- 05 Oct, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "This fixes a code ordering issue in the main suspend-to-idle loop that causes some "low power S0 idle" conditions to be incorrectly reported as unmet with suspend/resume debug messages enabled" * tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / s2idle: Invoke the ->wake() platform callback earlier
-
Rafael J. Wysocki authored
* pm-sleep: PM / s2idle: Invoke the ->wake() platform callback earlier
-
Linus Torvalds authored
Merge tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for the alignment of the event number reported at the end of the 'DM_LIST_DEVICES' ioctl. - a couple stable fixes for the DM crypt target. - a DM raid health status reporting fix. * tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix incorrect status output at the end of a "recover" process dm crypt: reject sector_size feature if device length is not aligned to it dm crypt: fix memory leak in crypt_ctr_cipher_old() dm ioctl: fix alignment of event number in the device list
-
Jonathan Brassow authored
There are three important fields that indicate the overall health and status of an array: dev_health, sync_ratio, and sync_action. They tell us the condition of the devices in the array, and the degree to which the array is synchronized. This commit fixes a condition that is reported incorrectly. When a member of the array is being rebuilt or a new device is added, the "recover" process is used to synchronize it with the rest of the array. When the process is complete, but the sync thread hasn't yet been reaped, it is possible for the state of MD to be: mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ] curr_resync_completed = <max dev size> (but not MaxSector) and all rdevs to be In_sync. This causes the 'array_in_sync' output parameter that is passed to rs_get_progress() to be computed incorrectly and reported as 'false' -- or not in-sync. This in turn causes the dev_health status characters to be reported as all 'a', rather than the proper 'A'. This can cause erroneous output for several seconds at a time when tools will want to be checking the condition due to events that are raised at the end of a sync process. Fix this by properly calculating the 'array_in_sync' return parameter in rs_get_progress(). Also, remove an unnecessary intermediate 'recovery_cp' variable in rs_get_progress(). Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly with stable ones: - X32 ABI fix for PCM; likely not so many people suffer from it, but still better to fix - Two minor kernel warning fixes on USB audio devices spotted by syzkaller - Regression fix of echoaudio due to its inconsistent dimension - Fix for HBR support on Intel DP audio, on some recent chips - USB-audio quirk for yet another Plantronics devices - Fix for potential double-fetch in ASIHPI FIFO queue" * tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usx2y: Suppress kernel warning at page allocation failures Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members" ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor ALSA: pcm: Fix structure definition for X32 ABI ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-M ALSA: hda - program ICT bits to support HBR audio ALSA: asihpi: fix a potential double-fetch bug when copying puhm ALSA: compress: Remove unused variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID subsystem fixes from Jiri Kosina: - buffer management size fix for i2c-hid driver, from Adrian Salido - tool ID regression fixes for Wacom driver from Jason Gerecke - a few small assorted fixes and a few device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: multitouch: Support ALPS PTP stick with pid 0x120A" HID: hidraw: fix power sequence when closing device HID: wacom: Always increment hdev refcount within wacom_get_hdev_data HID: wacom: generic: Clear ABS_MISC when tool leaves proximity HID: wacom: generic: Send MSC_SERIAL and ABS_MISC when leaving prox HID: i2c-hid: allocate hid buffers for real worst case HID: rmi: Make sure the HID device is opened on resume HID: multitouch: Support ALPS PTP stick with pid 0x120A HID: multitouch: support buttons and trackpoint on Lenovo X1 Tab Gen2 HID: wacom: Correct coordinate system of touchring and pen twist HID: wacom: Properly report negative values from Intuos Pro 2 Bluetooth HID: multitouch: Fix system-control buttons not working HID: add multi-input quirk for IDC6680 touchscreen HID: wacom: leds: Don't try to control the EKR's read-only LEDs HID: wacom: bits shifted too much for 9th and 10th buttons
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Check iwlwifi 9000 reorder buffer out-of-space condition properly, from Sara Sharon. 2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov Kasiviswanathan. 3) Fix session and tunnel release races in l2tp, from Guillaume Nault and Sabrina Dubroca. 4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter. 5) Several mlx5 driver fixes from the Mellanox folks (max flow counters cap check, invalid memory access in IPoIB support, etc.) 6) tun_get_user() should bail if skb->len is zero, from Alexander Potapenko. 7) Fix RCU lookups in inetpeer, from Eric Dumazet. 8) Fix locking in packet_do_bund(). 9) Handle cb->start() error properly in netlink dump code, from Jason A. Donenfeld. 10) Handle multicast properly in UDP socket early demux code. From Paolo Abeni. 11) Several erspan bug fixes in ip_gre, from Xin Long. 12) Fix use-after-free in socket filter code, in order to handle the fact that listener lock is no longer taken during the three-way TCP handshake. From Eric Dumazet. 13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov. 14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: 8021q: skip packets if the vlan is down bpf: fix bpf_tail_call() x64 JIT net: stmmac: dwmac-rk: Add RK3128 GMAC support rndis_host: support Novatel Verizon USB730L net: rtnetlink: fix info leak in RTM_GETSTATS call socket, bpf: fix possible use after free mlxsw: spectrum_router: Track RIF of IPIP next hops mlxsw: spectrum_router: Move VRF refcounting net: hns3: Fix an error handling path in 'hclge_rss_init_hw()' net: mvpp2: Fix clock resource by adding an optional bus clock r8152: add Linksys USB3GIGV1 id l2tp: fix l2tp_eth module loading ip_gre: erspan device should keep dst ip_gre: set tunnel hlen properly in erspan_tunnel_init ip_gre: check packet length and mtu correctly in erspan_xmit ip_gre: get key from session_id correctly in erspan_rcv tipc: use only positive error codes in messages ppp: fix __percpu annotation udp: perform source validation for mcast early demux IPv4: early demux can return an error code ...
-
Vishakha Narvekar authored
If the vlan is down, free the packet instead of proceeding with other processing, or counting it as received. If vlan interfaces are used as slaves for bonding, with arp monitoring for connectivity, if the rx counter is seen to be incrementing, then the bond device will not observe that the interface is down. CC: David S. Miller <davem@davemloft.net> Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Our first batch of fixes this release cycle, unfortunately a bit noisier than usual. Two major groups stand out: - Some pinctril dts/dtsi changes for stm32 due to a new driver being merged during the merge window, and this aligns the DT contents between the old format and the new. This could arguably be moved to the next merge window but it also seemed relatively harmless to include now. - Amlogic/meson had driver changes merged that required devicetree changes to avoid functional/performance regressions. I've already asked them to be more careful about this going forward, and making sure drivers are compatible with older DTs when they make these kind of changes. The platform is actively being upstreamed so there's a few things in flight, we've seen this happen before and sometimes it's hard to catch in time. Besides that there is the usual mix of minor fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: dts: stm32: use right pinctrl compatible for stm32f469 ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board ARM: defconfig: update Gemini defconfig ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399 reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST ARM: dts: da850-evm: add serial and ethernet aliases ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry ARM: dts: am33xx: Add spi alias to match SOC schematics ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399 arm64: dt marvell: Fix AP806 system controller size MAINTAINERS: add Macchiatobin maintainers entry ARC: reset: remove the misleading v1 suffix all over ARC: reset: add missing DT binding documentation for HSDKv1 reset driver ARC: reset: Only build on archs that have IOMEM ARM: at91: Replace uses of virt_to_phys with __pa_symbol ...
-
James Hogan authored
Update my imgtec.com and personal email address to my kernel.org one in a few places as MIPS will soon no longer be part of Imagination Technologies, and add mappings in .mailcap so get_maintainer.pl reports the right address. Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 Oct, 2017 30 commits
-
-
Olof Johansson authored
Merge tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into fixes STM32 fixes for v4.14: --------------------- -Fix STMPE1600 bindings for stm32429i-eval board -Use right compatible for stm32f469 pinctrl. It implies to use pinctrl dedicated files for F4 SoCs. * tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: use right pinctrl compatible for stm32f469 ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic 64-bit DT updates for v4.14 (round 3) - updates for new MMC driver features/fixes - support high-speed modes * tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes ARM64: dts: meson-gxl: libretech-cc: enable high speed modes ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times ARM64: dts: meson: add mmc clk gate pins ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes ARM64: dts: meson-gx: Use correct mmc clock source 0 Signed-off-by: Olof Johansson <olof@lixom.net>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "A lot of stuff, sorry about that. A week on a beach, then a bunch of time catching up then more time letting it bake in -next. Shan't do that again!" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (51 commits) include/linux/fs.h: fix comment about struct address_space checkpatch: fix ignoring cover-letter logic m32r: fix build failure lib/ratelimit.c: use deferred printk() version kernel/params.c: improve STANDARD_PARAM_DEF readability kernel/params.c: fix an overflow in param_attr_show kernel/params.c: fix the maximum length in param_get_string mm/memory_hotplug: define find_{smallest|biggest}_section_pfn as unsigned long mm/memory_hotplug: change pfn_to_section_nr/section_nr_to_pfn macro to inline function kernel/kcmp.c: drop branch leftover typo memremap: add scheduling point to devm_memremap_pages mm, page_alloc: add scheduling point to memmap_init_zone mm, memory_hotplug: add scheduling point to __add_pages lib/idr.c: fix comment for idr_replace() mm: memcontrol: use vmalloc fallback for large kmem memcg arrays kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv() include/linux/bitfield.h: remove 32bit from FIELD_GET comment block lib/lz4: make arrays static const, reduces object code size exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] array exec: binfmt_misc: fix race between load_misc_binary() and kill_node() ...
-
Linus Torvalds authored
Merge branch 'fixes-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull smack fix from James Morris: "It fixes a bug in xattr_getsecurity() where security_release_secctx() was being called instead of kfree(), which leads to a memory leak in the capabilities code. smack_inode_getsecurity is also fixed to behave correctly when called from there" * 'fixes-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixlets from Steven Rostedt: "Two updates: - A memory fix with left over code from spliting out ftrace_ops and function graph tracer, where the function graph tracer could reset the trampoline pointer, leaving the old trampoline not to be freed (memory leak). - The update to Paul's patch that added the unnecessary READ_ONCE(). This removes the unnecessary READ_ONCE() instead of having to rebase the branch to update the patch that added it" * tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}() ftrace: Fix kmemleak in unregister_ftrace_graph
-
Milan Broz authored
If a crypt mapping uses optional sector_size feature, additional restrictions to mapped device segment size must be applied in constructor, otherwise the device activation will fail later. Fixes: 8f0009a2 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Alexandre Torgue authored
Currently, same stm32f429-pinctrl driver is used for stm32f429 and stm32f469. As pin map is different between those 2 MCUs, a stm32f469-pinctrl driver has been recently added. This patch -allows to use stm32f469-pinctrl driver for stm32f469 boards -reworks stm32 devicetree files to fit with stm32f429 / stm32f469 In the same time it fixes an issue when only MACH_STM32F469 flag is selected in menuconfig. Fixes: d28bcd53 ("ARM: stm32: Introduce MACH_STM32F469 flag") Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Alexandre Torgue authored
To declare gpio interrupt line for STMPE1600, 2 possibilities are offered: -use gpio binding (and then the gpiolib interface inside driver) -use interrupt binding as each gpio-controller are also interrupt controller on stm32f429. In STMPE 1600 node both (gpio and interrupt) bindings are defined. This patch fixes this issue and use only interrupt binding. Fixes: c04b2e72 ("ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
-
Casey Schaufler authored
security_inode_getsecurity() provides the text string value of a security attribute. It does not provide a "secctx". The code in xattr_getsecurity() that calls security_inode_getsecurity() and then calls security_release_secctx() happened to work because SElinux and Smack treat the attribute and the secctx the same way. It fails for cap_inode_getsecurity(), because that module has no secctx that ever needs releasing. It turns out that Smack is the one that's doing things wrong by not allocating memory when instructed to do so by the "alloc" parameter. The fix is simple enough. Change the security_release_secctx() to kfree() because it isn't a secctx being returned by security_inode_getsecurity(). Change Smack to allocate the string when told to do so. Note: this also fixes memory leaks for LSMs which implement inode_getsecurity but not release_secctx, such as capabilities. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
-
Olof Johansson authored
Merge tag 'omap-for-v4.14/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.14-rc cycle Few minor fixes for omaps, mostly just boot time warning fixes: - Drop undocumented camera binding that got merged during the merge window by accident as I applied before Sakari's comments - Fix soft reset warning for dra7 kexec boot for gpio1 as the optional clocks need to be enabled for reset - Fix dra7 kexec boot clock rate for McASP as the rate is no longer the default rate after kexec - Fix omap3 pandora MMC warning during boot - Add am33xx SPI alias like we have on other SoCs - Remove node for non-existing CPSW EMAC Ethernet on am43xx-epos-evm * tag 'omap-for-v4.14/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry ARM: dts: am33xx: Add spi alias to match SOC schematics ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v4.14-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Adding the operating points on rk3368 like they were did not end up well for the boards as all of them are missing their cpu supplies, the OPPs actually need to follow the <target min max> format as the regulator is shared between both clusters and the one rk3368 board I have, somehow also doesn't like the higher opps at all - all of which I only realized after I brought my rk3368 board online again, after its bootloader broke. So we revert that OPP addition for now. And also two fixes for the mipi dsi controller on rk3399, which was referencing a clock to high up in the clock-tree so that an intermediate gate could be disabled inadvertently and also needs a clock for its area in the general register files of the rk3399 soc. * tag 'v4.14-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399 arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399 Revert "arm64: dts: rockchip: Add basic cpu frequencies for RK3368" Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu fixes for 4.14 (part 1) Update MAINTAINERS for the Macchiatobin board (Armada 8K based) Fix AP806 system controller size on Armada 7K/8K * tag 'mvebu-fixes-4.14-1' of git://git.infradead.org/linux-mvebu: arm64: dt marvell: Fix AP806 system controller size MAINTAINERS: add Macchiatobin maintainers entry Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.pengutronix.de/git/pza/linuxOlof Johansson authored
Reset controller fixes for v4.14 - Remove misleading HSDK v1 suffix, as there is no v2 planned - Add missing DT binding documentation for HSDK reset driver - Fix HSDK reset driver dependencies * tag 'reset-fixes-for-4.14' of git://git.pengutronix.de/git/pza/linux: reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST ARC: reset: remove the misleading v1 suffix all over ARC: reset: add missing DT binding documentation for HSDKv1 reset driver ARC: reset: Only build on archs that have IOMEM Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'davinci-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes A fix for random ethernet mac address problem on DA850 EVM. * tag 'davinci-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-evm: add serial and ethernet aliases Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Fixes for 4.14: - three DT fixes for the newly introduced sama5d27_som1_ek board - one treewide modification that didn't touch this new PM code: we synchronize now to be coherent with the other ARM platforms * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: Replace uses of virt_to_phys with __pa_symbol ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus ARM: dts: at91: sama5d27_som1_ek: fix typos ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB Signed-off-by: Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
This updates the Gemini defconfig with drivers merged for v4.13 or v4.14: - ATA driver is merged - DMA driver is merged - RTC driver gets selected from default Kconfig Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Arnd Bergmann authored
It is no longer possible to load this at runtime, so let's change the few remaining users to have it built-in all the time. arch/arm/configs/zeus_defconfig:115:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE arch/arm/configs/viper_defconfig:116:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE arch/arm/configs/pxa_defconfig:474:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE Reported-by: kernelci.org bot <bot@kernelci.org> Fixes: 6104c370 ("fbcon: Make fbcon a built-time depency for fbdev") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Mike Rapoport authored
Before commit 9c5d760b ("mm: split gfp_mask and mapping flags into separate fields") the private_* fields of struct adrress_space were grouped together and using "ditto" in comments describing the last fields was correct. With introduction of gpf_mask between private_lock and private_list "ditto" references the wrong description. Fix it by using the elaborate description. Link: http://lkml.kernel.org/r/1507009987-8746-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stafford Horne authored
Currently running checkpatch on a directory with a cover-letter.patch file reports the following error: ----------------------------------------- patches/smp-v2/v2-0000-cover-letter.patch ----------------------------------------- ERROR: Does not appear to be a unified-diff format patch The logic to suppress the unified-diff check for cover letters is there but is checking $file instead of $filename. Fix the variable to use the correct one. Link: http://lkml.kernel.org/r/20170909090406.31523-1-shorne@gmail.comSigned-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sudip Mukherjee authored
The allmodconfig build of m32r is failing with the error: lib/mpi/mpih-div.o: In function 'mpihelp_divrem': mpih-div.c:(.text+0x40): undefined reference to 'abort' mpih-div.c:(.text+0x40): relocation truncated to fit: R_M32R_26_PCREL_RELA against undefined symbol 'abort' The function 'abort' was never defined for the m32r architecture. Create 'abort' as is done in other arch like 'arm' and 'unicore32'. Link: http://lkml.kernel.org/r/1506727220-6108-1-git-send-email-sudip.mukherjee@codethink.co.ukSigned-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
printk_ratelimit() invokes ___ratelimit() which may invoke a normal printk() (pr_warn() in this particular case) to warn about suppressed output. Given that printk_ratelimit() may be called from anywhere, that pr_warn() is dangerous - it may end up deadlocking the system. Fix ___ratelimit() by using deferred printk(). Sasha reported the following lockdep error: : Unregister pv shared memory for cpu 8 : select_fallback_rq: 3 callbacks suppressed : process 8583 (trinity-c78) no longer affine to cpu8 : : ====================================================== : WARNING: possible circular locking dependency detected : 4.14.0-rc2-next-20170927+ #252 Not tainted : ------------------------------------------------------ : migration/8/62 is trying to acquire lock: : (&port_lock_key){-.-.}, at: serial8250_console_write() : : but task is already holding lock: : (&rq->lock){-.-.}, at: sched_cpu_dying() : : which lock already depends on the new lock. : : : the existing dependency chain (in reverse order) is: : : -> #3 (&rq->lock){-.-.}: : __lock_acquire() : lock_acquire() : _raw_spin_lock() : task_fork_fair() : sched_fork() : copy_process.part.31() : _do_fork() : kernel_thread() : rest_init() : start_kernel() : x86_64_start_reservations() : x86_64_start_kernel() : verify_cpu() : : -> #2 (&p->pi_lock){-.-.}: : __lock_acquire() : lock_acquire() : _raw_spin_lock_irqsave() : try_to_wake_up() : default_wake_function() : woken_wake_function() : __wake_up_common() : __wake_up_common_lock() : __wake_up() : tty_wakeup() : tty_port_default_wakeup() : tty_port_tty_wakeup() : uart_write_wakeup() : serial8250_tx_chars() : serial8250_handle_irq.part.25() : serial8250_default_handle_irq() : serial8250_interrupt() : __handle_irq_event_percpu() : handle_irq_event_percpu() : handle_irq_event() : handle_level_irq() : handle_irq() : do_IRQ() : ret_from_intr() : native_safe_halt() : default_idle() : arch_cpu_idle() : default_idle_call() : do_idle() : cpu_startup_entry() : rest_init() : start_kernel() : x86_64_start_reservations() : x86_64_start_kernel() : verify_cpu() : : -> #1 (&tty->write_wait){-.-.}: : __lock_acquire() : lock_acquire() : _raw_spin_lock_irqsave() : __wake_up_common_lock() : __wake_up() : tty_wakeup() : tty_port_default_wakeup() : tty_port_tty_wakeup() : uart_write_wakeup() : serial8250_tx_chars() : serial8250_handle_irq.part.25() : serial8250_default_handle_irq() : serial8250_interrupt() : __handle_irq_event_percpu() : handle_irq_event_percpu() : handle_irq_event() : handle_level_irq() : handle_irq() : do_IRQ() : ret_from_intr() : native_safe_halt() : default_idle() : arch_cpu_idle() : default_idle_call() : do_idle() : cpu_startup_entry() : rest_init() : start_kernel() : x86_64_start_reservations() : x86_64_start_kernel() : verify_cpu() : : -> #0 (&port_lock_key){-.-.}: : check_prev_add() : __lock_acquire() : lock_acquire() : _raw_spin_lock_irqsave() : serial8250_console_write() : univ8250_console_write() : console_unlock() : vprintk_emit() : vprintk_default() : vprintk_func() : printk() : ___ratelimit() : __printk_ratelimit() : select_fallback_rq() : sched_cpu_dying() : cpuhp_invoke_callback() : take_cpu_down() : multi_cpu_stop() : cpu_stopper_thread() : smpboot_thread_fn() : kthread() : ret_from_fork() : : other info that might help us debug this: : : Chain exists of: : &port_lock_key --> &p->pi_lock --> &rq->lock : : Possible unsafe locking scenario: : : CPU0 CPU1 : ---- ---- : lock(&rq->lock); : lock(&p->pi_lock); : lock(&rq->lock); : lock(&port_lock_key); : : *** DEADLOCK *** : : 4 locks held by migration/8/62: : #0: (&p->pi_lock){-.-.}, at: sched_cpu_dying() : #1: (&rq->lock){-.-.}, at: sched_cpu_dying() : #2: (printk_ratelimit_state.lock){....}, at: ___ratelimit() : #3: (console_lock){+.+.}, at: vprintk_emit() : : stack backtrace: : CPU: 8 PID: 62 Comm: migration/8 Not tainted 4.14.0-rc2-next-20170927+ #252 : Call Trace: : dump_stack() : print_circular_bug() : check_prev_add() : ? add_lock_to_list.isra.26() : ? check_usage() : ? kvm_clock_read() : ? kvm_sched_clock_read() : ? sched_clock() : ? check_preemption_disabled() : __lock_acquire() : ? __lock_acquire() : ? add_lock_to_list.isra.26() : ? debug_check_no_locks_freed() : ? memcpy() : lock_acquire() : ? serial8250_console_write() : _raw_spin_lock_irqsave() : ? serial8250_console_write() : serial8250_console_write() : ? serial8250_start_tx() : ? lock_acquire() : ? memcpy() : univ8250_console_write() : console_unlock() : ? __down_trylock_console_sem() : vprintk_emit() : vprintk_default() : vprintk_func() : printk() : ? show_regs_print_info() : ? lock_acquire() : ___ratelimit() : __printk_ratelimit() : select_fallback_rq() : sched_cpu_dying() : ? sched_cpu_starting() : ? rcutree_dying_cpu() : ? sched_cpu_starting() : cpuhp_invoke_callback() : ? cpu_disable_common() : take_cpu_down() : ? trace_hardirqs_off_caller() : ? cpuhp_invoke_callback() : multi_cpu_stop() : ? __this_cpu_preempt_check() : ? cpu_stop_queue_work() : cpu_stopper_thread() : ? cpu_stop_create() : smpboot_thread_fn() : ? sort_range() : ? schedule() : ? __kthread_parkme() : kthread() : ? sort_range() : ? kthread_create_on_node() : ret_from_fork() : process 9121 (trinity-c78) no longer affine to cpu8 : smpboot: CPU 8 is now offline Link: http://lkml.kernel.org/r/20170928120405.18273-1-sergey.senozhatsky@gmail.com Fixes: 6b1d174b ("ratelimit: extend to print suppressed messages on release") Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Sasha Levin <levinsasha928@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Borislav Petkov <bp@suse.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Align the parameters passed to STANDARD_PARAM_DEF for clarity. Link: http://lkml.kernel.org/r/20170928162728.756143cc@endymionSigned-off-by: Jean Delvare <jdelvare@suse.de> Suggested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Function param_attr_show could overflow the buffer it is operating on. The buffer size is PAGE_SIZE, and the string returned by attribute->param->ops->get is generated by scnprintf(buffer, PAGE_SIZE, ...) so it could be PAGE_SIZE - 1 long, with the terminating '\0' at the very end of the buffer. Calling strcat(..., "\n") on this isn't safe, as the '\0' will be replaced by '\n' (OK) and then another '\0' will be added past the end of the buffer (not OK.) Simply add the trailing '\n' when writing the attribute contents to the buffer originally. This is safe, and also faster. Credits to Teradata for discovering this issue. Link: http://lkml.kernel.org/r/20170928162602.60c379c7@endymionSigned-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
The length parameter of strlcpy() is supposed to reflect the size of the target buffer, not of the source string. Harmless in this case as the buffer is PAGE_SIZE long and the source string is always much shorter than this, but conceptually wrong, so let's fix it. Link: http://lkml.kernel.org/r/20170928162515.24846b4f@endymionSigned-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
YASUAKI ISHIMATSU authored
find_{smallest|biggest}_section_pfn()s find the smallest/biggest section and return the pfn of the section. But the functions are defined as int. So the functions always return 0x00000000 - 0xffffffff. It means if memory address is over 16TB, the functions does not work correctly. To handle 64 bit value, the patch defines find_{smallest|biggest}_section_pfn() as unsigned long. Fixes: 815121d2 ("memory_hotplug: clear zone when removing the memory") Link: http://lkml.kernel.org/r/d9d5593a-d0a4-c4be-ab08-493df59a85c6@gmail.comSigned-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
YASUAKI ISHIMATSU authored
pfn_to_section_nr() and section_nr_to_pfn() are defined as macro. pfn_to_section_nr() has no issue even if it is defined as macro. But section_nr_to_pfn() has overflow issue if sec is defined as int. section_nr_to_pfn() just shifts sec by PFN_SECTION_SHIFT. If sec is defined as unsigned long, section_nr_to_pfn() returns pfn as 64 bit value. But if sec is defined as int, section_nr_to_pfn() returns pfn as 32 bit value. __remove_section() calculates start_pfn using section_nr_to_pfn() and scn_nr defined as int. So if hot-removed memory address is over 16TB, overflow issue occurs and section_nr_to_pfn() does not calculate correct pfn. To make callers use proper arg, the patch changes the macros to inline functions. Fixes: 815121d2 ("memory_hotplug: clear zone when removing the memory") Link: http://lkml.kernel.org/r/e643a387-e573-6bbf-d418-c60c8ee3d15e@gmail.comSigned-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Cyrill Gorcunov authored
The else branch been left over and escaped the source code refresh. Not a problem but better clean it up. Fixes: 0791e364 ("kcmp: add KCMP_EPOLL_TFD mode to compare epoll target files") Link: http://lkml.kernel.org/r/20170917165838.GA1887@uranus.lanReported-by: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
devm_memremap_pages is initializing struct pages in for_each_device_pfn and that can take quite some time. We have even seen a soft lockup triggering on a non preemptive kernel NMI watchdog: BUG: soft lockup - CPU#61 stuck for 22s! [kworker/u641:11:1808] [...] RIP: 0010:[<ffffffff8118b6b7>] [<ffffffff8118b6b7>] devm_memremap_pages+0x327/0x430 [...] Call Trace: pmem_attach_disk+0x2fd/0x3f0 [nd_pmem] nvdimm_bus_probe+0x64/0x110 [libnvdimm] driver_probe_device+0x1f7/0x420 bus_for_each_drv+0x52/0x80 __device_attach+0xb0/0x130 bus_probe_device+0x87/0xa0 device_add+0x3fc/0x5f0 nd_async_device_register+0xe/0x40 [libnvdimm] async_run_entry_fn+0x43/0x150 process_one_work+0x14e/0x410 worker_thread+0x116/0x490 kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 fix this by adding cond_resched every 1024 pages. Link: http://lkml.kernel.org/r/20170918121410.24466-4-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
memmap_init_zone gets a pfn range to initialize and it can be really large resulting in a soft lockup on non-preemptible kernels NMI watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [kworker/u642:5:1720] [...] task: ffff88ecd7e902c0 ti: ffff88eca4e50000 task.ti: ffff88eca4e50000 RIP: move_pfn_range_to_zone+0x185/0x1d0 [...] Call Trace: devm_memremap_pages+0x2c7/0x430 pmem_attach_disk+0x2fd/0x3f0 [nd_pmem] nvdimm_bus_probe+0x64/0x110 [libnvdimm] driver_probe_device+0x1f7/0x420 bus_for_each_drv+0x52/0x80 __device_attach+0xb0/0x130 bus_probe_device+0x87/0xa0 device_add+0x3fc/0x5f0 nd_async_device_register+0xe/0x40 [libnvdimm] async_run_entry_fn+0x43/0x150 process_one_work+0x14e/0x410 worker_thread+0x116/0x490 kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 Fix this by adding a scheduling point once per page block. Link: http://lkml.kernel.org/r/20170918121410.24466-3-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Patch series "mm, memory_hotplug: fix few soft lockups in memory hotadd". Johannes has noticed few soft lockups when adding a large nvdimm device. All of them were caused by a long loop without any explicit cond_resched which is a problem for !PREEMPT kernels. The fix is quite straightforward. Just make sure that cond_resched gets called from time to time. This patch (of 3): __add_pages gets a pfn range to add and there is no upper bound for a single call. This is usually a memory block aligned size for the regular memory hotplug - smaller sizes are usual for memory balloning drivers, or the whole NUMA node for physical memory online. There is no explicit scheduling point in that code path though. This can lead to long latencies while __add_pages is executed and we have even seen a soft lockup report during nvdimm initialization with !PREEMPT kernel NMI watchdog: BUG: soft lockup - CPU#11 stuck for 23s! [kworker/u641:3:832] [...] Workqueue: events_unbound async_run_entry_fn task: ffff881809270f40 ti: ffff881809274000 task.ti: ffff881809274000 RIP: _raw_spin_unlock_irqrestore+0x11/0x20 RSP: 0018:ffff881809277b10 EFLAGS: 00000286 [...] Call Trace: sparse_add_one_section+0x13d/0x18e __add_pages+0x10a/0x1d0 arch_add_memory+0x4a/0xc0 devm_memremap_pages+0x29d/0x430 pmem_attach_disk+0x2fd/0x3f0 [nd_pmem] nvdimm_bus_probe+0x64/0x110 [libnvdimm] driver_probe_device+0x1f7/0x420 bus_for_each_drv+0x52/0x80 __device_attach+0xb0/0x130 bus_probe_device+0x87/0xa0 device_add+0x3fc/0x5f0 nd_async_device_register+0xe/0x40 [libnvdimm] async_run_entry_fn+0x43/0x150 process_one_work+0x14e/0x410 worker_thread+0x116/0x490 kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 DWARF2 unwinder stuck at ret_from_fork+0x3f/0x70 Fix this by adding cond_resched once per each memory section in the given pfn range. Each section is constant amount of work which itself is not too expensive but many of them will just add up. Link: http://lkml.kernel.org/r/20170918121410.24466-2-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-