- 13 Nov, 2018 40 commits
-
-
Jim Mattson authored
[ Upstream commit cfb634fe ] According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit qualification field for debug exceptions are reserved (cleared to 0). However, the SDM is incorrect about bit 16 (corresponding to DR6.RTM). This bit should be set if a debug exception (#DB) or a breakpoint exception (#BP) occurred inside an RTM region while advanced debugging of RTM transactional regions was enabled. Note that this is the opposite of DR6.RTM, which "indicates (when clear) that a debug exception (#DB) or breakpoint exception (#BP) occurred inside an RTM region while advanced debugging of RTM transactional regions was enabled." There is still an issue with stale DR6 bits potentially being misreported for the current debug exception. DR6 should not have been modified before vectoring the #DB exception, and the "new DR6 bits" should be available somewhere, but it was and they aren't. Fixes: b96fb439 ("KVM: nVMX: fixes to nested virt interrupt injection") Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
[ Upstream commit 9607871f ] The following code in the linux/ndctl header file: static inline const char *nvdimm_bus_cmd_name(unsigned cmd) { static const char * const names[] = { [ND_CMD_ARS_CAP] = "ars_cap", [ND_CMD_ARS_START] = "ars_start", [ND_CMD_ARS_STATUS] = "ars_status", [ND_CMD_CLEAR_ERROR] = "clear_error", [ND_CMD_CALL] = "cmd_call", }; if (cmd < ARRAY_SIZE(names) && names[cmd]) return names[cmd]; return "unknown"; } is broken in a number of ways: (1) ARRAY_SIZE() is not generally defined. (2) g++ does not support "non-trivial" array initialisers fully yet. (3) Every file that calls this function will acquire a copy of names[]. The same goes for nvdimm_cmd_name(). Fix all three by converting to a switch statement where each case returns a string. That way if cmd is a constant, the compiler can trivially reduce it and, if not, the compiler can use a shared lookup table if it thinks that is more efficient. A better way would be to remove these functions and their arrays from the header entirely. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit fd47d919 ] If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaf ("[SCSI] m68k: new mac_esp scsi driver") Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Michal Hocko authored
[ Upstream commit a90e90b7 ] We have seen a customer complaining about soft lockups on !PREEMPT kernel config with 4.4 based kernel [1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1] [1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4 [1072141.444146] Supported: Yes [1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1 [1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018 [1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000 [1072141.444153] RIP: 0010:[<ffffffff815229f9>] [<ffffffff815229f9>] update_classid_sock+0x29/0x40 [1072141.444157] RSP: 0018:ffff880191bd7d58 EFLAGS: 00000286 [1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000 [1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200 [1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000 [1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0 [1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28 [1072141.444163] FS: 00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000 [1072141.444164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0 [1072141.444166] Stack: [1072141.444166] ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0 [1072141.444168] ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea [1072141.444170] ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0 [1072141.444171] Call Trace: [1072141.444179] [<ffffffff8121d583>] iterate_fd+0x53/0x80 [1072141.444182] [<ffffffff81522b1c>] write_classid+0x4c/0x80 [1072141.444187] [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100 [1072141.444193] [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150 [1072141.444198] [<ffffffff81201566>] __vfs_write+0x26/0x100 [1072141.444201] [<ffffffff81201bed>] vfs_write+0x9d/0x190 [1072141.444203] [<ffffffff812028c2>] SyS_write+0x42/0xa0 [1072141.444207] [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca [1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca If a cgroup has many tasks with many open file descriptors then we would end up in a large loop without any rescheduling point throught the operation. Add cond_resched once per task. Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 760eea43 ] The workqueue used for monitoring the hardware may run while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e ("thermal: Prevent polling from happening during system suspend"). Fixes: 608567aa ("thermal: da9062/61: Thermal junction temperature monitoring driver") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Martin Willi authored
[ Upstream commit a9911937 ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Sebastian Basierski authored
[ Upstream commit 7fb94bd5 ] While VF2VF with RSS communication, RSS Type were wrongly recognized and RSS hash was not calculated as it should be. Packets was distributed on various queues by accident. This commit fixes that behaviour and causes proper RSS Type recognition. Signed-off-by:
Sebastian Basierski <sebastianx.basierski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Sara Sharon authored
[ Upstream commit 941ab4eb ] There is a bug in FW where the sequence control may be incorrect, and the driver overrides it with the value of the ieee80211 header. However, in BAR there is no sequence control in the header, which result with arbitrary sequence. This access to an unknown location is bad and it makes the logs very confusing - so fix it. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit c309b158 ] After changing to the needed page, actually write the value to the register! Fixes: 09cb7dfd ("net: dsa: mv88e6xxx: describe PHY page and SerDes") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit b432414b ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc2 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828 ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-gpio has the same problem. Let's fix it there too. Fixes: b4c45fe9 ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 0d5b476f ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc2 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828 ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-mpp has the same problem. Let's fix it there too. NOTE: in case it's helpful to someone reading this, the way to tell whether to do the -EINVAL or not is to look at the PCONFDUMP for a given attribute. If the last element (has_arg) is false then you need to do the -EINVAL trick. ALSO NOTE: it seems unlikely that the values returned when we try to get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg" is false for that one, but I guess it's still fine to return different values so I kept doing that. It seems like another driver (ssbi-gpio) uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something similar so maybe a future change should do that here too. Fixes: cfb24f6e ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver") Signed-off-by:
-
Stephen Boyd authored
[ Upstream commit 89c68b10 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Hans de Goede authored
[ Upstream commit 24071406 ] Bay and Cherry Trail DSTDs represent a different set of devices depending on which OS the device think it is booting. One set of decices for Windows and another set of devices for Android which targets the Android-x86 Linux kernel fork (which e.g. used to have its own display driver instead of using the i915 driver). Which set of devices we are actually going to get is out of our control, this is controlled by the ACPI OSID variable, which gets either set through an EFI setup option, or sometimes is autodetected. So we need to support both. This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we get for the first resp. second DMA controller on Cherry Trail devices when OSID is set to Android. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 819319fc ] Make reuse_unused_kprobe() to return error code if it fails to reuse unused kprobe for optprobe instead of calling BUG_ON(). Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Paolo Valente authored
[ Upstream commit cbeb869a ] BFQ schedules entities (which represent either per-process queues or groups of queues) as a function of their timestamps. In particular, as a function of their (virtual) finish times. The finish time of an entity is computed as a function of the budget assigned to the entity, assuming, tentatively, that the entity, once in service, will receive an amount of service equal to its budget. Then, when the entity is expired because it finishes to be served, this finish time is updated as a function of the actual service received by the entity. This allows the entity to be correctly charged with only the service received, and then to be correctly re-scheduled. Yet an entity may receive service also while not being the entity in service (in the scheduling environment of its parent entity), for several reasons. If the entity remains with no backlog while receiving this 'unofficial' service, then it is expired. Also on such an expiration, the finish time of the entity should be updated to account for only the service actually received by the entity. Unfortunately, such an update is not performed for an entity expiring without being the entity in service. In a similar vein, the service counter of the entity in service is reset when the entity is expired, to be ready to be used for next service cycle. This reset too should be performed also in case an entity is expired because it remains empty after receiving service while not being the entity in service. But in this case the reset is not performed. This commit performs the above update of the finish time and reset of the service received, also for an entity expiring while not being the entity in service. Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit aeeb2e8f ] Phylink made an assumption about the carrier state being down when calling phylink_start(). If this assumption isn't satisfied, the internal phylink state could misbehave and a net device could end up not being functional. This patch fixes this by explicitly calling netif_carrier_off() in phylink_start(). Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Arend van Spriel authored
[ Upstream commit 330994e8 ] Decoding of firmware channel information was not complete for 160MHz support. This resulted in the following warning: WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196 brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil] Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ... CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G O 4.17.0-wt-testing-x64-00002-gf1bed50 #1 Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 Workqueue: events request_firmware_work_func RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil] RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206 RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0 RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30 RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80 R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000 R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0 FS: 0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0 Call Trace: brcmf_setup_wiphybands+0x212/0x780 [brcmfmac] brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac] brcmf_attach+0x1fc/0x4b0 [brcmfmac] ? __kmalloc+0x13c/0x1c0 brcmf_pcie_setup+0x99b/0xe00 [brcmfmac] brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac] request_firmware_work_func+0x36/0x60 process_one_work+0x146/0x350 worker_thread+0x4a/0x3b0 kthread+0x102/0x140 ? process_one_work+0x350/0x350 ? kthread_bind+0x20/0x20 ret_from_fork+0x35/0x40 Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38 66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f> 0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66 ---[ end trace 550c46682415b26d ]--- brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50 This patch adds the missing stuff to properly handle this. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 69f8455f ] 'ret' should be returned while pmic_mpp_write_mode_ctl fails. Fixes: 0e948042 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 9c1442a9 ] We currently align the end of the compressed image to a multiple of 16. However, the PE-COFF header included in the EFI stub says that the file alignment is 32 bytes, and when adding an EFI signature to the file it must first be padded to this alignment. sbsigntool commands warn about this: warning: file-aligned section .text extends beyond end of file warning: checksum areas are greater than image size. Invalid section table? Worse, pesign -at least when creating a detached signature- uses the hash of the unpadded file, resulting in an invalid signature if padding is required. Avoid both these problems by increasing alignment to 32 bytes when CONFIG_EFI_STUB is enabled. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Christian Hewitt authored
[ Upstream commit a357ea09 ] This patch adds the device ID for the AMPAK AP6335 combo module used in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI chip identifies itself as BCM4339, while Bluetooth identifies itself as BCM4335 (rev C0): ``` [ 4.864248] Bluetooth: hci0: BCM: chip id 86 [ 4.866388] Bluetooth: hci0: BCM: features 0x2f [ 4.889317] Bluetooth: hci0: BCM4335C0 [ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000 [ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268 ``` Output from hciconfig: ``` hci0: Type: Primary Bus: UART BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:7567 acl:234 sco:0 events:386 errors:0 TX bytes:53844 acl:77 sco:0 commands:304 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'HUB' Class: 0x0c0000 Service Classes: Rendering, Capturing Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x10c LMP Version: 4.0 (0x6) Subversion: 0x6109 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 22839869 ] The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by:
Steve McIntyre <steve.mcintyre@arm.com> Tested-by:
Steve McIntyre <93sam@debian.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit fbed2028 ] There is a potential execution path in which function of_find_compatible_node() returns NULL. In such a case, we end up having a NULL pointer dereference when accessing pointer *nfc_np* in function of_clk_get(). So, we better don't take any chances and fix this by null checking pointer *nfc_np* before calling of_clk_get(). Addresses-Coverity-ID: 1473052 ("Dereference null return value") Fixes: f88fc122 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit 51c99dd2 ] We can not call dev_pm_opp_of_cpumask_remove_table() freely anymore since the latest OPP core updates as that uses reference counting to free resources. There are cases where no static OPPs are added (using DT) for a platform and trying to remove the OPP table may end up decrementing refcount which is already zero and hence generating warnings. Lets track if we were able to add static OPPs or not and then only remove the table based on that. Some reshuffling of code is also done to do that. Reported-by:
Niklas Cassel <niklas.cassel@linaro.org> Tested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Dou Liyang authored
[ Upstream commit d0381bf4 ] ACPI driver should make sure all the processor IDs in their ACPI Namespace are unique. the driver performs a depth-first walk of the namespace tree and calls the acpi_processor_ids_walk() to check the duplicate IDs. But, the acpi_processor_ids_walk() mistakes the return value. If a processor is checked, it returns true which causes the walk break immediately, and other processors will never be checked. Repace the value with AE_OK which is the standard acpi_status value. And don't abort the namespace walk even on error. Fixes: 8c8cb30f (acpi/processor: Implement DEVICE operator for processor enumeration) Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit d92116b8 ] On OLPC XO-1, the RTC is discovered via device tree from the arch initcall. Don't let the PC platform register another one from its device initcall, it's not going to work: sysfs: cannot create duplicate filename '/devices/platform/rtc_cmos' CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #12 Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014 Call Trace: dump_stack+0x16/0x18 sysfs_warn_dup+0x46/0x58 sysfs_create_dir_ns+0x76/0x9b kobject_add_internal+0xed/0x209 ? __schedule+0x3fa/0x447 kobject_add+0x5b/0x66 device_add+0x298/0x535 ? insert_resource_conflict+0x2a/0x3e platform_device_add+0x14d/0x192 ? io_delay_init+0x19/0x19 platform_device_register+0x1c/0x1f add_rtc_cmos+0x16/0x31 do_one_initcall+0x78/0x14a ? do_early_param+0x75/0x75 kernel_init_freeable+0x152/0x1e0 ? rest_init+0xa2/0xa2 kernel_init+0x8/0xd5 ret_from_fork+0x2e/0x38 kobject_add_internal failed for rtc_cmos with -EEXIST, don't try to register things with the same name in the same directory. platform rtc_cmos: registered platform RTC device (no PNP device found) Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Thomas Gleixner <tglx@linutronix.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181004160808.307738-1-lkundrak@v3.skSigned-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit 155f7e04 ] Fix a bug that happens in the following scenario: 1) suspend without WoWLAN 2) mac80211 calls drv_stop because of the suspend 3) __iwl_mvm_mac_stop deallocates the aux station 4) during drv_stop the firmware crashes 5) iwlmvm: * sets IWL_MVM_STATUS_HW_RESTART_REQUESTED * asks mac80211 to kick the restart flow 6) mac80211 puts the restart worker into a freezable queue which means that the worker will not run for now since the workqueue is already frozen 7) ... 8) resume 9) mac80211 runs ieee80211_reconfig as part of the resume 10) mac80211 detects that a restart flow has been requested and that we are now resuming from suspend and cancels the restart worker 11) mac80211 calls drv_start() 12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls iwl_mvm_restart_cleanup() 13) iwl_fw_error_dump gets called and accesses the device to get debug data 14) iwl_mvm_up adds the aux station 15) iwl_mvm_add_aux_sta() allocates an internal station for the aux station 16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART and doesn't really allocate a station ID for the aux station 17) a new queue is added for the aux station Note that steps from 5 to 9 aren't really part of the problem but were described for the sake of completeness. Once the iwl_mvm_mac_stop() is called, the device is not accessible, meaning that step 12) can't succeed and we'll see the following: drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]() Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8) Call Trace: [<ffffffffc03e6ad3>] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi] [<ffffffffc03e6a13>] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi] [<ffffffffc03dad42>] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi] [<ffffffffc04bd43e>] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm] [<ffffffffc04bd6d2>] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm] [<ffffffffc042d378>] drv_start+0xa1/0xc5 [iwl7000_mac80211] [<ffffffffc045a339>] ieee80211_reconfig+0x145/0xf50 [mac80211] [<ffffffffc044788b>] ieee80211_resume+0x62/0x66 [mac80211] [<ffffffffc0366c5b>] wiphy_resume+0xa9/0xc6 [cfg80211] The station id of the aux station is set to 0xff in step 3 and because we don't really allocate a new station id for the auxliary station (as explained in 16), we end up sending a command to the firmware asking to connect the queue to station id 0xff. This makes the firmware crash with the following information: 0x00002093 | ADVANCED_SYSASSERT 0x000002F0 | trm_hw_status0 0x00000000 | trm_hw_status1 0x00000B38 | branchlink2 0x0001978C | interruptlink1 0x00000000 | interruptlink2 0xFF080501 | data1 0xDEADBEEF | data2 0xDEADBEEF | data3 Firmware error during reconfiguration - reprobe! FW error in SYNC CMD SCD_QUEUE_CFG Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED in iwl_mvm_mac_stop(). We won't be able to collect debug data anyway and when we will brought up again, we will have a clean state from the firmware perspective. Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in step 12) we won't get to the 2093 ASSERT either. Fixes: bf8b286f ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Shaul Triebitz authored
[ Upstream commit 868a1e86 ] If all free RB queues are empty, the driver will never restock the free RB queue. That's because the restocking happens in the Rx flow, and if the free queue is empty there will be no Rx. Although there's a background worker (a.k.a. allocator) allocating memory for RBs so that the Rx handler can restock them, the worker may run only after the free queue has become empty (and then it is too late for restocking as explained above). There is a solution for that called 'emergency': If the number of used RB's reaches half the amount of all RB's, the Rx handler will not wait for the allocator but immediately allocate memory for the used RB's and restock the free queue. But, since the used RB's is per queue, it may happen that the used RB's are spread between the queues such that the emergency check will fail for each of the queues (and still run out of RBs, causing the above symptom). To fix it, move to emergency mode if the sum of *all* used RBs (for all Rx queues) reaches half the amount of all RB's Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Yu Zhao authored
[ Upstream commit 51698949 ] This device reports SDHCI_CLOCK_INT_STABLE even though it's not ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 | SDHCI_CLOCK_CARD_EN but only observed the first operand). mmc1: Timeout waiting for hardware cmd interrupt. mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603 mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001 mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083 mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077 mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8 mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc1: sdhci: Host ctl2: 0x00000008 mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 mmc1: sdhci: ============================================ The problem happens during wakeup from S3. Adding a delay quirk after power up reliably fixes the problem. Signed-off-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit f69ffc5d ] cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR (0xC0010064 + state number) set to zero. As a result fid and did are zero and the crash occurs because of a divide by zero (cof = fid/did). This can be prevented by checking the enable bit in the PStateDef MSR before calculating cof. By doing this the value of pstate[i] remains zero and the value can be tested before displaying the active Pstates. Check the enable bit in the PstateDef register for all supported families and only print out enabled Pstates. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Sanskriti Sharma authored
[ Upstream commit ce49d843 ] Ensure that all code paths in strbuf_addv() call va_end() on the ap_saved copy that was made. Fixes the following coverity complaint: Error: VARARGS (CWE-237): [#def683] tools/perf/util/strbuf.c:106: missing_va_end: va_end was not called for "ap_saved". Signed-off-by:
Sanskriti Sharma <sansharm@redhat.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Link: http://lkml.kernel.org/r/1538490554-8161-2-git-send-email-sansharm@redhat.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sanskriti Sharma authored
[ Upstream commit faedbf3f ] Free tracing_data structure in tracing_data_get() error paths. Fixes the following coverity complaint: Error: RESOURCE_LEAK (CWE-772): leaked_storage: Variable "tdata" going out of scope leaks the storage Signed-off-by:
-
Sanskriti Sharma authored
[ Upstream commit 1e44224f ] For each system in a given pevent, read_event_files() reads in a temporary 'sys' string. Be sure to free this string before moving onto to the next system and/or leaving read_event_files(). Fixes the following coverity complaints: Error: RESOURCE_LEAK (CWE-772): tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting "sys" in "sys = read_string()" leaks the storage that "sys" points to. tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys" going out of scope leaks the storage it points to. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit a1108c7b ] Clang warns when one enumerated type is implicitly converted to another. drivers/spi/spi-ep93xx.c:342:62: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:428:58: note: expanded from macro 'dma_map_sg' #define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:348:57: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:377:56: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ 3 warnings generated. dma_{,un}map_sg expect an enum of type dma_data_direction but this driver uses dma_transfer_direction for everything. Convert the driver to use dma_data_direction for these two functions. There are two places that strictly require an enum of type dma_transfer_direction: the direction member in struct dma_slave_config and the direction parameter in dmaengine_prep_slave_sg. To avoid using an explicit cast, add a simple function, ep93xx_dma_data_to_trans_dir, to safely map between the two types because they are not 1 to 1 in meaning. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 7325b4bb ] The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] nvm_dev_dma_alloc(GFP_KERNEL) drivers/lightnvm/pblk-core.c, 754: nvm_dev_dma_alloc in pblk_line_submit_smeta_io drivers/lightnvm/pblk-core.c, 1048: pblk_line_submit_smeta_io in pblk_line_init_bb drivers/lightnvm/pblk-core.c, 1434: pblk_line_init_bb in pblk_line_replace_data drivers/lightnvm/pblk-recovery.c, 980: pblk_line_replace_data in pblk_recov_l2p drivers/lightnvm/pblk-recovery.c, 976: spin_lock in pblk_recov_l2p [FUNC] bio_map_kern(GFP_KERNEL) drivers/lightnvm/pblk-core.c, 762: bio_map_kern in pblk_line_submit_smeta_io drivers/lightnvm/pblk-core.c, 1048: pblk_line_submit_smeta_io in pblk_line_init_bb drivers/lightnvm/pblk-core.c, 1434: pblk_line_init_bb in pblk_line_replace_data drivers/lightnvm/pblk-recovery.c, 980: pblk_line_replace_data in pblk_recov_l2p drivers/lightnvm/pblk-recovery.c, 976: spin_lock in pblk_recov_l2p To fix these bugs, the call to pblk_line_replace_data() is moved out of the spinlock protection. These bugs are found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 95dcd64b ] Technically this is not required because disabling the PWM should be enough. However, when support for atomic operations was implemented in the PWM subsystem, only actual changes to the PWM channel are applied during pwm_config(), which means that during after resume from suspend the old settings won't be applied. One possible solution is for the PWM driver to implement its own PM operations such that settings from before suspend get applied on resume. This has the disadvantage of completely ignoring any particular ordering requirements that PWM user drivers might have, so it is best to leave it up to the user drivers to apply the settings that they want at the appropriate time. Another way to solve this would be to read back the current state of the PWM at the time of resume. That way, in case the configuration was lost during suspend, applying the old settings in PWM user drivers would actually get them applied because they differ from the current settings. However, not all PWM drivers support reading the hardware state, and not all hardware may support it. The best workaround at this point seems to be to let PWM user drivers tell the PWM subsystem that the PWM is turned off by, in addition to disabling it, also setting the duty cycle to 0. This causes the resume operation to apply a configuration that is different from the current configuration, resulting in the proper state from before suspend getting restored. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Janosch Frank authored
[ Upstream commit b5130dc2 ] When running as a level 3 guest with no host provided sthyi support sclp_ocf_cpc_name_copy() will only return zeroes. Zeroes are not a valid group name, so let's not indicate that the group name field is valid. Also the group name is not dependent on stsi, let's not return based on stsi before setting it. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Serhey Popovych authored
[ Upstream commit df52eab2 ] Configuring generic network device parameters on tun will fail in presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute since tun_validate() always return failure. This can be visualized with following ip-link(8) command sequences: # ip link set dev tun0 group 100 # ip link set dev tun0 group 100 type tun RTNETLINK answers: Invalid argument with contrast to dummy and veth drivers: # ip link set dev dummy0 group 100 # ip link set dev dummy0 type dummy # ip link set dev veth0 group 100 # ip link set dev veth0 group 100 type veth Fix by returning zero in tun_validate() when @data is NULL that is always in case since rtnl_link_ops->maxtype is zero in tun driver. Fixes: f019a7a5 ("tun: Implement ip link del tunXXX") Signed-off-by:
Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
-
Ryan C Goodfellow authored
[ Upstream commit 5948185b ] This commit makes it possible to use devlink to split the 100G CXP Netronome into two 40G interfaces. Currently when you ask for 2 interfaces, the math in src/nfp_devlink.c:nfp_devlink_port_split calculates that you want 5 lanes per port because for some reason eth_port.port_lanes=10 (shouldn't this be 12 for CXP?). What we really want when asking for 2 breakout interfaces is 4 lanes per port. This commit makes that happen by calculating based on 8 lanes if 10 are present. Signed-off-by:
Ryan C Goodfellow <rgoodfel@isi.edu> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Greg Weeks <greg.weeks@netronome.com> Signed-off-by:
-
Omar Sandoval authored
[ Upstream commit 1448a2a5 ] If we fail to allocate the request queue for a disk, we still need to free that disk, not just the previous ones. Additionally, we need to cleanup the previous request queues. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Omar Sandoval authored
[ Upstream commit 71327f54 ] Move queue allocation next to disk allocation to fix a couple of issues: - If add_disk() hasn't been called, we should clear disk->queue before calling put_disk(). - If we fail to allocate a request queue, we still need to put all of the disks, not just the ones that we allocated queues for. Signed-off-by:
-
