- 11 Feb, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
wireless fixes for v5.17 Second set of fixes for v5.17. This is the first pull request with both driver and stack patches. Most important here are a regression fix for brcmfmac USB devices and an iwlwifi fix for use after free when the firmware was missing. We have new maintainers for ath9k and wcn36xx as well as ath6kl is now orphaned. Also smaller fixes to iwlwifi and stack.
-
David S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Add selftest for nft_synproxy, from Florian Westphal. 2) xt_socket destroy path incorrectly disables IPv4 defrag for IPv6 traffic (typo), from Eric Dumazet. 3) Fix exit value selftest nft_concat_range.sh, from Hangbin Liu. 4) nft_synproxy disables the IPv4 hooks if the IPv6 hooks fail to be registered. 5) disable rp_filter on router in selftest nft_fib.sh, also from Hangbin Liu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event() Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing. BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0xffff88815883e000 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker Fixes: 4ea7e386 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen Gu authored
The callback functions of clcsock will be saved and replaced during the fallback. But if the fallback happens more than once, then the copies of these callback functions will be overwritten incorrectly, resulting in a loop call issue: clcsk->sk_error_report |- smc_fback_error_report() <------------------------------| |- smc_fback_forward_wakeup() | (loop) |- clcsock_callback() (incorrectly overwritten) | |- smc->clcsk_error_report() ------------------| So this patch fixes the issue by saving these function pointers only once in the fallback and avoiding overwriting. Reported-by: syzbot+4de3c0e8a263e1e499bc@syzkaller.appspotmail.com Fixes: 341adeec ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Link: https://lore.kernel.org/r/0000000000006d045e05d78776f6@google.comSigned-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and can. Current release - new code bugs: - sparx5: fix get_stat64 out-of-bound access and crash - smc: fix netdev ref tracker misuse Previous releases - regressions: - eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid overflows - eth: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP - bonding: fix rare link activation misses in 802.3ad mode Previous releases - always broken: - tcp: fix tcp sock mem accounting in zero-copy corner cases - remove the cached dst when uncloning an skb dst and its metadata, since we only have one ref it'd lead to an UaF - netfilter: - conntrack: don't refresh sctp entries in closed state - conntrack: re-init state for retransmitted syn-ack, avoid connection establishment getting stuck with strange stacks - ctnetlink: disable helper autoassign, avoid it getting lost - nft_payload: don't allow transport header access for fragments - dsa: fix use of devres for mdio throughout drivers - eth: amd-xgbe: disable interrupts during pci removal - eth: dpaa2-eth: unregister netdev before disconnecting the PHY - eth: ice: fix IPIP and SIT TSO offload" * tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister net: mscc: ocelot: fix mutex lock error during ethtool stats read ice: Avoid RTNL lock when re-creating auxiliary device ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler ice: fix IPIP and SIT TSO offload ice: fix an error code in ice_cfg_phy_fec() net: mpls: Fix GCC 12 warning dpaa2-eth: unregister the netdev before disconnecting from the PHY skbuff: cleanup double word in comment net: macb: Align the dma and coherent dma masks mptcp: netlink: process IPv6 addrs in creating listening sockets selftests: mptcp: add missing join check net: usb: qmi_wwan: Add support for Dell DW5829e vlan: move dev_put into vlan_dev_uninit vlan: introduce vlan_dev_free_egress_priority ax25: fix UAF bugs of net_device caused by rebinding operation net: dsa: fix panic when DSA master device unbinds on shutdown net: amd-xgbe: disable interrupts during pci removal tipc: rate limit warning for received illegal binding update net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE ...
-
- 10 Feb, 2022 24 commits
-
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build and run-time fixes to pidfd, clone3, and ir tests" * tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ir: fix build with ancient kernel headers selftests: fixup build warnings in pidfd / clone3 tests pidfd: fix test failure due to stack overflow on some arches
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Fixes to the test and usage documentation" * tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: KUnit: Fix usage bug kunit: fix missing f in f-string in run_checks.py
-
Hangbin Liu authored
Some distros may enable rp_filter by default. After ns1 change addr to 10.0.2.99 and set default router to 10.0.2.1, while the connected router address is still 10.0.1.1. The router will not reply the arp request from ns1. Fix it by setting the router's veth0 rp_filter to 0. Before the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1 table inet filter { chain prerouting { type filter hook prerouting priority filter; policy accept; ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop } } After the fix: # ./nft_fib.sh PASS: fib expression did not cause unwanted packet drops PASS: fib expression did drop packets for 1.1.1.1 PASS: fib expression did drop packets for 1c3::c01d Fixes: 82944421 ("selftests: netfilter: add fib test case") Signed-off-by: Yi Chen <yiche@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Vladimir Oltean authored
Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus) will free the memory backing the mdio_bus as well. Therefore, the mdio_bus->list element is freed memory, but we continue to iterate through the list of MDIO buses using that list element. To fix this, use the proper list iterator that handles element deletion by keeping a copy of the list element next pointer. Fixes: f53a2ce8 ("net: dsa: mv88e6xxx: don't use devres for mdiobus") Reported-by: Rafael Richter <rafael.richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-10 Dan Carpenter propagates an error in FEC configuration. Jesse fixes TSO offloads of IPIP and SIT frames. Dave adds a dedicated LAG unregister function to resolve a KASAN error and moves auxiliary device re-creation after LAG removal to the service task to avoid issues with RTNL lock. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Avoid RTNL lock when re-creating auxiliary device ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler ice: fix IPIP and SIT TSO offload ice: fix an error code in ice_cfg_phy_fec() ==================== Link: https://lore.kernel.org/r/20220210170515.2609656-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Foster authored
An ongoing workqueue populates the stats buffer. At the same time, a user might query the statistics. While writing to the buffer is mutex-locked, reading from the buffer wasn't. This could lead to buggy reads by ethtool. This patch fixes the former blamed commit, but the bug was introduced in the latter. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Fixes: 1e1caa97 ("ocelot: Clean up stats update deferred work") Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dave Ertman authored
If a call to re-create the auxiliary device happens in a context that has already taken the RTNL lock, then the call flow that recreates auxiliary device can hang if there is another attempt to claim the RTNL lock by the auxiliary driver. To avoid this, any call to re-create auxiliary devices that comes from an source that is holding the RTNL lock (e.g. netdev notifier when interface exits a bond) should execute in a separate thread. To accomplish this, add a flag to the PF that will be evaluated in the service task and dealt with there. Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dave Ertman authored
Currently, the same handler is called for both a NETDEV_BONDING_INFO LAG unlink notification as for a NETDEV_UNREGISTER call. This is causing a problem though, since the netdev_notifier_info passed has a different structure depending on which event is passed. The problem manifests as a call trace from a BUG: KASAN stack-out-of-bounds error. Fix this by creating a handler specific to NETDEV_UNREGISTER that only is passed valid elements in the netdev_notifier_info struct for the NETDEV_UNREGISTER event. Also included is the removal of an unbalanced dev_put on the peer_netdev and related braces. Fixes: 6a8b3572 ("ice: Respond to a NETDEV_UNREGISTER event for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jesse Brandeburg authored
The driver was avoiding offload for IPIP (at least) frames due to parsing the inner header offsets incorrectly when trying to check lengths. This length check works for VXLAN frames but fails on IPIP frames because skb_transport_offset points to the inner header in IPIP frames, which meant the subtraction of transport_header from inner_network_header returns a negative value (-20). With the code before this patch, everything continued to work, but GSO was being used to segment, causing throughputs of 1.5Gb/s per thread. After this patch, throughput is more like 10Gb/s per thread for IPIP traffic. Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dan Carpenter authored
Propagate the error code from ice_get_link_default_override() instead of returning success. Fixes: ea78ce4d ("ice: add link lenient and default override support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Pablo Neira Ayuso authored
Otherwise, this test does not find the sysctl entry in place: sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory iperf3: error - unable to send control message: Bad file descriptor FAIL: iperf3 returned an error Fixes: 7152303c ("selftests: netfilter: add synproxy test") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Disable the IPv4 hooks if the IPv6 hooks fail to be registered. Fixes: ad49d86e ("netfilter: nf_tables: Add synproxy support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Victor Erminpour authored
When building with automatic stack variable initialization, GCC 12 complains about variables defined outside of switch case statements. Move the variable outside the switch, which silences the warning: ./net/mpls/af_mpls.c:1624:21: error: statement will never be executed [-Werror=switch-unreachable] 1624 | int err; | ^~~ Signed-off-by: Victor Erminpour <victor.erminpour@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert-Ionut Alexa authored
The netdev should be unregistered before we are disconnecting from the MAC/PHY so that the dev_close callback is called and the PHY and the phylink workqueues are actually stopped before we are disconnecting and destroying the phylink instance. Fixes: 71947923 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Rix authored
Remove the second 'to'. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marc St-Amand authored
Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fix from Thomas Bogendoerfer: "Device tree fix for Ingenic CI20" * tag 'mips-fixes-5.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: DTS: CI20: fix how ddc power is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/auditLinus Torvalds authored
Pull audit fix from Paul Moore: "Another audit fix, this time a single rather small but important fix for an oops/page-fault caused by improperly accessing userspace memory" * tag 'audit-pr-20220209' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: don't deref the syscall args when checking the openat2 open_how::flags
-
Jon Maloy authored
The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435 Reported-by: Samuel Page <samuel.page@appgate.com> Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 35c55c98 ("tipc: add neighbor monitoring framework") Signed-off-by: Jon Maloy <jmaloy@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Samuel Page <samuel.page@appgate.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Berg authored
If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. Cc: stable@vger.kernel.org Reported-by: Stefan Agner <stefan@agner.ch> Reported-by: Wolfgang Walter <linux@stwm.de> Reported-by: Jason Self <jason@bluehome.net> Reported-by: Dominik Behr <dominik@dominikbehr.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: ab07506b ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for 5.17 Patch 1 fixes a MPTCP selftest bug that combined the results of two separate tests in the test output. Patch 2 fixes a problem where advertised IPv6 addresses were not actually available for incoming MP_JOIN requests. ==================== Link: https://lore.kernel.org/r/20220210012508.226880-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kishen Maloor authored
This change updates mptcp_pm_nl_create_listen_socket() to create listening sockets bound to IPv6 addresses (where IPv6 is supported). Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Acked-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
This function also writes the name of the test with its ID, making clear a new test has been executed. Without that, the ADD_ADDR results from this test was appended at the end of the previous test causing confusions. Especially when the second test was failing, we had: 17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] add[fail] got 2 ADD_ADDR[s] expected 3 In fact, this 17th test was OK but not the 18th one. Now we have: 17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3 - synack[fail] got 2 JOIN[s] synack expected - ack[fail] got 2 JOIN[s] ack expected 3 add[fail] got 2 ADD_ADDR[s] expected 3 Fixes: 33c563ad ("selftests: mptcp: add_addr and echo race test") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Slark Xiao authored
Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 09 Feb, 2022 11 commits
-
-
Paul Moore authored
As reported by Jeff, dereferencing the openat2 syscall argument in audit_match_perm() to obtain the open_how::flags can result in an oops/page-fault. This patch fixes this by using the open_how struct that we store in the audit_context with audit_openat2_how(). Independent of this patch, Richard Guy Briggs posted a similar patch to the audit mailing list roughly 40 minutes after this patch was posted. Cc: stable@vger.kernel.org Fixes: 1c30e3af ("audit: add support for the openat2 syscall") Reported-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull more nfsd fixes from Chuck Lever: "Ensure that NFS clients cannot send file size or offset values that can cause the NFS server to crash or to return incorrect or surprising results. In particular, fix how the NFS server handles values larger than OFFSET_MAX" * tag 'nfsd-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Deprecate NFS_OFFSET_MAX NFSD: Fix offset type in I/O trace points NFSD: COMMIT operations must not return NFS?ERR_INVAL NFSD: Clamp WRITE offsets NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes NFSD: Fix ia_size underflow NFSD: Fix the behavior of READ near OFFSET_MAX
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix two regressions: - Potential boot failure due to missing cryptomgr on initramfs - Stack overflow in octeontx2" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Move cryptomgr soft dependency into algapi crypto: octeontx2 - Avoid stack variable overflow
-
Domenico Andreoli authored
Commit 3ba442d5 ("fs: move binfmt_misc sysctl to its own file") did not go unnoticed, binfmt-support stopped to work on my Debian system since v5.17-rc2 (did not check with -rc1). The existance of the /proc/sys/fs/binfmt_misc is a precondition for attempting to mount the binfmt_misc fs, which in turn triggers the autoload of the binfmt_misc module. Without it, no module is loaded and no binfmt is available at boot. Building as built-in or manually loading the module and mounting the fs works fine, it's therefore only a matter of interaction with user-space. I could try to improve the Debian systemd configuration but I can't say anything about the other distributions. This patch restores a working system right after boot. Fixes: 3ba442d5 ("fs: move binfmt_misc sysctl to its own file") Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Pull s390 kvm fix from Christian Borntraeger: "Add missing check for the MEMOP ioctl The SIDA MEMOPs must only be used for secure guests, otherwise userspace can do unwanted memory accesses" * tag 'kvm-s390-kernel-access' from emailed bundle: KVM: s390: Return error on SIDA memop on normal guest
-
Chuck Lever authored
NFS_OFFSET_MAX was introduced way back in Linux v2.3.y before there was a kernel-wide OFFSET_MAX value. As a clean up, replace the last few uses of it with its generic equivalent, and get rid of it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
NFSv3 and NFSv4 use u64 offset values on the wire. Record these values verbatim without the implicit type case to loff_t. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
Since, well, forever, the Linux NFS server's nfsd_commit() function has returned nfserr_inval when the passed-in byte range arguments were non-sensical. However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests are permitted to return only the following non-zero status codes: NFS3ERR_IO NFS3ERR_STALE NFS3ERR_BADHANDLE NFS3ERR_SERVERFAULT NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL is not listed in the COMMIT row of Table 6 in RFC 8881. RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not specify when it can or should be used. Instead of dropping or failing a COMMIT request in a byte range that is not supported, turn it into a valid request by treating one or both arguments as zero. Offset zero means start-of-file, count zero means until-end-of-file, so we only ever extend the commit range. NFS servers are always allowed to commit more and sooner than requested. The range check is no longer bounded by NFS_OFFSET_MAX, but rather by the value that is returned in the maxfilesize field of the NFSv3 FSINFO procedure or the NFSv4 maxfilesize file attribute. Note that this change results in a new pynfs failure: CMT4 st_commit.testCommitOverflow : RUNNING CMT4 st_commit.testCommitOverflow : FAILURE COMMIT with offset + count overflow should return NFS4ERR_INVAL, instead got NFS4_OK IMO the test is not correct as written: RFC 8881 does not allow the COMMIT operation to return NFS4ERR_INVAL. Reported-by: Dan Aloni <dan.aloni@vastdata.com> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Bruce Fields <bfields@fieldses.org>
-
Chuck Lever authored
Ensure that a client cannot specify a WRITE range that falls in a byte range outside what the kernel's internal types (such as loff_t, which is signed) can represent. The kiocb iterators, invoked in nfsd_vfs_write(), should properly limit write operations to within the underlying file system's s_maxbytes. Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
iattr::ia_size is a loff_t, so these NFSv3 procedures must be careful to deal with incoming client size values that are larger than s64_max without corrupting the value. Silently capping the value results in storing a different value than the client passed in which is unexpected behavior, so remove the min_t() check in decode_sattr3(). Note that RFC 1813 permits only the WRITE procedure to return NFS3ERR_FBIG. We believe that NFSv3 reference implementations also return NFS3ERR_FBIG when ia_size is too large. Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and NFSv4 both define file size as an unsigned 64-bit type. Thus there is a range of valid file size values an NFS client can send that is already larger than Linux can handle. Currently decode_fattr4() dumps a full u64 value into ia_size. If that value happens to be larger than S64_MAX, then ia_size underflows. I'm about to fix up the NFSv3 behavior as well, so let's catch the underflow in the common code path: nfsd_setattr(). Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-