- 30 May, 2018 40 commits
-
-
Xin Long authored
[ Upstream commit 5c78f6bf ] vlan_vids_add_by_dev is called right after dev hwaddr sync, so on the err path it should unsync dev hwaddr. Otherwise, the slave dev's hwaddr will never be unsync when this err happens. Fixes: 1ff412ad ("bonding: change the bond's vlan syncing functions with the standard ones") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pawel Dembicki authored
[ Upstream commit 74398925 ] BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
-
Raghuram Chary J authored
[ Upstream commit e69647a1 ] Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by:
-
Jinbum Park authored
[ Upstream commit 73b9160d ] Define vdso_start, vdso_end as array to avoid compile-time analysis error for the case of built with CONFIG_FORTIFY_SOURCE. and, since vdso_start, vdso_end are used in vdso.c only, move extern-declaration from vdso.h to vdso.c. If kernel is built with CONFIG_FORTIFY_SOURCE, compile-time error happens at this code. - if (memcmp(&vdso_start, "177ELF", 4)) The size of "&vdso_start" is recognized as 1 byte, but n is 4, So that compile-time error is reported. Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Jinbum Park <jinb.park7@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit a752c0a4 ] DHCP connectivity issues can currently occur if the following conditions are met: 1) A DHCP packet from a client to a server 2) This packet has a multicast destination 3) This destination has a matching entry in the translation table (FF:FF:FF:FF:FF:FF for IPv4, 33:33:00:01:00:02/33:33:00:01:00:03 for IPv6) 4) The orig-node determined by TT for the multicast destination does not match the orig-node determined by best-gateway-selection In this case the DHCP packet will be dropped. The "gateway-out-of-range" check is supposed to only be applied to unicasted DHCP packets to a specific DHCP server. In that case dropping the the unicasted frame forces the client to retry via a broadcasted one, but now directed to the new best gateway. A DHCP packet with broadcast/multicast destination is already ensured to always be delivered to the best gateway. Dropping a multicasted DHCP packet here will only prevent completing DHCP as there is no other fallback. So far, it seems the unicast check was implicitly performed by expecting the batadv_transtable_search() to return NULL for multicast destinations. However, a multicast address could have always ended up in the translation table and in fact is now common. To fix this potential loss of a DHCP client-to-server packet to a multicast address this patch adds an explicit multicast destination check to reliably bail out of the gateway-out-of-range check for such destinations. The issue and fix were tested in the following three node setup: - Line topology, A-B-C - A: gateway client, DHCP client - B: gateway server, hop-penalty increased: 30->60, DHCP server - C: gateway server, code modifications to announce FF:FF:FF:FF:FF:FF Without this patch, A would never transmit its DHCP Discover packet due to an always "out-of-range" condition. With this patch, a full DHCP handshake between A and B was possible again. Fixes: be7af5cf ("batman-adv: refactoring gateway handling code") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit f8fb3419 ] For multicast frames AP isolation is only supposed to be checked on the receiving nodes and never on the originating one. Furthermore, the isolation or wifi flag bits should only be intepreted as such for unicast and never multicast TT entries. By injecting flags to the multicast TT entry claimed by a single target node it was verified in tests that this multicast address becomes unreachable, leading to packet loss. Omitting the "src" parameter to the batadv_transtable_search() call successfully skipped the AP isolation check and made the target reachable again. Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets") Signed-off-by:
-
Felix Kuehling authored
[ Upstream commit c70a3626 ] Program sh_hidden_private_base_vmid correctly in the map-process PM4 packet. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit dfa453bc ] Add a testcase for probe point definition. This tests symbol, address and symbol+offset syntax. The offset must be positive and smaller than UINT_MAX. Link: http://lkml.kernel.org/r/152129043097.31874.14273580606301767394.stgit@devboxSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 5fbdbed7 ] Add a testcase for string type with kprobe event. This tests good/bad syntax combinations and also the traced data is correct in several way. Link: http://lkml.kernel.org/r/152129038381.31874.9201387794548737554.stgit@devboxSigned-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 871bef20 ] Add a testcase for probe event argument syntax which ensures the kprobe_events interface correctly parses given event arguments. Link: http://lkml.kernel.org/r/152129033679.31874.12705519603869152799.stgit@devboxSigned-off-by:
-
Steffen Klassert authored
[ Upstream commit 9a3fb9fb ] A recent commit introduced a new struct xfrm_trans_cb that is used with the sk_buff control buffer. Unfortunately it placed the structure in front of the control buffer and overlooked that the IPv4/IPv6 control buffer is still needed for some layer 4 protocols. As a result the IPv4/IPv6 control buffer is overwritten with this structure. Fix this by setting a apropriate header in front of the structure. Fixes acf568ee ("xfrm: Reinject transport-mode packets ...") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
David Rientjes authored
[ Upstream commit 9d3c3354 ] Commit 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") changed the page allocator to no longer detect thp allocations based on __GFP_NORETRY. It did not, however, modify the mem cgroup try_charge() path to avoid oom kill for either khugepaged collapsing or thp faulting. It is never expected to oom kill a process to allocate a hugepage for thp; reclaim is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations (and charging) should fallback instead of oom killing processes. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com Fixes: 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations") Signed-off-by:
David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yisheng Xie authored
[ Upstream commit 8970a63e ] Alexander reported a use of uninitialized memory in __mpol_equal(), which is caused by incorrect use of preferred_node. When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses numa_node_id() instead of preferred_node, however, __mpol_equal() uses preferred_node without checking whether it is MPOL_F_LOCAL or not. [akpm@linux-foundation.org: slight comment tweak] Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com Fixes: fc36b8d3 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy") Signed-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Reported-by:
Alexander Potapenko <glider@google.com> Tested-by:
-
Y.C. Chen authored
[ Upstream commit 5a9f698f ] The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz. Here is the update to fix it. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 40013ff2 ] We have a functional dependency on the FIXED_PHY MDIO bus because we register fixed PHY devices "the old way" which only works if the code that does this has had a chance to run before the fixed MDIO bus is probed. Make sure we account for that and have dsa_loop_bdinfo.o be either built-in or modular depending on whether CONFIG_FIXED_PHY reflects that too. Fixes: 98cd1552 ("net: dsa: Mock-up driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit f29cdfbe ] tcf_skbmod_init() can fail after the idr has been successfully reserved. When this happens, every subsequent attempt to configure skbmod rules using the same idr value will systematically fail with -ENOSPC, unless the first attempt was done using the 'replace' keyword: # tc action add action skbmod swap mac index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action add action skbmod swap mac index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc action add action skbmod swap mac index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called on the error path when the idr has been reserved, but not yet inserted. Also, don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly become a 'delete' that leaks refcount in act_skbmod module: # rmmod act_skbmod; modprobe act_skbmod # tc action add action skbmod swap mac index 100 # tc action add action skbmod swap mac continue index 100 RTNETLINK answers: File exists We have an error talking to the kernel # tc action replace action skbmod swap mac continue index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action list action skbmod # # rmmod act_skbmod rmmod: ERROR: Module act_skbmod is in use Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 1e46ef17 ] __tcf_ipt_init() can fail after the idr has been successfully reserved. When this happens, subsequent attempts to configure xt/ipt rules using the same idr value systematically fail with -ENOSPC: # tc action add action xt -j LOG --log-prefix test1 index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "test1" index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel Command "(null)" is unknown, try "tc actions help". # tc action add action xt -j LOG --log-prefix test1 index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "test1" index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel Command "(null)" is unknown, try "tc actions help". # tc action add action xt -j LOG --log-prefix test1 index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "test1" index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target() to avoid NULL pointer dereference. Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by:
-
Davide Caratti authored
[ Upstream commit 94fa3f92 ] tcf_pedit_init() can fail to allocate 'keys' after the idr has been successfully reserved. When this happens, subsequent attempts to configure a pedit rule using the same idr value systematically fail with -ENOSPC: # tc action add action pedit munge ip ttl set 63 index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action add action pedit munge ip ttl set 63 index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc action add action pedit munge ip ttl set 63 index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in the error path of tcf_act_pedit_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by:
-
Davide Caratti authored
[ Upstream commit 5bf7f818 ] tcf_act_police_init() can fail after the idr has been successfully reserved (e.g., qdisc_get_rtab() may return NULL). When this happens, subsequent attempts to configure a police rule using the same idr value systematiclly fail with -ENOSPC: # tc action add action police rate 1000 burst 1000 drop index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action add action police rate 1000 burst 1000 drop index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc action add action police rate 1000 burst 1000 drop index 100 RTNETLINK answers: No space left on device ... Fix this in the error path of tcf_act_police_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by:
-
Davide Caratti authored
[ Upstream commit 60e10b3a ] if the kernel fails to duplicate 'sdata', creation of a new action fails with -ENOMEM. However, subsequent attempts to install the same action using the same value of 'index' systematically fail with -ENOSPC, and that value of 'index' will no more be usable by act_simple, until rmmod / insmod of act_simple.ko is done: # tc actions add action simple sdata hello index 100 # tc actions list action simple action order 0: Simple <hello> index 100 ref 1 bind 0 # tc actions flush action simple # tc actions add action simple sdata hello index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc actions flush action simple # tc actions add action simple sdata hello index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel # tc actions add action simple sdata hello index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel ... Fix this in the error path of tcf_simp_init(), calling tcf_idr_release() in place of tcf_idr_cleanup(). Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Davide Caratti authored
[ Upstream commit bbc09e78 ] when the following command sequence is entered # tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100 RTNETLINK answers: Invalid argument We have an error talking to the kernel # tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100 RTNETLINK answers: No space left on device We have an error talking to the kernel act_bpf correctly refuses to install the first TC rule, because 31 is not a valid instruction. However, it refuses to install the second TC rule, even if the BPF code is correct. Furthermore, it's no more possible to install any other rule having the same value of 'index' until act_bpf module is unloaded/inserted again. After the idr has been reserved, call tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue. Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Acked-by:
-
Kalderon, Michal authored
[ Upstream commit caf61b1b ] Once the FW is transitioned to error, FLUSH cqes can be received. We want the driver to be aware of the fact that QP is already in error. Without this fix, a user may see false error messages in the dmesg log, mentioning that a FLUSH cqe was received while QP is not in error state. Fixes: cecbcddf ("qedr: Add support for QP verbs") Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kalderon, Michal authored
[ Upstream commit b15606f4 ] Return code wasn't set properly when CNQ allocation failed. This only affect error message logging, currently user will receive an error message that says the qedr driver load failed with rc '0', instead of ENOMEM Fixes: ec72fce4 ("qedr: Add support for RoCE HW init") Signed-off-by:
-
Kalderon, Michal authored
[ Upstream commit c3594f22 ] QPs that were configured with ack timeout value lower than 1 msec will not implement re-transmission timeout. This means that if a packet / ACK were dropped, the QP will not retransmit this packet. This can lead to an application hang. Fixes: cecbcddf ("qedr: Add support for QP verbs") Signed-off-by:
-
Chien Tin Tung authored
[ Upstream commit 5f3e3b85 ] The option size check is using optval instead of optlen causing the set option call to fail. Use the correct field, optlen, for size check. Fixes: 6a21dfc0 ("RDMA/ucma: Limit possible option size") Signed-off-by:
Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Nicolas Pitre authored
[ Upstream commit 825d4875 ] Some filesystems have timestamps with coarse precision that may allow for a recently built object file to have the same timestamp as the updated time on one of its dependency files. When that happens, the object file doesn't get rebuilt as it should. This is especially the case on filesystems that don't have sub-second time precision, such as ext3 or Ext4 with 128B inodes. Let's prevent that by making sure updated dependency files have a newer timestamp than the first file we created (i.e. autoksyms.h.tmpnew). Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 9b9322db ] The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f7 ("regulatory: add NUL to request alpha2") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Song Liu authored
[ Upstream commit c917e0f2 ] When a perf_event is attached to parent cgroup, it should count events for all children cgroups: parent_group <---- perf_event \ - child_group <---- process(es) However, in our tests, we found this perf_event cannot report reliable results. Here is an example case: # create cgroups mkdir -p /sys/fs/cgroup/p/c # start perf for parent group perf stat -e instructions -G "p" # on another console, run test process in child cgroup: stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs # after the test process is done, stop perf in the first console shows <not counted> instructions p The instruction should not be "not counted" as the process runs in the child cgroup. We found this is because perf_event->cgrp and cpuctx->cgrp are not identical, thus perf_event->cgrp are not updated properly. This patch fixes this by updating perf_cgroup properly for ancestor cgroup(s). Reported-by:
Ephraim Park <ephiepark@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <jolsa@redhat.com> Cc: <kernel-team@fb.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20180312165943.1057894-1-songliubraving@fb.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 192b4af6 ] Since commit 846c7dfc ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), removing the last framebuffer will no longer disable the corresponding pipeline, which causes the KMS core to complain about leaked connectors on driver unbind. Fix this by calling drm_atomic_helper_shutdown() on driver unbind, which will cause all display pipelines to be shut down and therefore drop the extra references on the connectors. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Avraham Stern authored
[ Upstream commit 4a6d2e52 ] When starting aggregation, the code checks the status of the queue allocated to the aggregation tid, which might not yet be allocated and thus the queue index may be invalid. Fix this by reserving a new queue in case the queue id is invalid. While at it, clean up some unreachable code (a condition that is already handled earlier) and remove all the non-DQA comments since non-DQA mode is no longer supported. Fixes: cf961e16 ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Avraham Stern authored
[ Upstream commit df65c8d1 ] If the driver failed to resume from D3, it is possible that it has no valid aux station. In such case, fw restart will end up in sending station related commands with an invalid station id, which will result in an assert. Fix this by allocating a new station id for the aux station if it does not have a valid id even in the case of fw restart. Signed-off-by:
-
Avraham Stern authored
[ Upstream commit 4b387906 ] When a queue is reserved for aggregation, the queue id is assigned to the tid_data. This is fine since iwl_mvm_sta_tx_agg_oper() takes care of allocating the queue before actual tx starts. When the reservation is cancelled (e.g. when the AP declined the aggregation request) the tid_data is not cleared. As a result, following tx for this tid was trying to use an unallocated queue. Fix this by setting the txq_id for the tid to invalid when unreserving the queue. Signed-off-by:
-
Andrei Otcheretianski authored
[ Upstream commit 19125cb0 ] After switching to a new channel, driver schedules session protection time event in order to hear the beacon on the new channel. The duration of the protection is two beacon intervals. However, since we start to switch slightly before beacon with count 1, in case we don't hear (or AP doesn't transmit) the very first beacon on the new channel the protection ends without hearing any beacon at all. At this stage the switch is not complete, the queues are closed and the interface doesn't have quota yet or TBTT events. As the result, we are stuck forever waiting for iwl_mvm_post_channel_switch() to be called. Fix this by increasing the protection time to be 3 beacon intervals and in addition drop the connection if the time event ends before we got any beacon. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit f8a554b4 ] We shouldn't allow a tunnel to have IP_MAX_MTU as MTU, because another IPv6 header is going on top of our packets. Without this patch, we might end up building packets bigger than IP_MAX_MTU. Fixes: b96f9afe ("ipv4/6: use core net MTU range checking") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 03080e5e ] Don't hardcode a MTU value on vti tunnel initialization, ip_tunnel_newlink() is able to deal with this already. See also commit ffc2b6ee ("ip_gre: fix IFLA_MTU ignored on NEWLINK"). Fixes: 1181412c ("net/ipv4: VTI support new module for ip_vti.") Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 24fc7979 ] Otherwise, it's possible to specify invalid MTU values directly on creation of a link (via 'ip link add'). This is already prevented on subsequent MTU changes by commit b96f9afe ("ipv4/6: use core net MTU range checking"). Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit dd1df247 ] This re-introduces the effect of commit a3245236 ("vti4: Don't count header length twice.") which was accidentally reverted by merge commit f895f0cf ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec"). The commit message from Steffen Klassert said: We currently count the size of LL_MAX_HEADER and struct iphdr twice for vti4 devices, this leads to a wrong device mtu. The size of LL_MAX_HEADER and struct iphdr is already counted in ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init(). And this is still the case now: ip_tunnel_bind_dev() already accounts for the header length of the link layer (not necessarily LL_MAX_HEADER, if the output device is found), plus one IP header. For example, with a vti device on top of veth, with MTU of 1500, the existing implementation would set the initial vti MTU to 1332, accounting once for LL_MAX_HEADER (128, included in hard_header_len by vti) and twice for the same IP header (once from hard_header_len, once from ip_tunnel_bind_dev()). It should instead be 1480, because ip_tunnel_bind_dev() is able to figure out that the output device is veth, so no additional link layer header is attached, and will properly count one single IP header. The existing issue had the side effect of avoiding PMTUD for most xfrm policies, by arbitrarily lowering the initial MTU. However, the only way to get a consistent PMTU value is to let the xfrm PMTU discovery do its course, and commit d6af1a31 ("vti: Add pmtu handling to vti_xmit.") now takes care of local delivery cases where the application ignores local socket notifications. Fixes: b9959fd3 ("vti: switch to new ip tunnel code") Fixes: f895f0cf ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit fc04fdb2 ] batadv_check_unicast_ttvn may redirect a packet to itself or another originator. This involves rewriting the ttvn and the destination address in the batadv unicast header. These field were not yet pulled (with skb rcsum update) and thus any change to them also requires a change in the receive checksum. Reported-by:
Matthias Schiffer <mschiffer@universe-factory.net> Fixes: a73105b8 ("batman-adv: improved client announcement mechanism") Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 1f110e7c ] when the following command # tc action add action sample rate 100 group 100 index 100 is run for the first time, and psample_group_get(100) fails to create a new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus causing the following error: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c IP: psample_group_put+0x15/0x71 [psample] PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0 Oops: 0002 [#1] SMP PTI Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key] CPU: 2 PID: 5740 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:psample_group_put+0x15/0x71 [psample] RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c FS: 00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0 Call Trace: __tcf_idr_release+0x79/0xf0 tcf_sample_init+0x125/0x1d0 [act_sample] tcf_action_init_1+0x2cc/0x430 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.28+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? filemap_map_pages+0x34a/0x3a0 ? __handle_mm_fault+0xbfd/0xe20 __sys_sendmsg+0x51/0x90 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7f7637523ba0 RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0 RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003 RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60 Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0 CR2: 000000000000001c Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p) are done only when p is not NULL. Fixes: cadb9c9f ("net/sched: act_sample: Fix error path in init") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Matthias Schiffer authored
[ Upstream commit 6f27d2c2 ] Checking for 0 is insufficient: when an SKB without a batadv header, but with a VLAN header is received, hdr_size will be 4, making the following code interpret the Ethernet header as a batadv header. Fixes: be1db4f6 ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by:
-
