- 16 Sep, 2014 8 commits
-
-
Lorenzo Bianconi authored
Add ack_to entry to debugfs in order to dump current ACK timeout value Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Lorenzo Bianconi authored
Set control frame bit in rx filter if dynack processing has been activated in order to enable ACK frame reception Signed-off-by:
-
Lorenzo Bianconi authored
Add sampling methods for ACK RX timestamp in ath_rx_tasklet() and for TX frame timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer(). These samples will be used in dynack processing for ACK timeout estimation Signed-off-by:
-
Lorenzo Bianconi authored
Do not overwrite ACK timeout estimation in ath9k_hw_init_global_settings() if dynack processing has been enabled Signed-off-by:
-
Lorenzo Bianconi authored
Add ACK timeout estimation algorithm to ath9k Makefile and Kconfig Signed-off-by:
-
Lorenzo Bianconi authored
Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp, TX frame timestamp and frame duration. Signed-off-by:
Philippe Duchein <wireless-dev@duchein.net> Signed-off-by:
-
Lorenzo Bianconi authored
Add duration field to ath_tx_status in order to report frame duration for each entry in multi-retry chain. These fields will be used in ACK timeout estimation algorithm (dynack) Signed-off-by:
-
Lorenzo Bianconi authored
Remove static keyword and export ath9k_hw_setslottime(), ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These methods will be used in ACK timeout estimation algorithm (dynack) Signed-off-by:
-
- 15 Sep, 2014 32 commits
-
-
Sujith Manoharan authored
Assign 'primary_sta' to the active primary station interface after iterating over the list of interfaces. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
The opmode is verified to be NL80211_IFTYPE_STATION before calling ath9k_set_assoc_state(). Signed-off-by:
-
Sujith Manoharan authored
When switching offchannel, BSS related information in the HW has to be reset to default values. Add a routine to do this. Signed-off-by:
-
Sujith Manoharan authored
In MCC mode, the TSF of a context needs to be adjusted only if it is GO/AP. Signed-off-by:
-
Sujith Manoharan authored
The next_tbtt variable in the scheduler is needed only for GO/AP mode operation and is always read from the NEXT_TBTT_TIMER in the HW. There is no need to store the timestamp for received beacons. Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
Some constants were missing and are added now. The rate mode was renamed, at least the ucode in brcsmac uses 2 for HT rates (iee80211n) and the more recent ucodes are using 3 for VHT (ieee80211ac). Signed-off-by:
-
Hauke Mehrtens authored
The OFDM reate 9MB was not set here Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
This is based on code form brcmsmac. Signed-off-by:
-
Vladimir Kondratiev authored
Use empty inline functions instead of empty #define. Fix for "unused variable" as reported below: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 167bf96d commit: 871d8c4b [45/62] wil6210: fix usage of print_hex_dump_debug config: i386-allyesconfig reproduce: git checkout 871d8c4b make ARCH=i386 allyesconfig make ARCH=i386 All warnings: drivers/net/wireless/ath/wil6210/wmi.c: In function 'wmi_evt_rx_mgmt': >> drivers/net/wireless/ath/wil6210/wmi.c:341:10: warning: unused variable 'ie_len' [-Wunused-variable] size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, ^ >> drivers/net/wireless/ath/wil6210/wmi.c:340:13: warning: unused variable 'ie_buf' [-Wunused-variable] const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; ^ vim +/ie_len +341 drivers/net/wireless/ath/wil6210/wmi.c 2be7d22f Vladimir Kondratiev 2012-12-20 334 2be7d22f Vladimir Kondratiev 2012-12-20 335 if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { 2be7d22f Vladimir Kondratiev 2012-12-20 336 struct cfg80211_bss *bss; 8eea944a Vladimir Kondratiev 2014-06-16 337 u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); 8eea944a Vladimir Kondratiev 2014-06-16 338 u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); 8eea944a Vladimir Kondratiev 2014-06-16 339 u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); 8eea944a Vladimir Kondratiev 2014-06-16 340 const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; 8eea944a Vladimir Kondratiev 2014-06-16 341 size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, 8eea944a Vladimir Kondratiev 2014-06-16 342 u.beacon.variable); 8eea944a Vladimir Kondratiev 2014-06-16 343 wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap); 8eea944a Vladimir Kondratiev 2014-06-16 344 wil_dbg_wmi(wil, "TSF : 0x%016llx\n", tsf); :::::: The code at line 341 was first introduced by commit :::::: 8eea944a wil6210: print more info about BSS found Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
-
Fabian Frederick authored
Use container_of instead of casting first structure member. Compiled but untested. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Fabian Frederick authored
Use container_of instead of casting first structure member. Compiled but untested. Signed-off-by:
-
Larry Finger authored
Macros CL_SNPRINTF and CL_PRINTF are always used in that order. The first formats info into a buffer, and the second dumps it with printk. As the debug system in rtlwifi has a macro that does this with a single call, it seems reasonable to use it instead. An additional benefit is that the debug level can be set when loading the driver used by the wifi device. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Rafał Miłecki authored
We should reset PLL after changing MAC frequency. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Avinash Patil authored
This patch sets uAP BA window sizes to 64. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch adds RX work queue support to mwifiex. Packets received are queued to internal queue which are then processed by scheduling a work item for RX process. RX work is enabled only on SMP systems. Reviewed-by:
James Cameron <quozl@laptop.org> Signed-off-by:
Marc Yang <yangyang@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
We have a logic in driver to delay or abort low priority scan to serve Tx traffic effectively. With scan channel gap support added, firmware now allows driver to send Tx data while scan operation is in progress. Hence low priority scan handling in driver is not required now. This patch removes related code. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
This variable is never used, get rid of it. Signed-off-by:
-
Avinash Patil authored
With channel scan gap, FW comes back to connected channel after each single channel scan. So we can safely transfer data to FW during scan. FW would send this data once on connected channel. Signed-off-by:
-
Avinash Patil authored
With scan channel gap in place, FW comes back to connected channel after each scan; so we dont need to restrict FW to scan single channel while connected. Signed-off-by:
-
Avinash Patil authored
With scan channel gap when any station/AP is active, FW comes back to connected channel for any pending data transfter after scanning each channel. We set scan channel gap TLV to FW in scan command when any of the interface is active. This enables scan channel gap in FW. Also when scan channel gap is enabled, we would scan maximum channels allowed by FW. Scan channel gap is supported only on FW with V15 FW API. Signed-off-by:
-
Avinash Patil authored
It was observed that station would sent probe request even when scan type has been set as passive during iw scan. This was happening because driver sets passive scan type only when channel has IEEE80211_CHAN_NO_IR flag set. Along with this, add condition to check if no ssids are specified in scan request so as to mark such scan request passive. Signed-off-by:
-
Amitkumar Karwar authored
'mp_data_port_mask' and 'mp_end_port' gives correct information even for the chipsets supporting SDIO new mode (32 ports). We will get rid of this chip specific handling. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
When aggregation port limit is reached, we stop aggregation and the data is sent to firmware. It is observed that one less packet than the port limit is aggregated in this case. ex. 15 instead of 16. The reason is we have redundant port limit checks before current packet is added to aggregation buffer. The issue is fixed by removing these checks. We already have necessary check in precopy current buffer handling. Signed-off-by:
-
Xinming Hu authored
When assocaiting to an AP , mwifiex set supported data rates based on target AP's capability. For 5G AP(11a mode), a/n/ac mode would possibly be set. However, for some chips which dont support 11AC mode current config_bands will be used instead. For example, if we join an IBSS in 11b mode ,adapter->config_bands will be set to 1(11b mode). Then we leave IBSS ,and try to connect 5G a/n mode AP. At this time , only 11b mode data rates will be supported in assoc request , which result in assoc failure with reason code 18: Association denied due to requesting station not supporting all rates. This patch fix such a cornel case, by adding additional check for current chip's 11ac capability. Reported-by:
Andreas Fenkart <afenkart@gmail.com> Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch adds support for writing CPU event interrupt done back to device. Patch also increases interrupt buffer ring size from 4 to 8. Signed-off-by:
-
Avinash Patil authored
There was an issue with internal scan during association wherein we would complete internal scan on first scan command response. This would cause association failure if AP is not found in first scan response e.g. APs from A band. This patch fixes this issue by completing internal scan only when all scan commands from scan pending queue and command pending queue are sent to FW and response to last scan command is received. Tested-by:
-
Avinash Patil authored
If rx_len received in interface header from FW is more than RX buffer size, skb_put for such length results into skb_panic. Avoid this by not processing such packets. We just print a warning for such packets and free skb. Reviewed-by:
Paul Stewart <pstew@chromium.org> Signed-off-by:
-
Avinash Patil authored
Size of RSN IE buffer in driver is 254 while maximum size of received buffer to be copied to RSN IE buffer can be 255. Add boundary check to copy maximum of 254 bytes into RSN IE buffer. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Avinash Patil authored
If we dont set FW API info here, for older FW releases where FW API is not available in GET_HW_SPEC, API version would remain 0. This may cause issues with 11ac if older FW is used with newer driver. Signed-off-by:
-
Rafał Miłecki authored
Previous values were extracted from MMIO dump of some old 5.x driver, new ones should improve calibration. This also adds values for 5 GHz. Signed-off-by:
-
