- 14 May, 2019 40 commits
-
-
Uladzislau Rezki (Sony) authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit afd07389 ] One of the vmalloc stress test case triggers the kernel BUG(): <snip> [60.562151] ------------[ cut here ]------------ [60.562154] kernel BUG at mm/vmalloc.c:512! [60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI [60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161 [60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390 <snip> it can happen due to big align request resulting in overflowing of calculated address, i.e. it becomes 0 after ALIGN()'s fixup. Fix it by checking if calculated address is within vstart/vend range. Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.comSigned-off-by:
Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 0c815854 ] After offlining a memory block, kmemleak scan will trigger a crash, as it encounters a page ext address that has already been freed during memory offlining. At the beginning in alloc_page_ext(), it calls kmemleak_alloc(), but it does not call kmemleak_free() in free_page_ext(). BUG: unable to handle kernel paging request at ffff888453d00000 PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:scan_block+0xb5/0x290 Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000 RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000 R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48 FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0 Call Trace: scan_gray_list+0x269/0x430 kmemleak_scan+0x5a8/0x10f0 kmemleak_write+0x541/0x6ca full_proxy_write+0xf8/0x190 __vfs_write+0xeb/0x980 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xaaa entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6c0dad73b8 Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8 RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001 RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840 R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780 R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs CR2: ffff888453d00000 ---[ end trace ccf646c7456717c5 ]--- Kernel panic - not syncing: Fatal exception Shutting down cpus with NMI Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Peng Fan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 0d3bd18a ] In case cma_init_reserved_mem failed, need to free the memblock allocated by memblock_reserve or memblock_alloc_range. Quote Catalin's comments: https://lkml.org/lkml/2019/2/26/482 Kmemleak is supposed to work with the memblock_{alloc,free} pair and it ignores the memblock_reserve() as a memblock_alloc() implementation detail. It is, however, tolerant to memblock_free() being called on a sub-range or just a different range from a previous memblock_alloc(). So the original patch looks fine to me. FWIW: Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.comSigned-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 43d28166 ] The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3 ("enic: assign affinity hint to interrupts") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christian Brauner authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 32a5ad9c ] Currently, when writing echo 18446744073709551616 > /proc/sys/fs/file-max /proc/sys/fs/file-max will overflow and be set to 0. That quickly crashes the system. This commit sets the max and min value for file-max. The max value is set to long int. Any higher value cannot currently be used as the percpu counters are long ints and not unsigned integers. Note that the file-max value is ultimately parsed via __do_proc_doulongvec_minmax(). This function does not report error when min or max are exceeded. Which means if a value largen that long int is written userspace will not receive an error instead the old value will be kept. There is an argument to be made that this should be changed and __do_proc_doulongvec_minmax() should return an error when a dedicated min or max value are exceeded. However this has the potential to break userspace so let's defer this to an RFC patch. Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.ioSigned-off-by:
Christian Brauner <christian@brauner.io> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Waiman Long <longman@redhat.com> [christian@brauner.io: v4] Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.ioSigned-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d01849f7 ] Tony notes that the GPIO module does not idle when level interrupts are in use, as the wakeup appears to get stuck. After extensive investigation, it appears that the wakeup will only be cleared if the interrupt status register is cleared while the interrupt is enabled. However, we are currently clearing it with the interrupt disabled for level-based interrupts. It is acknowledged that this observed behaviour conflicts with a statement in the TRM: CAUTION After servicing the interrupt, the status bit in the interrupt status register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be reset and the interrupt line released (by setting the corresponding bit of the interrupt status register to 1) before enabling an interrupt for the GPIO channel in the interrupt-enable register (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent the occurrence of unexpected interrupts when enabling an interrupt for the GPIO channel. However, this does not appear to be a practical problem. Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>, the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP: Fix the sequence to clear the IRQ status" saying: if the status is cleared after disabling the IRQ then sWAKEUP will not be cleared and gates the module transition When we unmask the level interrupt after the interrupt has been handled, enable the interrupt and only then clear the interrupt. If the interrupt is still pending, the hardware will re-assert the interrupt status. Should the caution note in the TRM prove to be a problem, we could use a clear-enable-clear sequence instead. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: updated comments based on an earlier TI patch] Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Douglas Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 31b265b3 ] As reported back in 2016-11 [1], the "ftdump" kdb command triggers a BUG for "sleeping function called from invalid context". kdb's "ftdump" command wants to call ring_buffer_read_prepare() in atomic context. A very simple solution for this is to add allocation flags to ring_buffer_read_prepare() so kdb can call it without triggering the allocation error. This patch does that. Note that in the original email thread about this, it was suggested that perhaps the solution for kdb was to either preallocate the buffer ahead of time or create our own iterator. I'm hoping that this alternative of adding allocation flags to ring_buffer_read_prepare() can be considered since it means I don't need to duplicate more of the core trace code into "trace_kdb.c" (for either creating my own iterator or re-preparing a ring allocator whose memory was already allocated). NOTE: another option for kdb is to actually figure out how to make it reuse the existing ftrace_dump() function and totally eliminate the duplication. This sounds very appealing and actually works (the "sr z" command can be seen to properly dump the ftrace buffer). The downside here is that ftrace_dump() fully consumes the trace buffer. Unless that is changed I'd rather not use it because it means "ftdump | grep xyz" won't be very useful to search the ftrace buffer since it will throw away the whole trace on the first grep. A future patch to dump only the last few lines of the buffer will also be hard to implement. [1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.orgReported-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit fc2b47b5 ] It believe it is a bad idea to hardcode a specific compiler prefix that may or may not be installed on a user's system. It is annoying when testing features that should not require compilers at all. For example, mrproper, headers_install, etc. should work without any compiler. They look like follows on my machine. $ make ARCH=h8300 mrproper ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found make: h8300-unknown-linux-gcc: Command not found [ a bunch of the same error messages continue ] $ make ARCH=h8300 headers_install ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found HOSTCC scripts/basic/fixdep make: h8300-unknown-linux-gcc: Command not found WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h [ snip ] The solution is to delete this line, or to use cc-cross-prefix like some architectures do. I chose the latter as a moderate fixup. I added an alternative 'h8300-linux-' because it is available at: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Aurelien Aptel authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit bc31d0cd ] We have a customer reporting crashes in lock_get_status() with many "Leaked POSIX lock" messages preceeding the crash. Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709 Leaked POSIX lock on dev=0x0:0x4b ino... Leaked locks on dev=0x0:0x4b ino=0xf911400000029: POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592 stack segment: 0000 [#1] SMP Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000 RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0 RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202 RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50 RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340 R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340 FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18 ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340 ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28 Call Trace: [<ffffffff8125e08f>] locks_show+0x2f/0x70 [<ffffffff81230ad1>] seq_read+0x251/0x3a0 [<ffffffff81275bbc>] proc_reg_read+0x3c/0x70 [<ffffffff8120e456>] __vfs_read+0x26/0x140 [<ffffffff8120e9da>] vfs_read+0x7a/0x120 [<ffffffff8120faf2>] SyS_read+0x42/0xa0 [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7 When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls filp_close() which also removes all posix locks. The lock struct is initialized like so in filp_close() and passed down to cifs ... lock.fl_type = F_UNLCK; lock.fl_flags = FL_POSIX | FL_CLOSE; lock.fl_start = 0; lock.fl_end = OFFSET_MAX; ... Note the FL_CLOSE flag, which hints the VFS code that this unlocking is done for closing the fd. filp_close() locks_remove_posix(filp, id); vfs_lock_file(filp, F_SETLK, &lock, NULL); return filp->f_op->lock(filp, cmd, fl) => cifs_lock() rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid); rc = server->ops->mand_unlock_range(cfile, flock, xid); if (flock->fl_flags & FL_POSIX && !rc) rc = locks_lock_file_wait(file, flock) Notice how we don't call locks_lock_file_wait() which does the generic VFS lock/unlock/wait work on the inode if rc != 0. If we are closing the handle, the SMB server is supposed to remove any locks associated with it. Similarly, cifs.ko frees and wakes up any lock and lock waiter when closing the file: cifs_close() cifsFileInfo_put(file->private_data) /* * Delete any outstanding lock records. We'll lose them when the file * is closed anyway. */ down_write(&cifsi->lock_sem); list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) { list_del(&li->llist); cifs_del_lock_waiters(li); kfree(li); } list_del(&cifs_file->llist->llist); kfree(cifs_file->llist); up_write(&cifsi->lock_sem); So we can safely ignore unlocking failures in cifs_lock() if they happen with the FL_CLOSE flag hint set as both the server and the client take care of it during the actual closing. This is not a proper fix for the unlocking failure but it's safe and it seems to prevent the lock leakages and crashes the customer experiences. Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
NeilBrown <neil@brown.name> Signed-off-by:
Steve French <stfrench@microsoft.com> Acked-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Razvan Stefanescu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 69646d7a upstream. In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by:
Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by:
Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Myungho Jung authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit e20a2e9c upstream. When releasing socket, it is possible to enter hci_sock_release() and hci_sock_dev_event(HCI_DEV_UNREG) at the same time in different thread. The reference count of hdev should be decremented only once from one of them but if storing hdev to local variable in hci_sock_release() before detached from socket and setting to NULL in hci_sock_dev_event(), hci_dev_put(hdev) is unexpectedly called twice. This is resolved by referencing hdev from socket after bt_sock_unlink() in hci_sock_release(). Reported-by: syzbot+fdc00003f4efff43bc5b@syzkaller.appspotmail.com Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Jeremy Compostella authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 89c6efa6 upstream. On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes data out of the msgbuf1 array boundary. It is possible from a user application to run into that issue by calling the I2C_SMBUS ioctl with data.block[0] greater than I2C_SMBUS_BLOCK_MAX + 1. This patch makes the code compliant with Documentation/i2c/dev-interface by raising an error when the requested size is larger than 32 bytes. Call Trace: [<ffffffff8139f695>] dump_stack+0x67/0x92 [<ffffffff811802a4>] panic+0xc5/0x1eb [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a Signed-off-by:
Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org [connoro@google.com: 4.9 backport: adjust filename] Signed-off-by:
Connor O'Brien <connoro@google.com> Signed-off-by:
-
Yang Shi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit a7f40cfe upstream. When MPOL_MF_STRICT was specified and an existing page was already on a node that does not follow the policy, mbind() should return -EIO. But commit 6f4576e3 ("mempolicy: apply page table walker on queue_pages_range()") broke the rule. And commit c8633798 ("mm: mempolicy: mbind and migrate_pages support thp migration") didn't return the correct value for THP mbind() too. If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an existing page was already on a node that does not follow the policy. And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified. Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c [akpm@linux-foundation.org: tweak code comment] Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com Fixes: 6f4576e3 ("mempolicy: apply page table walker on queue_pages_range()") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by:
Oscar Salvador <osalvador@suse.de> Reported-by:
Cyril Hrubis <chrubis@suse.cz> Suggested-by:
Kirill A. Shutemov <kirill@shutemov.name> Acked-by:
Rafael Aquini <aquini@redhat.com> Reviewed-by:
David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Razvan Stefanescu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit f3040983 upstream. Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit f8ae107e upstream. The initial value (@M) compute is: m = 1UL << (BITS_PER_LONG - 2); while (m > x) m >>= 2; Which is a linear search for the highest even bit smaller or equal to @x We can implement this using a binary search using __fls() (or better when its hardware implemented). m = 1UL << (__fls(x) & ~1UL); Especially for small values of @x; which are the more common arguments when doing a CDF on idle times; the linear search is near to worst case, while the binary search of __fls() is a constant 6 (or 5 on 32bit) branches. cycles: branches: branch-misses: PRE: hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681 cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219 SOFTWARE FLS: hot: 29.576176 +- 0.028850 26.666730 +- 0.004511 0.019463 +- 0.000663 cold: 165.947136 +- 0.188406 26.666746 +- 0.004511 6.133897 +- 0.004386 HARDWARE FLS: hot: 24.720922 +- 0.025161 20.666784 +- 0.004509 0.020836 +- 0.000677 cold: 132.777197 +- 0.127471 20.666776 +- 0.004509 5.080285 +- 0.003874 Averages computed over all values <128k using a LFSR to generate order. Cold numbers have a LFSR based branch trace buffer 'confuser' ran between each int_sqrt() invocation. Link: http://lkml.kernel.org/r/20171020164644.936577234@infradead.orgSigned-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by:
Joe Perches <joe@perches.com> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 5e86bdda upstream. Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function. Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Jari Ruusu <jari.ruusu@gmail.com> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 6bd28856 upstream. Debug exception handlers may be called for exceptions generated both by user and kernel code. In many cases, this is checked explicitly, but in other cases things either happen to work by happy accident or they go slightly wrong. For example, executing 'brk #4' from userspace will enter the kprobes code and be ignored, but the instruction will be retried forever in userspace instead of delivering a SIGTRAP. Fix this issue in the most stable-friendly fashion by simply adding explicit checks of the triggering exception level to all of our debug exception handlers. Cc: <stable@vger.kernel.org> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit b9a4b9d0 upstream. FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by taking a hardware watchpoint. Unfortunately, if a debug handler returns a non-zero value, then we will propagate the UNKNOWN FAR value to userspace via the si_addr field of the SIGTRAP siginfo_t. Instead, let's set si_addr to take on the PC of the faulting instruction, which we have available in the current pt_regs. Cc: <stable@vger.kernel.org> Reviewed-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1826212Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 4a2e2b19 ] If STM=n, it doesn't make sense to ask about STM_DUMMY and STM_SOURCE_CONSOLE support, which are not even built when enabled anyway. Hence hide these options if STM=n. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Mathieu Poirier authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit b15f0fb6 ] The coresight drivers have absolutely no control over bind and unbind operations triggered from sysfs. The operations simply can't be cancelled or denied event when one or several tracing sessions are under way. Since the memory associated to individual device is invariably freed, the end result is a kernel crash when the path from source to sink is travelled again as demonstrated here[1]. One solution could be to keep track of all the path (i.e tracing session) that get created and iterate through the elements of those path looking for the coresight device that is being removed. This proposition doesn't scale well since there is no upper bound on the amount of concurrent trace session that can be created. With the above in mind, this patch prevent devices from being unbounded from their driver by using the driver->suppress_bind_attr option. That way trace sessions can be managed without fearing to loose devices. Since device can't be removed anymore the xyz_remove() functions found in each driver is also removed. [1]. http://www.spinics.net/lists/arm-kernel/msg474952.htmlReported-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 5c2a6259 ] As is the case for a number of other architectures that have a 32-bit compat mode, enable KEYS_COMPAT if both COMPAT and KEYS are enabled. This allows AArch32 programs to use the keyctl() system call when running on an AArch64 kernel. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit cf4df407 upstream. This reverts commit 32fd87b3. Alan wrote a better fix for this... Cc: Andrey Konovalov <andreyknvl@google.com> Cc: stable <stable@vger.kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 6cbcf596 upstream. A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit ddba9180 upstream. KVM's API requires thats ioctls must be issued from the same process that created the VM. In other words, userspace can play games with a VM's file descriptors, e.g. fork(), SCM_RIGHTS, etc..., but only the creator can do anything useful. Explicitly reject device ioctls that are issued by a process other than the VM's creator, and update KVM's API documentation to extend its requirements to device ioctls. Fixes: 852b6d57 ("kvm: add device control API") Cc: <stable@vger.kernel.org> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit bebd024e upstream. The SMT disable 'nosmt' command line argument is not working properly when CONFIG_HOTPLUG_CPU is disabled. The teardown of the sibling CPUs which are required to be brought up due to the MCE issues, cannot work. The CPUs are then kept in a half dead state. As the 'nosmt' functionality has become popular due to the speculative hardware vulnerabilities, the half torn down state is not a proper solution to the problem. Enforce CONFIG_HOTPLUG_CPU=y when SMP is enabled so the full operation is possible. Reported-by:
Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit f3b4e06b upstream. A TSC packet can slip past MTC packets so that the timestamp appears to go backwards. One estimate is that can be up to about 40 CPU cycles, which is certainly less than 0x1000 TSC ticks, but accept slippage an order of magnitude more to be on the safe side. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 79b58424 ("perf tools: Add Intel PT support for decoding MTC packets") Link: http://lkml.kernel.org/r/20190325135135.18348-1-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Axel Lin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c5bc6e52 upstream. Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a40 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Reviewed-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 23da9588 upstream. Syzkaller reports: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599 Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91 RSP: 0018:ffff8881d828f238 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267 RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178 RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259 R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4 R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000 FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0xbc/0x1000 [br_netfilter] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 770020de38961fd0 ]--- A new dir entry can be created in get_subdir and its 'header->parent' is set to NULL. Only after insert_header success, it will be set to 'dir', otherwise 'header->parent' is set to NULL and drop_sysctl_table is called. However in err handling path of get_subdir, drop_sysctl_table also be called on 'new->header' regardless its value of parent pointer. Then put_links is called, which triggers NULL-ptr deref when access member of header->parent. In fact we have multiple error paths which call drop_sysctl_table() there, upon failure on insert_links() we also call drop_sysctl_table().And even in the successful case on __register_sysctl_table() we still always call drop_sysctl_table().This patch fix it. Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by:
-
Wentao Wang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 3ec80029 upstream. Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd45316 ("kgdboc: Fix restrict error") Signed-off-by:
Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 84f3b43f upstream. This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Cc: stable@vger.kernel.org Signed-off-by:
Bjørn Mork <bjorn@mork.no> [ johan: use tabs to align comments in adjacent lines ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Mans Rullgard authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit f8df5c2c upstream. The SIMCom SIM5218 and compatible devices have 5 USB interfaces, only 4 of which are serial ports. The fifth is a network interface supported by the qmi-wwan driver. Furthermore, the serial ports do not support modem control signals. Add driver_info flags to reflect this. Signed-off-by:
Mans Rullgard <mans@mansr.com> Fixes: ec0cd94d ("usb: option: add SIMCom SIM5218") Cc: stable <stable@vger.kernel.org> # 3.2 Signed-off-by:
-
Lin Yi authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 2908b076 upstream. The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by:
Lin Yi <teroincn@163.com> Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by:
-
George McCollister authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 422c2537 upstream. Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be automatically detected. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit a595ecdd upstream. Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor. Reported-by:
Uli <t9cpu@web.de> Signed-off-by:
-
Hoan Nguyen An authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 93bcefd4 upstream. We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by:
Hoan Nguyen An <na-hoan@jinso.co.jp> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 3a10e3dd upstream. of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 3b9c2f2e upstream. It appears on some slower systems that the driver can find its way out of the workqueue while the interrupt is disabled by continuous polling by it. Move MACvIntEnable to vnt_interrupt_work so that it is always enabled on all routes out of vnt_interrupt_process. Move MACvIntDisable so that the device doesn't keep polling the system while the workqueue is being processed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> CC: stable@vger.kernel.org # v4.2+ Signed-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit cc26358f upstream. A check for vif is made in vnt_interrupt_work. There is a small chance of leaving interrupt disabled while vif is NULL and the work hasn't been scheduled. Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c85be041 upstream. In case dmaengine_prep_dma_cyclic fails, the fix returns a proper error code to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Fixes: 34df42f5 ("serial: at91: add rx dma support") Acked-by:
-
