- 23 Jul, 2021 4 commits
-
-
Matthew Auld authored
The CPU domain should be static for discrete, and on DG1 we don't need any flushing since everything is already coherent, so really all this does is an object wait, for which we have an ioctl. Longer term the desired caching should be an immutable creation time property for the BO, which can be set with something like gem_create_ext. One other user is iris + userptr, which uses the set_domain to probe all the pages to check if the GUP succeeds, however we now have a PROBE flag for this purpose. v2: add some more kernel doc, also add the implicit rules with caching Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Acked-by:
Kenneth Graunke <kenneth@whitecape.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com
-
Tvrtko Ursulin authored
On Xe_HP the fusing register is renamed and changed to have the "enable" semantics, but otherwise remains compatible (mmio address, bitmask ranges) with older platforms. To simplify things we do not add a new register definition but just stop inverting the fusing masks before processing them. Bspec: 52615 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-6-matthew.d.roper@intel.com
-
Lucas De Marchi authored
We kept adding new engines and for that increasing hw_id unnecessarily: it's not used since GRAPHICS_VER == 8. Prepend "gen6" to the field and try to pack it in the structs to give a hint this field is actually not used in recent platforms. Signed-off-by:
-
Lucas De Marchi authored
The engine hw_id is only used by RING_FAULT_REG(), which is not used by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set the engine's guc_id, but that is not the case anymore since commit c784e524 ("drm/i915/guc: Update to use firmware v49.0.1"): now we only use class and id information to generate guc_id. We tend to keep adding new defines just to be consistent, but let's try to remove them and let them defined to 0 for engines that only exist on gen8+ platforms. v2: Reword commit message and add information about when we stopped using hw_id (Matt Roper) Signed-off-by:
-
- 22 Jul, 2021 34 commits
-
-
Lucas De Marchi authored
gen8_clear_engine_error_register() is actually not used by GRAPHICS_VER >= 8, since for those we are using another register that is not engine-dependent. Fix the platform prefix, to make clear we are not using any GEN6_RING_FAULT_REG_* one GRAPHICS_VER >= 8. Signed-off-by:
-
Matthew Brost authored
Add intel_context tracing. These trace points are particular helpful when debugging the GuC firmware and can be enabled via CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS kernel config option. Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Matthew Brost authored
Add trace point for GuC submit. Extended existing request trace points to include submit fence value,, guc_id, and ring tail value. v2: Fix white space alignment in i915_request_add trace point v3: Delete dep_from , dep_to (Tvrtko) Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Update GuC debugfs to support the new GuC structures. v2: (John Harrison) - Remove intel_lrc_reg.h include from i915_debugfs.c (Michal) - Rename GuC debugfs functions Signed-off-by:
-
Matthew Brost authored
When running the GuC the GPU can't be considered idle if the GuC still has contexts pinned. As such, a call has been added in intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for the number of unpinned contexts to go to zero. v2: rtimeout -> remaining_timeout v3: Drop unnecessary includes, guc_submission_busy_loop -> guc_submission_send_busy_loop, drop negatie timeout trick, move a refactor of guc_context_unpin to earlier path (John H) v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle function if not in GuC submission mode Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Ensure G2H response has space in the buffer before sending H2G CTB as the GuC can't handle any backpressure on the G2H interface. v2: (Matthew) - s/INTEL_GUC_SEND/INTEL_GUC_CT_SEND v3: (Matthew) - Add G2H credit accounting to blocking path, add g2h_release_space helper (John H) - CTB_G2H_BUFFER_SIZE / 4 == G2H_ROOM_BUFFER_SIZE Signed-off-by: -
Matthew Brost authored
Semaphores are an optimization and not required for basic GuC submission to work properly. Disable until we have time to do the implementation to enable semaphores and tune them for performance. Also long direction is just to delete semaphores from the i915 so another reason to not enable these for GuC submission. This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was not honored correctly. v2: Reword commit message v3: (John H) - Add text to commit indicating this also fixing an existing bug v4: (John H) - s/bug/bugs Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
If two requests are on the same ring, they are explicitly ordered by the HW. So, a submission fence is sufficient to ensure ordering when using the new GuC submission interface. Conversely, if two requests share a timeline and are on the same physical engine but different context this doesn't ensure ordering on the new GuC submission interface. So, a completion fence needs to be used to ensure ordering. v2: (Daniele) - Don't delete spin lock v3: (Daniele) - Delete forward dec Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Matthew Brost authored
Disable preempt busywait when using GuC scheduling. This isn't needed as the GuC controls preemption when scheduling. v2: (John H): - Fix commit message Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Extend the deregistration context fence to fence whne a GuC context has scheduling disable pending. v2: (John H) - Update comment why we check the pin count within spin lock Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Disable engine barriers for unpinning with GuC. This feature isn't needed with the GuC as it disables context scheduling before unpinning which guarantees the HW will not reference the context. Hence it is not necessary to defer unpinning until a kernel context request completes on each engine in the context engine mask. Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
With GuC scheduling, it isn't safe to unpin a context while scheduling is enabled for that context as the GuC may touch some of the pinned state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is done, a call back is added to intel_context_unpin when pin count == 1 to disable scheduling for that context. When the response CTB is received it is safe to do the final unpin. Future patches may add a heuristic / delay to schedule the disable call back to avoid thrashing on schedule enable / disable. v2: (John H) - s/drm_dbg/drm_err (Daneiel) - Clean up sched state function Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Sometimes during context pinning a context with the same guc_id is registered with the GuC. In this a case deregister must be done before the context can be registered. A fence is inserted on all requests while the deregister is in flight. Once the G2H is received indicating the deregistration is complete the context is registered and the fence is released. v2: (John H) - Fix commit message Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Implement GuC context operations which includes GuC specific operations alloc, pin, unpin, and destroy. v2: (Daniel Vetter) - Use msleep_interruptible rather than cond_resched in busy loop (Michal) - Remove C++ style comment v3: (Matthew Brost) - Drop GUC_ID_START (John Harrison) - Fix a bunch of typos - Use drm_err rather than drm_dbg for G2H errors (Daniele) - Fix ;; typo - Clean up sched state functions - Add lockdep for guc_id functions - Don't call __release_guc_id when guc_id is invalid - Use MISSING_CASE - Add comment in guc_context_pin - Use shorter path to rpm (Daniele / CI) - Don't call release_guc_id on an invalid guc_id in destroy v4: (Daniel Vetter) - Add FIXME comment Signed-off-by:
-
Matthew Brost authored
Add bypass tasklet submission path to GuC. The tasklet is only used if H2G channel has backpresure. Signed-off-by:
-
Matthew Brost authored
Implement GuC submission tasklet for new interface. The new GuC interface uses H2G to submit contexts to the GuC. Since H2G use a single channel, a single tasklet is used for the submission path. Also the per engine interrupt handler has been updated to disable the rescheduling of the physical engine tasklet, when using GuC scheduling, as the physical engine tasklet is no longer used. In this patch the field, guc_id, has been added to intel_context and is not assigned. Patches later in the series will assign this value. v2: (John Harrison) - Clean up some comments v3: (John Harrison) - More comment cleanups Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Add LRC descriptor context lookup array which can resolve the intel_context from the LRC descriptor index. In addition to lookup, it can determine if the LRC descriptor context is currently registered with the GuC by checking if an entry for a descriptor index is present. Future patches in the series will make use of this array. v2: (Michal) - "linux/xarray.h" -> <linux/xarray.h> - s/lrc/LRC (John H) - Fix commit message Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Remove old GuC stage descriptor, add LRC descriptor which will be used by the new GuC interface implemented in this patch series. v2: (John Harrison) - s/lrc/LRC/g Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Add new GuC interface defines and structures while maintaining old ones in parallel. Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Prathap Kumar Valsan authored
The layout of some engine contexts has changed on Xe_HP. Define the new offsets. Bspec: 45585, 46256 Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
-
Stuart Summers authored
Xe_HP changes the format of the context ID from past platforms. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
-
John Harrison authored
Increasing the engine count causes a couple of local array variables to exceed the kernel stack limit. So make them dynamic allocations instead. Signed-off-by:
-
Venkata Sandeep Dhanalakota authored
In Gen12 there are various fuse combinations and in each configuration vdbox engine may be connected to SFC depending on which engines are available, so we need to set the SFC capability based on fuse value from the hardware. Even numbered physical instance always have SFC, odd numbered physical instances have SFC only if previous even instance is fused off. v2: - Minor style & typo fixes (Tvrtko) - Drop an unwanted 'inline' (Tvrtko) Bspec: 48028 Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by:
-
Matt Roper authored
As we begin applying XeHP and DG2 patches, the basic platform definitions and macros (like IS_DG2()) will be needed in both drm-intel-next and drm-intel-gt-next. Those initial definition patches are applied to a topic branch and merged to both trees. Signed-off-by: -
Matt Roper authored
DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics. There are two variants (treated as subplatforms in the code): DG2-G10 and DG2-G11 that require independent programming in some areas (e.g., workarounds). Bspec: 44472, 44474, 46197, 48028, 48077 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com
-
Lucas De Marchi authored
XeHP SDV is a Intel
® dGPU without display. This is just the definition of some basic platform macros, by large a copy of current state of Tigerlake which does not reflect the end state of this platform. v2: - Switch to intel_step infrastructure for stepping matches. (Jani) v3: - Bring earlier in patch series and leave addition of new media engines to the engine mask for a later patch. Bspec: 44467, 48077 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Our _FEATURES macro went back to GEN7, extending each other, making it difficult to grasp what was really enabled/disabled. Take the opportunity of the GEN -> XE_HP name break and also break with the feature inheritance. For XE_HP this basically goes from GEN12 back to GEN7 coalescing the features making sure the overrides remain, remove all the display-specific features and sort it. Then also remove the definitions that would be overridden by DGFX_FEATURES and those that were 0 (since that is the default). Exception here is has_master_unit_irq: although it is a feature that started with DG1 and is true for all DGFX platforms, it's also true for XE_HP in general. Signed-off-by:
-
Lucas De Marchi authored
Besides the arch version returned by GRAPHICS_VER(), new platforms contain a "release id" to make clear the difference from one platform to another. The release id number is not formally defined by hardware until future platforms that will expose it via a new GMD_ID register. For the platforms we support before that register becomes available we will set the values in software and we can set them as we please. So the plan is to set them so we can group different features under a single GRAPHICS_VER_FULL() check. After GMD_ID is used, the usefulness of a "full version check" will be greatly reduced and will be mostly used for deciding workarounds and a few code paths. So it makes sense to keep it as a separate field from graphics_ver. Also, as a platform with `release == n` may be closer feature-wise to `n - 2` than to `n - 1`, use the word "release" rather than the more common "minor" for this This is a mix of 2 independent changes: one by me and the other by Matt Roper. v2: - Reword commit message to make it clearer why we don't call it "minor" (Matt Roper and Tvrtko) - Rename variables s/*_ver_release/*_rel/ and print them in a single line formatted as {ver}.{rel:2} (Jani and Matt Roper) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: -
Lucas De Marchi authored
Brevity is not needed here, so just spell out "* version" in the string. Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Jason Ekstrand authored
There's no reason that I can tell why this should be per-i915_buddy_mm and doing so causes KMEM_CACHE to throw dmesg warnings because it tries to create a debugfs entry with the name i915_buddy_block multiple times. We could handle this by carefully giving each slab its own name but that brings its own pain because then we have to store that string somewhere and manage the lifetimes of the different slabs. The most likely outcome would be a global atomic which we increment to get a new name or something like that. The much easier solution is to use the i915_globals system like we do for every other slab in i915. This ensures that we have exactly one of them for each i915 driver load and it gets neatly created on module load and destroyed on module unload. Using the globals system also means that its now tied into the shrink handler so we can properly respond to low-memory situations. Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Fixes: 88be9a0a ("drm/i915/ttm: add ttm_buddy_man") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-7-jason@jlekstrand.net
-
Jason Ekstrand authored
If the driver was not fully loaded, we may still have globals lying around. If we don't tear those down in i915_exit(), we'll leak a bunch of memory slabs. This can happen two ways: use_kms = false and if we've run mock selftests. In either case, we have an early exit from i915_init which happens after i915_globals_init() and we need to clean up those globals. The mock selftests case is especially sticky. The load isn't entirely a no-op. We actually do quite a bit inside those selftests including allocating a bunch of mock objects and running tests on them. Once all those tests are complete, we exit early from i915_init(). Perviously, i915_init() would return a non-zero error code on failure and a zero error code on success. In the success case, we would get to i915_exit() and check i915_pci_driver.driver.owner to detect if i915_init exited early and do nothing. In the failure case, we would fail i915_init() but there would be no opportunity to clean up globals. The most annoying part is that you don't actually notice the failure as part of the self-tests since leaking a bit of memory, while bad, doesn't result in anything observable from userspace. Instead, the next time we load the driver (usually for next IGT test), i915_globals_init() gets invoked again, we go to allocate a bunch of new memory slabs, those implicitly create debugfs entries, and debugfs warns that we're trying to create directories and files that already exist. Since this all happens as part of the next driver load, it shows up in the dmesg-warn of whatever IGT test ran after the mock selftests. While the obvious thing to do here might be to call i915_globals_exit() after selftests, that's not actually safe. The dma-buf selftests call i915_gem_prime_export which creates a file. We call dma_buf_put() on the resulting dmabuf which calls fput() on the file. However, fput() isn't immediate and gets flushed right before syscall returns. This means that all the fput()s from the selftests don't happen until right before the module load syscall used to fire off the selftests returns which is after i915_init(). If we call i915_globals_exit() in i915_init() after selftests, we end up freeing slabs out from under objects which won't get released until fput() is flushed at the end of the module load syscall. The solution here is to let i915_init() return success early and detect the early success in i915_exit() and only tear down globals and nothing else. This way the module loads successfully, regardless of the success or failure of the tests. Because we've not enumerated any PCI devices, no device nodes are created and it's entirely useless from userspace. The only thing the module does at that point is hold on to a bit of memory until we unload it and i915_exit() is called. Importantly, this means that everything from our selftests has the ability to properly flush out between i915_init() and i915_exit() because there is at least one syscall boundary in between. In order to handle all the delicate init/exit cases, we convert the whole thing to a table of init/exit pairs and track the init status in the new init_progress global. This allows us to ensure that i915_exit() always tears down exactly the things that i915_init() successfully initialized. We also allow early-exit of i915_init() without failure by an init function returning > 0. This is useful for nomodeset, and selftests. For the mock selftests, we convert them to always return 1 so we get the desired behavior of the driver always succeeding to load the driver and then properly tearing down the partially loaded driver. v2 (Tvrtko Ursulin): - Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs)) v2 (Daniel Vetter): - Update the docstring for i915.mock_selftests Signed-off-by:
-
Jason Ekstrand authored
In the unlikely event that pci_register_device() fails, we were tearing down our PMU setup but not globals. This leaves a bunch of memory slabs lying around. Signed-off-by:
-
Jason Ekstrand authored
We should tear down in the opposite order we set up. Signed-off-by:
-
Daniel Vetter authored
This essentially reverts commit 84a10749 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jan 24 11:36:08 2018 +0000 drm/i915: Shrink the GEM kmem_caches upon idling mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it then we need to fix that there, not hand-roll our own slab shrinking code in i915. Also when this was added there was only one other caller of kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one outside of i915 code in a kunit test, which seems legit since that wants to very carefully control what's in the kmem_cache. This out of a total of over 500 calls to kmem_cache_create. This alone should have been warning sign enough that we're doing something silly. Noticed while reviewing a patch set from Jason to fix up some issues in our i915_init() and i915_exit() module load/cleanup code. Now that i915_globals.c isn't any different than normal init/exit functions, we should convert them over to one unified table and remove i915_globals.[hc] entirely. v2: Improve commit message (Jason) Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch
-
- 21 Jul, 2021 2 commits
-
-
Matt Roper authored
Workarounds are documented in the bspec with an exclusive upper bound (i.e., a "fixed" stepping that no longer needs the workaround). This makes our driver's use of an inclusive upper bound for stepping ranges confusing; the differing notation between code and bspec makes it very easy for mistakes to creep in. Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use an exclusive upper bound like the bspec does. This also has the benefit of helping make sure workarounds are properly handled for new minor steppings that show up (e.g., an A1 between the A0 and B0 we already knew about) --- if the new intermediate stepping pulls in hardware fixes early, there will be an update to the workaround definition which lets us know we need to change our code. If the new stepping does not pull a hardware fix earlier, then the new stepping will already be captured properly by the "[begin, fix)" range in the code. We'll probably need to be extra vigilant in code review of new workarounds for the near future to make sure developers notice the new semantics of workaround bounds. But we just migrated a bunch of our platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people are already adjusting to the new macros and now is a good time to make this change too. [mattrope: Split out GT changes to apply through gt-next tree] Signed-off-by: -
Matt Roper authored
DFR programming (which we enable as an optimization on gen11, but must ensure is disabled on gen12) should be handled as a GT workaround rather than clock gating initialization. This will ensure that the programming of these registers is verified with our typical workaround checks. Signed-off-by:
-
