About half of the fields set by the call in ipa_modem_netdev_setup()
are overwritten after the call.  Instead, just skip the call, and
open-code the (other) assignments it makes to the net_device
structure fields.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we program an RX endpoint to have no header (header length is 0),
header-related endpoint configuration values are meaningless and are
ignored.

The only case we support that defines a header is QMAP endpoints.
In ipa_endpoint_init_hdr_ext() we set the endianness mask value
unconditionally, but it should not be done if there is no header
(meaning it is not configured for QMAP).

Set the endianness conditionally, and rearrange the logic in that
function slightly to avoid testing the qmap flag twice.

Delete an incorrect comment in ipa_endpoint_init_aggr().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CHANNEL_NOT_RUNNING error condition has been generalized, so
rename it to be INCORRECT_CHANNEL_STATE.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In gsi_channel_update(), a reference count is taken on the last
completed transaction "to keep it from completing" before we give
the event back to the hardware.  Completion processing for that
transaction (and any other "new" ones) will not occur until after
this function returns, so there's no risk it completing early.  So
there's no need to take and drop the additional transaction
reference.

Use local variables in the call to gsi_evt_ring_doorbell().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next, misc
updates and fallout fixes from recent Florian's code rewritting (from
last pull request):

1) Use new flowi4_l3mdev field in ip_route_me_harder(), from Martin Willi.

2) Avoid unnecessary GC with a timestamp in conncount, from William Tu
   and Yifeng Sun.

3) Remove TCP conntrack debugging, from Florian Westphal.

4) Fix compilation warning in ctnetlink, from Florian.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: ctnetlink: fix up for "netfilter: conntrack: remove unconfirmed list"
  netfilter: conntrack: remove pr_debug callsites from tcp tracker
  netfilter: nf_conncount: reduce unnecessary GC
  netfilter: Use l3mdev flow key when re-routing mangled packets
====================

Link: https://lore.kernel.org/r/20220519220206.722153-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I missed this in the barrage of GCC 12 warnings. Commit cf2df74e
("net: fix dev_fill_forward_path with pppoe + bridge") changed
the pointer into an array.

Fixes: d7e6f583 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Link: https://lore.kernel.org/r/20220520012555.2262461-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Miscellaneous fixes and a new test case

Patches 1 and 3 remove helpers that were iterating over the subflow
connection list without proper locking. Iteration was not needed in
either case.

Patch 2 fixes handling of MP_FAIL timeout, checking for orphaned
subflows instead of using the MPTCP socket data lock and connection
state.

Patch 4 adds a test for MP_FAIL timeout using tc pedit to induce checksum
failures.
====================

Link: https://lore.kernel.org/r/20220518220446.209750-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL
reset case. Use the test_linkfail value to make 1024KB test files.

Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules
to produce the bit flips to trigger the checksum failures on ns2eth2.
Add delays on ns2eth1 to make sure more data can translate on ns2eth2.

The check_invert flag is enabled in reset_with_fail(), so this test
prints out the inverted bytes, instead of the file mismatch errors.

Invoke pedit_action_pkts() to get the numbers of the packets edited
by the tc pedit actions, and print this numbers to the output.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The MPTCP socket's conn_list (list of subflows) requires the socket lock
to access. The MP_FAIL timeout code added such an access, where it would
check the list of subflows both in timer context and (later) in workqueue
context where the socket lock is held.

Rather than check the list twice, remove the check in the timeout
handler and only depend on the check in the workqueue. Also remove the
MPTCP_FAIL_NO_RESPONSE flag, since mptcp_mp_fail_no_response() has
insignificant overhead and can be checked on each worker run.

Fixes: 49fa1919 ("mptcp: reset subflow when MP_FAIL doesn't respond")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MP_FAIL timeout (waiting for a peer to respond to an MP_FAIL with
another MP_FAIL) is implemented using the MPTCP socket's sk_timer. That
timer is also used at MPTCP socket close, so it's important to not have
the two timer users interfere with each other.

At MPTCP socket close, all subflows are orphaned before sk_timer is
manipulated. By checking the SOCK_DEAD flag on the subflows, each
subflow can determine if the timer is safe to alter without acquiring
any MPTCP-level lock. This replaces code that was using the
mptcp_data_lock and MPTCP-level socket state checks that did not
correctly protect the timer.

Fixes: 49fa1919 ("mptcp: reset subflow when MP_FAIL doesn't respond")
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The mentioned helper requires the msk socket lock, and the
current callers don't own it nor can't acquire it, so the
access is racy.

All the current callers are really checking for infinite mapping
fallback, and the latter condition is explicitly tracked by
the relevant msk variable: we can safely remove the caller usage
- and the caller itself.

The issue is present since MP_FAIL implementation, but the
fix only applies since the infinite fallback support, ence the
somewhat unexpected fixes tag.

Fixes: 0530020a ("mptcp: track and update contiguous data status")
Acked-and-tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch improves TCP PRR loss recovery behavior for a corner
case. Previously during PRR conservation-bound mode, it strictly
sends the amount equals to the amount newly acked or s/acked.

The patch changes s.t. PRR may send additional amount that was banked
previously (e.g. application-limited) in the conservation-bound
mode, similar to the slow-start mode. This unifies and simplifies the
algorithm further and may improve the recovery latency. This change
still follow the general packet conservation design principle and
always keep inflight/cwnd below the slow start threshold set
by the congestion control module.

PRR is described in RFC 6937. We'll include this change in the
latest revision rfc6937-bis as well.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220519003410.2531936-1-ycheng@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current title of our section of the documentation is
Linux Networking Documentation. Since we're describing
a section of Linux Documentation repeating those two
words seems redundant.

Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

GCC 12 seems upset that we check ipa_irq against array bound
but then proceed, anyway:

drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’:
drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds]
  196 |         interrupt->handler[ipa_irq] = handler;
      |         ~~~~~~~~~~~~~~~~~~^~~~~~~~~
drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’
   42 |         ipa_irq_handler_t handler[IPA_IRQ_COUNT];
      |                           ^~~~~~~
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220519004417.2109886-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

GCC 12 warns:

drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress]
  406 |         if (!IPC_CB(skb)) {
      |             ^

Indeed the check seems entirely pointless. Hopefully the other
validation checks will catch if the cb is bad, but it can't be
NULL.
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Martin Blumenstingl says:

====================
lantiq_gswip: Two small fixes

While updating the Lantiq target in OpenWrt to Linux 5.15 I came across
an FDB related error message. While that still needs to be solved I
found two other small issues on the way.

This series fixes the two minor issues found while revisiting the FDB
code in the lantiq_gswip driver:
- The first patch fixes the start index used in gswip_port_fdb() to
  find the entry with the matching bridge. The updated logic is now
  consistent with the rest of the driver.
- The second patch fixes a typo in a dev_err() message.

[0] https://lore.kernel.org/netdev/20220517194015.1081632-1-martin.blumenstingl@googlemail.com/
====================

Link: https://lore.kernel.org/r/20220518220051.1520023-1-martin.blumenstingl@googlemail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

gswip_port_fdb_dump() reads the MAC bridge entries. The error message
should say "failed to read mac bridge entry". While here, also add the
index to the error print so humans can get to the cause of the problem
easier.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The first N entries in priv->vlans are reserved for managing ports which
are not part of a bridge. Use priv->hw_info->max_ports to consistently
access per-bridge entries at index 7. Starting at
priv->hw_info->cpu_port (6) is harmless in this case because
priv->vlan[6].bridge is always NULL so the comparison result is always
false (which results in this entry being skipped).
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

t7xx_request_irq() error: uninitialized symbol 'ret'.

t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'.
If the condition to enter the loop that waits for the handshake event
is false on the first iteration then the uninitialized 'event' will be
dereferenced, fix this by initializing 'event' to NULL.

t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'.
No need to check skb at t7xx_port_proxy_recv_skb() since we know it
is always called with a valid skb by t7xx_cldma_gpd_rx_from_q().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
mtk_eth_soc phylink updates

This series ultimately updates mtk_eth_soc to use phylink_pcs, with some
fixes along the way.

Previous attempts to update this driver (which is now marked as legacy)
have failed due to lack of testing. I am hoping that this time will be
different; Marek can test RGMII modes, but not SGMII. So all that we
know is that this patch series probably doesn't break RGMII.

1) remove unused mac_mode and sgmii flags members from structures.
2) remove unnecessary interpretation of speed when configuring 1000
   and 2500 Base-X
3) move configuration of SGMII duplex setting from mac_config() to
   link_up()
4) only pass in interface mode to mtk_sgmii_setup_mode_force()
5) move decision about which mtk_sgmii_setup_mode_*() function to call
   into mtk_sgmii.c
6) add a fixme comment for RGMII explaning why the call to
   mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be
   addressed by someone who has the hardware and can test an appropriate
   fix. This fixme means that the driver still can't become non-legacy.
7) move gmac setup from mac_config() to mac_finish() - this preserves
   the order that we write to the hardware when we eventually convert to
   phylink_pcs()
8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish()
   for the same reasons as (7).
9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to
   suit conversion to phylink_pcs
10) finally convert to phylink_pcs

As there has been no feedback from mtk_eth_soc maintainers to my RFC
on April 6th, not my reminder on April 11th, so it's now time to merge
this anyway. Mediatek code seems to be submitted to the kernel and
then the maintainers scarper...
====================

Link: https://lore.kernel.org/r/YoUIX+BN/ZbyXzTT@shell.armlinux.org.ukTested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Partially convert mtk_eth_soc to phylink_pcs, moving the configuration,
link up and AN restart over. However, it seems mac_pcs_get_state()
doesn't actually get the state from the PCS, so we can't convert that
over without a better understanding of the hardware.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide a mtk_pcs structure which encapsulates everything that the PCS
functions need (the regmap and ana_rgc3 offset), and use this in the
PCS functions. Provide shim functions to convert from the existing
"mtk_sgmii_*" interface to the converted PCS functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a
disabled state. In order to preserve this when we switch to phylink_pcs
we need to move the restoration of this register to the mac_finish()
callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the setting of the MTK_MAC_MCR register from the end of mac_config
into the phylink mac_finish() method, to keep it as the very last write
that is done during configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a fixme comment for the last remaining incorrect usage of
state->speed in the mac_config() method, which is strangely in a code
path which is only run when the PHY interface mode changes.

This means if we are in RGMII mode, changes in state->speed will not
cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to
be set according to the speed, nor will the TRGPLL clock be set to the
correct value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide mtk_sgmii_config() to wrap up the decisions about which SGMII
configuration will be called.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now that mtk_sgmii_setup_mode_force() only uses the interface mode
from the phylink state, pass just the interface mode into this
function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Phylink does not guarantee that state->duplex will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.

Move the 802.3z PCS duplex configuration to mac_link_up().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Phylink does not guarantee that state->speed will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Moreover, it is making use of it in a function that is only ever called
for 1000BASE-X and 2500BASE-X which operate at a fixed speed which
happens to be the same setting irrespective of the interface mode. We
can simply remove the switch statement and just set the SGMII interface
speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The PCS speed setting is a two bit field, but it is defined as two
separate bits. Add a bitfield mask for the speed definitions, an
 use the FIELD_PREP() macro to define each PCS speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "flags" member of struct mtk_sgmii appears to be unused, as are
the MTK_SGMII_PHYSPEED_* and MTK_HAS_FLAGS() macros. Remove them.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mac->mode is only ever written to in one location, and is thus
superflous. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Artem points out that skb may try to take over the skb and
queue it to its own list. Unlink the skb before calling out.

Fixes: b1a2c178 ("tls: rx: clear ctx->recv_pkt earlier")
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Link: https://lore.kernel.org/r/20220518205644.2059468-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The netif_receive_skb() function frees "skb" so store skb->len before
it is freed.

Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YoUuy4iTjFAcSn03@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Lenovo Thunderbolt 4 Dock, and other Lenovo USB Docks are using the
original Realtek USB ethernet Vendor and Product IDs
If the Network device is Realtek verify that it is on a Lenovo USB hub
before enabling the passthru feature

This also adds in the device IDs for the Lenovo USB Dongle and one other
USB-C dock

V2 fix formating of code
V3 remove Generic define for Device ID 0x8153 and change it to use value
V4 rearrange defines and case statement to put them in better order
v5 create helper function to do the testing work as suggested
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20220517180539.25839-1-dober6023@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.19-20220519' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-05-19

Oliver Hartkopp contributes a patch for the ISO-TP CAN protocol to
update the validation of address information during bind.

The next patch is by Jakub Kicinski and converts the CAN network
drivers from netif_napi_add() to the netif_napi_add_weight() function.

Another patch by Oliver Hartkopp removes obsolete CAN specific LED
support.

Vincent Mailhol's patch for the mcp251xfd driver fixes a
-Wunaligned-access warning by clang-14.

* tag 'linux-can-next-for-5.19-20220519' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: mcp251xfd: silence clang's -Wunaligned-access warning
  can: can-dev: remove obsolete CAN LED support
  can: can-dev: move to netif_napi_add_weight()
  can: isotp: isotp_bind(): do not validate unused address information
====================

Link: https://lore.kernel.org/r/20220519202308.1435903-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

clang emits a -Wunaligned-access warning on union
mcp251xfd_tx_ojb_load_buf.

The reason is that field hw_tx_obj (not declared as packed) is being
packed right after a 16 bits field inside a packed struct:

| union mcp251xfd_tx_obj_load_buf {
| 	struct __packed {
| 		struct mcp251xfd_buf_cmd cmd;
| 		  /* ^ 16 bits fields */
| 		struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| 		  /* ^ not declared as packed */
| 	} nocrc;
| 	struct __packed {
| 		struct mcp251xfd_buf_cmd_crc cmd;
| 		struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| 		__be16 crc;
| 	} crc;
| } ____cacheline_aligned;

Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].

This is a false positive because the field is always being accessed
with the relevant put_unaligned_*() function. Adding __packed to the
structure declaration silences the warning.

[1] https://github.com/llvm/llvm-project/issues/55520

Link: https://lore.kernel.org/all/20220518114357.55452-1-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Since commit 30f3b421 ("can: mark led trigger as broken") the
CAN specific LED support was disabled and marked as BROKEN. As the
common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work
now the code can be removed as preparation for a CAN netdevice Kconfig
rework.

Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.netSuggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
[mkl: remove led.h from MAINTAINERS]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We want to remove the weight argument from the basic version of the
netif_napi_add() call. Move all the callers in drivers/net/can that
pass a custom weight (i.e. not NAPI_POLL_WEIGHT or 64) to the
netif_napi_add_weight() API.

Link: https://lore.kernel.org/all/20220517002345.1812104-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

With commit 2aa39889 ("can: isotp: isotp_bind(): return -EINVAL on
incorrect CAN ID formatting") the bind() syscall returns -EINVAL when
the given CAN ID needed to be sanitized. But in the case of an unconfirmed
broadcast mode the rx CAN ID is not needed and may be uninitialized from
the caller - which is ok.

This patch makes sure the result of an inproper CAN ID format is only
provided when the address information is needed.

Link: https://lore.kernel.org/all/20220517145653.2556-1-socketcan@hartkopp.netSigned-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>