- 12 Jun, 2021 22 commits
-
-
Corentin Labbe authored
The SL3516 SoC has a crypto offloader IP. This patch adds it on the gemini SoC Device-tree. Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.orgSigned-off-by:
Corentin Labbe <clabbe@baylibre.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to improve the Allwinner SoCs support, mainly: - I2S Support for the V3 - Audio Codec Support for the V3s - DMA support for the V3s - PWM support for the V3s - Support for Bluetooth Audio on the pinephone - Add A10-like timers to the A64 and R40 - New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5 * tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits) ARM: dts: sun8i: v3s: enable emac for zero Dock arm64: dts: allwinner: pinephone: Set audio card name ARM: dts: sun8i: r40: Add timer node ARM: dts: sun8i: V3: add I2S interface to V3 dts dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible ARM: dts: sun8i: V3: add codec analog frontend to V3 dts ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA ARM: dts: sun8i: v3s: add DMA controller to v3s dts ARM: dts: sun8i: v3s: add pwm controller to v3s dts dt-bindings: pwm: allwinner: add v3s pwm compatible arm64: dts: allwinner: h5: Add NanoPi R1S H5 support dt-bindings: arm: Add NanoPi R1S H5 arm64: dts: allwinner: pinephone: Add support for Bluetooth audio arm64: dts: allwinner: a64: Allow multiple DAI links arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3 arm64: dts: allwinner: a64: Allow using multiple codec DAIs ARM: dts: sun8i-a33: Allow using multiple codec DAIs ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells ... Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhostSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxOlof Johansson authored
AT91 dt for 5.14: - A fix for sama5d4 gpio mux - A trivial fix for DT documentation * tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: i2c: at91: fix example for scl-gpios ARM: dts: at91: sama5d4: fix pinctrl muxing Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - split hardware encoder block into two devices. mt8167: - add pm domains, multi-media system (mmsys), SMI, local arbiter (larb) and IOMMU nodes. mt8183: - Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3. - add power domain to SMI common node. - add power supplies for EEPROM node. * tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits) arm64: dts: mt8183: Add node for the Mali GPU arm64: dts: mt8183-kukui: Add tboard thermal zones arm64: dts: mt8183: add cbas node under cros_ec arm64: dts: mt8183: add supply name for eeprom arm64: dts: mt8183: remove syscon from smi_common node arm64: dts: mt8183: Add kukui-jacuzzi-fennel board arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board arm64: dts: mt8183: Add kukui-jacuzzi-burnet board arm64: dts: mt8183: Add kukui-jacuzzi-willow board arm64: dts: mt8183: Add kukui-jacuzzi-kappa board dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-fennel dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kenzo dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-burnet dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-willow dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kappa arm64: dts: mediatek: mt8167: add iommu node arm64: dts: mediatek: mt8167: add larb nodes arm64: dts: mediatek: mt8167: add smi_common node arm64: dts: mediatek: mt8167: add mmsys node arm64: dts: mediatek: mt8167: add power domains ... Link: https://lore.kernel.org/r/117d5eb5-bc99-70bb-a1a9-d7141fe96527@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.14 - Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs, - Document support for the new RZ/G2L SMARC EVK board. * tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller dt-bindings: arm: renesas: Document SMARC EVK dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 (take two) - External interrupt (INTC-EX) support for the R-Car M3-W+ SoC, - Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r9a07g044: Add SYSC node arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's dt-bindings: clock: Add r9a07g044 CPG Clock Definitions arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node arm64: dts: renesas: r8a77961: Add INTC-EX device node ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages arm64: dts: renesas: Add missing opp-suspend properties Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno fix for v5.14 Just a single fix to use standard and generic nodes names for SCMI power domain controller and clock controller devicetree nodes. * tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Update SCPI nodes as per the YAML schema Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Some Ux500 DTS updates for v5.14: - Fix interrupt cells, GPIO controller node names in accordance with new YAML schemas. - Add proper compatible strings for Broadcomm Wifi and BT. - Fix upp and add some mount matrices for accelerometers so e.g. UI:s work as they should. - Drop the DRDY pin assignment for a non-existing pin on a magnetometer. * tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Fix orientation of Janice accelerometer ARM: dts: href: Mount matrices for TVK R2 ARM: dts: ux500: Fix some compatible strings ARM: dts: ux500: Drop drdy pin assignment from magnetometer ARM: dts: ux500: Fix orientation of accelerometer ARM: dts: ux500: Rename gpio-controller node ARM: dts: ux500: Fix interrupt cells Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs changes for 5.14, please pull the following: - Zhen fixes the Broadcom stingray serial node unit names to fix a DT binding warning * tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: normalize the node name of the UART devices Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.14, please pull the following: - Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS files to resolve a number of DT binding check warnings pertaining to NAND, pinmux, clocks, SPI - Stefan provides a fix for an increase in the DWC2 controller's RX FIFO causing regressions on the Raspberry Pi 4B - Mateusz adds a BCM2711 specific VEC compatible string to allow keying off that variant properly - Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI re-organization work and finally adding the DTS file proper * tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 400 ARM: dts: Add Raspberry Pi 400 support ARM: dts: bcm283x: Fix up GPIO LED node names dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema ARM: dts: Move BCM2711 RPi specific into separate dtsi ARM: dts: bcm283x: Fix up MMC node names ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size" ARM: dts: BCM5301X: Fixup SPI binding dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema ARM: dts: BCM5301X: Fix pinmux subnodes names ARM: dts: Hurricane 2: Fix NAND nodes names ARM: dts: BCM63xx: Fix NAND nodes names ARM: NSP: dts: fix NAND nodes names ARM: Cygnus: dts: fix NAND nodes names ARM: brcmstb: dts: fix NAND nodes names ARM: dts: BCM5301X: Fix NAND nodes names Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.14, round 1 Highlights: ----------- MCU part: - Fixes for Yaml verifications MPU part: - Configure qspi's mdma transfer to block for stm32mp151 - ST boards: - Fixes for yaml verifications - DH boards: - Fixes for yaml verifications - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence. - Odyssey boards: - fix Sd card detectection (gpio line updated) - fix eMMC VQMMC suuply (use vdd instead of v3v3) * tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: fix stpmic node for stm32mp1 boards ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply ARM: dts: stm32: add a new DCMI pins group on stm32mp15 ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 dt-bindings: net: document ptp_ref clk in dwmac ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings ARM: dts: stm32: fix RCC node name on stm32f429 MCU ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.14 1. Several cleanups and alignment with dtschema. This includes removal of unused properties and fixing LED brightness property. 2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for example from Suspend to RAM where the PMIC RTC's power is still supplied). 3. Disable unused/not implemented camera on GT-I9100. * tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Disable unused camera input for I9100 ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420 ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3 ARM: dts: exynos: enable PMIC wakeup from suspend on Midas ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412 ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4 ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1 ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3 ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100 ARM: dts: exynos: align Broadcom WiFi with dtschema Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.14 - IBM Rainier and Everest LED descriptions. These systems have a large number of LEDs attached via expanders. - Ampere Mt Jade updates, as OpenBMC bringup continues for this machine. - Updated 64MB flash layout for systems using OpenBMC on NOR root file systems. - Support for HS200 MMC on AST2600 EVB. This is only supported from A2, so a new device tree is added to support A0 and A1. - Update all command lines for early serial output. * tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: everest: Add pcie cable card indicator leds ARM: dts: aspeed: everest: Add vrm and other indicator leds ARM: dts: aspeed: everest: Add dimm indicator leds ARM: dts: aspeed: everest: Add pcie slot indicator leds ARM: dts: aspeed: everest: Add nvme and fan indicator leds ARM: dts: aspeed: everest: Add system level indicator leds ARM: dts: aspeed-g5: Add SCU phandle to GFX node ARM: dts: aspeed: Everest: Add directly controlled LEDs ARM: dts: aspeed: Rainier 4U: Remove fan updates ARM: dts: aspeed: Everest: Fix cable card PCA chips ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout ARM: dts: aspeed: mtjade: switch to 64MB flash layout ARM: dts: aspeed: mtjade: Add PSU support ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI ARM: dts: aspeed: Set earlycon boot argument ARM: dts: aspeed-g6: Add pinctrl settings ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0 ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller. ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb. Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.comSigned-off-by:
-
Linus Walleij authored
Add the crypto engine as a child of the NPE. Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changed for v5.14: - set 128bytes FIFO size on uart A - add Banana PI BPI-M5 board dts & bindings - meson-sm1: add toacodec node to use internal audio DAC - enable hdmi audio loopback on VIM3 board * tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: set 128bytes FIFO size on uart A arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts dt-bindings: arm: amlogic: add Banana PI M5 bindings arm64: dts: meson-sm1: add toacodec node arm64: dts: meson: vim3: enable hdmi audio loopback Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.14 merge window Mostly just clean-up for device tree binding checks with few other clean-up patches: - Drop ov5640 sensor for dra76-evm, it's just one of the optional additional sensors and makes hard to use any of the other options, TI is using the devicetree overlay snippets for these - Group the phandles in osd3358-sm-red to make the files more readable - A series of gpio clean-up patches to follow the binding documentation - Move ti,no-reset related properties to the target module level, the ti-sysc driver handles them also in the child but they really belong to the target module - Drop the unnecessary uart compatible entries to make the binding check to work - Mailbox related updates to make the binding check to work * tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes ARM: dts: OMAP2420: Drop interrupt-names from mailbox node ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema ARM: dts: omap5-board-common: align gpio hog names with dt-schema ARM: dts: omap3: align gpio hog names with dt-schema ARM: dts: am437x: align gpio hog names with dt-schema ARM: dts: am335x: align GPIO hog names with dt-schema ARM: dts: osd3358-sm-red: group in the same phandle all its properties ARM: dts: dra76-evm: remove ov5640 Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.14 - GPIO extender support for the Falcon development board, - Switches support for the ALT development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: alt: Add SW2 as GPIO keys ARM: dts: renesas: Move enable-method to CPU nodes arm64: dts: renesas: beacon: Fix USB ref clock references arm64: dts: renesas: beacon: Fix USB extal reference ARM: dts: rcar-gen1: Correct internal delay for i2c[123] arm64: dts: renesas: eagle: Add x1 clock ARM: dts: koelsch: Rename sw2 to keyboard ARM: dts: r8a7779, marzen: Fix DU clock names arm64: dts: renesas: v3msk: Fix memory size arm64: dts: renesas: condor: Switch eMMC bus to 1V8 arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders arm64: dts: renesas: beacon kit: Setup AVB refclk arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.beSigned-off-by:
-
Olof Johansson authored
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini device tree updates for the v5.14 kernel: - MAINTAINERS fix for the DTS files - Drop a duplicate ethernet node on the RUT1xx DTS - Add device_type to the PCI node - Fix up some DTS syntax so it agrees with the schemas merged for the v5.14 merge window * tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: remove xxx-cells from display ARM: dts: gemini-dlink-dir-685: Remove address from display port ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c ARM: dts: gemini: convert obsolete SPI properties ARM: dts: gemini: use the right rtc compatible ARM: dts: gemini: add device_type on pci ARM: dts: gemini-rut1xx: remove duplicate ethernet node ARM: dts: gemini: rename mdio to the right name MAINTAINERS: gemini: add missing dts pattern Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.comSigned-off-by:
-
Olof Johansson authored
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS updates for the v5.14 kernel: - Add ethernet to the boards - Add PCI hosts to the boards - Create an expansion bus around the flash memory - Add the beeper to NSLU2 completing the NSLU2 DTS * tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Fix up the IXP4xx ethernet nodes ARM: dts: ixp4xx: Add beeper to the NSLU2 ARM: dts: ixp4xx: Create a proper expansion bus ARM: dts: ixp4xx: Add PCI hosts ARM: dts: ixp4xx: Add ethernet Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.comSigned-off-by:
-
Corentin Labbe authored
This patch adds devicetree for intel-ixp42x-welltech-epbx100. Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.comSigned-off-by:
-
Corentin Labbe authored
Adds welltech,epbx100 as a valid intel-ixp4xx board. Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.comSigned-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Corentin Labbe authored
Add vendor prefix for Welltech computer Co Ld. Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.comSigned-off-by:
-
- 10 Jun, 2021 18 commits
-
-
Alexandre Torgue authored
On some STM32 MP15 boards, stpmic node is not correct which generates warnings running "make dtbs_check W=1" command. Issues are: -"regulator-active-discharge" is not a boolean but an uint32. -"regulator-over-current-protection" is not a valid entry for vref_ddr. -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed. Signed-off-by:Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
Fix the following dtbs_check warning: spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$' Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Marek Vasut authored
Fix the following dtbs_check warning: eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$' Signed-off-by:
-
Marek Vasut authored
Fix the following dtbs_check warning: touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Grzegorz Szymaszek authored
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by:
Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by:
-
Lad Prabhakar authored
Add SYSC node to RZ/G2L (R9A07G044) SoC .dtsi. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210609163717.3083-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Lad Prabhakar authored
Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2): - memory - External input clock - SCIF Signed-off-by:
-
Lad Prabhakar authored
Add initial DTSI for RZ/G2{L,LC} SoC's. File structure: r9a07g044.dtsi => RZ/G2L family SoC common parts r9a07g044l1.dtsi => RZ/G2L R9A07G044L1 SoC specific parts r9a07g044l2.dtsi => RZ/G2L R9A07G044L2 SoC specific parts Signed-off-by: -
Geert Uytterhoeven authored
Renesas RZ/G2L DT Binding Definitions Clock definitions for the Renesas RZ/G2L (R9A07G044) SoC, shared by driver and DT source files.
-
Grzegorz Szymaszek authored
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was incompatible with the pins used on the Odyssey board, where: - there are 8 data pins instead of 12, - DCMI_HSYNC is available at PA4 instead of PH8, - DCMI_D0 is at PC6 instead of PH9, - DCMI_D3 is at PE1 instead of PH12, - DCMI_D4 is at PE11 instead of PH14, - DCMI_D5 is at PD3 instead of PI4, - DCMI_D6 is at PE13 instead of PB8, - DCMI_D7 is at PB9 instead of PE6. Add the DCMI pins used on the Odyssey board as a new DCMI pin state definition, dcmi-1, AKA phandle dcmi_pins_b. Signed-off-by:
-
Lad Prabhakar authored
Add DT binding documentation for SYSC controller found on RZ/G2{L,LC,UL} SoC's. SYSC block contains the LSI_DEVID register which is used to retrieve SoC product information. Signed-off-by: -
Lad Prabhakar authored
Document Renesas SMARC EVK board which are based on RZ/G2L (R9A07G044) SoC. The SMARC EVK consists of RZ/G2L SoM module and SMARC carrier board, the SoM module sits on top of carrier board. Signed-off-by:
Chris Paterson <Chris.Paterson2@renesas.com> Acked-by:
-
Lad Prabhakar authored
Add device tree bindings documentation for Renesas RZ/G2{L,LC} SoC variants. Signed-off-by: -
Lad Prabhakar authored
Add device tree bindings documentation for Renesas RZ/G2UL SoC. Signed-off-by:
-
Lad Prabhakar authored
Define RZ/G2L (R9A07G044) Clock Pulse Generator Core Clock and module clock outputs, as listed in Table 8.3 ("Clock List") of the RZ/G2L Hardware User's Manual (Rev.0.42, Feb.2021). Signed-off-by: -
Alexandre Torgue authored
It prevents the following warning: pin-controller@50002000: 'ltdc' does not match any of the regexes: '-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+' Signed-off-by: -
Alexandre Torgue authored
ptp_ref clk has been added in DT but not documented which makes yaml validation failed: ethernet@5800a000: clocks: [[6, 105], [6, 103], [6, 104], [6, 123], [6, 169], [6, 112]] is too long ethernet@5800a000: clock-names: ['stmmaceth', 'mac-clk-tx', 'mac-clk-rx', 'eth-ck', 'ptp_ref', 'ethstp'] is too long Reviewed-by:
-
Alexandre Torgue authored
It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by:
-
