Skip to content

L
linux
Switch branch/tag
  1. 04 May, 2021 3 commits
    • Tom Rix's avatar
      btrfs: initialize return variable in cleanup_free_space_cache_v1 · 77364faf
      Tom Rix authored 
      Static analysis reports this problem

  free-space-cache.c:3965:2: warning: Undefined or garbage value returned
    return ret;
    ^~~~~~~~~~

ret is set in the node handling loop.  Treat doing nothing as a success
and initialize ret to 0, although it's unlikely the loop would be
skipped. We always have block groups, but as it could lead to
transaction abort in the caller it's better to be safe.

CC: stable@vger.kernel.org # 5.12+
Signed-off-by: default avatarTom Rix <trix@redhat.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      77364faf
    • Naohiro Aota's avatar
      btrfs: zoned: sanity check zone type · 784daf2b
      Naohiro Aota authored 
      The fstests test case generic/475 creates a dm-linear device that gets
changed to a dm-error device. This leads to errors in loading the block
group's zone information when running on a zoned file system, ultimately
resulting in a list corruption. When running on a kernel with list
debugging enabled this leads to the following crash.

 BTRFS: error (device dm-2) in cleanup_transaction:1953: errno=-5 IO failure
 kernel BUG at lib/list_debug.c:54!
 invalid opcode: 0000 [#1] SMP PTI
 CPU: 1 PID: 2433 Comm: umount Tainted: G        W         5.12.0+ #1018
 RIP: 0010:__list_del_entry_valid.cold+0x1d/0x47
 RSP: 0018:ffffc90001473df0 EFLAGS: 00010296
 RAX: 0000000000000054 RBX: ffff8881038fd000 RCX: ffffc90001473c90
 RDX: 0000000100001a31 RSI: 0000000000000003 RDI: 0000000000000003
 RBP: ffff888308871108 R08: 0000000000000003 R09: 0000000000000001
 R10: 3961373532383838 R11: 6666666620736177 R12: ffff888308871000
 R13: ffff8881038fd088 R14: ffff8881038fdc78 R15: dead000000000100
 FS:  00007f353c9b1540(0000) GS:ffff888627d00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f353cc2c710 CR3: 000000018e13c000 CR4: 00000000000006a0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  btrfs_free_block_groups+0xc9/0x310 [btrfs]
  close_ctree+0x2ee/0x31a [btrfs]
  ? call_rcu+0x8f/0x270
  ? mutex_lock+0x1c/0x40
  generic_shutdown_super+0x67/0x100
  kill_anon_super+0x14/0x30
  btrfs_kill_super+0x12/0x20 [btrfs]
  deactivate_locked_super+0x31/0x90
  cleanup_mnt+0x13e/0x1b0
  task_work_run+0x63/0xb0
  exit_to_user_mode_loop+0xd9/0xe0
  exit_to_user_mode_prepare+0x3e/0x60
  syscall_exit_to_user_mode+0x1d/0x50
  entry_SYSCALL_64_after_hwframe+0x44/0xae

As dm-error has no support for zones, btrfs will run it's zone emulation
mode on this device. The zone emulation mode emulates conventional zones,
so bail out if the zone bitmap that gets populated on mount sees the zone
as sequential while we're thinking it's a conventional zone when creating
a block group.

Note: this scenario is unlikely in a real wold application and can only
happen by this (ab)use of device-mapper targets.

CC: stable@vger.kernel.org # 5.12+
Signed-off-by: default avatarNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: default avatarJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      784daf2b
    • Anand Jain's avatar
      btrfs: fix unmountable seed device after fstrim · 5e753a81
      Anand Jain authored 
      The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.

Create a seed device and add a sprout device to it:

  $ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
  $ btrfstune -S 1 /dev/loop0
  $ mount /dev/loop0 /btrfs
  $ btrfs dev add -f /dev/loop1 /btrfs
  BTRFS info (device loop0): relocating block group 290455552 flags system
  BTRFS info (device loop0): relocating block group 1048576 flags system
  BTRFS info (device loop0): disk added /dev/loop1
  $ umount /btrfs

Mount the sprout device and run fstrim:

  $ mount /dev/loop1 /btrfs
  $ fstrim /btrfs
  $ umount /btrfs

Now try to mount the seed device, and it fails:

  $ mount /dev/loop0 /btrfs
  mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.

Block 5292032 is missing on the readonly seed device:

 $ dmesg -kt | tail
 <snip>
 BTRFS error (device loop0): bad tree block start, want 5292032 have 0
 BTRFS warning (device loop0): couldn't read-tree root
 BTRFS error (device loop0): open_ctree failed

From the dump-tree of the seed device (taken before the fstrim). Block
5292032 belonged to the block group starting at 5242880:

  $ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP
  <snip>
  item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24
  	block group used 114688 chunk_objectid 256 flags METADATA
  <snip>

From the dump-tree of the sprout device (taken before the fstrim).
fstrim used block-group 5242880 to find the related free space to free:

  $ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP
  <snip>
  item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24
  	block group used 32768 chunk_objectid 256 flags METADATA
  <snip>

BPF kernel tracing the fstrim command finds the missing block 5292032
within the range of the discarded blocks as below:

  kprobe:btrfs_discard_extent {
  	printf("freeing start %llu end %llu num_bytes %llu:\n",
  		arg1, arg1+arg2, arg2);
  }

  freeing start 5259264 end 5406720 num_bytes 147456
  <snip>

Fix this by avoiding the discard command to the readonly seed device.
Reported-by: default avatarChris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarAnand Jain <anand.jain@oracle.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      5e753a81
  3. 28 Apr, 2021 4 commits
    • Filipe Manana's avatar
      btrfs: fix deadlock when cloning inline extents and using qgroups · f9baa501
      Filipe Manana authored 
      There are a few exceptional cases where cloning an inline extent needs to
copy the inline extent data into a page of the destination inode.

When this happens, we end up starting a transaction while having a dirty
page for the destination inode and while having the range locked in the
destination's inode iotree too. Because when reserving metadata space
for a transaction we may need to flush existing delalloc in case there is
not enough free space, we have a mechanism in place to prevent a deadlock,
which was introduced in commit 3d45f221 ("btrfs: fix deadlock when
cloning inline extent and low on free metadata space").

However when using qgroups, a transaction also reserves metadata qgroup
space, which can also result in flushing delalloc in case there is not
enough available space at the moment. When this happens we deadlock, since
flushing delalloc requires locking the file range in the inode's iotree
and the range was already locked at the very beginning of the clone
operation, before attempting to start the transaction.

When this issue happens, stack traces like the following are reported:

  [72747.556262] task:kworker/u81:9   state:D stack:    0 pid:  225 ppid:     2 flags:0x00004000
  [72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142)
  [72747.556271] Call Trace:
  [72747.556273]  __schedule+0x296/0x760
  [72747.556277]  schedule+0x3c/0xa0
  [72747.556279]  io_schedule+0x12/0x40
  [72747.556284]  __lock_page+0x13c/0x280
  [72747.556287]  ? generic_file_readonly_mmap+0x70/0x70
  [72747.556325]  extent_write_cache_pages+0x22a/0x440 [btrfs]
  [72747.556331]  ? __set_page_dirty_nobuffers+0xe7/0x160
  [72747.556358]  ? set_extent_buffer_dirty+0x5e/0x80 [btrfs]
  [72747.556362]  ? update_group_capacity+0x25/0x210
  [72747.556366]  ? cpumask_next_and+0x1a/0x20
  [72747.556391]  extent_writepages+0x44/0xa0 [btrfs]
  [72747.556394]  do_writepages+0x41/0xd0
  [72747.556398]  __writeback_single_inode+0x39/0x2a0
  [72747.556403]  writeback_sb_inodes+0x1ea/0x440
  [72747.556407]  __writeback_inodes_wb+0x5f/0xc0
  [72747.556410]  wb_writeback+0x235/0x2b0
  [72747.556414]  ? get_nr_inodes+0x35/0x50
  [72747.556417]  wb_workfn+0x354/0x490
  [72747.556420]  ? newidle_balance+0x2c5/0x3e0
  [72747.556424]  process_one_work+0x1aa/0x340
  [72747.556426]  worker_thread+0x30/0x390
  [72747.556429]  ? create_worker+0x1a0/0x1a0
  [72747.556432]  kthread+0x116/0x130
  [72747.556435]  ? kthread_park+0x80/0x80
  [72747.556438]  ret_from_fork+0x1f/0x30

  [72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
  [72747.566961] Call Trace:
  [72747.566964]  __schedule+0x296/0x760
  [72747.566968]  ? finish_wait+0x80/0x80
  [72747.566970]  schedule+0x3c/0xa0
  [72747.566995]  wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs]
  [72747.566999]  ? finish_wait+0x80/0x80
  [72747.567024]  lock_extent_bits+0x37/0x90 [btrfs]
  [72747.567047]  btrfs_invalidatepage+0x299/0x2c0 [btrfs]
  [72747.567051]  ? find_get_pages_range_tag+0x2cd/0x380
  [72747.567076]  __extent_writepage+0x203/0x320 [btrfs]
  [72747.567102]  extent_write_cache_pages+0x2bb/0x440 [btrfs]
  [72747.567106]  ? update_load_avg+0x7e/0x5f0
  [72747.567109]  ? enqueue_entity+0xf4/0x6f0
  [72747.567134]  extent_writepages+0x44/0xa0 [btrfs]
  [72747.567137]  ? enqueue_task_fair+0x93/0x6f0
  [72747.567140]  do_writepages+0x41/0xd0
  [72747.567144]  __filemap_fdatawrite_range+0xc7/0x100
  [72747.567167]  btrfs_run_delalloc_work+0x17/0x40 [btrfs]
  [72747.567195]  btrfs_work_helper+0xc2/0x300 [btrfs]
  [72747.567200]  process_one_work+0x1aa/0x340
  [72747.567202]  worker_thread+0x30/0x390
  [72747.567205]  ? create_worker+0x1a0/0x1a0
  [72747.567208]  kthread+0x116/0x130
  [72747.567211]  ? kthread_park+0x80/0x80
  [72747.567214]  ret_from_fork+0x1f/0x30

  [72747.569686] task:fsstress        state:D stack:    0 pid:841421 ppid:841417 flags:0x00000000
  [72747.569689] Call Trace:
  [72747.569691]  __schedule+0x296/0x760
  [72747.569694]  schedule+0x3c/0xa0
  [72747.569721]  try_flush_qgroup+0x95/0x140 [btrfs]
  [72747.569725]  ? finish_wait+0x80/0x80
  [72747.569753]  btrfs_qgroup_reserve_data+0x34/0x50 [btrfs]
  [72747.569781]  btrfs_check_data_free_space+0x5f/0xa0 [btrfs]
  [72747.569804]  btrfs_buffered_write+0x1f7/0x7f0 [btrfs]
  [72747.569810]  ? path_lookupat.isra.48+0x97/0x140
  [72747.569833]  btrfs_file_write_iter+0x81/0x410 [btrfs]
  [72747.569836]  ? __kmalloc+0x16a/0x2c0
  [72747.569839]  do_iter_readv_writev+0x160/0x1c0
  [72747.569843]  do_iter_write+0x80/0x1b0
  [72747.569847]  vfs_writev+0x84/0x140
  [72747.569869]  ? btrfs_file_llseek+0x38/0x270 [btrfs]
  [72747.569873]  do_writev+0x65/0x100
  [72747.569876]  do_syscall_64+0x33/0x40
  [72747.569879]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

  [72747.569899] task:fsstress        state:D stack:    0 pid:841424 ppid:841417 flags:0x00004000
  [72747.569903] Call Trace:
  [72747.569906]  __schedule+0x296/0x760
  [72747.569909]  schedule+0x3c/0xa0
  [72747.569936]  try_flush_qgroup+0x95/0x140 [btrfs]
  [72747.569940]  ? finish_wait+0x80/0x80
  [72747.569967]  __btrfs_qgroup_reserve_meta+0x36/0x50 [btrfs]
  [72747.569989]  start_transaction+0x279/0x580 [btrfs]
  [72747.570014]  clone_copy_inline_extent+0x332/0x490 [btrfs]
  [72747.570041]  btrfs_clone+0x5b7/0x7a0 [btrfs]
  [72747.570068]  ? lock_extent_bits+0x64/0x90 [btrfs]
  [72747.570095]  btrfs_clone_files+0xfc/0x150 [btrfs]
  [72747.570122]  btrfs_remap_file_range+0x3d8/0x4a0 [btrfs]
  [72747.570126]  do_clone_file_range+0xed/0x200
  [72747.570131]  vfs_clone_file_range+0x37/0x110
  [72747.570134]  ioctl_file_clone+0x7d/0xb0
  [72747.570137]  do_vfs_ioctl+0x138/0x630
  [72747.570140]  __x64_sys_ioctl+0x62/0xc0
  [72747.570143]  do_syscall_64+0x33/0x40
  [72747.570146]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

So fix this by skipping the flush of delalloc for an inode that is
flagged with BTRFS_INODE_NO_DELALLOC_FLUSH, meaning it is currently under
such a special case of cloning an inline extent, when flushing delalloc
during qgroup metadata reservation.

The special cases for cloning inline extents were added in kernel 5.7 by
by commit 05a5a762 ("Btrfs: implement full reflink support for
inline extents"), while having qgroup metadata space reservation flushing
delalloc when low on space was added in kernel 5.9 by commit
c53e9653 ("btrfs: qgroup: try to flush qgroup space when we get
-EDQUOT"). So use a "Fixes:" tag for the later commit to ease stable
kernel backports.
Reported-by: default avatarWang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20210421083137.31E3.409509F4@e16-tech.com/
Fixes: c53e9653 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.9+
Reviewed-by: default avatarQu Wenruo <wqu@suse.com>
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      f9baa501
    • Filipe Manana's avatar
      btrfs: fix race leading to unpersisted data and metadata on fsync · 626e9f41
      Filipe Manana authored 
      When doing a fast fsync on a file, there is a race which can result in the
fsync returning success to user space without logging the inode and without
durably persisting new data.

The following example shows one possible scenario for this:

   $ mkfs.btrfs -f /dev/sdc
   $ mount /dev/sdc /mnt

   $ touch /mnt/bar
   $ xfs_io -f -c "pwrite -S 0xab 0 1M" -c "fsync" /mnt/baz

   # Now we have:
   # file bar == inode 257
   # file baz == inode 258

   $ mv /mnt/baz /mnt/foo

   # Now we have:
   # file bar == inode 257
   # file foo == inode 258

   $ xfs_io -c "pwrite -S 0xcd 0 1M" /mnt/foo

   # fsync bar before foo, it is important to trigger the race.
   $ xfs_io -c "fsync" /mnt/bar
   $ xfs_io -c "fsync" /mnt/foo

   # After this:
   # inode 257, file bar, is empty
   # inode 258, file foo, has 1M filled with 0xcd

   <power failure>

   # Replay the log:
   $ mount /dev/sdc /mnt

   # After this point file foo should have 1M filled with 0xcd and not 0xab

The following steps explain how the race happens:

1) Before the first fsync of inode 258, when it has the "baz" name, its
   ->logged_trans is 0, ->last_sub_trans is 0 and ->last_log_commit is -1.
   The inode also has the full sync flag set;

2) After the first fsync, we set inode 258 ->logged_trans to 6, which is
   the generation of the current transaction, and set ->last_log_commit
   to 0, which is the current value of ->last_sub_trans (done at
   btrfs_log_inode()).

   The full sync flag is cleared from the inode during the fsync.

   The log sub transaction that was committed had an ID of 0 and when we
   synced the log, at btrfs_sync_log(), we incremented root->log_transid
   from 0 to 1;

3) During the rename:

   We update inode 258, through btrfs_update_inode(), and that causes its
   ->last_sub_trans to be set to 1 (the current log transaction ID), and
   ->last_log_commit remains with a value of 0.

   After updating inode 258, because we have previously logged the inode
   in the previous fsync, we log again the inode through the call to
   btrfs_log_new_name(). This results in updating the inode's
   ->last_log_commit from 0 to 1 (the current value of its
   ->last_sub_trans).

   The ->last_sub_trans of inode 257 is updated to 1, which is the ID of
   the next log transaction;

4) Then a buffered write against inode 258 is made. This leaves the value
   of ->last_sub_trans as 1 (the ID of the current log transaction, stored
   at root->log_transid);

5) Then an fsync against inode 257 (or any other inode other than 258),
   happens. This results in committing the log transaction with ID 1,
   which results in updating root->last_log_commit to 1 and bumping
   root->log_transid from 1 to 2;

6) Then an fsync against inode 258 starts. We flush delalloc and wait only
   for writeback to complete, since the full sync flag is not set in the
   inode's runtime flags - we do not wait for ordered extents to complete.

   Then, at btrfs_sync_file(), we call btrfs_inode_in_log() before the
   ordered extent completes. The call returns true:

     static inline bool btrfs_inode_in_log(...)
     {
         bool ret = false;

         spin_lock(&inode->lock);
         if (inode->logged_trans == generation &&
             inode->last_sub_trans <= inode->last_log_commit &&
             inode->last_sub_trans <= inode->root->last_log_commit)
                 ret = true;
         spin_unlock(&inode->lock);
         return ret;
     }

   generation has a value of 6 (fs_info->generation), ->logged_trans also
   has a value of 6 (set when we logged the inode during the first fsync
   and when logging it during the rename), ->last_sub_trans has a value
   of 1, set during the rename (step 3), ->last_log_commit also has a
   value of 1 (set in step 3) and root->last_log_commit has a value of 1,
   which was set in step 5 when fsyncing inode 257.

   As a consequence we don't log the inode, any new extents and do not
   sync the log, resulting in a data loss if a power failure happens
   after the fsync and before the current transaction commits.
   Also, because we do not log the inode, after a power failure the mtime
   and ctime of the inode do not match those we had before.

   When the ordered extent completes before we call btrfs_inode_in_log(),
   then the call returns false and we log the inode and sync the log,
   since at the end of ordered extent completion we update the inode and
   set ->last_sub_trans to 2 (the value of root->log_transid) and
   ->last_log_commit to 1.

This problem is found after removing the check for the emptiness of the
inode's list of modified extents in the recent commit 209ecbb8
("btrfs: remove stale comment and logic from btrfs_inode_in_log()"),
added in the 5.13 merge window. However checking the emptiness of the
list is not really the way to solve this problem, and was never intended
to, because while that solves the problem for COW writes, the problem
persists for NOCOW writes because in that case the list is always empty.

In the case of NOCOW writes, even though we wait for the writeback to
complete before returning from btrfs_sync_file(), we end up not logging
the inode, which has a new mtime/ctime, and because we don't sync the log,
we never issue disk barriers (send REQ_PREFLUSH to the device) since that
only happens when we sync the log (when we write super blocks at
btrfs_sync_log()). So effectively, for a NOCOW case, when we return from
btrfs_sync_file() to user space, we are not guaranteeing that the data is
durably persisted on disk.

Also, while the example above uses a rename exchange to show how the
problem happens, it is not the only way to trigger it. An alternative
could be adding a new hard link to inode 258, since that also results
in calling btrfs_log_new_name() and updating the inode in the log.
An example reproducer using the addition of a hard link instead of a
rename operation:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt

  $ touch /mnt/bar
  $ xfs_io -f -c "pwrite -S 0xab 0 1M" -c "fsync" /mnt/foo

  $ ln /mnt/foo /mnt/foo_link
  $ xfs_io -c "pwrite -S 0xcd 0 1M" /mnt/foo

  $ xfs_io -c "fsync" /mnt/bar
  $ xfs_io -c "fsync" /mnt/foo

  <power failure>

  # Replay the log:
  $ mount /dev/sdc /mnt

  # After this point file foo often has 1M filled with 0xab and not 0xcd

The reasons leading to the final fsync of file foo, inode 258, not
persisting the new data are the same as for the previous example with
a rename operation.

So fix by never skipping logging and log syncing when there are still any
ordered extents in flight. To avoid making the conditional if statement
that checks if logging an inode is needed harder to read, place all the
logic into an helper function with separate if statements to make it more
manageable and easier to read.

A test case for fstests will follow soon.

For NOCOW writes, the problem existed before commit b5e6c3e1
("btrfs: always wait on ordered extents at fsync time"), introduced in
kernel 4.19, then it went away with that commit since we started to always
wait for ordered extent completion before logging.

The problem came back again once the fast fsync path was changed again to
avoid waiting for ordered extent completion, in commit 48778179
("btrfs: make fast fsyncs wait only for writeback"), added in kernel 5.10.

However, for COW writes, the race only happens after the recent
commit 209ecbb8 ("btrfs: remove stale comment and logic from
btrfs_inode_in_log()"), introduced in the 5.13 merge window. For NOCOW
writes, the bug existed before that commit. So tag 5.10+ as the release
for stable backports.

CC: stable@vger.kernel.org # 5.10+
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      626e9f41
    • Filipe Manana's avatar
      btrfs: do not consider send context as valid when trying to flush qgroups · ffb7c2e9
      Filipe Manana authored 
      At qgroup.c:try_flush_qgroup() we are asserting that current->journal_info
is either NULL or has the value BTRFS_SEND_TRANS_STUB.

However allowing for BTRFS_SEND_TRANS_STUB makes no sense because:

1) It is misleading, because send operations are read-only and do not
   ever need to reserve qgroup space;

2) We already assert that current->journal_info != BTRFS_SEND_TRANS_STUB
   at transaction.c:start_transaction();

3) On a kernel without CONFIG_BTRFS_ASSERT=y set, it would result in
   a crash if try_flush_qgroup() is ever called in a send context, because
   at transaction.c:start_transaction we cast current->journal_info into
   a struct btrfs_trans_handle pointer and then dereference it.

So just do allow a send context at try_flush_qgroup() and update the
comment about it.
Reviewed-by: default avatarQu Wenruo <wqu@suse.com>
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      ffb7c2e9
    • Filipe Manana's avatar
      btrfs: zoned: fix silent data loss after failure splitting ordered extent · adbd914d
      Filipe Manana authored 
      On a zoned filesystem, sometimes we need to split an ordered extent into 3
different ordered extents. The original ordered extent is shortened, at
the front and at the rear, and we create two other new ordered extents to
represent the trimmed parts of the original ordered extent.

After adjusting the original ordered extent, we create an ordered extent
to represent the pre-range, and that may fail with ENOMEM for example.
After that we always try to create the ordered extent for the post-range,
and if that happens to succeed we end up returning success to the caller
as we overwrite the 'ret' variable which contained the previous error.

This means we end up with a file range for which there is no ordered
extent, which results in the range never getting a new file extent item
pointing to the new data location. And since the split operation did
not return an error, writeback does not fail and the inode's mapping is
not flagged with an error, resulting in a subsequent fsync not reporting
an error either.

It's possibly very unlikely to have the creation of the post-range ordered
extent succeed after the creation of the pre-range ordered extent failed,
but it's not impossible.

So fix this by making sure we only create the post-range ordered extent
if there was no error creating the ordered extent for the pre-range.

Fixes: d22002fd ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      adbd914d
  5. 20 Apr, 2021 7 commits
    • Johannes Thumshirn's avatar
      btrfs: zoned: automatically reclaim zones · 18bb8bbf
      Johannes Thumshirn authored 
      When a file gets deleted on a zoned file system, the space freed is not
returned back into the block group's free space, but is migrated to
zone_unusable.

As this zone_unusable space is behind the current write pointer it is not
possible to use it for new allocations. In the current implementation a
zone is reset once all of the block group's space is accounted as zone
unusable.

This behaviour can lead to premature ENOSPC errors on a busy file system.

Instead of only reclaiming the zone once it is completely unusable,
kick off a reclaim job once the amount of unusable bytes exceeds a user
configurable threshold between 51% and 100%. It can be set per mounted
filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75%
by default.

Similar to reclaiming unused block groups, these dirty block groups are
added to a to_reclaim list and then on a transaction commit, the reclaim
process is triggered but after we deleted unused block groups, which will
free space for the relocation process.
Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      18bb8bbf
    • Johannes Thumshirn's avatar
      btrfs: rename delete_unused_bgs_mutex to reclaim_bgs_lock · f3372065
      Johannes Thumshirn authored 
      As a preparation for extending the block group deletion use case, rename
the unused_bgs_mutex to reclaim_bgs_lock.
Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Signed-off-by: default avatarJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      f3372065
    • Johannes Thumshirn's avatar
      btrfs: zoned: reset zones of relocated block groups · 01e86008
      Johannes Thumshirn authored 
      When relocating a block group the freed up space is not discarded in one
big block, but each extent is discarded on its own with -odisard=sync.

For a zoned filesystem we need to discard the whole block group at once,
so btrfs_discard_extent() will translate the discard into a
REQ_OP_ZONE_RESET operation, which then resets the device's zone.
Failure to reset the zone is not fatal error.

Discussion about the approach and regarding transaction blocking:
https://lore.kernel.org/linux-btrfs/CAL3q7H4SjS_d5rBepfTMhU8Th3bJzdmyYd0g4Z60yUgC_rC_ZA@mail.gmail.com/Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      01e86008
    • Qu Wenruo's avatar
      btrfs: more graceful errors/warnings on 32bit systems when reaching limits · e9306ad4
      Qu Wenruo authored 
      Btrfs uses internally mapped u64 address space for all its metadata.
Due to the page cache limit on 32bit systems, btrfs can't access
metadata at or beyond (ULONG_MAX + 1) << PAGE_SHIFT. See
how MAX_LFS_FILESIZE and page::index are defined.  This is 16T for 4K
page size while 256T for 64K page size.

Users can have a filesystem which doesn't have metadata beyond the
boundary at mount time, but later balance can cause it to create
metadata beyond the boundary.

And modification to MM layer is unrealistic just for such minor use
case. We can't do more than to prevent mounting such filesystem or warn
early when the numbers are still within the limits.

To address such problem, this patch will introduce the following checks:

- Mount time rejection
  This will reject any fs which has metadata chunk at or beyond the
  boundary.

- Mount time early warning
  If there is any metadata chunk beyond 5/8th of the boundary, we do an
  early warning and hope the end user will see it.

- Runtime extent buffer rejection
  If we're going to allocate an extent buffer at or beyond the boundary,
  reject such request with EOVERFLOW.
  This is definitely going to cause problems like transaction abort, but
  we have no better ways.

- Runtime extent buffer early warning
  If an extent buffer beyond 5/8th of the max file size is allocated, do
  an early warning.

Above error/warning message will only be printed once for each fs to
reduce dmesg flood.

If the mount is rejected, the filesystem will be mountable only on a
64bit host.

Link: https://lore.kernel.org/linux-btrfs/1783f16d-7a28-80e6-4c32-fdf19b705ed0@gmx.com/Reported-by: default avatarErik Jensen <erikjensen@rkjnsn.net>
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Signed-off-by: default avatarQu Wenruo <wqu@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      e9306ad4
    • Filipe Manana's avatar
      btrfs: zoned: fix unpaired block group unfreeze during device replace · 0dc16ef4
      Filipe Manana authored 
      When doing a device replace on a zoned filesystem, if we find a block
group with ->to_copy == 0, we jump to the label 'done', which will result
in later calling btrfs_unfreeze_block_group(), even though at this point
we never called btrfs_freeze_block_group().

Since at this point we have neither turned the block group to RO mode nor
made any progress, we don't need to jump to the label 'done'. So fix this
by jumping instead to the label 'skip' and dropping our reference on the
block group before the jump.

Fixes: 78ce9fc2 ("btrfs: zoned: mark block groups to copy for device-replace")
CC: stable@vger.kernel.org # 5.12
Reviewed-by: default avatarJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      0dc16ef4
    • Filipe Manana's avatar
      btrfs: fix race when picking most recent mod log operation for an old root · f9690f42
      Filipe Manana authored 
      Commit dbcc7d57 ("btrfs: fix race when cloning extent buffer during
rewind of an old root"), fixed a race when we need to rewind the extent
buffer of an old root. It was caused by picking a new mod log operation
for the extent buffer while getting a cloned extent buffer with an outdated
number of items (off by -1), because we cloned the extent buffer without
locking it first.

However there is still another similar race, but in the opposite direction.
The cloned extent buffer has a number of items that does not match the
number of tree mod log operations that are going to be replayed. This is
because right after we got the last (most recent) tree mod log operation to
replay and before locking and cloning the extent buffer, another task adds
a new pointer to the extent buffer, which results in adding a new tree mod
log operation and incrementing the number of items in the extent buffer.
So after cloning we have mismatch between the number of items in the extent
buffer and the number of mod log operations we are going to apply to it.
This results in hitting a BUG_ON() that produces the following stack trace:

   ------------[ cut here ]------------
   kernel BUG at fs/btrfs/tree-mod-log.c:675!
   invalid opcode: 0000 [#1] SMP KASAN PTI
   CPU: 3 PID: 4811 Comm: crawl_1215 Tainted: G        W         5.12.0-7d1efdf501f8-misc-next+ #99
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
   RIP: 0010:tree_mod_log_rewind+0x3b1/0x3c0
   Code: 05 48 8d 74 10 (...)
   RSP: 0018:ffffc90001027090 EFLAGS: 00010293
   RAX: 0000000000000000 RBX: ffff8880a8514600 RCX: ffffffffaa9e59b6
   RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8880a851462c
   RBP: ffffc900010270e0 R08: 00000000000000c0 R09: ffffed1004333417
   R10: ffff88802199a0b7 R11: ffffed1004333416 R12: 000000000000000e
   R13: ffff888135af8748 R14: ffff88818766ff00 R15: ffff8880a851462c
   FS:  00007f29acf62700(0000) GS:ffff8881f2200000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: 00007f0e6013f718 CR3: 000000010d42e003 CR4: 0000000000170ee0
   Call Trace:
    btrfs_get_old_root+0x16a/0x5c0
    ? lock_downgrade+0x400/0x400
    btrfs_search_old_slot+0x192/0x520
    ? btrfs_search_slot+0x1090/0x1090
    ? free_extent_buffer.part.61+0xd7/0x140
    ? free_extent_buffer+0x13/0x20
    resolve_indirect_refs+0x3e9/0xfc0
    ? lock_downgrade+0x400/0x400
    ? __kasan_check_read+0x11/0x20
    ? add_prelim_ref.part.11+0x150/0x150
    ? lock_downgrade+0x400/0x400
    ? __kasan_check_read+0x11/0x20
    ? lock_acquired+0xbb/0x620
    ? __kasan_check_write+0x14/0x20
    ? do_raw_spin_unlock+0xa8/0x140
    ? rb_insert_color+0x340/0x360
    ? prelim_ref_insert+0x12d/0x430
    find_parent_nodes+0x5c3/0x1830
    ? stack_trace_save+0x87/0xb0
    ? resolve_indirect_refs+0xfc0/0xfc0
    ? fs_reclaim_acquire+0x67/0xf0
    ? __kasan_check_read+0x11/0x20
    ? lockdep_hardirqs_on_prepare+0x210/0x210
    ? fs_reclaim_acquire+0x67/0xf0
    ? __kasan_check_read+0x11/0x20
    ? ___might_sleep+0x10f/0x1e0
    ? __kasan_kmalloc+0x9d/0xd0
    ? trace_hardirqs_on+0x55/0x120
    btrfs_find_all_roots_safe+0x142/0x1e0
    ? find_parent_nodes+0x1830/0x1830
    ? trace_hardirqs_on+0x55/0x120
    ? ulist_free+0x1f/0x30
    ? btrfs_inode_flags_to_xflags+0x50/0x50
    iterate_extent_inodes+0x20e/0x580
    ? tree_backref_for_extent+0x230/0x230
    ? release_extent_buffer+0x225/0x280
    ? read_extent_buffer+0xdd/0x110
    ? lock_downgrade+0x400/0x400
    ? __kasan_check_read+0x11/0x20
    ? lock_acquired+0xbb/0x620
    ? __kasan_check_write+0x14/0x20
    ? do_raw_spin_unlock+0xa8/0x140
    ? _raw_spin_unlock+0x22/0x30
    ? release_extent_buffer+0x225/0x280
    iterate_inodes_from_logical+0x129/0x170
    ? iterate_inodes_from_logical+0x129/0x170
    ? btrfs_inode_flags_to_xflags+0x50/0x50
    ? iterate_extent_inodes+0x580/0x580
    ? __vmalloc_node+0x92/0xb0
    ? init_data_container+0x34/0xb0
    ? init_data_container+0x34/0xb0
    ? kvmalloc_node+0x60/0x80
    btrfs_ioctl_logical_to_ino+0x158/0x230
    btrfs_ioctl+0x2038/0x4360
    ? __kasan_check_write+0x14/0x20
    ? mmput+0x3b/0x220
    ? btrfs_ioctl_get_supported_features+0x30/0x30
    ? __kasan_check_read+0x11/0x20
    ? __kasan_check_read+0x11/0x20
    ? lock_release+0xc8/0x650
    ? __might_fault+0x64/0xd0
    ? __kasan_check_read+0x11/0x20
    ? lock_downgrade+0x400/0x400
    ? lockdep_hardirqs_on_prepare+0x210/0x210
    ? lockdep_hardirqs_on_prepare+0x13/0x210
    ? _raw_spin_unlock_irqrestore+0x51/0x63
    ? __kasan_check_read+0x11/0x20
    ? do_vfs_ioctl+0xfc/0x9d0
    ? ioctl_file_clone+0xe0/0xe0
    ? lock_downgrade+0x400/0x400
    ? lockdep_hardirqs_on_prepare+0x210/0x210
    ? __kasan_check_read+0x11/0x20
    ? lock_release+0xc8/0x650
    ? __task_pid_nr_ns+0xd3/0x250
    ? __kasan_check_read+0x11/0x20
    ? __fget_files+0x160/0x230
    ? __fget_light+0xf2/0x110
    __x64_sys_ioctl+0xc3/0x100
    do_syscall_64+0x37/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xae
   RIP: 0033:0x7f29ae85b427
   Code: 00 00 90 48 8b (...)
   RSP: 002b:00007f29acf5fcf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
   RAX: ffffffffffffffda RBX: 00007f29acf5ff40 RCX: 00007f29ae85b427
   RDX: 00007f29acf5ff48 RSI: 00000000c038943b RDI: 0000000000000003
   RBP: 0000000001000000 R08: 0000000000000000 R09: 00007f29acf60120
   R10: 00005640d5fc7b00 R11: 0000000000000246 R12: 0000000000000003
   R13: 00007f29acf5ff48 R14: 00007f29acf5ff40 R15: 00007f29acf5fef8
   Modules linked in:
   ---[ end trace 85e5fce078dfbe04 ]---

  (gdb) l *(tree_mod_log_rewind+0x3b1)
  0xffffffff819e5b21 is in tree_mod_log_rewind (fs/btrfs/tree-mod-log.c:675).
  670                      * the modification. As we're going backwards, we do the
  671                      * opposite of each operation here.
  672                      */
  673                     switch (tm->op) {
  674                     case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
  675                             BUG_ON(tm->slot < n);
  676                             fallthrough;
  677                     case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_MOVING:
  678                     case BTRFS_MOD_LOG_KEY_REMOVE:
  679                             btrfs_set_node_key(eb, &tm->key, tm->slot);
  (gdb) quit

The following steps explain in more detail how it happens:

1) We have one tree mod log user (through fiemap or the logical ino ioctl),
   with a sequence number of 1, so we have fs_info->tree_mod_seq == 1.
   This is task A;

2) Another task is at ctree.c:balance_level() and we have eb X currently as
   the root of the tree, and we promote its single child, eb Y, as the new
   root.

   Then, at ctree.c:balance_level(), we call:

      ret = btrfs_tree_mod_log_insert_root(root->node, child, true);

3) At btrfs_tree_mod_log_insert_root() we create a tree mod log operation
   of type BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING, with a ->logical field
   pointing to ebX->start. We only have one item in eb X, so we create
   only one tree mod log operation, and store in the "tm_list" array;

4) Then, still at btrfs_tree_mod_log_insert_root(), we create a tree mod
   log element of operation type BTRFS_MOD_LOG_ROOT_REPLACE, ->logical set
   to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level
   set to the level of eb X and ->generation set to the generation of eb X;

5) Then btrfs_tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
   "tm_list" as argument. After that, tree_mod_log_free_eb() calls
   tree_mod_log_insert(). This inserts the mod log operation of type
   BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING from step 3 into the rbtree
   with a sequence number of 2 (and fs_info->tree_mod_seq set to 2);

6) Then, after inserting the "tm_list" single element into the tree mod
   log rbtree, the BTRFS_MOD_LOG_ROOT_REPLACE element is inserted, which
   gets the sequence number 3 (and fs_info->tree_mod_seq set to 3);

7) Back to ctree.c:balance_level(), we free eb X by calling
   btrfs_free_tree_block() on it. Because eb X was created in the current
   transaction, has no other references and writeback did not happen for
   it, we add it back to the free space cache/tree;

8) Later some other task B allocates the metadata extent from eb X, since
   it is marked as free space in the space cache/tree, and uses it as a
   node for some other btree;

9) The tree mod log user task calls btrfs_search_old_slot(), which calls
   btrfs_get_old_root(), and finally that calls tree_mod_log_oldest_root()
   with time_seq == 1 and eb_root == eb Y;

10) The first iteration of the while loop finds the tree mod log element
    with sequence number 3, for the logical address of eb Y and of type
    BTRFS_MOD_LOG_ROOT_REPLACE;

11) Because the operation type is BTRFS_MOD_LOG_ROOT_REPLACE, we don't
    break out of the loop, and set root_logical to point to
    tm->old_root.logical, which corresponds to the logical address of
    eb X;

12) On the next iteration of the while loop, the call to
    tree_mod_log_search_oldest() returns the smallest tree mod log element
    for the logical address of eb X, which has a sequence number of 2, an
    operation type of BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and
    corresponds to the old slot 0 of eb X (eb X had only 1 item in it
    before being freed at step 7);

13) We then break out of the while loop and return the tree mod log
    operation of type BTRFS_MOD_LOG_ROOT_REPLACE (eb Y), and not the one
    for slot 0 of eb X, to btrfs_get_old_root();

14) At btrfs_get_old_root(), we process the BTRFS_MOD_LOG_ROOT_REPLACE
    operation and set "logical" to the logical address of eb X, which was
    the old root. We then call tree_mod_log_search() passing it the logical
    address of eb X and time_seq == 1;

15) But before calling tree_mod_log_search(), task B locks eb X, adds a
    key to eb X, which results in adding a tree mod log operation of type
    BTRFS_MOD_LOG_KEY_ADD, with a sequence number of 4, to the tree mod
    log, and increments the number of items in eb X from 0 to 1.
    Now fs_info->tree_mod_seq has a value of 4;

16) Task A then calls tree_mod_log_search(), which returns the most recent
    tree mod log operation for eb X, which is the one just added by task B
    at the previous step, with a sequence number of 4, a type of
    BTRFS_MOD_LOG_KEY_ADD and for slot 0;

17) Before task A locks and clones eb X, task A adds another key to eb X,
    which results in adding a new BTRFS_MOD_LOG_KEY_ADD mod log operation,
    with a sequence number of 5, for slot 1 of eb X, increments the
    number of items in eb X from 1 to 2, and unlocks eb X.
    Now fs_info->tree_mod_seq has a value of 5;

18) Task A then locks eb X and clones it. The clone has a value of 2 for
    the number of items and the pointer "tm" points to the tree mod log
    operation with sequence number 4, not the most recent one with a
    sequence number of 5, so there is mismatch between the number of
    mod log operations that are going to be applied to the cloned version
    of eb X and the number of items in the clone;

19) Task A then calls tree_mod_log_rewind() with the clone of eb X, the
    tree mod log operation with sequence number 4 and a type of
    BTRFS_MOD_LOG_KEY_ADD, and time_seq == 1;

20) At tree_mod_log_rewind(), we set the local variable "n" with a value
    of 2, which is the number of items in the clone of eb X.

    Then in the first iteration of the while loop, we process the mod log
    operation with sequence number 4, which is targeted at slot 0 and has
    a type of BTRFS_MOD_LOG_KEY_ADD. This results in decrementing "n" from
    2 to 1.

    Then we pick the next tree mod log operation for eb X, which is the
    tree mod log operation with a sequence number of 2, a type of
    BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and for slot 0, it is the one
    added in step 5 to the tree mod log tree.

    We go back to the top of the loop to process this mod log operation,
    and because its slot is 0 and "n" has a value of 1, we hit the BUG_ON:

        (...)
        switch (tm->op) {
        case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
                BUG_ON(tm->slot < n);
                fallthrough;
	(...)

Fix this by checking for a more recent tree mod log operation after locking
and cloning the extent buffer of the old root node, and use it as the first
operation to apply to the cloned extent buffer when rewinding it.

Stable backport notes: due to moved code and renames, in =< 5.11 the
change should be applied to ctree.c:get_old_root.
Reported-by: default avatarZygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210404040732.GZ32440@hungrycats.org/
Fixes: 834328a8 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      f9690f42
    • Filipe Manana's avatar
      btrfs: fix metadata extent leak after failure to create subvolume · 67addf29
      Filipe Manana authored 
      When creating a subvolume we allocate an extent buffer for its root node
after starting a transaction. We setup a root item for the subvolume that
points to that extent buffer and then attempt to insert the root item into
the root tree - however if that fails, due to ENOMEM for example, we do
not free the extent buffer previously allocated and we do not abort the
transaction (as at that point we did nothing that can not be undone).

This means that we effectively do not return the metadata extent back to
the free space cache/tree and we leave a delayed reference for it which
causes a metadata extent item to be added to the extent tree, in the next
transaction commit, without having backreferences. When this happens
'btrfs check' reports the following:

  $ btrfs check /dev/sdi
  Opening filesystem to check...
  Checking filesystem on /dev/sdi
  UUID: dce2cb9d-025f-4b05-a4bf-cee0ad3785eb
  [1/7] checking root items
  [2/7] checking extents
  ref mismatch on [30425088 16384] extent item 1, found 0
  backref 30425088 root 256 not referenced back 0x564a91c23d70
  incorrect global backref count on 30425088 found 1 wanted 0
  backpointer mismatch on [30425088 16384]
  owner ref check failed [30425088 16384]
  ERROR: errors found in extent allocation tree or chunk allocation
  [3/7] checking free space cache
  [4/7] checking fs roots
  [5/7] checking only csums items (without verifying data)
  [6/7] checking root refs
  [7/7] checking quota groups skipped (not enabled on this FS)
  found 212992 bytes used, error(s) found
  total csum bytes: 0
  total tree bytes: 131072
  total fs tree bytes: 32768
  total extent tree bytes: 16384
  btree space waste bytes: 124669
  file data blocks allocated: 65536
   referenced 65536

So fix this by freeing the metadata extent if btrfs_insert_root() returns
an error.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      67addf29
  7. 19 Apr, 2021 26 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7