- 06 Dec, 2018 7 commits
-
-
Chen-Yu Tsai authored
There are different variants to the RTC hardware first seen on sun6i (A31). The differences we care about in this driver are the clock rate for the internal oscillator, prescalers, and the presence of an external clock output. This patch adds support for all the known pre-H6 base compatibles using the variants data structure previously introduced. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Chen-Yu Tsai authored
Amongst the Allwinner SoCs that have seen some kind of coverage by the linux-sunxi community, whether it be mainline Linux or U-boot support, or just available datasheets, most newer chips use the RTC design first seen in the A31 (sun6i). Overall there have been some minor differences. This patch covers the following: - average clock rate of the internal RC oscillator + presence of fixed and adjustable prescaler for this clock - availability of an external (to the SoC) clock output One major difference regarding the H6 is the 24 MHz crystal is now routed through the RTC, as a digitally compensated oscillator (DCXO). This is not covered in this patch and will be supported later. Other differences are either unrelated to RTC or clock functionality, such as boot or crypto related registers, or the driver simply doesn't use the feature in question. One example of the latter is the calibration function for the RC oscillator. We consider this clock to be very bad and avoid using it. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Chen-Yu Tsai authored
The RTC's main clock, used internally and exported to the rest of the SoC, is called "LOSC" (low speed oscillator) through the hardware documentation. This patch adds a default name for this clock, in case the device tree does not provide one. This shouldn't happen, but lets play it safe. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Chen-Yu Tsai authored
Experiments showed that on at least the H3/H5/A64 the RTC's internal oscillator also feeds the CPUS mux in the PRCM. Export this clock through the device tree, instead of having to use a dummy fixed-clock device node, for the PRCM to consume. This will properly describe the relationship between the clocks. Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Chen-Yu Tsai authored
The A31 does not have an external clock output directly from the RTC. Instead, it has four muxable clock outputs: three (A, B, C) are controlled from the CCU, and the last (D) is controlled from the PRCM. Deprecate the usage of the external clock output for the A31 compatible. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Chen-Yu Tsai authored
While doing Bluetooth enablement for various boards based on various Allwinner SoCs, minor differences in the RTC modules were found. These include a lack of an external clock output (A31), different internal oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage settings (H5/H6), and the presence of miscellaneous registers unrelated to the RTC (A64/R40/H5/H6). The datasheet also describes different number of registers for non-volatile storage, though based on actual experiments the actual number is the same across the board. This patch adds a list of all pre-H6 variants, grouped by the internal oscillator's clock rate, regulator settings, and the presence of the external clock output. Combinations are introduced for the variants that have miscellaneous registers. The RTC block in the H6 also handles the 24 MHz DCXO. This will require more device tree binding changes and will be done later. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Chen-Yu Tsai authored
The clock output section for this binding describes the two outputs in the descriptions for both the #clock-cells and clock-output-names properties. Instead of overlapping information that is hard to read, rewrite the clock outputs as a list of indices and descriptions. The properies can reference this list instead. This will also make it easier to add notes or conditions to the clocks, and also for adding new outputs. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 22 Nov, 2018 5 commits
-
-
Baruch Siach authored
The abracon,tc-resistor property value is in kOhm. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Trent Piepho authored
The Linux i2c layer has functions to execute common SMBUS/I2C transactions. The register access code here is identical to the I2C read/write block data routines. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Christophe JAILLET authored
In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Propagate the error code instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Alexandre Belloni authored
Using devm_nvmem_register allows to avoid tracking the nvmem pointer in the rtc_device structure. This ultimately allows to register multiple nvmem devices from an RTC driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Alexandre Belloni authored
Use the resource managed variant of nvmem_register(). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 14 Nov, 2018 4 commits
-
-
Christophe JAILLET authored
In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Commit e115a2bf has modified more than what is said in the commit message. Reverse part of it znd return an error when needed, as it was previously. Fixes: e115a2bf ("rtc: max77686: stop validating rtc_time in .read_time") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Marek Szyprowski authored
(RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD characters. s3c-rtc driver uses only 2 lower of them and supports years from 2000..2099 range. The third BCD value is typically set to 0, but it looks that handling of it is broken in the hardware. It sometimes defaults to a random (even non-BCD) value. This is not an issue for handling RTCYEAR register, because bcd2bin() properly handles only 8bit values (2 BCD characters, the third one is skipped). The problem is however with ALMYEAR register and proper RTC alarm operation. When YEAREN bit is set for the configured alarm, RTC hardware triggers alarm only when ALMYEAR and RTCYEAR matches. This usually doesn't happen because of the random noise on the third BCD character. Fix this by simply skipping setting ALMYEAR register in alarm configuration. This workaround fixes broken alarm operation on Exynos built-in rtc device. My tests revealed that the issue happens on the following Exynos series: 3250, 4210, 4412, 5250 and 5410. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Maciej W. Rozycki authored
Complement commit 85d77047 ("drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions") and correct the remaining places that fail to propagate the error code from SMBus calls. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> References: 85d77047 ("drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Maciej W. Rozycki authored
Add the missing adjustment of the month range on alarm reads from the RTC, correcting an issue coming from commit 9c6dfed9 ("rtc: m41t80: add alarm functionality"). The range is 1-12 for hardware and 0-11 for `struct rtc_time', and is already correctly handled on alarm writes to the RTC. It was correct up until commit 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") too, which removed the previous implementation of alarm support. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: 9c6dfed9 ("rtc: m41t80: add alarm functionality") References: 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 12 Nov, 2018 4 commits
-
-
Alexandre Belloni authored
devm_rtc_device_unregister is not used by any driver and should not be used by any new driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Kuninori Morimoto authored
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Colin Ian King authored
Trivial fix to clean up indentation issues, remove spaces, add missing tabs Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another: drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~ drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/144Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 04 Nov, 2018 9 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "A memory (under-)allocation fix and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Fix off by one bug sched/rt: Update comment in pick_next_task_rt()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates and fixes from Ingo Molnar: "These are almost all tooling updates: 'perf top', 'perf trace' and 'perf script' fixes and updates, an UAPI header sync with the merge window versions, license marker updates, much improved Sparc support from David Miller, and a number of fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits) perf intel-pt/bts: Calculate cpumode for synthesized samples perf intel-pt: Insert callchain context into synthesized callchains perf tools: Don't clone maps from parent when synthesizing forks perf top: Start display thread earlier tools headers uapi: Update linux/if_link.h header copy tools headers uapi: Update linux/netlink.h header copy tools headers: Sync the various kvm.h header copies tools include uapi: Update linux/mmap.h copy perf trace beauty: Use the mmap flags table generated from headers perf beauty: Wire up the mmap flags table generator to the Makefile perf beauty: Add a generator for MAP_ mmap's flag constants tools include uapi: Update asound.h copy tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies tools include uapi: Update linux/fs.h copy perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc} perf cs-etm: Correct CPU mode for samples perf unwind: Take pgoff into account when reporting elf to libdwfl perf top: Do not use overwrite mode by default perf top: Allow disabling the overwrite mode perf trace: Beautify mount's first pathname arg ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
-
- 03 Nov, 2018 11 commits
-
-
Peter Zijlstra authored
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca0 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull more arm64 updates from Catalin Marinas: - fix W+X page (mark RO) allocated by the arm64 kprobes code - Makefile fix for .i files in out of tree modules * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobe: make page to RO mode when allocate it arm64: kdump: fix small typo arm64: makefile fix build of .i file in external module case
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: "Avoid compile warnings on non-default arm64 configs" * tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mapping: arm64: fix warnings without CONFIG_IOMMU_DMA
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes and updates from Steve French: "Three small fixes (one Kerberos related, one for stable, and another fixes an oops in xfstest 377), two helpful debugging improvements, three patches for cifs directio and some minor cleanup" * tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix signed/unsigned mismatch on aio_read patch cifs: don't dereference smb_file_target before null check CIFS: Add direct I/O functions to file_operations CIFS: Add support for direct I/O write CIFS: Add support for direct I/O read smb3: missing defines and structs for reparse point handling smb3: allow more detailed protocol info on open files for debugging smb3: on kerberos mount if server doesn't specify auth type use krb5 smb3: add trace point for tree connection cifs: fix spelling mistake, EACCESS -> EACCES cifs: fix return value for cifs_listxattr
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull 9p fix from Al Viro: "Regression fix for net/9p handling of iov_iter; broken by braino when switching to iov_iter_is_kvec() et.al., spotted and fixed by Marc" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: Fix 9p virtio breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor small (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mvsas: Remove set but not used variable 'id' scsi: qla2xxx: Remove two arguments from qlafx00_error_entry() scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res' scsi: qla2xxx: Remove a set-but-not-used variable scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze scsi: qla2xxx: Declare local functions 'static' scsi: qla2xxx: Improve several kernel-doc headers scsi: qla2xxx: Modify fall-through annotations scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb scsi: mvsas: Use dma_pool_zalloc scsi: target: Don't request modules that aren't even built scsi: target: Set response length for REPORT TARGET PORT GROUPS
-
Linus Torvalds authored
Merge more updates from Andrew Morton: - more ocfs2 work - various leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: memory_hotplug: cond_resched in __remove_pages bfs: add sanity check at bfs_fill_super() kernel/sysctl.c: remove duplicated include kernel/kexec_file.c: remove some duplicated includes mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask ocfs2: fix clusters leak in ocfs2_defrag_extent() ocfs2: dlmglue: clean up timestamp handling ocfs2: don't put and assigning null to bh allocated outside ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry ocfs2: don't use iocb when EIOCBQUEUED returns ocfs2: without quota support, avoid calling quota recovery ocfs2: remove ocfs2_is_o2cb_active() mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings include/linux/notifier.h: SRCU: fix ctags mm: handle no memcg case in memcg_kmem_charge() properly
-
Michal Hocko authored
We have received a bug report that unbinding a large pmem (>1TB) can result in a soft lockup: NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365] [...] Supported: Yes CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4 Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000 RIP: 0010:__put_page+0x62/0x80 Call Trace: devm_memremap_pages_release+0x152/0x260 release_nodes+0x18d/0x1d0 device_release_driver_internal+0x160/0x210 unbind_store+0xb3/0xe0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x150 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fd13166b3d0 It has been reported on an older (4.12) kernel but the current upstream code doesn't cond_resched in the hot remove code at all and the given range to remove might be really large. Fix the issue by calling cond_resched once per memory section. Link: http://lkml.kernel.org/r/20181031125840.23982-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-