conditional on ARCH_H720X

Patch from G N Barzini

Currently under "System Type" you are always offered "h720x
Implementations" regardless of the system type selected. The fix for
this in the other Kconfig files seems to be enclose their contents
conditional in 'if ARCH_FOO'/'endif'. This patch does that.

Patch from Ben Dooks

This patch fixes the following problems:

- panic() in reset should be warning print, so that the
  system can then be soft-reset if this ever happens

- arch_idle() can now be over-ridden for purposes of
  implementing dyanmic voltage scaling (DVS) or any
  other form of idling

Signed-off-by: Ben Dooks 

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre 

- Add iomd, keyboard and acornfb platform devices.
- Convert rpckbd to use centrally registered platform device.
- Convert acornfb to use a platform device.

and atomic_dec_and_lock.

This means that we now have all of the spinlock context counting
infrastructure in place, and you can check-compile the kernel with 
sparse -Wcontext.

We rename the actual architecture-specific low-level implementation
to have a prepended underscore: "_atomic_dec_and_lock()".

This extra macro indirection is so that we can make the macro do
the lock context counting. That will be the next patch.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

- Add definition for SActive register
- Add most interrupt sources to default interrupt mask
- Write low 32 bits of FIS address to PxFB, where they belong
- Set command active bit in PxSACT before setting command issue bit in PxCI
- Announce Sub Class Code in driver info message [IDE, SATA or RAID]

and additionally, from me [jgarzik]:
- ignore ports-implemented bitmap for now; it's a write-only register
  that silly BIOSen initialize incorreclty
Signed-off-by: Matthijs Melchior <mmelchior@xs4all.nl>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

That's "cpu", not "cpy".

 - Add the PARISC tag (Thibaut Varene)
 - Mark some existing PA-RISC specific entries with it (Thibaut Varene)
 - Document pdcchassis (Thibaut Varene)

 - Fix "sti= parameter ignored by stifb" bug (Stuart Brady)
 - Fix the STI crash with HCRX-24 in 32bpp mode (Helge Deller)

100% cosmetic:  rename various symbols with 'sata' in them to 'ata',
in preparation for addition of support for a PATA controller.
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Description: Uses msleep() / ssleep() [as appropriate] instead of
schedule_timeout() to guarantee the task delays as expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Fix __init section usage:
rhine_resume calls enable_mmio, so latter cannot be __devinit;
Error: ./drivers/net/via-rhine.o .text refers to 0000000000000925 R_X86_64_PC32
.init.text+0xfffffffffffffffc
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This patch adds a few memory barriers, cleans up a little bit the
use of the "status" field in the rx & tx routines, and adds probing
for the external PHY to the driver.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This patch does an indentation fix to amd8111e_rx_poll() which was
incorrectly shifting left in the middle of a while() loop, thus
rendering the function difficult to read. There is no actual code
change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

My intel.com address will bounce.
Signed-off-by: Scott Feldman <sfeldma@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

It looks like this bit got mismerged (pci.h removed but DMA arguments
convertion missing).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

ARM udelay can't cope with >2ms delays.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into pobox.com:/garz/repo/libata-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Since bit 0 is only set when the MM is mapped onto the CPU, we can use
this rather than comparing the MM pointer with current->active_mm.
This simplifies the inline cache flushing and tlb code.

Christoph suggests letting the compiler choose.  No real compelling reason
to inline anyhow.  I had some vmlinux size numbers suggesting inline was
better, but re-running them on newer kernel is giving different results,
favoring uninline.  Best let compiler choose.  Un-inline __sigqueue_alloc.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>