1. 04 Jun, 2012 15 commits
    • Arik Nemtsov's avatar
      mac80211: fix non RCU-safe sta_list manipulation · 794454ce
      Arik Nemtsov authored
      sta_info_cleanup locks the sta_list using rcu_read_lock however
      the delete operation isn't rcu safe. A race between sta_info_cleanup
      timer being called and a STA being removed can occur which leads
      to a panic while traversing sta_list. Fix this by switching to the
      RCU-safe versions.
      
      Cc: stable@vger.kernel.org
      Reported-by: default avatarEyal Shapira <eyal@wizery.com>
      Signed-off-by: default avatarArik Nemtsov <arik@wizery.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      794454ce
    • Seth Forshee's avatar
      bcma: add ext PA workaround for BCM4331 and BCM43431 · 69aaedd3
      Seth Forshee authored
      MacBook Pro models with BCM4331 wireless have been found to have the ext
      PA lines disabled after resuming from S3 without external power attach.
      This causes them to be unable to transmit. Add a workaround to ensure
      that the ext PA lines are enabled on BCM4331. Also extend all handling
      of ext PA line muxing to BCM43431 as is done in the Broadcom SDK.
      
      BugLink: http://bugs.launchpad.net/bugs/925577
      Cc: Arend van Spriel <arend@broadcom.com>
      Cc: Hauke Mehrtens <hauke@hauke-m.de>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarSeth Forshee <seth.forshee@canonical.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      69aaedd3
    • Stanislaw Gruszka's avatar
      rt2x00: use atomic variable for seqno · e5851dac
      Stanislaw Gruszka authored
      Remove spinlock as atomic_t can be used instead. Note we use only 16
      lower bits, upper bits are changed but we impilcilty cast to u16.
      
      This fix possible deadlock on IBSS mode reproted by lockdep:
      
      =================================
      [ INFO: inconsistent lock state ]
      3.4.0-wl+ #4 Not tainted
      ---------------------------------
      inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
      kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes:
       (&(&intf->seqlock)->rlock){+.?...}, at: [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
      {IN-SOFTIRQ-W} state was registered at:
        [<c04978ab>] __lock_acquire+0x47b/0x1050
        [<c0498504>] lock_acquire+0x84/0xf0
        [<c0835733>] _raw_spin_lock+0x33/0x40
        [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
        [<f9979f2a>] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib]
        [<f997834f>] rt2x00mac_tx+0x7f/0x380 [rt2x00lib]
        [<f98fe363>] __ieee80211_tx+0x1b3/0x300 [mac80211]
        [<f98ffdf5>] ieee80211_tx+0x105/0x130 [mac80211]
        [<f99000dd>] ieee80211_xmit+0xad/0x100 [mac80211]
        [<f9900519>] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211]
        [<c0782e87>] dev_hard_start_xmit+0x307/0x660
        [<c079bb71>] sch_direct_xmit+0xa1/0x1e0
        [<c0784bb3>] dev_queue_xmit+0x183/0x730
        [<c078c27a>] neigh_resolve_output+0xfa/0x1e0
        [<c07b436a>] ip_finish_output+0x24a/0x460
        [<c07b4897>] ip_output+0xb7/0x100
        [<c07b2d60>] ip_local_out+0x20/0x60
        [<c07e01ff>] igmpv3_sendpack+0x4f/0x60
        [<c07e108f>] igmp_ifc_timer_expire+0x29f/0x330
        [<c04520fc>] run_timer_softirq+0x15c/0x2f0
        [<c0449e3e>] __do_softirq+0xae/0x1e0
      irq event stamp: 18380437
      hardirqs last  enabled at (18380437): [<c0526027>] __slab_alloc.clone.3+0x67/0x5f0
      hardirqs last disabled at (18380436): [<c0525ff3>] __slab_alloc.clone.3+0x33/0x5f0
      softirqs last  enabled at (18377616): [<c0449eb3>] __do_softirq+0x123/0x1e0
      softirqs last disabled at (18377611): [<c041278d>] do_softirq+0x9d/0xe0
      
      other info that might help us debug this:
       Possible unsafe locking scenario:
      
             CPU0
             ----
        lock(&(&intf->seqlock)->rlock);
        <Interrupt>
          lock(&(&intf->seqlock)->rlock);
      
       *** DEADLOCK ***
      
      4 locks held by kworker/u:2/30374:
       #0:  (wiphy_name(local->hw.wiphy)){++++.+}, at: [<c045cf99>] process_one_work+0x109/0x3f0
       #1:  ((&sdata->work)){+.+.+.}, at: [<c045cf99>] process_one_work+0x109/0x3f0
       #2:  (&ifibss->mtx){+.+.+.}, at: [<f98f005b>] ieee80211_ibss_work+0x1b/0x470 [mac80211]
       #3:  (&intf->beacon_skb_mutex){+.+...}, at: [<f997a644>] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib]
      
      stack backtrace:
      Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4
      Call Trace:
       [<c04962a6>] print_usage_bug+0x1f6/0x220
       [<c0496a12>] mark_lock+0x2c2/0x300
       [<c0495ff0>] ? check_usage_forwards+0xc0/0xc0
       [<c04978ec>] __lock_acquire+0x4bc/0x1050
       [<c0527890>] ? __kmalloc_track_caller+0x1c0/0x1d0
       [<c0777fb6>] ? copy_skb_header+0x26/0x90
       [<c0498504>] lock_acquire+0x84/0xf0
       [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
       [<c0835733>] _raw_spin_lock+0x33/0x40
       [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
       [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
       [<f997a5cf>] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib]
       [<f997a64d>] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib]
       [<f9977e3a>] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib]
       [<f9977c70>] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib]
       [<f98e4dd0>] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211]
       [<f98ef7b8>] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211]
       [<c0496ab4>] ? mark_held_locks+0x64/0xc0
       [<c0440012>] ? virt_efi_query_capsule_caps+0x12/0x50
       [<f98efb09>] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211]
       [<f98f0456>] ieee80211_ibss_work+0x416/0x470 [mac80211]
       [<c0496d8b>] ? trace_hardirqs_on+0xb/0x10
       [<c077683b>] ? skb_dequeue+0x4b/0x70
       [<f98f207f>] ieee80211_iface_work+0x13f/0x230 [mac80211]
       [<c045cf99>] ? process_one_work+0x109/0x3f0
       [<c045d015>] process_one_work+0x185/0x3f0
       [<c045cf99>] ? process_one_work+0x109/0x3f0
       [<f98f1f40>] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211]
       [<c045ed86>] worker_thread+0x116/0x270
       [<c045ec70>] ? manage_workers+0x1e0/0x1e0
       [<c0462f64>] kthread+0x84/0x90
       [<c0462ee0>] ? __init_kthread_worker+0x60/0x60
       [<c083d382>] kernel_thread_helper+0x6/0x10
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
      Acked-by: default avatarHelmut Schaa <helmut.schaa@googlemail.com>
      Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      e5851dac
    • Joe Perches's avatar
      brcmfmac: Fix likely misuse of | for & · f304a993
      Joe Perches authored
      Using | with a constant is always true.
      Likely this should have be &.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Acked-by: default avatarArend van Spriel <arend@broadcom.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      f304a993
    • Joe Perches's avatar
      mac80211: Fix likely misuse of | for & · 5204267d
      Joe Perches authored
      Using | with a constant is always true.
      Likely this should have be &.
      
      cc: Ben Greear <greearb@candelatech.com>
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      5204267d
    • Felix Fietkau's avatar
      mac80211: add missing rcu_read_lock/unlock in agg-rx session timer · d8c7aae6
      Felix Fietkau authored
      Fixes a lockdep warning:
      
      ===================================================
      [ INFO: suspicious rcu_dereference_check() usage. ]
      ---------------------------------------------------
      net/mac80211/agg-rx.c:148 invoked rcu_dereference_check() without protection!
      
      other info that might help us debug this:
      
      rcu_scheduler_active = 1, debug_locks = 1
      1 lock held by arecord/11226:
       #0:  (&tid_agg_rx->session_timer){+.-...}, at: [<ffffffff81066bb0>] call_timer_fn+0x0/0x360
      
      stack backtrace:
      Pid: 11226, comm: arecord Not tainted 3.1.0-kml #16
      Call Trace:
       <IRQ>  [<ffffffff81093454>] lockdep_rcu_dereference+0xa4/0xc0
       [<ffffffffa02778c9>] sta_rx_agg_session_timer_expired+0xc9/0x110 [mac80211]
       [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211]
       [<ffffffff81066c3a>] call_timer_fn+0x8a/0x360
       [<ffffffff81066bb0>] ? init_timer_deferrable_key+0x30/0x30
       [<ffffffff81477bb0>] ? _raw_spin_unlock_irq+0x30/0x70
       [<ffffffff81067049>] run_timer_softirq+0x139/0x310
       [<ffffffff81091d5e>] ? put_lock_stats.isra.25+0xe/0x40
       [<ffffffff810922ac>] ? lock_release_holdtime.part.26+0xdc/0x160
       [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211]
       [<ffffffff8105cb78>] __do_softirq+0xc8/0x3c0
       [<ffffffff8108f088>] ? tick_dev_program_event+0x48/0x110
       [<ffffffff8108f16f>] ? tick_program_event+0x1f/0x30
       [<ffffffff81153b15>] ? putname+0x35/0x50
       [<ffffffff8147a43c>] call_softirq+0x1c/0x30
       [<ffffffff81004c55>] do_softirq+0xa5/0xe0
       [<ffffffff8105d1ee>] irq_exit+0xae/0xe0
       [<ffffffff8147ac6b>] smp_apic_timer_interrupt+0x6b/0x98
       [<ffffffff81479ab3>] apic_timer_interrupt+0x73/0x80
       <EOI>  [<ffffffff8146aac6>] ? free_debug_processing+0x1a1/0x1d5
       [<ffffffff81153b15>] ? putname+0x35/0x50
       [<ffffffff8146ab2b>] __slab_free+0x31/0x2ca
       [<ffffffff81477c3a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90
       [<ffffffff81253b8f>] ? __debug_check_no_obj_freed+0x15f/0x210
       [<ffffffff81097054>] ? lock_release_nested+0x84/0xc0
       [<ffffffff8113ec55>] ? kmem_cache_free+0x105/0x250
       [<ffffffff81153b15>] ? putname+0x35/0x50
       [<ffffffff81153b15>] ? putname+0x35/0x50
       [<ffffffff8113ed8f>] kmem_cache_free+0x23f/0x250
       [<ffffffff81153b15>] putname+0x35/0x50
       [<ffffffff81146d8d>] do_sys_open+0x16d/0x1d0
       [<ffffffff81146e10>] sys_open+0x20/0x30
       [<ffffffff81478f42>] system_call_fastpath+0x16/0x1b
      Reported-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      d8c7aae6
    • Johannes Berg's avatar
      mac80211: clean up remain-on-channel on interface stop · 71ecfa18
      Johannes Berg authored
      When any interface goes down, it could be the one that we
      were doing a remain-on-channel with. We therefore need to
      cancel the remain-on-channel and flush the related work
      structs so they don't run after the interface has been
      removed or even destroyed.
      
      It's also possible in this case that an off-channel SKB
      was never transmitted, so free it if this is the case.
      Note that this can also happen if the driver finishes
      the off-channel period without ever starting it.
      
      Cc: stable@kernel.org
      Reported-by: default avatarNirav Shah <nirav.j2.shah@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      71ecfa18
    • Johannes Berg's avatar
      mac80211_hwsim: advertise interface combinations · 1ae2fc25
      Johannes Berg authored
      Enforcing interface combinations broke uses of hwsim
      with multiple virtual interfaces. Advertise that all
      combinations are possible to fix this.
      Reported-by: default avatarNirav Shah <nirav.j2.shah@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      1ae2fc25
    • Meenakshi Venkataraman's avatar
      mac80211: fix error in station state transitions during reconfig · bd34ab62
      Meenakshi Venkataraman authored
      As part of hardware reconfig mac80211 tries
      to restore the station state to its values
      before the hardware reconfig, but it only
      goes to the last-state - 1. Fix this
      off-by-one error.
      
      Cc: stable@kernel.org [3.4]
      Signed-off-by: default avatarMeenakshi Venkataraman <meenakshi.venkataraman@intel.com>
      Reviewed-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      bd34ab62
    • Johannes Berg's avatar
      iwlwifi: fix TX power antenna access · a5fdde28
      Johannes Berg authored
      Since my commit
        iwlwifi: use valid TX/RX antenna from hw_params
      the config values are pure overrides, not the
      real values for all hardware. Therefore, the
      EEPROM TX power reading code checks the wrong
      values, it should check the hw_params values.
      
      Cc: stable@kernel.org [3.4]
      Reviewed-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      a5fdde28
    • Chun-Yeow Yeoh's avatar
      mac80211: Fix Unreachable Mesh Station Problem when joining to another MBSS · b8bacc18
      Chun-Yeow Yeoh authored
      Mesh station that joins an MBSS is reachable using mesh portal with 6
      address frame by mesh stations from another MBSS if these two different
      MBSSes are bridged. However, if the mesh station later moves into the
      same MBSS of those mesh stations, it is unreachable by mesh stations
      in the MBSS due to the mpp_paths table is not deleted. A quick fix
      is to perform mesh_path_lookup, if it is available for the target
      destination, mpp_path_lookup is not performed. When the mesh station
      moves back to its original MBSS, the mesh_paths will be deleted once
      expired. So, it will be reachable using mpp_path_lookup again.
      Signed-off-by: default avatarChun-Yeow Yeoh <yeohchunyeow@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      b8bacc18
    • Amitkumar Karwar's avatar
      cfg80211: use sme_state in ibss start/join path · 28f33366
      Amitkumar Karwar authored
      CFG80211_DEV_WARN_ON() at "net/wireless/ibss.c line 63"
      is unnecessarily triggered even after successful connection,
      when cfg80211_ibss_joined() is called by driver inside
      .join_ibss handler.
      
      This patch fixes the problem by changing 'sme_state' in ibss path
      and having WARN_ON() check for 'sme_state' similar to infra
      association.
      Signed-off-by: default avatarAmitkumar Karwar <akarwar@marvell.com>
      Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      28f33366
    • Avinash Patil's avatar
      mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAP · 7a1c9934
      Avinash Patil authored
      mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden
      SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported.
      Signed-off-by: default avatarAvinash Patil <patila@marvell.com>
      Signed-off-by: default avatarKiran Divekar <dkiran@marvell.com>
      Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      7a1c9934
    • Avinash Patil's avatar
      mwifiex: invalidate bss config before setting channel for uAP · f0e3bd23
      Avinash Patil authored
      Mark bss_config parameters as invalid before setting AP channel.
      This prevents from setting invalid parameters while setting AP
      channel to FW.
      Signed-off-by: default avatarAvinash Patil <patila@marvell.com>
      Signed-off-by: default avatarKiran Divekar <dkiran@marvell.com>
      Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      f0e3bd23
    • Stanislaw Gruszka's avatar
      mac80211: run scan after finish connection monitoring · 925e64c3
      Stanislaw Gruszka authored
      commit 133d40f9
      Author: Stanislaw Gruszka <sgruszka@redhat.com>
      Date:   Wed Mar 28 16:01:19 2012 +0200
      
          mac80211: do not scan and monitor connection in parallel
      
      add bug, which make possible to start a scan and never finish it, so
      make every new scanning request finish with -EBUSY error. This can
      happen on code paths where we finish connection monitoring and clear
      IEEE80211_STA_*_POLL flags, but do not check if scan was deferred.
      This patch fixes those code paths.
      Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      925e64c3
  2. 03 Jun, 2012 2 commits
  3. 02 Jun, 2012 18 commits
  4. 01 Jun, 2012 5 commits
    • Linus Torvalds's avatar
      Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6 · 804ce986
      Linus Torvalds authored
      Pull fbdev updates from Florian Tobias Schandinat:
       - driver for AUO-K1900 and AUO-K1901 epaper controller
       - large updates for OMAP (e.g. decouple HDMI audio and video)
       - some updates for Exynos and SH Mobile
       - various other small fixes and cleanups
      
      * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits)
        video: bfin_adv7393fb: Fix cleanup code
        video: exynos_dp: reduce delay time when configuring video setting
        video: exynos_dp: move sw reset prioir to enabling sw defined function
        video: exynos_dp: use devm_ functions
        fb: handle NULL pointers in framebuffer release
        OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request
        OMAPDSS: Apply VENC timings even if panel is disabled
        OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC
        OMAPDSS: DISPC: Support rotation through TILER
        OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n
        OMAPFB: remove compiler warnings when CONFIG_BUG=n
        OMAPDSS: remove compiler warnings when CONFIG_BUG=n
        OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
        OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
        OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods
        OMAPDSS: DISPC: Update Accumulator configuration for chroma plane
        drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
        video: exynos mipi dsi: support reverse panel type
        video: exynos mipi dsi: Properly interpret the interrupt source flags
        video: exynos mipi dsi: Avoid races in probe()
        ...
      804ce986
    • Linus Torvalds's avatar
      Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd · f5e7e844
      Linus Torvalds authored
      Pull mtd update from David Woodhouse:
       - More robust parsing especially of xattr data in JFFS2
       - Updates to mxc_nand and gpmi drivers to support new boards and device tree
       - Improve consistency of information about ECC strength in NAND devices
       - Clean up partition handling of plat_nand
       - Support NAND drivers without dedicated access to OOB area
       - BCH hardware ECC support for OMAP
       - Other fixes and cleanups, and a few new device IDs
      
      Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
      added include files next to each other.
      
      * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
        mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
        mtd: block2mtd: fix recursive call of mtd_writev
        mtd: gpmi-nand: define ecc.strength
        mtd: of_parts: fix breakage in Kconfig
        mtd: nand: fix scan_read_raw_oob
        mtd: docg3 fix in-middle of blocks reads
        mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
        mtd: add fixup for S29NS512P NOR flash.
        jffs2: allow to complete xattr integrity check on first GC scan
        jffs2: allow to discriminate between recoverable and non-recoverable errors
        mtd: nand: omap: add support for hardware BCH ecc
        ARM: OMAP3: gpmc: add BCH ecc api and modes
        mtd: nand: check the return code of 'read_oob/read_oob_raw'
        mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
        mtd: m25p80: Add support for Winbond W25Q80BW
        jffs2: get rid of jffs2_sync_super
        jffs2: remove unnecessary GC pass on sync
        jffs2: remove unnecessary GC pass on umount
        jffs2: remove lock_super
        mtd: gpmi: add gpmi support for mx6q
        ...
      f5e7e844
    • Linus Torvalds's avatar
      Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86 · 48445159
      Linus Torvalds authored
      Pull x86 platform driver updates from Matthew Garrett:
       "Some significant improvements for the Sony driver on newer machines,
        but other than that mostly just minor fixes and a patch to remove the
        broken rfkill code from the Dell driver."
      
      * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (35 commits)
        apple-gmux: Fix up the suspend/resume patch
        dell-laptop: Remove rfkill code
        toshiba_acpi: Fix mis-merge
        dell-laptop: Add touchpad led support for Dell V3450
        acer-wmi: add 3 laptops to video backlight vendor mode quirk table
        sony-laptop: add touchpad enable/disable function
        sony-laptop: add missing Fn key combos for 0x100 handlers
        sony-laptop: add support for more WWAN modems
        sony-laptop: new keyboard backlight handle
        sony-laptop: add high speed battery charging function
        sony-laptop: support automatic resume on lid open
        sony-laptop: adjust error handling in finding SNC handles
        sony-laptop: add thermal profiles support
        sony-laptop: support battery care functions
        sony-laptop: additional debug statements
        sony-laptop: improve SNC initialization and acpi notify callback code
        sony-laptop: use kstrtoul to parse sysfs values
        sony-laptop: generalise ACPI calls into SNC functions
        sony-laptop: fix return path when no ACPI buffer is allocated
        sony-laptop: use soft rfkill status stored in hw
        ...
      48445159
    • Linus Torvalds's avatar
      Merge branch 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux · af4f8ba3
      Linus Torvalds authored
      Pull slab updates from Pekka Enberg:
       "Mainly a bunch of SLUB fixes from Joonsoo Kim"
      
      * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
        slub: use __SetPageSlab function to set PG_slab flag
        slub: fix a memory leak in get_partial_node()
        slub: remove unused argument of init_kmem_cache_node()
        slub: fix a possible memory leak
        Documentations: Fix slabinfo.c directory in vm/slub.txt
        slub: fix incorrect return type of get_any_partial()
      af4f8ba3
    • H. Peter Anvin's avatar