Merge tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt7623: add USB nodes
mt7629: update PCIe node to new format

* tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: arm: Add MT6589 Fairphone 1
  ARM: dts: mediatek: Update MT7629 PCIe node for new format
  arm: dts: mt7623: add otg nodes for bpi-r2
  arm: dts: mt7623: add musb device nodes

Link: https://lore.kernel.org/r/7135d46f-5fb9-b46d-96d4-3b38548fe23e@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.16-rc1

This enables additional interrupts on the Tegra194 GPIO controller for
better load balancing and/or virtualization, adds audio support on
Jetson TX2 NX, enables the NVDEC video decoder on Tegra186 and later and
enables more audio processors that are found on Tegra210 and later.

Various cleanups across the board top things off.

* tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Fix pcie-ep DT nodes
  arm64: tegra: Remove useless usb-ehci compatible string
  arm64: tegra: Extend APE audio support on Jetson platforms
  arm64: tegra: Add few AHUB devices for Tegra210 and later
  arm64: tegra: Remove unused backlight-boot-off property
  arm64: tegra: Add NVDEC to Tegra186/194 device trees
  arm64: tegra: Add new USB PHY properties on Tegra132
  arm64: tegra: Update HDA card name on Jetson TX2 NX
  arm64: tegra: Audio graph sound card for Jetson TX2 NX
  arm64: tegra: Add additional GPIO interrupt entries on Tegra194

Link: https://lore.kernel.org/r/20211008201132.1678814-7-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.16-rc1

This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.

* tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: PCI: tegra194: Fix PCIe endpoint node names
  dt-bindings: Add YAML bindings for NVDEC

Link: https://lore.kernel.org/r/20211008201132.1678814-2-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add basic DT to support Unisoc's UMS512, with this patch,
the board ums512-1h10 can run into console.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20211008034533.343167-3-zhang.lyra@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Added bindings for Unisoc's ums512-1h10 board and ums512 SoC.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211008034533.343167-2-zhang.lyra@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-arm64-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changes for v5.16:
- New Boards (with bindings):
  - Radxa Zero
  - Jethub D1 & H1 home automation controllers
- Misc Changes:
  - add Ethernet PHY reset line for ODROID-C4/HC4
  - add audio playback nodes to rbox-pro
  - Fix the pwm regulator supply properties
  - meson-g12b-odroid-n2: add missing 5v regulator gpio

* tag 'amlogic-arm64-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio
  arm64: dts: meson-sm1: Fix the pwm regulator supply properties
  arm64: dts: meson-g12b: Fix the pwm regulator supply properties
  arm64: dts: meson-g12a: Fix the pwm regulator supply properties
  arm64: dts: meson: add audio playback to rbox-pro
  arm64: dts: meson-axg: add support for JetHub D1
  arm64: dts: meson-gxl: add support for JetHub H1
  dt-bindings: vendor-prefixes: add jethome prefix
  dt-bindings: arm: amlogic: add bindings for Jethub D1/H1
  arm64: dts: amlogic: add support for Radxa Zero
  dt-bindings: arm: amlogic: add support for Radxa Zero
  arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4

Link: https://lore.kernel.org/r/cc0a3af0-b1b1-dbe1-f553-cf58a1c63d0b@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: ZynqMP DT changes for v5.16-v2

- Add support for Kria SOM board

* tag 'zynqmp-dt-for-v5.16-v2' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Add support for Xilinx Kria SOM board

Link: https://lore.kernel.org/r/9815867c-ffbb-fc9d-64b9-badee5e2862b@xilinx.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add the compatible for Fairphone 1 smartphone with MT6589 SoC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211005202833.96526-1-luca@z3ntu.xyzSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:

	properties:
	  $nodename:
	    pattern: "^pcie-ep@"

Change the existing ones in the DT bindings examples to avoid warnings
during DT bindings validation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:

	properties:
	  $nodename:
	    pattern: "^pcie-ep@"

Change the existing ones in order to avoid those warnings:

	arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
	arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
		From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

There's no such thing as a generic USB EHCI controller. The EHCI
controllers found on Tegra SoCs are instantiations that need Tegra-
specific glue to work properly, so drop the generic compatible string
and keep only the Tegra-specific ones.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Extend APE audio support by adding more audio components such as SFC,
MVC, AMX, ADX and Mixer. These components can be plugged into an audio
path and required processing can be done. ASoC audio-graph based sound
driver is used to facilitate this and thus extend sound bindings as
well.

The components in the path may require different PCM parameters (such
as sample rate, channels or sample size). Depending on the pre-defined
audio paths, these can be statically configured with "convert-xxx" DT
properties in endpoint subnode. The support for the rate and channel
conversion is already available in generic audio-graph driver. Sample
size conversion support can be added based on the need in future.

The support is extended for following platforms:
 * Jertson TX1
 * Jetson Nano
 * Jetson TX2
 * Jetson AGX Xavier
 * Jetson Xavier NX
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add DT nodes for following AHUB devices:
 * SFC (Sampling Frequency Converter)
 * MVC (Master Volume Control)
 * AMX (Audio Multiplexer)
 * ADX (Audio Demultiplexer)
 * Mixer

Above devices are added for Tegra210, Tegra186 and Tegra194 generations
of Tegra SoC.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The backlight-boot-off property was proposed as a patch, but ended not
being accepted since different solution was already in the place:

    https://patchwork.kernel.org/project/linux-arm-kernel/patch/1406806970-12561-1-git-send-email-thierry.reding@gmail.com/#21327479Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add a device tree node for NVDEC on Tegra186, and
device tree nodes for NVDEC and NVDEC1 on Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add YAML device tree bindings for NVDEC, now in a more appropriate
place compared to the old textual Host1x bindings.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.16

  - Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
    H3Ne SoCs and boards.

* tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards

Link: https://lore.kernel.org/r/cover.1633081158.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.16

  - I2C EEPROM support on the RZA2MEVB development board,
  - DMA, USB2.0, and audio support for the RZ/G2L SoC,
  - USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
    development board,
  - Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
    H3Ne),
  - PWM support for the R-Car M3-W+ and V3U SoCs,
  - IPMMU support for SDHI on the R-Car V3U SoC,
  - Switches support for the Falcon development board,
  - Improve Ethernet PHY descriptions to fix reset handling after kexec,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (45 commits)
  arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets
  ARM: dts: rzg1: Add missing Ethernet PHY resets
  ARM: dts: r-mobile: Add missing Ethernet PHY resets
  arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
  arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
  arm64: dts: renesas: Add compatible properties to AR8031 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to RTL8201FL Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ8081 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs
  arm64: dts: renesas: beacon: Fix Ethernet PHY mode
  ARM: dts: renesas: Fix SMSC Ethernet compatible values
  arm64: dts: renesas: rzg2l-smarc: Enable CANFD
  arm64: dts: renesas: rzg2l-smarc-som: Enable ADC on SMARC platform
  arm64: dts: renesas: rzg2l-smarc-som: Move extal and memory nodes to SOM DTSI
  arm64: dts: renesas: r8a779a0: falcon-cpu: Add SW47-SW49 support
  arm64: dts: renesas: rzg2l-smarc: Add Mic routing
  arm64: dts: renesas: rzg2l-smarc: Enable audio
  ...

Link: https://lore.kernel.org/r/cover.1633081147.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.16-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

ADC-keys for the mk808 board and a number of further cleanups
to make dt-schema happier.

* tag 'v5.16-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: swap timer clock-names
  ARM: dts: rockchip: add more angle brackets to operating-points property on rk3066a
  ARM: dts: rockchip: rename opp-table node names
  ARM: dts: rockchip: change rv1108 gmac nodename
  ARM: dts: rockchip: add adc-keys node to rk3066a-mk808

Link: https://lore.kernel.org/r/5121280.Lt9SDvczpP@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

This contains the parts that were originally meant for 5.15 + some
new thing:

New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)

Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.

Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.

SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)

Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.

A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.

* tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (65 commits)
  arm64: dts: rockchip: add phandles to muxed i2c buses on rk3368-lion
  arm64: dts: rockchip: define iodomains for rk3368-lion
  arm64: dts: rockchip: fix LDO_REG4 / LDO_REG7 confusion on rk3368-lion
  arm64: dts: rockchip: align operating-points table name with dtschema
  arm64: dts: rockchip: hook up camera on px30-evb
  arm64: dts: rockchip: add isp node for px30
  arm64: dts: rockchip: add Coresight debug range for RK3399
  arm64: dts: rockchip: Correct regulator for USB host on Odroid-Go2
  arm64: dts: rockchip: fix PCI reg address warning on rk3399-gru
  arm64: dts: rockchip: add saradc to rk3568-evb1-v10
  arm64: dts: rockchip: Fix GPU register width for RK3328
  arm64: dts: rockchip: Re-add interrupt-names for RK3399's vpu
  arm64: dts: rockchip: add missing rockchip,grf property to rk356x
  arm64: dts: rockchip: add RK3399 Gru gpio-line-names
  arm64: dts: rockchip: Enable SFC for Odroid Go Advance
  arm64: dts: rockchip: Add SFC to RK3308
  arm64: dts: rockchip: Add SFC to PX30
  arm64: dts: rockchip: add thermal support to Quartz64 Model A
  arm64: dts: rockchip: add rk3568 tsadc nodes
  arm64: dts: rockchip: add rk356x gpio debounce clocks
  ...

Link: https://lore.kernel.org/r/4439872.CQOukoFCf9@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: ZynqMP DT changes for v5.16

- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches

* tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx: (36 commits)
  arm64: zynqmp: Wire psgtr for zc1751-xm013
  arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
  arm64: zynqmp: Enable gpio and qspi for zc1275-revA
  arm64: zynqmp: Fix serial compatible string
  arm64: zynqmp: Remove not documented is-dual property
  arm64: zynqmp: Add psgtr description to zc1751 dc1 board
  arm64: zynqmp: Add support for zcu102-rev1.1 board
  arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
  arm64: zynqmp: Sync psgtr node location with zcu104-revA
  arm64: zynqmp: Add reset description for sata
  arm64: zynqmp: Move rtc to different location on zcu104-revA
  arm64: zynqmp: Wire qspi on multiple boards
  arm64: zynqmp: Remove information about dma clock on zcu106
  arm64: zynqmp: Update rtc calibration value
  arm64: zynqmp: Add note about UHS mode on some boards
  arm64: zynqmp: Move DP nodes to the end of file on zcu106
  arm64: zynqmp: Remove can aliases from zc1751
  arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout value
  arm64: zynqmp: List reset property for ethernet phy
  arm64: zynqmp: Add nvmem alises for eeproms
  ...

Link: https://lore.kernel.org/r/b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.euSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

There are couple of revisions of SOMs (k26) and associated carrier cards
(kv260).
SOM itself has two major versions:
sm-k26 - SOM with EMMC
smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
in QSPI.

SOMs are describing only devices available on the SOM or connections which
are described in specification (for example UART, fwuen).

When SOM boots out of QSPI it uses limited number of peripherals defined by
the specification and present in sm(k)-k26 dtses.
Then a carrier card (CC) detection is happening and DT overlay is applied
to brings new functionality. That's why DT overlays are used. The name is
composed together with SOM name and CC name that's why DT overlays with
these names are generated to make sure they can be used together.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com

Describe all Ethernet PHY reset GPIOs on R-Car Gen3 boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3e6fd765850e8ef0980d8e98bc5f2126538d626f.1631177442.git.geert+renesas@glider.be

Describe all Ethernet PHY reset GPIOs on RZ/G1 boards, to avoid relying
solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e20b3643b4dc5f6c2a9e19d9544495c06075d9ff.1631177442.git.geert+renesas@glider.be

Describe all Ethernet PHY reset GPIOs on R-Mobile boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b41bf0098ff193fbff9fad04d00075ce1bea1986.1631177442.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on R-Car Gen3 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Atheros
AR8031 PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/3f1b58756f149f0c634c66abaecc88e699f4c3cc.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Renesas
uPD60610 or uPD60611 PHYs on RZ/A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/335a1dfea905369da683e122e41e08ca1c5f90f7.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8201FL PHYs on RZ/A2 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/a23eca16869457684b0300379233e335b4e2047e.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing SMSC
LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/247dc2074dae149af07b6d014985ad30eb362eda.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8081 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ec5c7dadf3c0fe5e47dfbae72fb435047203ad06.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be

While networking works fine in RGMII mode when using the Linux generic
PHY driver, it fails when using the Atheros PHY driver.
Fix this by correcting the Ethernet PHY mode to RGMII-RXID, which works
fine with both drivers.

Fixes: a5200e63 ("arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling")
Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4c15b2df23bb63f15abf9dfb88860477f4f523.1632465965.git.geert+renesas@glider.be

According to schematics, and confirmed by ID_REV register contents, the
Ethernet controllers on various development board are not SMSC LAN9220,
but different variants:
  - KZM-A9-Dual and KZM-A9-GT: LAN9221,
  - Bock-W and Marzen: LAN89218AQ.

Update the compatible values accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59c142176f795b3541c935df43ab11cecd77cc61.1631173813.git.geert+renesas@glider.be

Pull ksmbd fixes from Steve French:
 "Five fixes for the ksmbd kernel server, including three security
  fixes:

   - remove follow symlinks support

   - use LOOKUP_BENEATH to prevent out of share access

   - SMB3 compounding security fix

   - fix for returning the default streams correctly, fixing a bug when
     writing ppt or doc files from some clients

   - logging more clearly that ksmbd is experimental (at module load
     time)"

* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use LOOKUP_BENEATH to prevent the out of share access
  ksmbd: remove follow symlinks support
  ksmbd: check protocol id in ksmbd_verify_smb_message()
  ksmbd: add default data stream name in FILE_STREAM_INFORMATION
  ksmbd: log that server is experimental at module load

Pull EDAC fixes from Borislav Petkov:
 "Fix two EDAC drivers using the wrong value type for the DIMM mode"

* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/dmc520: Assign the proper type to dimm->edac_mode
  EDAC/synopsys: Fix wrong value type assignment for edac_mode