_callback from device_resume+0x12c/0x2a8 device_resume from dpm_resume+0x12c/0x1e0 dpm_resume from dpm_resume_end+0xc/0x18 dpm_resume_end from suspend_devices_and_enter+0x1f0/0x72c suspend_devices_and_enter from pm_suspend+0x270/0x2a0 pm_suspend from state_store+0x68/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1cc kernfs_fop_write_iter from vfs_write+0x2b0/0x3dc vfs_write from ksys_write+0x5c/0xd4 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe8bf1fa8 to 0xe8bf1ff0) ... ---[ end trace 0000000000000000 ]--- After virtnet_napi_enable() is called, the following path is hit: __napi_poll() -> virtnet_poll() -> virtnet_poll_cleantx() -> netif_tx_wake_queue() That wakes the TX queue and allows skbs to be submitted and accounted by BQL counters. Then netdev_tx_reset_queue() is called that resets BQL counters and eventually leads to the BUG in dql_completed(). Move virtnet_napi_tx_enable() what does BQL counters reset before RX napi enable to avoid the issue. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/e632e378-d019-4de7-8f13-07c572ab37a9@samsung.com/ Fixes: c8bd1f7f ("virtio_net: add support for Byte Queue Limits") Tested-by:
Jiri Pirko <jiri@nvidia.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240814122500.1710279-1-jiri@resnulli.usSigned-off-by:
-
- 15 Aug, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter Current release - regressions: - udp: fall back to software USO if IPv6 extension headers are present - wifi: iwlwifi: correctly lookup DMA address in SG table Current release - new code bugs: - eth: mlx5e: fix queue stats access to non-existing channels splat Previous releases - regressions: - eth: mlx5e: take state lock during tx timeout reporter - eth: mlxbf_gige: disable RX filters until RX path initialized - eth: igc: fix reset adapter logics when tx mode change Previous releases - always broken: - tcp: update window clamping condition - netfilter: - nf_queue: drop packets with cloned unconfirmed conntracks - nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests - vsock: fix recursive ->recvmsg calls - dsa: vsc73xx: fix MDIO bus access and PHY opera - eth: gtp: pull network headers in gtp_dev_xmit() - eth: igc: fix packet still tx after gate close by reducing i226 MAC retry buffer - eth: mana: fix RX buf alloc_size alignment and atomic op panic - eth: hns3: fix a deadlock problem when config TC during resetting" * tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: hns3: use correct release function during uninitialization net: hns3: void array out of bound when loop tnl_num net: hns3: fix a deadlock problem when config TC during resetting net: hns3: use the user's cfg after reset net: hns3: fix wrong use of semaphore up selftests: net: lib: kill PIDs before del netns pse-core: Conditionally set current limit during PI regulator registration net: thunder_bgx: Fix netdev structure allocation net: ethtool: Allow write mechanism of LPL and both LPL and EPL vsock: fix recursive ->recvmsg calls selftest: af_unix: Fix kselftest compilation warnings netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests netfilter: nf_tables: Introduce nf_tables_getobj_single netfilter: nf_tables: Audit log dump reset after the fact selftests: netfilter: add test for br_netfilter+conntrack+queue combination netfilter: nf_queue: drop packets with cloned unconfirmed conntracks netfilter: flowtable: initialise extack before use netfilter: nfnetlink: Initialise extack before use in ACKs netfilter: allow ipv6 fragments to arrive on different devices tcp: Update window clamping condition ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Two regression fixes: - fix atomisp support for ISP2400 - fix dvb-usb regression for TeVii s480 dual DVB-S2 S660 board" * tag 'media/v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: atomisp: Fix streaming no longer working on BYT / ISP2400 devices media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linuxLinus Torvalds authored
Pull ata fix from Niklas Cassel: - Revert a recent change to sense data generation. Sense data can be in either fixed format or descriptor format. The D_SENSE bit in the Control mode page controls which format to generate. All places but one respected the D_SENSE bit. The recent change fixed the one place that didn't respect the D_SENSE bit. However, it turns out that hdparm, hddtemp and udisks (incorrectly) assumes sense data in descriptor format. Therefore, even while the change was technically correct, revert it, since even if these user space programs are fixed to (correctly) look at the format type before parsing the data, older versions of these tools will be around roughly forever. * tag 'ata-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"
-
