- 29 Mar, 2021 8 commits
-
-
Jacek Bułatek authored
Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208 ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com> Co-developed-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dave Ertman authored
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013e ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Bruce Allan authored
Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c38904 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Krzysztof Goreczny authored
There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Chinh T Cao authored
iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff1 ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Fabio Pricoco authored
250 msec timeout is insufficient for some AQ commands. Advice from FW team was to increase the timeout. Increase to 1 second. Fixes: 7ec59eea ("ice: Add support for control queues") Signed-off-by: Fabio Pricoco <fabio.pricoco@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Anirudh Venkataramanan authored
An incorrect NVM update procedure can result in the driver failing probe. In this case, the recommended resolution method is to update the NVM using the right procedure. However, if the driver fails probe, the user will not be able to update the NVM. So do not fail probe on link/PHY errors. Fixes: 1a3571b5 ("ice: restore PHY settings on media insertion") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Lv Yunlong authored
In pvc_xmit, if __skb_pad(skb, pad, false) failed, it will free the skb in the first time and goto drop. But the same skb is freed by kfree_skb(skb) in the second time in drop. Maintaining the original function unchanged, my patch adds a new label out to avoid the double free if __skb_pad() failed. Fixes: f5083d0c ("drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Mar, 2021 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-25 This series contains updates to virtchnl header file and i40e driver. Norbert removes added padding from virtchnl RSS structures as this causes issues when iterating over the arrays. Mateusz adds Asym_Pause as supported to allow these settings to be set as the hardware supports it. Eryk fixes an issue where encountering a VF reset alongside releasing VFs could cause a call trace. Arkadiusz moves TC setup before resource setup as previously it was possible to enter with a null q_vector causing a kernel oops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This fixes following syzbot report: UBSAN: shift-out-of-bounds in ./include/net/red.h:237:23 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 8418 Comm: syz-executor170 Not tainted 5.12.0-rc4-next-20210324-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_set_parms include/net/red.h:237 [inline] choke_change.cold+0x3c/0xc8 net/sched/sch_choke.c:414 qdisc_create+0x475/0x12f0 net/sched/sch_api.c:1247 tc_modify_qdisc+0x4c8/0x1a50 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x43f039 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdfa725168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043f039 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 0000000000403020 R08: 0000000000400488 R09: 0000000000400488 R10: 0000000000400488 R11: 0000000000000246 R12: 00000000004030b0 R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488 Fixes: 8afa10cb ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Antoine Tenart says: ==================== net: do not modify the shared tunnel info when PMTU triggers an ICMP reply The series fixes an issue were a shared ip_tunnel_info is modified when PMTU triggers an ICMP reply in vxlan and geneve, making following packets in that flow to have a wrong destination address if the flow isn't updated. A detailled information is given in each of the two commits. This was tested manually with OVS and I ran the PTMU selftests with kmemleak enabled (all OK, none was skipped). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: c1a800e8 ("geneve: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: fc68c995 ("vxlan: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xiaoming Ni says: ==================== nfc: fix Resource leakage and endless loop fix Resource leakage and endless loop in net/nfc/llcp_sock.c, reported by "kiyin(尹亮)". Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 ==================== math: Export mul_u64_u64_div_u64 Fixes: f51d7bf1 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiaoming Ni authored
When sock_wait_state() returns -EINPROGRESS, "sk->sk_state" is LLCP_CONNECTING. In this case, llcp_sock_connect() is repeatedly invoked, nfc_llcp_sock_link() will add sk to local->connecting_sockets twice. sk->sk_node->next will point to itself, that will make an endless loop and hang-up the system. To fix it, check whether sk->sk_state is LLCP_CONNECTING in llcp_sock_connect() to avoid repeated invoking. Fixes: b4011239 ("NFC: llcp: Fix non blocking sockets connections") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.11 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiaoming Ni authored
In llcp_sock_connect(), use kmemdup to allocate memory for "llcp_sock->service_name". The memory is not released in the sock_unlink label of the subsequent failure branch. As a result, memory leakage occurs. fix CVE-2020-25672 Fixes: d646960f ("NFC: Initial LLCP support") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.3 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiaoming Ni authored
nfc_llcp_local_get() is invoked in llcp_sock_connect(), but nfc_llcp_local_put() is not invoked in subsequent failure branches. As a result, refcount leakage occurs. To fix it, add calling nfc_llcp_local_put(). fix CVE-2020-25671 Fixes: c7aa1225 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.6 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiaoming Ni authored
nfc_llcp_local_get() is invoked in llcp_sock_bind(), but nfc_llcp_local_put() is not invoked in subsequent failure branches. As a result, refcount leakage occurs. To fix it, add calling nfc_llcp_local_put(). fix CVE-2020-25670 Fixes: c7aa1225 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.6 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Mar, 2021 22 commits
-
-
Shyam Sundar S K authored
Based on the IOMMU configuration, the current cache control settings can result in possible coherency issues. The hardware team has recommended new settings for the PCI device path to eliminate the issue. Fixes: 6f595959 ("amd-xgbe: Adjust register settings to improve performance") Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Blumenstingl authored
The xMII interface clock depends on the PHY interface (MII, RMII, RGMII) as well as the current link speed. Explicitly configure the GSWIP to automatically select the appropriate xMII interface clock. This fixes an issue seen by some users where ports using an external RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most likely this is due to an "invalid" xMII clock being selected either by the bootloader or hardware-defaults. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dinh Nguyen authored
Correct the Micrel phy documentation for the ksz9021 and ksz9031 phys for how the phy skews are set. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Mack authored
In setups with fixed-link settings there is no mdio node in DTS. axienet_probe() already handles that gracefully but lp->mii_bus is then NULL. Fix code that tries to blindly grab the MDIO lock by introducing two helper functions that make the locking conditional. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
DSA is aware of switches with global VLAN filtering since the blamed commit, but it makes a bad decision when multiple bridges are spanning the same switch: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 ip link set swp4 master br1 ip link set swp5 master br1 ip link set swp5 nomaster ip link set swp4 nomaster [138665.939930] sja1105 spi0.1: port 3: dsa_core: VLAN filtering is a global setting [138665.947514] DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE When all ports leave br1, DSA blindly attempts to disable VLAN filtering on the switch, ignoring the fact that br0 still exists and is VLAN-aware too. It fails while doing that. This patch checks whether any port exists at all and is under a VLAN-aware bridge. Fixes: d371b7c9 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadiusz Kubalewski authored
Setup TC before the i40e_setup_pf_switch() call. Memory must be initialized for all the queues before using its resources. Previously it could be possible that a call: xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev, rx_ring->queue_index, rx_ring->q_vector->napi.napi_id); was made with q_vector being null. Oops could show up with the following sequence: - no driver loaded - FW LLDP agent is on (flag disable-fw-lldp:off) - link is up - DCB configured with number of Traffic Classes that will not divide completely the default number of queues (usually cpu cores) - driver load - set private flag: disable-fw-lldp:on Fixes: 4b208eaa ("i40e: Add init and default config of software based DCB") Fixes: b02e5a0e ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Eryk Rybak authored
Fix the reason of kernel oops when i40e driver removed VFs. Added new __I40E_VFS_RELEASING state to signalize releasing process by PF, that it makes possible to exit of reset VF procedure. Without this patch, it is possible to suspend the VFs reset by releasing VFs resources procedure. Retrying the reset after the timeout works on the freed VF memory causing a kernel oops. Fixes: d43d60e5 ("i40e: ensure reset occurs when disabling VF") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (hugetlb, kasan, gup, selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64, gcov, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: update Andrey Konovalov's email address mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm: memblock: fix section mismatch warning again kfence: make compatible with kmemleak gcov: fix clang-11+ support ia64: fix format strings for err_inject ia64: mca: allocate early mca with GFP_ATOMIC squashfs: fix xattr id and id lookup sanity checks squashfs: fix inode lookup sanity checks z3fold: prevent reclaim/free race for headless pages selftests/vm: fix out-of-tree build mm/mmu_notifiers: ensure range_end() is paired with range_start() kasan: fix per-page tags for non-page_alloc pages hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Not much going on, just some small bug fixes: - Typo causing a regression in mlx5 devx - Regression in the recent hns rework causing the HW to get out of sync - Long-standing cxgb4 adaptor crash when destroying cm ids" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server RDMA/hns: Fix bug during CMDQ initialization RDMA/mlx5: Fix typo in destroy_mkey inbox
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull mfs fix from Lee Jones: "Unconstify editable placeholder structures" * tag 'mfd-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Minor fixes all over, ranging from typos to tests to errata workarounds: - Fix possible memory hotplug failure with KASLR - Fix FFR value in SVE kselftest - Fix backtraces reported in /proc/$pid/stack - Disable broken CnP implementation on NVIDIA Carmel - Typo fixes and ACPI documentation clarification - Fix some W=1 warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: disable CNP on Carmel arm64/process.c: fix Wmissing-prototypes build warnings kselftest/arm64: sve: Do not use non-canonical FFR register value arm64: mm: correct the inside linear map range during hotplug check arm64: kdump: update ppos when reading elfcorehdr arm64: cpuinfo: Fix a typo Documentation: arm64/acpi : clarify arm64 support of IBFT arm64: stacktrace: don't trace arch_stack_walk() arm64: csum: cast to the proper type
-
Chris Chiu authored
Redirect my older email addresses in the git logs. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mateusz Palczewski authored
Add Asym_Pause to supported link modes (it is supported by HW). Lack of Asym_Pause in supported modes can cause several problems, i.e. it won't be possible to turn the autonegotiation on with asymmetric pause settings (i.e. Tx on, Rx off). Fixes: 4e91bcd5 ("i40e: Finish implementation of ethtool get settings") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Norbert Ciosek authored
Remove padding from RSS structures. Previous layout could lead to unwanted compiler optimizations in loops when iterating over key and lut arrays. Fixes: 65ece6de ("virtchnl: Add missing explicit padding to structures") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Andrey Konovalov authored
Use my personal email, the @google.com one will stop functioning soon. Link: https://lkml.kernel.org/r/ead0e9c32a2f70e0bde6f63b3b9470e0ef13d2ee.1616107969.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ira Weiny authored
The kernel test robot found that __kmap_local_sched_out() was not correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was set.[1] This was due to DEBUG_HIGHMEM check being used. Change the configuration check to be correct. [1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com Fixes: 0e91a0c6 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oliver Sang <oliver.sang@intel.com> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Cc: David Sterba <dsterba@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
Commit 34dc2efb ("memblock: fix section mismatch warning") marked memblock_bottom_up() and memblock_set_bottom_up() as __init, but they could be referenced from non-init functions like memblock_find_in_range_node() on architectures that enable CONFIG_ARCH_KEEP_MEMBLOCK. For such builds kernel test robot reports: WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up() The function memblock_find_in_range_node() references the function __init memblock_bottom_up(). This is often because memblock_find_in_range_node lacks a __init annotation or the annotation of memblock_bottom_up is wrong. Replace __init annotations with __init_memblock annotations so that the appropriate section will be selected depending on CONFIG_ARCH_KEEP_MEMBLOCK. Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org Fixes: 34dc2efb ("memblock: fix section mismatch warning") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marco Elver authored
Because memblock allocations are registered with kmemleak, the KFENCE pool was seen by kmemleak as one large object. Later allocations through kfence_alloc() that were registered with kmemleak via slab_post_alloc_hook() would then overlap and trigger a warning. Therefore, once the pool is initialized, we can remove (free) it from kmemleak again, since it should be treated as allocator-internal and be seen as "free memory". The second problem is that kmemleak is passed the rounded size, and not the originally requested size, which is also the size of KFENCE objects. To avoid kmemleak scanning past the end of an object and trigger a KFENCE out-of-bounds error, fix the size if it is a KFENCE object. For simplicity, to avoid a call to kfence_ksize() in slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK) guard), just call kfence_ksize() in mm/kmemleak.c:create_object(). Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.comSigned-off-by: Marco Elver <elver@google.com> Reported-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Luis Henriques <lhenriques@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Desaulniers authored
LLVM changed the expected function signatures for llvm_gcda_start_file() and llvm_gcda_emit_function() in the clang-11 release. Users of clang-11 or newer may have noticed their kernels failing to boot due to a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y. Fix up the function signatures so calling these functions doesn't panic the kernel. Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041 Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44 Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Prasad Sodagudi <psodagud@quicinc.com> Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: <stable@vger.kernel.org> [5.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergei Trofimovich authored
Fix warning with %lx / u64 mismatch: arch/ia64/kernel/err_inject.c: In function 'show_resources': arch/ia64/kernel/err_inject.c:62:22: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' {aka 'long long unsigned int'} 62 | return sprintf(buf, "%lx", name[cpu]); \ | ^~~~~~~ Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.orgSigned-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergei Trofimovich authored
The sleep warning happens at early boot right at secondary CPU activation bootup: smp: Bringing up secondary CPUs ... BUG: sleeping function called from invalid context at mm/page_alloc.c:4942 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99 .. Call Trace: show_stack+0x90/0xc0 dump_stack+0x150/0x1c0 ___might_sleep+0x1c0/0x2a0 __might_sleep+0xa0/0x160 __alloc_pages_nodemask+0x1a0/0x600 alloc_page_interleave+0x30/0x1c0 alloc_pages_current+0x2c0/0x340 __get_free_pages+0x30/0xa0 ia64_mca_cpu_init+0x2d0/0x3a0 cpu_init+0x8b0/0x1440 start_secondary+0x60/0x700 start_ap+0x750/0x780 Fixed BSP b0 value from CPU 1 As I understand interrupts are not enabled yet and system has a lot of memory. There is little chance to sleep and switch to GFP_ATOMIC should be a no-op. Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.orgSigned-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Phillip Lougher authored
The checks for maximum metadata block size is missing SQUASHFS_BLOCK_OFFSET (the two byte length count). Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk Fixes: f37aa4c7 ("squashfs: add more sanity checks in id lookup") Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Sean Nyekjaer <sean@geanix.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-