[ Upstream commit 39935466 ]

The kernel-doc for the of_irq_get[_byname]()  is clearly inadequate in
describing the return values -- of_irq_get_byname() is documented better
than of_irq_get() but it  still doesn't mention that 0 is returned iff
irq_create_of_mapping() fails (it doesn't return an error code in this
case). Document all possible return value variants, making the writing
of the word "IRQ" consistent, while at it...

Fixes: 9ec36caf ("of/irq: do irq resolution in platform_get_irq")
Fixes: ad69674e ("of/irq: do irq resolution in platform_get_irq_byname()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
CC: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit c7103f65 ]

Broadwell made a small change to the rank target register moving the
target rank ID field up from bits 16:19 to bits 20:23.

Also found that the offset field grew by one bit in the IVY_BRIDGE to
HASWELL transition, so fix the RIR_OFFSET() macro too.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org # v3.19+
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.comSigned-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit f90d83b3 ]

Add the pin configuration value of this machine into the pin_quirk
table to make DELL1_MIC_NO_PRESENCE apply to this machine.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 0422e83d ]

Recursive locking for ww_mutexes was originally conceived as an
exception. However, it is heavily used by the DRM atomic modesetting
code. Currently, the recursive deadlock is checked after we have queued
up for a busy-spin and as we never release the lock, we spin until
kicked, whereupon the deadlock is discovered and reported.

A simple solution for the now common problem is to move the recursive
deadlock discovery to the first action when taking the ww_mutex.
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1464293297-19777-1-git-send-email-chris@chris-wilson.co.ukSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit dd5f1b04 ]

The INTID mask is wrong, and is made a signed value, which has
nteresting effects in the KVM emulation. Let's sanitize it.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit d14bdb55 ]

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit c622a3c2 ]

Found by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
    IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
    PGD 6f80b067 PUD b6535067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
    [...]
    Call Trace:
     [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
     [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
     [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
     [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a1062>] tracesys_phase2+0x84/0x89
    Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
    RIP  [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
     RSP <ffff8800926cbca8>
    CR2: 0000000000000120

Testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[26];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", 0);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);

        struct kvm_irqfd ifd;
        ifd.fd = syscall(SYS_eventfd2, 5, 0);
        ifd.gsi = 3;
        ifd.flags = 2;
        ifd.resamplefd = ifd.fd;
        r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
        return 0;
    }
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit e2dfb4b8 ]

PTRACE_SETVFPREGS fails to properly mark the VFP register set to be
reloaded, because it undoes one of the effects of vfp_flush_hwstate().

Specifically vfp_flush_hwstate() sets thread->vfpstate.hard.cpu to
an invalid CPU number, but vfp_set() overwrites this with the original
CPU number, thereby rendering the hardware state as apparently "valid",
even though the software state is more recent.

Fix this by reverting the previous change.

Cc: <stable@vger.kernel.org>
Fixes: 8130b9d7 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers")
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Simon Marchi <simon.marchi@ericsson.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit f045f459 ]

Reported by KASAN.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 383d0a41 ]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 3988f645 ]

NVIDIA provided the documentation for mp error 0x10, INVALID_ADDR_SPACE,
which apparently happens when trying to use an atomic operation on
local or shared memory (instead of global memory).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit f840ab18 ]

The freq_table array is not populated before calling
thermal_of_cooling_register. The code which populates the freq table was
introduced in commit f6859014.
This should be done before registering new thermal cooling device.
The log shows effects of this wrong decision.
[    2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34
[    2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34

Cc: <stable@vger.kernel.org> # 3.19+
Fixes: f6859014 ("thermal: cpu_cooling: Store frequencies in descending order")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Javi Merino <javi.merino@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 59f0d218 ]

That's what it is for, lets name it properly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 7cc85103 ]

If we do not provide the PVR for POWER8NVL, a guest on this system
currently ends up in PowerISA 2.06 compatibility mode on KVM, since QEMU
does not provide a generic PowerISA 2.07 mode yet. So some new
instructions from POWER8 (like "mtvsrd") get disabled for the guest,
resulting in crashes when using code compiled explicitly for
POWER8 (e.g. with the "-mcpu=power8" option of GCC).

Fixes: ddee09c0 ("powerpc: Add PVR for POWER8NVL processor")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit fbd83006 ]

Linux fails to boot as a guest with a QEMU CD-ROM:

[    4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100
[    4.443649] ata2.00: configured for MWDMA2
[    4.450267] scsi 1:0:0:0: CD-ROM            QEMU     QEMU CD-ROM      0.8. PQ: 0 ANSI: 5
[    4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.464319] ata2.00: BMDMA stat 0x5
[    4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in
[    4.464339]          Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.464341] ata2.00: status: { DRDY DRQ }
[    4.465864] ata2: soft resetting link
[    4.625971] ata2.00: configured for MWDMA2
[    4.628290] ata2: EH complete
[    4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.646671] ata2.00: BMDMA stat 0x5
[    4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in
[    4.646683]          Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.646685] ata2.00: status: { DRDY DRQ }
[    4.648193] ata2: soft resetting link

...

Fix this by suppressing VPD inquiry for this device.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit fe7a7c57 ]

Currently, the mesh paths associated with a nexthop station are cleaned
up in the following code path:

    __sta_info_destroy_part1
    synchronize_net()
    __sta_info_destroy_part2
     -> cleanup_single_sta
       -> mesh_sta_cleanup
         -> mesh_plink_deactivate
           -> mesh_path_flush_by_nexthop

However, there are a couple of problems here:

1) the paths aren't flushed at all if the MPM is running in userspace
   (e.g. when using wpa_supplicant or authsae)

2) there is no synchronize_rcu between removing the path and readers
   accessing the nexthop, which means the following race is possible:

CPU0                            CPU1
~~~~                            ~~~~
                                sta_info_destroy_part1()
                                synchronize_net()
rcu_read_lock()
mesh_nexthop_resolve()
  mpath = mesh_path_lookup()
                                [...] -> mesh_path_flush_by_nexthop()
  sta = rcu_dereference(
    mpath->next_hop)
                                kfree(sta)
  access sta <-- CRASH

Fix both of these by unconditionally flushing paths before destroying
the sta, and by adding a synchronize_net() after path flush to ensure
no active readers can still dereference the sta.

Fixes this crash:

[  348.529295] BUG: unable to handle kernel paging request at 00020040
[  348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[  348.530014] *pde = 00000000
[  348.530014] Oops: 0000 [#1] PREEMPT
[  348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ]
[  348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G           O 4.6.0-rc5-wt=V1 #1
[  348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016  11/07/2014
[  348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000
[  348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0
[  348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[  348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008
[  348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40
[  348.530014]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[  348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690
[  348.530014] Stack:
[  348.530014]  00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0
[  348.530014]  f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320
[  348.530014]  f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1
[  348.530014] Call Trace:
[  348.530014]  [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211]
[  348.530014]  [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211]
[  348.530014]  [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211]
[  348.530014]  [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211]
[  348.530014]  [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3
[  348.530014]  [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b
[  348.530014]  [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4]
[  348.530014]  [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat]
[  348.530014]  [<c04c6f45>] ? netif_skb_features+0x14d/0x30a
[  348.530014]  [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211]
[  348.530014]  [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[  348.530014]  [<c04c7261>] ?  validate_xmit_skb.isra.120.part.121+0x10/0x253
[  348.530014]  [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[  348.530014]  [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[  348.530014]  [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[  348.530014]  [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv]
[  348.530014]  [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv]
[  348.530014]  [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv]
[  348.530014]  [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv]
[  348.530014]  [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv]
[  348.530014]  [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv]
[  348.530014]  [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[  348.530014]  [<c04c7261>] ?  validate_xmit_skb.isra.120.part.121+0x10/0x253
[  348.530014]  [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[  348.530014]  [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[  348.530014]  [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb]
[  348.530014]  [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[  348.530014]  [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge]
[  348.530014]  [<f843a35f>] br_forward_finish+0x29/0x74 [bridge]
[  348.530014]  [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge]
[  348.530014]  [<f843a714>] __br_forward+0x89/0xe7 [bridge]
[  348.530014]  [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge]
[  348.530014]  [<f843a234>] deliver_clone+0x34/0x3b [bridge]
[  348.530014]  [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[  348.530014]  [<f843a66d>] br_flood+0x77/0x95 [bridge]
[  348.530014]  [<f843a809>] br_flood_forward+0x13/0x1a [bridge]
[  348.530014]  [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[  348.530014]  [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge]
[  348.530014]  [<c04e9b2b>] ? nf_iterate+0x2b/0x6b
[  348.530014]  [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge]
[  348.530014]  [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge]
[  348.530014]  [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b
[  348.530014]  [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge]
[  348.530014]  [<c023cea4>] ? resched_curr+0x19/0x37
[  348.530014]  [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe
[  348.530014]  [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc
[  348.530014]  [<c04c4fc1>] __netif_receive_skb+0x47/0x55
[  348.530014]  [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a
[  348.530014]  [<c04c61ef>] napi_gro_receive+0x3a/0x94
[  348.530014]  [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb]
[  348.530014]  [<c0242bd8>] ? swake_up_locked+0x14/0x26
[  348.530014]  [<c04c5d29>] net_rx_action+0xde/0x250
[  348.530014]  [<c022a743>] __do_softirq+0x8a/0x163
[  348.530014]  [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19
[  348.530014]  [<c021100f>] do_softirq_own_stack+0x26/0x2c
[  348.530014]  <IRQ>
[  348.530014]  [<c022a957>] irq_exit+0x31/0x6f
[  348.530014]  [<c0210eb2>] do_IRQ+0x8d/0xa0
[  348.530014]  [<c058152c>] common_interrupt+0x2c/0x40
[  348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005
[  348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40
[  348.530014] CR2: 0000000000020040
[  348.530014] ---[ end trace 48556ac26779732e ]---
[  348.530014] Kernel panic - not syncing: Fatal exception in interrupt
[  348.530014] Kernel Offset: disabled

Cc: stable@vger.kernel.org
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Tested-by: Fred Veldini <fred.veldini@gmail.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 62397da5 ]

A wmediumd that does not send this attribute causes a NULL pointer
dereference, as the attribute is accessed even if it does not exist.

The attribute was required but never checked ever since userspace frame
forwarding has been introduced. The issue gets more problematic once we
allow wmediumd registration from user namespaces.

Cc: stable@vger.kernel.org
Fixes: 7882513b ("mac80211_hwsim driver support userspace frame tx/rx")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 8dd75ccb ]

We are already using the privileged versions of MMCR0, MMCR1
and MMCRA in the kernel, so for MMCR2, we should better use
the privileged versions, too, to be consistent.

Fixes: 240686c1 ("powerpc: Initialise PMU related regs on Power8")
Cc: stable@vger.kernel.org # v3.10+
Suggested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit d23fac2b ]

The SIAR and SDAR registers are available twice, one time as SPRs
780 / 781 (unprivileged, but read-only), and one time as the SPRs
796 / 797 (privileged, but read and write). The Linux kernel code
currently uses the unprivileged  SPRs - while this is OK for reading,
writing to that register of course does not work.
Since the KVM code tries to write to this register, too (see the mtspr
in book3s_hv_rmhandlers.S), the contents of this register sometimes get
lost for the guests, e.g. during migration of a VM.
To fix this issue, simply switch to the privileged SPR numbers instead.

Cc: stable@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 5edf673d ]

When a dual-edge irq is triggered, an incorrect irq will be reported on
condition that the external signal is not stable and this incorrect irq
has been registered.
Correct the register offset.

Cc: stable@vger.kernel.org
Signed-off-by: Hongkun Cao <hongkun.cao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit e69e7e03 ]

That is some different register for ALC255 and ALC256.
ALC256 can't fit with some ALC255 register.
This issue is cause from LDO output voltage control.
This patch is updated the right LDO register value.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 871e178e ]

In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the
spec states that values of 9900-9905 can be returned, indicating that
software should delay for 10^x (where x is the last digit, i.e. 990x)
milliseconds and attempt the call again. Currently, the kernel doesn't
know about this, and respecting it fixes some PCI failures when the
hypervisor is busy.

The delay is capped at 0.2 seconds.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit ab6a11a7 ]

The ccp-crypto module for AES XTS support has a bug that can allow requests
greater than 4096 bytes in size to be passed to the CCP hardware. The CCP
hardware does not support request sizes larger than 4096, resulting in
incorrect output. The request should actually be handled by the fallback
mechanism instantiated by the ccp-crypto module.

Add a check to insure the request size is less than or equal to the maximum
supported size and use the fallback mechanism if it is not.

Cc: <stable@vger.kernel.org> # 3.14.x-
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit a621bac3 ]

When SCSI was written, all commands coming from the filesystem
(REQ_TYPE_FS commands) had data.  This meant that our signal for needing
to complete the command was the number of bytes completed being equal to
the number of bytes in the request.  Unfortunately, with the advent of
flush barriers, we can now get zero length REQ_TYPE_FS commands, which
confuse this logic because they satisfy the condition every time.  This
means they never get retried even for retryable conditions, like UNIT
ATTENTION because we complete them early assuming they're done.  Fix
this by special casing the early completion condition to recognise zero
length commands with errors and let them drop through to the retry code.

Cc: stable@vger.kernel.org
Reported-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Tested-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit bad6a185 ]

In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:

crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'

This adds a Kconfig 'select' statement to ensure the dependency
is always there.

Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 037369b8 ]

The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts.  However, there is a problem that the options
may disappear after remount.  If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.

To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 01d6e087 ]

Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the
kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: c8f33d0b ("affs: kstrdup() memory handling")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# v4.1+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 44d51706 ]

Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: ce657611 ("hpfs: kstrdup() out of memory handling")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit f49cf3b8 ]

Pwm config may sleep so defer it using a worker.

On a Freescale i.MX53 based board we ran into "BUG: scheduling while
atomic" because input_inject_event locks interrupts, but
imx_pwm_config_v2 sleeps.

Tested on Freescale i.MX53 SoC with 4.6.0.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 3017cd63 ]

With netconsole (at least) the pr_err("...  disablingn") call can
recurse back into the dma-debug code, where it'll try to grab
free_entries_lock again.  Avoid the problem by doing the printk after
dropping the lock.

Link: http://lkml.kernel.org/r/1463678421-18683-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 1900149c ]

Ezequiel reported that he's facing UBI going into read-only
mode after power cut. It turned out that this behavior happens
only when updating a static volume is interrupted and Fastmap is
used.

A possible trace can look like:
ubi0 warning: ubi_io_read_vid_hdr [ubi]: no VID header found at PEB 2323, only 0xFF bytes
ubi0 warning: ubi_eba_read_leb [ubi]: switch to read-only mode
CPU: 0 PID: 833 Comm: ubiupdatevol Not tainted 4.6.0-rc2-ARCH #4
Hardware name: SAMSUNG ELECTRONICS CO., LTD. 300E4C/300E5C/300E7C/NP300E5C-AD8AR, BIOS P04RAP 10/15/2012
0000000000000286 00000000eba949bd ffff8800c45a7b38 ffffffff8140d841
ffff8801964be000 ffff88018eaa4800 ffff8800c45a7bb8 ffffffffa003abf6
ffffffff850e2ac0 8000000000000163 ffff8801850e2ac0 ffff8801850e2ac0
Call Trace:
[<ffffffff8140d841>] dump_stack+0x63/0x82
[<ffffffffa003abf6>] ubi_eba_read_leb+0x486/0x4a0 [ubi]
[<ffffffffa00453b3>] ubi_check_volume+0x83/0xf0 [ubi]
[<ffffffffa0039d97>] ubi_open_volume+0x177/0x350 [ubi]
[<ffffffffa00375d8>] vol_cdev_open+0x58/0xb0 [ubi]
[<ffffffff8124b08e>] chrdev_open+0xae/0x1d0
[<ffffffff81243bcf>] do_dentry_open+0x1ff/0x300
[<ffffffff8124afe0>] ? cdev_put+0x30/0x30
[<ffffffff81244d36>] vfs_open+0x56/0x60
[<ffffffff812545f4>] path_openat+0x4f4/0x1190
[<ffffffff81256621>] do_filp_open+0x91/0x100
[<ffffffff81263547>] ? __alloc_fd+0xc7/0x190
[<ffffffff812450df>] do_sys_open+0x13f/0x210
[<ffffffff812451ce>] SyS_open+0x1e/0x20
[<ffffffff81a99e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4

UBI checks static volumes for data consistency and reads the
whole volume upon first open. If the volume is found erroneous
users of UBI cannot read from it, but another volume update is
possible to fix it. The check is performed by running
ubi_eba_read_leb() on every allocated LEB of the volume.
For static volumes ubi_eba_read_leb() computes the checksum of all
data stored in a LEB. To verify the computed checksum it has to read
the LEB's volume header which stores the original checksum.
If the volume header is not found UBI treats this as fatal internal
error and switches to RO mode. If the UBI device was attached via a
full scan the assumption is correct, the volume header has to be
present as it had to be there while scanning to get known as mapped.
If the attach operation happened via Fastmap the assumption is no
longer correct. When attaching via Fastmap UBI learns the mapping
table from Fastmap's snapshot of the system state and not via a full
scan. It can happen that a LEB got unmapped after a Fastmap was
written to the flash. Then UBI can learn the LEB still as mapped and
accessing it returns only 0xFF bytes. As UBI is not a FTL it is
allowed to have mappings to empty PEBs, it assumes that the layer
above takes care of LEB accounting and referencing.
UBIFS does so using the LEB property tree (LPT).
For static volumes UBI blindly assumes that all LEBs are present and
therefore special actions have to be taken.

The described situation can happen when updating a static volume is
interrupted, either by a user or a power cut.
The volume update code first unmaps all LEBs of a volume and then
writes LEB by LEB. If the sequence of operations is interrupted UBI
detects this either by the absence of LEBs, no volume header present
at scan time, or corrupted payload, detected via checksum.
In the Fastmap case the former method won't trigger as no scan
happened and UBI automatically thinks all LEBs are present.
Only by reading data from a LEB it detects that the volume header is
missing and incorrectly treats this as fatal error.
To deal with the situation ubi_eba_read_leb() from now on checks
whether we attached via Fastmap and handles the absence of a
volume header like a data corruption error.
This way interrupted static volume updates will correctly get detected
also when Fastmap is used.

Cc: <stable@vger.kernel.org>
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit f0f39387 ]

Commit ff1e22e7 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.

The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000
RIP: 0010:[<ffffffff810e26e2>]  [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:ffff88003d7bfc50  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8
RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000
R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0
R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff
FS:  0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
 [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0
 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150
 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360
 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180
 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0
 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80
 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140
 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220
 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160
 [<ffffffff810a3830>] ? sort_range+0x30/0x30
 [<ffffffff810a0588>] kthread+0xd8/0xf0
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 702f9260 ]

b4ff8389 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit bf959931 ]

The following program (simplified version of generated by syzkaller)

	#include <pthread.h>
	#include <unistd.h>
	#include <sys/ptrace.h>
	#include <stdio.h>
	#include <signal.h>

	void *thread_func(void *arg)
	{
		ptrace(PTRACE_TRACEME, 0,0,0);
		return 0;
	}

	int main(void)
	{
		pthread_t thread;

		if (fork())
			return 0;

		while (getppid() != 1)
			;

		pthread_create(&thread, NULL, thread_func, NULL);
		pthread_join(thread, NULL);
		return 0;
	}

creates an unreapable zombie if /sbin/init doesn't use __WALL.

This is not a kernel bug, at least in a sense that everything works as
expected: debugger should reap a traced sub-thread before it can reap the
leader, but without __WALL/__WCLONE do_wait() ignores sub-threads.

Unfortunately, it seems that /sbin/init in most (all?) distributions
doesn't use it and we have to change the kernel to avoid the problem.
Note also that most init's use sys_waitid() which doesn't allow __WALL, so
the necessary user-space fix is not that trivial.

This patch just adds the "ptrace" check into eligible_child().  To some
degree this matches the "tsk->ptrace" in exit_notify(), ->exit_signal is
mostly ignored when the tracee reports to debugger.  Or WSTOPPED, the
tracer doesn't need to set this flag to wait for the stopped tracee.

This obviously means the user-visible change: __WCLONE and __WALL no
longer have any meaning for debugger.  And I can only hope that this won't
break something, but at least strace/gdb won't suffer.

We could make a more conservative change.  Say, we can take __WCLONE into
account, or !thread_group_leader().  But it would be nice to not
complicate these historical/confusing checks.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit c0cb8bf3 ]

The length of the GSS MIC token need not be a multiple of four bytes.
It is then padded by XDR to a multiple of 4 B, but unwrap_integ_data()
would previously only trim mic.len + 4 B. The remaining up to three
bytes would then trigger a check in nfs4svc_decode_compoundargs(),
leading to a "garbage args" error and mount failure:

nfs4svc_decode_compoundargs: compound not properly padded!
nfsd: failed to decode arguments!

This would prevent older clients using the pre-RFC 4121 MIC format
(37-byte MIC including a 9-byte OID) from mounting exports from v3.9+
servers using krb5i.

The trimming was introduced by commit 4c190e2f ("sunrpc: trim off
trailing checksum before returning decrypted or integrity authenticated
buffer").

Fixes: 4c190e2f "unrpc: trim off trailing checksum..."
Signed-off-by: Tomáš Trnka <ttrnka@mail.muni.cz>
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 265984b3 ]

The CMD19/CMD14 bus width test has been found to be unreliable in
some cases.  It is not essential, so simply remove it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 32ecd320 ]

008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.

This patch will...

() Increase the long read time quirk timeout from 300ms to 600ms. Original
   author of that quirk says 300ms was only a guess and that the number
   may need to be raised in the future.

() Add this specific MMC to the quirk
Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 7045c368 ]

When we read out the watermark state from the hardware we're supposed to
transfer that into the active watermarks, but currently we fail to any
part of the active watermarks that isn't explicitly written. Let's clear
it all upfront.

Looks like this has been like this since the beginning, when I added the
readout. No idea why I didn't clear it up.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 243e6a44 ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()")
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463151318-14719-2-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 15606534)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 3a17fb32 ]

Grygorii Strashko reports:

 The PM runtime will be left disabled for the device if its
 .suspend_late() callback fails and async suspend is not allowed
 for this device. In this case device will not be added in
 dpm_late_early_list and dpm_resume_early() will ignore this
 device, as result PM runtime will be disabled for it forever
 (side effect: after 8 subsequent failures for the same device
 the PM runtime will be reenabled due to disable_depth overflow).

To fix this problem, add devices to dpm_late_early_list regardless
of whether or not device_suspend_late() returns errors for them.

That will ensure failures in there to be handled consistently for
all devices regardless of their async suspend/resume status.
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>