- 09 Dec, 2015 10 commits
-
-
Eric Dumazet authored
commit d69bbf88 upstream. Only cpu seeing dst refcount going to 0 can safely dereference dst->flags. Otherwise an other cpu might already have freed the dst. Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst") Reported-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Eric Dumazet authored
commit 8fa677d2 upstream. Under low memory conditions, tcp_sk_init() and icmp_sk_init() can both iterate on all possible cpus and call inet_ctl_sock_destroy(), with eventual NULL pointer. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Francesco Ruggeri authored
commit 30f7ea1c upstream. There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
-
Eric Dumazet authored
commit 4ece9009 upstream. sit0 device allocates its percpu storage twice : - One time in ipip6_tunnel_init() - One time in ipip6_fb_tunnel_init() Thus we leak 48 bytes per possible cpu per network namespace dismantle. ipip6_fb_tunnel_init() can be much simpler and does not return an error, and should be called after register_netdev() Note that ipip6_tunnel_clone_6rd() also needs to be called after register_netdev() (calling ipip6_tunnel_init()) Fixes: ebe084aa ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by:
-
Bjørn Mork authored
commit 70910791 upstream. The lt4112 is a HP branded Huawei me906e modem. Like other Huawei modems, it does not have a fixed interface to function mapping. Instead it uses a Huawei specific scheme: functions are mapped by subclass and protocol. However, the HP vendor ID is used for modems from many different manufacturers using different schemes, so we cannot apply a generic vendor rule like we do for the Huawei vendor ID. Replace the previous lt4112 entry pointing to an arbitrary interface number with a device specific subclass + protocol match. Reported-and-tested-by:
Muri Nicanor <muri+libqmi@immerda.ch> Tested-by:
Martin Hauke <mardnh@gmx.de> Fixes: bb2bdeb8 ("qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David Ward authored
commit a8079092 upstream. This is an HP-branded Sierra Wireless EM7355: https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2Signed-off-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
Ani Sinha authored
commit 44f49dd8 upstream. Fixes the following kernel BUG : BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758 caller is __this_cpu_preempt_check+0x13/0x15 CPU: 0 PID: 2758 Comm: bash Tainted: P O 3.18.19 #2 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8 Call Trace: [<ffffffff81482b2a>] dump_stack+0x52/0x80 [<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1 [<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15 [<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c [<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e [<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810e6974>] ? pollwake+0x4d/0x51 [<ffffffff81058ac0>] ? default_wake_function+0x0/0xf [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810613d9>] ? __wake_up_common+0x45/0x77 [<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32 [<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53 [<ffffffff8139a519>] ? sock_def_readable+0x71/0x75 [<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55 [<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41 [<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86 [<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d [<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b [<ffffffff810d5738>] ? new_sync_read+0x82/0xaa [<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99 [<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32 [<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f [<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf [<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3 [<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e Signed-off-by:
Ani Sinha <ani@arista.com> Acked-by:
-
Phil Reid authored
commit e6dbe1eb upstream. priv->hwts_*_en indicate if timestamping is enabled/disabled at run time. But priv->dma_cap.time_stamp and priv->dma_cap.atime_stamp indicates HW is support for PTPv1/PTPv2. Signed-off-by:
Phil Reid <preid@electromag.com.au> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Sowmini Varadhan authored
commit 8ce675ff upstream. Either of pskb_pull() or pskb_trim() may fail under low memory conditions. If rds_tcp_data_recv() ignores such failures, the application will receive corrupted data because the skb has not been correctly carved to the RDS datagram size. Avoid this by handling pskb_pull/pskb_trim failure in the same manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and retry via the deferred call to rds_send_worker() that gets set up on ENOMEM from rds_tcp_read_sock() Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Jason Wang authored
commit f23d538b upstream. We don't have fraglist support in TAP_FEATURES. This will lead software segmentation of gro skb with frag list. Fixes by having frag list support in TAP_FEATURES. With this patch single session of netperf receiving were restored from about 5Gb/s to about 12Gb/s on mlx4. Fixes a567dd62 ("macvtap: simplify usage of tap_features") Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
- 18 Nov, 2015 2 commits
-
-
Dan Carpenter authored
commit 50010c20 upstream. This is decrementing the pointer, instead of the value stored in the pointer. KASan detects it as an out of bounds reference. Reported-by:
"Berry Cheng 程君(成淼)" <chengmiao.cj@alibaba-inc.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 16 Nov, 2015 28 commits
-
-
Konstantin Khlebnikov authored
commit fe32d3cd upstream. These functions check should_resched() before unlocking spinlock/bh-enable: preempt_count always non-zero => should_resched() always returns false. cond_resched_lock() worked iff spin_needbreak is set. This patch adds argument "preempt_offset" to should_resched(). preempt_count offset constants for that: PREEMPT_DISABLE_OFFSET - offset after preempt_disable() PREEMPT_LOCK_OFFSET - offset after spin_lock() SOFTIRQ_DISABLE_OFFSET - offset after local_bh_distable() SOFTIRQ_LOCK_OFFSET - offset after spin_lock_bh() Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: bdb43806 ("sched: Extract the basic add/sub preempt_count modifiers") Link: http://lkml.kernel.org/r/20150715095204.12246.98268.stgit@buzzSigned-off-by:
Ingo Molnar <mingo@kernel.org> [ luis: backported to 3.16: - some of the changes done in preempt_mask.h instead of preempt.h - adjusted context ] Signed-off-by:
-
Frederic Weisbecker authored
commit 90b62b51 upstream. "CHECK" suggests it's only used as a comparison mask. But now it's used further as a config-conditional preempt disabler offset. Lets disambiguate this name. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
David S. Miller authored
commit 1d20a160 upstream. drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’: drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] This is because the msg[] member of struct efx_loopback_payload is marked as 'const'. Remove that. Signed-off-by:
-
Lad, Prabhakar authored
commit 31f50e48 upstream. This patch fixes following build warning: In file included from include/linux/printk.h:261:0, from include/linux/kernel.h:13, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/power/bq24190_charger.c:11: drivers/power/bq24190_charger.c: In function ‘bq24190_irq_handler_thread’: include/linux/dynamic_debug.h:86:20: warning: ‘ss_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^ drivers/power/bq24190_charger.c:1211:5: note: ‘ss_reg’ was declared here u8 ss_reg, f_reg; ^ In file included from include/linux/printk.h:261:0, from include/linux/kernel.h:13, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/power/bq24190_charger.c:11: include/linux/dynamic_debug.h:86:20: warning: ‘f_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^ drivers/power/bq24190_charger.c:1211:13: note: ‘f_reg’ was declared here u8 ss_reg, f_reg; Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Salva Peiró authored
commit 4b618433 upstream. The dgnc_mgmt_ioctl() code fails to initialize the 16 _reserved bytes of struct digi_dinfo after the ->dinfo_nboards member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
Salva Peiró <speirofr@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Moritz Mühlenhoff <jmm@inutil.org> Signed-off-by:
-
Ben Hutchings authored
commit 4ab42d78 upstream. Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by:
郭永刚 <guoyonggang@360.cn> References: http://article.gmane.org/gmane.comp.security.oss.general/17908Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit 0baa57d8 upstream. Compile-tested only. Signed-off-by:
-
Soeren Grunewald authored
commit 899f0c1c upstream. The internal clock of the master chip, which is usually 125MHz, is only half (62.5MHz) for the slave chips. So we have to adjust the uartclk for all the slave ports. Therefor we add a new function to determine if a slave chip is present and update pci_xr17v35x_setup accordingly. Signed-off-by:
Soeren Grunewald <soeren.grunewald@desy.de> Signed-off-by:
-
Soeren Grunewald authored
commit be32c0cf upstream. The Exar XR17V358 can also be combined with a XR17V354 chip to act as a single 12 port chip. This works the same way as the combining two XR17V358 chips. But the reported device id then is 0x4358. Signed-off-by:
-
Soeren Grunewald authored
commit 96a5d18b upstream. The Exar XR17V358 chip usually provides only 8 ports. But two chips can be combined to act as a single 16 port chip. Therefor one chip is configured as master the second as slave by connecting the mode pin to VCC (master) or GND (slave). Then the master chip is reporting a different device-id depending on whether a slave is detected or not. The UARTs 8-15 are addressed from 0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to address all 16 ports as before. See: https://www.exar.com/common/content/document.ashx?id=1587 page 11 Signed-off-by:
-
Carol L Soto authored
commit c02b0501 upstream. When doing memcpy/memset of EQEs, we should use sizeof struct mlx4_eqe as the base size and not caps.eqe_size which could be bigger. If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt data in the master context. When using a 64 byte stride, the memcpy copied over 63 bytes to the slave_eq structure. This resulted in copying over the entire eqe of interest, including its ownership bit -- and also 31 bytes of garbage into the next WQE in the slave EQ -- which did NOT include the ownership bit (and therefore had no impact). However, once the stride is increased to 128, we are overwriting the ownership bits of *three* eqes in the slave_eq struct. This results in an incorrect ownership bit for those eqes, which causes the eq to seem to be full. The issue therefore surfaced only once 128-byte EQEs started being used in SRIOV and (overarchitectures that have 128/256 byte cache-lines such as PPC) - e.g after commit 77507aa2 "net/mlx4_core: Enable CQE/EQE stride support". Fixes: 08ff3235 ('mlx4: 64-byte CQE/EQE support') Signed-off-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
commit 7e3b6e74 upstream. gre_gso_segment() chokes if SIT frames were aggregated by GRO engine. Fixes: 61c1db7f ("ipv6: sit: add GSO/TSO support") Signed-off-by:
-
Guillaume Nault authored
commit 1acea4f6 upstream. We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev. PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies (po->pppoe_dev != NULL). Since we're releasing a PPPoE socket, we want to release the pppoe_dev if it exists and reset sk_state to PPPOX_DEAD, no matter the previous value of sk_state. So we can just check for po->pppoe_dev and avoid any assumption on sk->sk_state. Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Herbert Xu authored
commit 93efac3f upstream. The IPv6 IPsec pre-encap path performs fragmentation for tunnel-mode packets. That is, we perform fragmentation pre-encap rather than post-encap. A check was added later to ensure that proper MTU information is passed back for locally generated traffic. Unfortunately this check was performed on all IPsec packets, including transport-mode packets. What's more, the check failed to take GSO into account. The end result is that transport-mode GSO packets get dropped at the check. This patch fixes it by moving the tunnel mode check forward as well as adding the GSO check. Fixes: dd767856 ("xfrm6: Don't call icmpv6_send on local error") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
NeilBrown authored
commit d01552a7 upstream. This reverts commit 7eb41885. This commit is poorly justified, I can find not discusison in email, and it clearly causes a problem. If a device which is being recovered fails and is subsequently re-added to an array, there could easily have been changes to the array *before* the point where the recovery was up to. So the recovery must start again from the beginning. If a spare is being recovered and fails, then when it is re-added we really should do a bitmap-based recovery up to the recovery-offset, and then a full recovery from there. Before this reversion, we only did the "full recovery from there" which is not corect. After this reversion with will do a full recovery from the start, which is safer but not ideal. It will be left to a future patch to arrange the two different styles of recovery. Reported-and-tested-by:
Nate Dailey <nate.dailey@stratus.com> Signed-off-by:
NeilBrown <neilb@suse.com> Fixes: 7eb41885 ("md: allow a partially recovered device to be hot-added to an array.") Signed-off-by:
-
Roman Gushchin authored
commit b8a9d66d upstream. After commit 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by:
-
Ronny Hegewald authored
commit bae818ee upstream. rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Signed-off-by:
Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> [idryomov@gmail.com: backport to 3.9-3.17: context] Signed-off-by:
-
Alex Deucher authored
commit ae93580e upstream. If driver backlight control is disabled, either by driver parameter or default per-asic setting, revert to the old behavior. Fixes a regression in commit: 4281f46eReviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 4cee6a90 upstream. So that the bl encoder will be null if the GPU does not control the backlight. Reviewed-by:
-
Michel Dänzer authored
commit 4281f46e upstream. Instead of only enabling the backlight (which seems to set it to max brightness), just re-set the current backlight level, which also takes care of enabling the backlight if necessary. Only the radeon_atom_encoder_dpms_dig part tested on a Kaveri laptop, the radeon_atom_encoder_dpms_avivo part is only compile tested. Signed-off-by:
-
Will Deacon authored
commit 9702970c upstream. This reverts commit e306dfd0. With this patch applied, we were the only architecture making this sort of adjustment to the PC calculation in the unwinder. This causes problems for ftrace, where the PC values are matched against the contents of the stack frames in the callchain and fail to match any records after the address adjustment. Whilst there has been some effort to change ftrace to workaround this, those patches are not yet ready for mainline and, since we're the odd architecture in this regard, let's just step in line with other architectures (like arch/arm/) for now. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Dāvis Mosāns authored
commit 22805217 upstream. When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays NULL but it's later used in mvs_abort_task as slot which is passed to mvs_slot_task_free causing NULL pointer dereference. Just return from mvs_slot_task_free when passed with NULL slot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891Signed-off-by:
Dāvis Mosāns <davispuh@gmail.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Alex Deucher authored
commit 49abb266 upstream. Fixes a harmless error message caused by: 51a4726bSigned-off-by:
-
Hezi Shahmoon authored
commit 0729a049 upstream. Commit 00d8689b ("i2c: mv64xxx: rework offload support to fix several problems") completely reworked the offload support, but left a debugging-related "return false" at the beginning of the mv64xxx_i2c_can_offload() function. This has the unfortunate consequence that offloading is in fact never used, which wasn't really the intention. This commit fixes that problem by removing the bogus "return false". Fixes: 00d8689b ("i2c: mv64xxx: rework offload support to fix several problems") Signed-off-by:
Hezi Shahmoon <hezi@marvell.com> [Thomas: reworked commit log and title.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Joerg Roedel authored
commit cbf3ccd0 upstream. During device assignment/deassignment the flags in the DTE get lost, which might cause spurious faults, for example when the device tries to access the system management range. Fix this by not clearing the flags with the rest of the DTE. Reported-by:
G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jes Sorensen authored
commit 681ab469 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Jes Sorensen authored
commit 203d27b0 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
-
Herbert Xu authored
commit 3fc89adb upstream. Currently a number of Crypto API operations may fail when a signal occurs. This causes nasty problems as the caller of those operations are often not in a good position to restart the operation. In fact there is currently no need for those operations to be interrupted by user signals at all. All we need is for them to be killable. This patch replaces the relevant calls of signal_pending with fatal_signal_pending, and wait_for_completion_interruptible with wait_for_completion_killable, respectively. Signed-off-by:
-
