* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: don't respond to broadcast write requests
  firewire: clean up fw_card reference counting
  firewire: clean up some includes
  firewire: remove unused struct members
  firewire: implement broadcast_channel CSR for 1394a compliance
  ieee1394: dump mmapped iso buffers in core files
  ieee1394: raw1394: Push the BKL down into the driver ioctls
  ieee1394: video1394: reorder module init, prepare BKL removal
  ieee1394: reduce log noise about config ROM CRC errors

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: rename slab_destroy_objs
  slub: current is always valid
  slub: Add check for kfree() of non slab objects.

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  AHCI: Remove an unnecessary flush from ahci_qc_issue
  AHCI: speed up resume
  [libata] Add support for VPD page b1
  ata: endianness annotations in pata drivers
  libata-eh: update atapi_eh_request_sense() to take @dev instead of @qc
  [libata] sata_svw: update code comments relating to data corruption
  libata/ahci: enclosure management support
  libata: improve EH internal command timeout handling
  libata: use ULONG_MAX to terminate reset timeout table
  libata: improve EH retry delay handling
  libata: consistently use msecs for time durations

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits)
  i2c: Add detection capability to new-style drivers
  i2c: Call client_unregister for new-style devices too
  i2c: Clean up old chip drivers
  i2c-ibm_iic: Register child nodes
  i2c: New-style EEPROM driver using device IDs
  i2c: Export the i2c_bus_type symbol
  i2c-au1550: Fix PM support
  i2c-dev: Delete empty detach_client callback
  i2c: Drop stray references to lm_sensors
  i2c: Check for ACPI resource conflicts
  i2c-ocores: basic PM support
  i2c-sibyte: SWARM I2C board initialization
  i2c-i801: Fix handling of error conditions
  i2c-i801: Rename local variable temp to status
  i2c-i801: Properly report bus arbitration loss
  i2c-i801: Remove verbose debugging messages
  i2c-algo-pcf: Drop unused struct members
  i2c-algo-pcf: Multi-master lost-arbitration improvement
  i2c: Deprecate the legacy gpio drivers
  i2c-pxa: Initialize early
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (80 commits)
  ide-floppy: fix unfortunate function naming
  ide-tape: unify idetape_create_read/write_cmd
  ide: add ide_pc_intr() helper
  ide-{floppy,scsi}: read Status Register before stopping DMA engine
  ide-scsi: add more debugging to idescsi_pc_intr()
  ide-scsi: use pc->callback
  ide-floppy: add more debugging to idefloppy_pc_intr()
  ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled
  ide-tape: add ide_tape_io_buffers() helper
  ide-tape: factor out DSC handling from idetape_pc_intr()
  ide-{floppy,tape}: move checking of ->failed_pc to ->callback
  ide: add ide_issue_pc() helper
  ide: add PC_FLAG_DRQ_INTERRUPT pc flag
  ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()
  ide: add ide_transfer_pc() helper
  ide-scsi: set drive->scsi flag for devices handled by the driver
  ide-{cd,floppy,tape}: remove checking for drive->scsi
  ide: add PC_FLAG_ZIP_DRIVE pc flag
  ide-tape: factor out waiting for good ireason from idetape_transfer_pc()
  ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()
  ...

mv idefloppy_transfer_pc1 idefloppy_start_pc_transfer
mv idefloppy_transfer_pc2 idefloppy_transfer_pc

which describes their functionality and disambiguates them. There should be no
functionality change introduced by this patch.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

A straightforward one. There should be no functional change resulting from this
change.

[bart: minor fixups]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ide-tape.c: add 'drive' argument to idetape_update_buffers().

* Add generic ide_pc_intr() helper to ide-atapi.c and then
  convert ide-{floppy,tape,scsi} device drivers to use it.

* ide-tape.c: remove no longer needed DBG_PC_INTR.

There should be no functional changes caused by this patch
(unless the debugging is explicitely compiled in).

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Read Status Register before stopping DMA engine to match ide-tape
device driver - it should be safe and shouldn't affect anything.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add more debugging to idescsi_pc_intr() to match ide-tape's
idetape_pc_intr().

While at it:

* Correct the first debug message.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_scsi_callback() pc->callback implementation, then update
  idescsi_check_condition() and idescsi_queue() to setup ->callback.

* Convert idescsi_pc_intr() to use pc->callback.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add more debugging to idefloppy_pc_intr() to match ide-tape's
idetape_pc_intr().

While at it:

* Correct the first debug message.

* Log device name with "DMA finished" message.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add DBG_PC_INTR debug level and use it to always log debug info
in idetape_pc_intr() if debugging is enabled.

While at it:

* Use drive->name instead of tape->name.

* Log device name with "DMA finished" message.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_tape_io_buffers() helper which is a wrapper for
  idetape_{in,out}put_buffers() and convert idetape_pc_intr()
  to use it.

* Remove no longer used idetape_io_buf typedef.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>---

Factor out DSC handling from idetape_pc_intr() to ide_tape_handle_dsc()
helper as a preparation for adding generic ide_pc_intr() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move checking/resetting of ->failed_pc from ide*_pc_intr() to ->callback
as a preparation for adding generic ide_pc_intr() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>---

Add generic ide_issue_pc() helper to ide-atapi.c and then
convert ide-{floppy,tape,scsi} device drivers to use it.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request()
and check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT)
in ide*_issue_pc().  This is a preparation for adding generic
ide_issue_pc() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move idescsi_map_sg() call out from idescsi_issue_pc()
to idescsi_do_request() as a preparation to adding generic
ide_issue_pc() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide-atapi.c file for generic ATAPI support together with
  CONFIG_IDE_ATAPI config option.

* Add generic ide_transfer_pc() helper to ide-atapi.c and then
  convert ide-{floppy,tape,scsi} device drivers to use it.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is a preparation for adding generic ide_transfer_pc() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove checking for drive->scsi which is no longer set by IDE core code
(leave the flag since it will be re-used for generic ATAPI support).

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add PC_FLAG_ZIP_DRIVE pc flag, set it in idefloppy_do_request()
and check for it (instead of checking for IDEFLOPPY_FLAG_ZIP_DRIVE)
in idefloppy_transfer_pc().  This is a preparation for adding
generic ide_transfer_pc() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out waiting for good ireason from idetape_transfer_pc()
to ide_tape_wait_ireason() as a preparation for adding generic
ide_transfer_pc() helper.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() instead of
idetape_issue_pc() to match the other ATAPI device drivers.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Start DMA engine and set PC_FLAG_DMA_IN_PROGRESS flag in
idefloppy_transfer_pc1() instead of idefloppy_issue_pc()
so the Status Register and the Interrupt Reason Register
are checked first.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one.

* Remove no longer used PC_FLAG_DMA_RECOMMENDED flag.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Merge pc->idefloppy_callback and pc->idetape_callback into pc->callback.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The appropriate functionality of the callback is established through querying
the ATAPI packet command in pc->c[0].

While at it, simplify if (floppy->failed_pc)-branch to be found in the original
idefloppy_request_sense_callback().

Bart:
- keep handling for blk_pc_request() requests unchanged + add FIXME
- add uptodate variable + leave just one idefloppy_end_request() call
- add newline to the debug message
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The appropriate functionality of the callback is established through querying
the ATAPI packet command in pc->c[0].

While at it:
- add uptodate variable + leave just one idetape_end_request() call
- don't use HWGROUP() macro

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

idetape_retry_pc() always returns ide_stopped so make it void.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Log device name instead of driver name in *_pc_intr() and *_transfer_pc*().

While at it:

* Merge two consecutive printk()-s in *_pc_intr() together.

* Replace "floppy"/"tape"/"scsi" references in printk()-s by "device".

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Check IDEFLOPPY_FLAG_ZIP_DRIVE flag in idefloppy_transfer_pc1()
  and skip idefloppy_transfer_pc2()-phase if the flag is not set.

* Always use idefloppy_transfer_pc1() in idefloppy_issue_pc()
  and remove no longer needed idefloppy_transfer_pc().

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

PC_FLAG_DMA_IN_PROGRESS flag is never set if DMA support is disabled.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_dma_off() prints info about DMA being disabled.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_dma_off() prints info about DMA being disabled.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>