- 26 Jul, 2021 1 commit
-
-
Lucas De Marchi authored
This is only used by GRAPHICS_VER == 6 and GRAPHICS_VER == 7. All other recent platforms do not depend on this field, so it doesn't make much sense to keep it generic like that. Instead, just do a mapping from engine class to HW ID in the single place that is needed. v2: use macros with the direct register address instead of calculating from the legacy HW_ID (Matt Roper) Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723002551.3906535-1-lucas.demarchi@intel.com
-
- 24 Jul, 2021 4 commits
-
-
Matt Roper authored
Implement Xe_HP forcewake handling. While we're at it, let's reorder to the forcewake assignment if/else ladder to match our usual driver conventions. Co-authored-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-6-matthew.d.roper@intel.com
-
John Harrison authored
Xe_HP can have a lot of extra media engines. This patch adds the reset support for them. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
John Harrison authored
Xe_HP can have a lot of extra media engines. This patch adds the interrupt handler support for them. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-4-matthew.d.roper@intel.com
-
John Harrison authored
Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them. v2: - Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t. (Tvrtko) v3: - Drop the .hw_id assignments. (Lucas) v4: - Fix graphics_ver typo for VCS4 (should be 12, not 11). (Lucas) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
- 23 Jul, 2021 6 commits
-
-
Matt Roper authored
Since we can't steer multicast register reads during ring-based workaround verification, we need to define the multicast ranges where failure to steer could potentially cause us to read back from a fused-off register instance. As with gen12, we can ignore the multicast ranges that the bspec describes as 'SQIDI' since all instances of those registers will always be present and we'll always be able to read back a workaround value that was written with multicast. Bspec: 66534 Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Workaround also needed for alderlake-P. HSDES: 14010801662 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matthew Auld authored
The CPU domain should be static for discrete, and on DG1 we don't need any flushing since everything is already coherent, so really all this does is an object wait, for which we have an ioctl. Longer term the desired caching should be an immutable creation time property for the BO, which can be set with something like gem_create_ext. One other user is iris + userptr, which uses the set_domain to probe all the pages to check if the GUP succeeds, however we now have a PROBE flag for this purpose. v2: add some more kernel doc, also add the implicit rules with caching Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Acked-by:
Kenneth Graunke <kenneth@whitecape.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com
-
Tvrtko Ursulin authored
On Xe_HP the fusing register is renamed and changed to have the "enable" semantics, but otherwise remains compatible (mmio address, bitmask ranges) with older platforms. To simplify things we do not add a new register definition but just stop inverting the fusing masks before processing them. Bspec: 52615 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Lucas De Marchi authored
We kept adding new engines and for that increasing hw_id unnecessarily: it's not used since GRAPHICS_VER == 8. Prepend "gen6" to the field and try to pack it in the structs to give a hint this field is actually not used in recent platforms. Signed-off-by:
-
Lucas De Marchi authored
The engine hw_id is only used by RING_FAULT_REG(), which is not used by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set the engine's guc_id, but that is not the case anymore since commit c784e524 ("drm/i915/guc: Update to use firmware v49.0.1"): now we only use class and id information to generate guc_id. We tend to keep adding new defines just to be consistent, but let's try to remove them and let them defined to 0 for engines that only exist on gen8+ platforms. v2: Reword commit message and add information about when we stopped using hw_id (Matt Roper) Signed-off-by:
-
- 22 Jul, 2021 29 commits
-
-
Lucas De Marchi authored
gen8_clear_engine_error_register() is actually not used by GRAPHICS_VER >= 8, since for those we are using another register that is not engine-dependent. Fix the platform prefix, to make clear we are not using any GEN6_RING_FAULT_REG_* one GRAPHICS_VER >= 8. Signed-off-by:
-
Matthew Brost authored
Add intel_context tracing. These trace points are particular helpful when debugging the GuC firmware and can be enabled via CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS kernel config option. Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
Matthew Brost authored
Add trace point for GuC submit. Extended existing request trace points to include submit fence value,, guc_id, and ring tail value. v2: Fix white space alignment in i915_request_add trace point v3: Delete dep_from , dep_to (Tvrtko) Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Update GuC debugfs to support the new GuC structures. v2: (John Harrison) - Remove intel_lrc_reg.h include from i915_debugfs.c (Michal) - Rename GuC debugfs functions Signed-off-by:
-
Matthew Brost authored
When running the GuC the GPU can't be considered idle if the GuC still has contexts pinned. As such, a call has been added in intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for the number of unpinned contexts to go to zero. v2: rtimeout -> remaining_timeout v3: Drop unnecessary includes, guc_submission_busy_loop -> guc_submission_send_busy_loop, drop negatie timeout trick, move a refactor of guc_context_unpin to earlier path (John H) v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle function if not in GuC submission mode Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Ensure G2H response has space in the buffer before sending H2G CTB as the GuC can't handle any backpressure on the G2H interface. v2: (Matthew) - s/INTEL_GUC_SEND/INTEL_GUC_CT_SEND v3: (Matthew) - Add G2H credit accounting to blocking path, add g2h_release_space helper (John H) - CTB_G2H_BUFFER_SIZE / 4 == G2H_ROOM_BUFFER_SIZE Signed-off-by: -
Matthew Brost authored
Semaphores are an optimization and not required for basic GuC submission to work properly. Disable until we have time to do the implementation to enable semaphores and tune them for performance. Also long direction is just to delete semaphores from the i915 so another reason to not enable these for GuC submission. This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was not honored correctly. v2: Reword commit message v3: (John H) - Add text to commit indicating this also fixing an existing bug v4: (John H) - s/bug/bugs Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
If two requests are on the same ring, they are explicitly ordered by the HW. So, a submission fence is sufficient to ensure ordering when using the new GuC submission interface. Conversely, if two requests share a timeline and are on the same physical engine but different context this doesn't ensure ordering on the new GuC submission interface. So, a completion fence needs to be used to ensure ordering. v2: (Daniele) - Don't delete spin lock v3: (Daniele) - Delete forward dec Signed-off-by:
-
Matthew Brost authored
Disable preempt busywait when using GuC scheduling. This isn't needed as the GuC controls preemption when scheduling. v2: (John H): - Fix commit message Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Extend the deregistration context fence to fence whne a GuC context has scheduling disable pending. v2: (John H) - Update comment why we check the pin count within spin lock Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Disable engine barriers for unpinning with GuC. This feature isn't needed with the GuC as it disables context scheduling before unpinning which guarantees the HW will not reference the context. Hence it is not necessary to defer unpinning until a kernel context request completes on each engine in the context engine mask. Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
With GuC scheduling, it isn't safe to unpin a context while scheduling is enabled for that context as the GuC may touch some of the pinned state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is done, a call back is added to intel_context_unpin when pin count == 1 to disable scheduling for that context. When the response CTB is received it is safe to do the final unpin. Future patches may add a heuristic / delay to schedule the disable call back to avoid thrashing on schedule enable / disable. v2: (John H) - s/drm_dbg/drm_err (Daneiel) - Clean up sched state function Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Sometimes during context pinning a context with the same guc_id is registered with the GuC. In this a case deregister must be done before the context can be registered. A fence is inserted on all requests while the deregister is in flight. Once the G2H is received indicating the deregistration is complete the context is registered and the fence is released. v2: (John H) - Fix commit message Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Implement GuC context operations which includes GuC specific operations alloc, pin, unpin, and destroy. v2: (Daniel Vetter) - Use msleep_interruptible rather than cond_resched in busy loop (Michal) - Remove C++ style comment v3: (Matthew Brost) - Drop GUC_ID_START (John Harrison) - Fix a bunch of typos - Use drm_err rather than drm_dbg for G2H errors (Daniele) - Fix ;; typo - Clean up sched state functions - Add lockdep for guc_id functions - Don't call __release_guc_id when guc_id is invalid - Use MISSING_CASE - Add comment in guc_context_pin - Use shorter path to rpm (Daniele / CI) - Don't call release_guc_id on an invalid guc_id in destroy v4: (Daniel Vetter) - Add FIXME comment Signed-off-by:
-
Matthew Brost authored
Add bypass tasklet submission path to GuC. The tasklet is only used if H2G channel has backpresure. Signed-off-by:
-
Matthew Brost authored
Implement GuC submission tasklet for new interface. The new GuC interface uses H2G to submit contexts to the GuC. Since H2G use a single channel, a single tasklet is used for the submission path. Also the per engine interrupt handler has been updated to disable the rescheduling of the physical engine tasklet, when using GuC scheduling, as the physical engine tasklet is no longer used. In this patch the field, guc_id, has been added to intel_context and is not assigned. Patches later in the series will assign this value. v2: (John Harrison) - Clean up some comments v3: (John Harrison) - More comment cleanups Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Add LRC descriptor context lookup array which can resolve the intel_context from the LRC descriptor index. In addition to lookup, it can determine if the LRC descriptor context is currently registered with the GuC by checking if an entry for a descriptor index is present. Future patches in the series will make use of this array. v2: (Michal) - "linux/xarray.h" -> <linux/xarray.h> - s/lrc/LRC (John H) - Fix commit message Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Remove old GuC stage descriptor, add LRC descriptor which will be used by the new GuC interface implemented in this patch series. v2: (John Harrison) - s/lrc/LRC/g Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Matthew Brost authored
Add new GuC interface defines and structures while maintaining old ones in parallel. Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by:
-
Prathap Kumar Valsan authored
The layout of some engine contexts has changed on Xe_HP. Define the new offsets. Bspec: 45585, 46256 Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
-
Stuart Summers authored
Xe_HP changes the format of the context ID from past platforms. Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
-
John Harrison authored
Increasing the engine count causes a couple of local array variables to exceed the kernel stack limit. So make them dynamic allocations instead. Signed-off-by:
-
Venkata Sandeep Dhanalakota authored
In Gen12 there are various fuse combinations and in each configuration vdbox engine may be connected to SFC depending on which engines are available, so we need to set the SFC capability based on fuse value from the hardware. Even numbered physical instance always have SFC, odd numbered physical instances have SFC only if previous even instance is fused off. v2: - Minor style & typo fixes (Tvrtko) - Drop an unwanted 'inline' (Tvrtko) Bspec: 48028 Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by:
-
Matt Roper authored
As we begin applying XeHP and DG2 patches, the basic platform definitions and macros (like IS_DG2()) will be needed in both drm-intel-next and drm-intel-gt-next. Those initial definition patches are applied to a topic branch and merged to both trees. Signed-off-by: -
Matt Roper authored
DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics. There are two variants (treated as subplatforms in the code): DG2-G10 and DG2-G11 that require independent programming in some areas (e.g., workarounds). Bspec: 44472, 44474, 46197, 48028, 48077 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Lucas De Marchi authored
XeHP SDV is a Intel
® dGPU without display. This is just the definition of some basic platform macros, by large a copy of current state of Tigerlake which does not reflect the end state of this platform. v2: - Switch to intel_step infrastructure for stepping matches. (Jani) v3: - Bring earlier in patch series and leave addition of new media engines to the engine mask for a later patch. Bspec: 44467, 48077 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: -
Lucas De Marchi authored
Our _FEATURES macro went back to GEN7, extending each other, making it difficult to grasp what was really enabled/disabled. Take the opportunity of the GEN -> XE_HP name break and also break with the feature inheritance. For XE_HP this basically goes from GEN12 back to GEN7 coalescing the features making sure the overrides remain, remove all the display-specific features and sort it. Then also remove the definitions that would be overridden by DGFX_FEATURES and those that were 0 (since that is the default). Exception here is has_master_unit_irq: although it is a feature that started with DG1 and is true for all DGFX platforms, it's also true for XE_HP in general. Signed-off-by:
-
Lucas De Marchi authored
Besides the arch version returned by GRAPHICS_VER(), new platforms contain a "release id" to make clear the difference from one platform to another. The release id number is not formally defined by hardware until future platforms that will expose it via a new GMD_ID register. For the platforms we support before that register becomes available we will set the values in software and we can set them as we please. So the plan is to set them so we can group different features under a single GRAPHICS_VER_FULL() check. After GMD_ID is used, the usefulness of a "full version check" will be greatly reduced and will be mostly used for deciding workarounds and a few code paths. So it makes sense to keep it as a separate field from graphics_ver. Also, as a platform with `release == n` may be closer feature-wise to `n - 2` than to `n - 1`, use the word "release" rather than the more common "minor" for this This is a mix of 2 independent changes: one by me and the other by Matt Roper. v2: - Reword commit message to make it clearer why we don't call it "minor" (Matt Roper and Tvrtko) - Rename variables s/*_ver_release/*_rel/ and print them in a single line formatted as {ver}.{rel:2} (Jani and Matt Roper) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: -
Lucas De Marchi authored
Brevity is not needed here, so just spell out "* version" in the string. Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
