- 08 Nov, 2016 25 commits
-
-
Dave Gerlach authored
commit ad8529fd upstream. Currently omap-rng checks the return value of pm_runtime_get_sync and reports failure if anything is returned, however it should be checking if ret < 0 as pm_runtime_get_sync return 0 on success but also can return 1 if the device was already active which is not a failure case. Only values < 0 are actual failures. Fixes: 61dc0a44 ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed") Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Ondrej Mosnáček authored
commit 50d2e6dc upstream. The cipher block size for GCM is 16 bytes, and thus the CTR transform used in crypto_gcm_setkey() will also expect a 16-byte IV. However, the code currently reserves only 8 bytes for the IV, causing an out-of-bounds access in the CTR transform. This patch fixes the issue by setting the size of the IV buffer to 16 bytes. Fixes: 84c91152 ("[CRYPTO] gcm: Add support for async ciphers") Signed-off-by:
Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by:
-
Jan Viktorin authored
commit 4d31a258 upstream. The variable i contains a total number of resources (including IORESOURCE_IRQ). However, we want the dmem_region_start to point after the last resource of type IORESOURCE_MEM. The original behaviour leads (very likely) to skipping several UIO mapping regions and makes them useless. Fix this by computing dmem_region_start from the uiomem which points to the last used UIO mapping. Fixes: 0a0c3b5a ("Add new uio device for dynamic memory allocation") Signed-off-by:
Jan Viktorin <viktorin@rehivetech.com> Signed-off-by:
-
Sebastian Frias authored
commit ee26c013 upstream. Without this patch irq_domain_disassociate() cannot properly release the interrupt. In fact, irq_map_generic_chip() checks a bit on 'gc->installed' but said bit is never cleared, only set. Commit 088f40b7 ("genirq: Generic chip: Add linear irq domain support") added irq_map_generic_chip() function and also stated "This lacks a removal function for now". This commit provides an implementation of an unmap function that can be called by irq_domain_disassociate(). [ tglx: Made the function static and removed the export as we have neither a prototype nor a modular user. ] [js] use irq_get_irq_data, irq_set_chip_and_handler, and irq_set_chip_data in 3.12 Fixes: 088f40b7 ("genirq: Generic chip: Add linear irq domain support") Signed-off-by:
Sebastian Frias <sf84@laposte.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mason <slash.tmp@free.fr> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/579F5C5A.2070507@laposte.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Russell Currey authored
commit 04fec21c upstream. eeh_pe_bus_get() can return NULL if a PCI bus isn't found for a given PE. Some callers don't check this, and can cause a null pointer dereference under certain circumstances. Fix this by checking NULL everywhere eeh_pe_bus_get() is called. Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event") Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jesse Gross authored
commit a09a4c8d upstream. If a packet is either locally encapsulated or processed through GRO it is marked with the offloads that it requires. However, when it is decapsulated these tunnel offload indications are not removed. This means that if we receive an encapsulated TCP packet, aggregate it with GRO, decapsulate, and retransmit the resulting frame on a NIC that does not support encapsulation, we won't be able to take advantage of hardware offloads even though it is just a simple TCP packet at this point. This fixes the problem by stripping off encapsulation offload indications when packets are decapsulated. The performance impacts of this bug are significant. In a test where a Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated, and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a result of avoiding unnecessary segmentation at the VM tap interface. [js] no fou in 3.12 yet Reported-by:
Ramu Ramamurthy <sramamur@linux.vnet.ibm.com> Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE") Signed-off-by:
Jesse Gross <jesse@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> (backported from commit a09a4c8d) [adapt iptunnel_pull_header arguments, avoid 7f290c94] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by:
-
Pravin B Shelar authored
part of commit f6eec614 upstream. Add NETIF_F_GSO_ENCAP_ALL mask covering all encapsulation GSO flags. [mk] only introduce the helper, do not pick the openvswitch change the original commit was about. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Andy Zhou <azhou@nicira.com> Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Gerald Schaefer authored
commit 2247bb33 upstream. Patch series "mm/hugetlb: memory offline issues with hugepages", v4. This addresses several issues with hugepages and memory offline. While the first patch fixes a panic, and is therefore rather important, the last patch is just a performance optimization. The second patch fixes a theoretical issue with reserved hugepages, while still leaving some ugly usability issue, see description. This patch (of 3): dissolve_free_huge_pages() will either run into the VM_BUG_ON() or a list corruption and addressing exception when trying to set a memory block offline that is part (but not the first part) of a "gigantic" hugetlb page with a size > memory block size. When no other smaller hugetlb page sizes are present, the VM_BUG_ON() will trigger directly. In the other case we will run into an addressing exception later, because dissolve_free_huge_page() will not work on the head page of the compound hugetlb page which will result in a NULL hstate from page_hstate(). To fix this, first remove the VM_BUG_ON() because it is wrong, and then use the compound head page in dissolve_free_huge_page(). This means that an unused pre-allocated gigantic page that has any part of itself inside the memory block that is going offline will be dissolved completely. Losing an unused gigantic hugepage is preferable to failing the memory offline, for example in the situation where a (possibly faulty) memory DIMM needs to go offline. Changes for v4.4 stable: - make it apply w/o commit c1470b33 "mm/hugetlb: fix incorrect hugepages count during mem hotplug" Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Link: http://lkml.kernel.org/r/20160926172811.94033-2-gerald.schaefer@de.ibm.comSigned-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rui Teng <rui.teng@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Deucher authored
commit 02cfb5fc upstream. Ported from Rex's amdgpu change. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 42792029 upstream. Used the wrong index to setup the phase shedding mask. Signed-off-by:
-
Alex Deucher authored
commit 884031f0 upstream. Only needed on CIK+ due to the way pci reset is handled by the GPU. Signed-off-by:
-
Richard Weinberger authored
commit 843741c5 upstream. When the operation fails we also have to undo the changes we made to ->xattr_names. Otherwise listxattr() will report wrong lengths. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Jiri Slaby authored
commit 3f2d2664 upstream. Commit f68381a7 (mmc: block: fix packed command header endianness) correctly fixed endianness handling of packed_cmd_hdr in mmc_blk_packed_hdr_wrq_prep. But now, sparse complains about incorrect types: drivers/mmc/card/block.c:1613:27: sparse: incorrect type in assignment (different base types) drivers/mmc/card/block.c:1613:27: expected unsigned int [unsigned] [usertype] <noident> drivers/mmc/card/block.c:1613:27: got restricted __le32 [usertype] <noident> ... So annotate cmd_hdr properly using __le32 to make everyone happy. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jan Kara authored
commit a2ed0b39 upstream. When isofs_mount() is called to mount a device read-write, it returns EACCES even before it checks that the device actually contains an isofs filesystem. This may confuse mount(8) which then tries to mount all subsequent filesystem types in read-only mode. Fix the problem by returning EACCES only once we verify that the device indeed contains an iso9660 filesystem. Fixes: 17b7f7cfReported-by:
Kent Overstreet <kent.overstreet@gmail.com> Reported-by:
Karel Zak <kzak@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jack Morgenstein authored
commit 6e522422 upstream. The VF administrative mac addresses (stored in the PF driver) are initialized to zero when the PF driver starts up. These addresses may be modified in the PF driver through ndo calls initiated by iproute2 or libvirt. While we allow the PF/host to change the VF admin mac address from zero to a valid unicast mac, we do not allow restoring the VF admin mac to zero. We currently only allow changing this mac to a different unicast mac. This leads to problems when libvirt scripts are used to deal with VF mac addresses, and libvirt attempts to revoke the mac so this host will not use it anymore. Fix this by allowing resetting a VF administrative MAC back to zero. Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support') Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by:
Moshe Levi <moshele@mellanox.com> Signed-off-by:
-
Steve French authored
commit 18dd8e1a upstream. [CIFS] We had cases where we sent a SMB2/SMB3 setinfo request with all timestamp (and DOS attribute) fields marked as 0 (ie do not change) e.g. on chmod or chown. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit fa70b87c upstream. GUIDs although random, and 16 bytes, need to be generated as proper uuids. [js] no create_durable_v2_buf in 3.12 yet Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Reported-by:
David Goebels <davidgoe@microsoft.com> Signed-off-by:
-
Steve French authored
commit c2afb814 upstream. Signed-off-by:
-
Steve French authored
commit 9742805d upstream. In debugging smb3, it is useful to display the number of credits available, so we can see when the server has not granted sufficient operations for the client to make progress, or alternatively the client has requested too many credits (as we saw in a recent bug) so we can compare with the number of credits the server thinks we have. Add a /proc/fs/cifs/DebugData line to display the client view on how many credits are available. Signed-off-by:
Germano Percossi <germano.percossi@citrix.com> Signed-off-by:
-
Steve French authored
commit 3afca265 upstream. Remove the global file_list_lock to simplify cifs/smb3 locking and have spinlocks that more closely match the information they are protecting. Add new tcon->open_file_lock and file->file_info_lock spinlocks. Locks continue to follow a heirachy, cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file where global tcp_ses_lock still protects socket and cifs_ses, while the the newer locks protect the lower level structure's information (tcon and cifs_file respectively). Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
-
Ross Lagerwall authored
commit 7d414f39 upstream. The kernel client requests 2 credits for many operations even though they only use 1 credit (presumably to build up a buffer of credit). Some servers seem to give the client as much credit as is requested. In this case, the amount of credit the client has continues increasing to the point where (server->credits * MAX_BUFFER_SIZE) overflows in smb2_wait_mtu_credits(). Fix this by throttling the credit requests if an set limit is reached. For async requests where the credit charge may be > 1, request as much credit as what is charged. The limit is chosen somewhat arbitrarily. The Windows client defaults to 128 credits, the Windows server allows clients up to 512 credits (or 8192 for Windows 2016), and the NetApp server (and at least one other) does not limit clients at all. Choose a high enough value such that the client shouldn't limit performance. This behavior was seen with a NetApp filer (NetApp Release 9.0RC2). [js] no smb2_async_readv and smb2_async_writev yet Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Oleg Nesterov authored
commit 89f39af1 upstream. Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering. In this case thaw_super() will wrongly call s_op->unfreeze_fs() before it was actually frozen, and call sb_freeze_unlock() which leads to the unbalanced percpu_up_write(). Unfortunately lockdep can't detect this, so this triggers misc BUG_ON()'s in kernel/rcu/sync.c. Reported-and-tested-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 7798bf21 upstream. On faulting sigreturn we do get SIGSEGV, all right, but anything we'd put into pt_regs could end up in the coredump. And since __copy_from_user() never zeroed on arc, we'd better bugger off on its failure without copying random uninitialized bits of kernel stack into pt_regs... Signed-off-by:
-
Manfred Spraul authored
commit 5864a2fd upstream. Commit 6d07b68c ("ipc/sem.c: optimize sem_lock()") introduced a race: sem_lock has a fast path that allows parallel simple operations. There are two reasons why a simple operation cannot run in parallel: - a non-simple operations is ongoing (sma->sem_perm.lock held) - a complex operation is sleeping (sma->complex_count != 0) As both facts are stored independently, a thread can bypass the current checks by sleeping in the right positions. See below for more details (or kernel bugzilla 105651). The patch fixes that by creating one variable (complex_mode) that tracks both reasons why parallel operations are not possible. The patch also updates stale documentation regarding the locking. With regards to stable kernels: The patch is required for all kernels that include the commit 6d07b68c ("ipc/sem.c: optimize sem_lock()") (3.10?) The alternative is to revert the patch that introduced the race. The patch is safe for backporting, i.e. it makes no assumptions about memory barriers in spin_unlock_wait(). Background: Here is the race of the current implementation: Thread A: (simple op) - does the first "sma->complex_count == 0" test Thread B: (complex op) - does sem_lock(): This includes an array scan. But the scan can't find Thread A, because Thread A does not own sem->lock yet. - the thread does the operation, increases complex_count, drops sem_lock, sleeps Thread A: - spin_lock(&sem->lock), spin_is_locked(sma->sem_perm.lock) - sleeps before the complex_count test Thread C: (complex op) - does sem_lock (no array scan, complex_count==1) - wakes up Thread B. - decrements complex_count Thread A: - does the complex_count test Bug: Now both thread A and thread C operate on the same array, without any synchronization. [js] use set_mb instead of smp_store_mb Fixes: 6d07b68c ("ipc/sem.c: optimize sem_lock()") Link: http://lkml.kernel.org/r/1469123695-5661-1-git-send-email-manfred@colorfullife.com Reported-by: <felixh@informatik.uni-bremen.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: <1vier1@web.de> Signed-off-by:
-
Michael S. Tsirkin authored
commit 577f183a upstream. On x86/um CONFIG_SMP is never defined. As a result, several macros match the asm-generic variant exactly. Drop the local definitions and pull in asm-generic/barrier.h instead. This is in preparation to refactoring this code area. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
- 28 Oct, 2016 15 commits
-
-
Paul E. McKenney authored
commit 536fa402 upstream. CPUs without single-byte and double-byte loads and stores place some "interesting" requirements on concurrent code. For example (adapted from Peter Hurley's test code), suppose we have the following structure: struct foo { spinlock_t lock1; spinlock_t lock2; char a; /* Protected by lock1. */ char b; /* Protected by lock2. */ }; struct foo *foop; Of course, it is common (and good) practice to place data protected by different locks in separate cache lines. However, if the locks are rarely acquired (for example, only in rare error cases), and there are a great many instances of the data structure, then memory footprint can trump false-sharing concerns, so that it can be better to place them in the same cache cache line as above. But if the CPU does not support single-byte loads and stores, a store to foop->a will do a non-atomic read-modify-write operation on foop->b, which will come as a nasty surprise to someone holding foop->lock2. So we now require CPUs to support single-byte and double-byte loads and stores. Therefore, this commit adjusts the definition of __native_word() to allow these sizes to be used by smp_load_acquire() and smp_store_release(). Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Guenter Roeck authored
commit 35d04077 upstream. The definition of atomic_dec_if_positive() assumes that atomic_sub_if_positive() exists, which is only the case if metag specific atomics are used. This results in the following build error when trying to build metag1_defconfig. kernel/ucount.c: In function 'dec_ucount': kernel/ucount.c:211: error: implicit declaration of function 'atomic_sub_if_positive' Moving the definition of atomic_dec_if_positive() into the metag conditional code fixes the problem. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Ming Lei authored
commit bcd8f2e9 upstream. This patch fixes one use-after-free report[1] by KASAN. In __scsi_scan_target(), when a type 31 device is probed, SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned again. Inside the following scsi_report_lun_scan(), one new scsi_device instance is allocated, and scsi_probe_and_add_lun() is called again to probe the target and still see type 31 device, finally __scsi_remove_device() is called to remove & free the device at the end of scsi_probe_and_add_lun(), so cause use-after-free in scsi_report_lun_scan(). And the following SCSI log can be observed: scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0) scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0 scsi 0:0:2:0: scsi scan: REPORT LUN scan scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104 This patch fixes the issue by moving the putting reference at the end of scsi_report_lun_scan(). [1] KASAN report ================================================================== [ 3.274597] PM: Adding info for serio:serio1 [ 3.275127] BUG: KASAN: use-after-free in __scsi_scan_target+0xd87/0xdf0 at addr ffff880254d8c304 [ 3.275653] Read of size 4 by task kworker/u10:0/27 [ 3.275903] CPU: 3 PID: 27 Comm: kworker/u10:0 Not tainted 4.8.0 #2121 [ 3.276258] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3.276797] Workqueue: events_unbound async_run_entry_fn [ 3.277083] ffff880254d8c380 ffff880259a37870 ffffffff94bbc6c1 ffff880078402d80 [ 3.277532] ffff880254d8bb80 ffff880259a37898 ffffffff9459fec1 ffff880259a37930 [ 3.277989] ffff880254d8bb80 ffff880078402d80 ffff880259a37920 ffffffff945a0165 [ 3.278436] Call Trace: [ 3.278528] [<ffffffff94bbc6c1>] dump_stack+0x65/0x84 [ 3.278797] [<ffffffff9459fec1>] kasan_object_err+0x21/0x70 [ 3.279063] device: 'psaux': device_add [ 3.279616] [<ffffffff945a0165>] kasan_report_error+0x205/0x500 [ 3.279651] PM: Adding info for No Bus:psaux [ 3.280202] [<ffffffff944ecd22>] ? kfree_const+0x22/0x30 [ 3.280486] [<ffffffff94bc2dc9>] ? kobject_release+0x119/0x370 [ 3.280805] [<ffffffff945a0543>] __asan_report_load4_noabort+0x43/0x50 [ 3.281170] [<ffffffff9507e1f7>] ? __scsi_scan_target+0xd87/0xdf0 [ 3.281506] [<ffffffff9507e1f7>] __scsi_scan_target+0xd87/0xdf0 [ 3.281848] [<ffffffff9507d470>] ? scsi_add_device+0x30/0x30 [ 3.282156] [<ffffffff94f7f660>] ? pm_runtime_autosuspend_expiration+0x60/0x60 [ 3.282570] [<ffffffff956ddb07>] ? _raw_spin_lock+0x17/0x40 [ 3.282880] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.283200] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.283563] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.283882] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.284173] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.284492] [<ffffffff941a8954>] ? pwq_dec_nr_in_flight+0x124/0x2a0 [ 3.284876] [<ffffffff941d1770>] ? preempt_count_add+0x130/0x160 [ 3.285207] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.285526] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.285844] [<ffffffff941aa810>] ? process_one_work+0x12d0/0x12d0 [ 3.286182] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.286443] [<ffffffff940855cd>] ? __switch_to+0x88d/0x1430 [ 3.286745] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287085] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.287368] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287697] Object at ffff880254d8bb80, in cache kmalloc-2048 size: 2048 [ 3.288064] Allocated: [ 3.288147] PID = 27 [ 3.288218] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.288531] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.288806] [<ffffffff9459f4bd>] kasan_kmalloc+0xad/0xe0 [ 3.289098] [<ffffffff9459c07e>] __kmalloc+0x13e/0x250 [ 3.289378] [<ffffffff95078e5a>] scsi_alloc_sdev+0xea/0xcf0 [ 3.289701] [<ffffffff9507de76>] __scsi_scan_target+0xa06/0xdf0 [ 3.290034] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.290362] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.290724] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.291055] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.291354] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.291695] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.292022] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.292325] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.292594] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.292886] Freed: [ 3.292945] PID = 27 [ 3.293016] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.293327] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.293600] [<ffffffff9459fa61>] kasan_slab_free+0x71/0xb0 [ 3.293916] [<ffffffff9459bac2>] kfree+0xa2/0x1f0 [ 3.294168] [<ffffffff9508158a>] scsi_device_dev_release_usercontext+0x50a/0x730 [ 3.294598] [<ffffffff941ace9a>] execute_in_process_context+0xda/0x130 [ 3.294974] [<ffffffff9508107c>] scsi_device_dev_release+0x1c/0x20 [ 3.295322] [<ffffffff94f566f6>] device_release+0x76/0x1e0 [ 3.295626] [<ffffffff94bc2db7>] kobject_release+0x107/0x370 [ 3.295942] [<ffffffff94bc29ce>] kobject_put+0x4e/0xa0 [ 3.296222] [<ffffffff94f56e17>] put_device+0x17/0x20 [ 3.296497] [<ffffffff9505201c>] scsi_device_put+0x7c/0xa0 [ 3.296801] [<ffffffff9507e1bc>] __scsi_scan_target+0xd4c/0xdf0 [ 3.297132] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.297458] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.297829] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.298156] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.298453] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.298777] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.299105] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.299408] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.299676] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.299967] Memory state around the buggy address: [ 3.300209] ffff880254d8c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300608] ffff880254d8c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300986] >ffff880254d8c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.301408] ^ [ 3.301550] ffff880254d8c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3.301987] ffff880254d8c400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.302396] ================================================================== Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Trond Myklebust authored
commit 304020fe upstream. If the file permissions change on the server, then we may not be able to recover open state. If so, we need to ensure that we mark the file descriptor appropriately. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Tested-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 62837b3c upstream. Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Also let's reorder elantech_dmi_force_crc_enabled list so LIfebook enries are in alphabetical order. Reported-by:
William Linna <william.linna@gmail.com> Tested-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Matti Kurkela authored
commit f9a703a5 upstream. Just like Fujitsu CELSIUS H730, the H760 also has an Elantech touchpad with the same quirks. Without this patch, the touchpad is useless out-of-the-box as the mouse pointer won't move. This patch makes the driver aware of both the crc_enabled=1 requirement and the middle button, making the touchpad fully functional out-of-the-box. Signed-off-by:
Matti Kurkela <Matti.Kurkela@iki.fi> Signed-off-by:
-
Marcin Nowakowski authored
commit 74f1077b upstream. Currently regs_return_value always negates reg[2] if it determines the syscall has failed, but when called in kernel context this check is invalid and may result in returning a wrong value. This fixes errors reported by CONFIG_KPROBES_SANITY_TEST Fixes: d7e7528b ("Audit: push audit success and retcode into arch ptrace.h") Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14381/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 24b923f0 upstream. This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1. The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 1871d718 upstream. The cx231xx_set_agc_analog_digital_mux_select() callers expect it to return 0 or an error. Returning a positive value makes the first attempt to switch between analog/digital to fail. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 505a0ea7 upstream. With the current settings, only one channel locks properly. That's likely because, when this driver was written, Brazil were still using experimental transmissions. Change it to reproduce the settings used by the newer drivers. That makes it lock on other channels. Tested with both PixelView SBTVD Hybrid (cx231xx-based) and C3Tech Digital Duo HDTV/SDTV (em28xx-based) devices. Signed-off-by:
-
Mauro Carvalho Chehab authored
commit dafb65fb upstream. On this frontend, it takes a while to start output normal TS data. That only happens on state S9. On S8, the TS output is enabled, but it is not reliable enough. However, the zigzag loop is too fast to let it sync. As, on practical tests, the zigzag software loop doesn't seem to be helping, but just slowing down the tuning, let's switch to hardware algorithm, as the tuners used on such devices are capable of work with frequency drifts without any help from software. Signed-off-by:
-
Max Staudt authored
commit d50b3f43 upstream. When using efifb with a 16-bit (5:6:5) visual, fbcon's text is rendered in the wrong colors - e.g. text gray (#aaaaaa) is rendered as green (#50bc50) and neighboring pixels have slightly different values (such as #50bc78). The reason is that fbcon loads its 16 color palette through efifb_setcolreg(), which in turn calculates a 32-bit value to write into memory for each palette index. Until now, this code could only handle 8-bit visuals and didn't mask overlapping values when ORing them. With this patch, fbcon displays the correct colors when a qemu VM is booted in 16-bit mode (in GRUB: "set gfxpayload=800x600x16"). Fixes: 7c83172b ("x86_64 EFI boot support: EFI frame buffer driver") # v2.6.24+ Signed-off-by:
Max Staudt <mstaudt@suse.de> Acked-By:
Peter Jones <pjones@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Dan Carpenter authored
commit e7cb08e8 upstream. We accidentally overwrite the original saved value of "flags" so that we can't re-enable IRQs at the end of the function. Presumably this function is mostly called with IRQs disabled or it would be obvious in testing. Fixes: aceeffbb ("zfcp: trace full payload of all SAN records (req,resp,iels)") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
-
Steffen Maier authored
commit aceeffbb upstream. This was lost with commit 2c55b750 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") but is necessary for problem determination, e.g. to see the currently active zone set during automatic port scan. For the large GPN_FT response (4 pages), save space by not dumping any empty residual entries. Signed-off-by:
Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Steffen Maier authored
commit 94db3725 upstream. commit 2c55b750 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") started to add FC_CT_HDR_LEN which made zfcp dump random data out of bounds for RSPN GS responses because u.rspn.rsp is the largest and last field in the union of struct zfcp_fc_req. Other request/response types only happened to stay within bounds due to the padding of the union or due to the trace capping of u.gspn.rsp to ZFCP_DBF_SAN_MAX_PAYLOAD. Timestamp : ... Area : SAN Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : ... Record id : 2 Tag : fsscth2 Request id : 0x... Destination ID : 0x00fffffc Payload short : 01000000 fc020000 80020000 00000000 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx <=== 00000000 00000000 00000000 00000000 Payload length : 32 <=== struct zfcp_fc_req { [0] struct zfcp_fsf_ct_els ct_els; [56] struct scatterlist sg_req; [96] struct scatterlist sg_rsp; union { struct {req; rsp;} adisc; SIZE: 28+28= 56 struct {req; rsp;} gid_pn; SIZE: 24+20= 44 struct {rspsg; req;} gpn_ft; SIZE: 40*4+20=180 struct {req; rsp;} gspn; SIZE: 20+273= 293 struct {req; rsp;} rspn; SIZE: 277+16= 293 [136] } u; } SIZE: 432 Signed-off-by:
-
