Skip to content

L
linux
Switch branch/tag
  1. 12 Jun, 2021 9 commits
  3. 11 Jun, 2021 17 commits
  5. 10 Jun, 2021 14 commits
    • Pavel Begunkov's avatar
      io_uring: add feature flag for rsrc tags · 9690557e
      Pavel Begunkov authored 
      Add IORING_FEAT_RSRC_TAGS indicating that io_uring supports a bunch of
new IORING_REGISTER operations, in particular
IORING_REGISTER_[FILES[,UPDATE]2,BUFFERS[2,UPDATE]] that support rsrc
tagging, and also indicating implemented dynamic fixed buffer updates.
Signed-off-by: default avatarPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b995d4045b6c6b4ab7510ca124fd25ac2203af7.1623339162.git.asml.silence@gmail.comSigned-off-by: default avatarJens Axboe <axboe@kernel.dk>
      9690557e
    • Pavel Begunkov's avatar
      io_uring: change registration/upd/rsrc tagging ABI · 992da01a
      Pavel Begunkov authored 
      There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.

It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.

Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: default avatarPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.comSigned-off-by: default avatarJens Axboe <axboe@kernel.dk>
      992da01a
    • Eric W. Biederman's avatar
      coredump: Limit what can interrupt coredumps · 06af8679
      Eric W. Biederman authored 
      Olivier Langlois has been struggling with coredumps being incompletely written in
processes using io_uring.

Olivier Langlois <olivier@trillion01.com> writes:
> io_uring is a big user of task_work and any event that io_uring made a
> task waiting for that occurs during the core dump generation will
> generate a TIF_NOTIFY_SIGNAL.
>
> Here are the detailed steps of the problem:
> 1. io_uring calls vfs_poll() to install a task to a file wait queue
>    with io_async_wake() as the wakeup function cb from io_arm_poll_handler()
> 2. wakeup function ends up calling task_work_add() with TWA_SIGNAL
> 3. task_work_add() sets the TIF_NOTIFY_SIGNAL bit by calling
>    set_notify_signal()

The coredump code deliberately supports being interrupted by SIGKILL,
and depends upon prepare_signal to filter out all other signals.   Now
that signal_pending includes wake ups for TIF_NOTIFY_SIGNAL this hack
in dump_emitted by the coredump code no longer works.

Make the coredump code more robust by explicitly testing for all of
the wakeup conditions the coredump code supports.  This prevents
new wakeup conditions from breaking the coredump code, as well
as fixing the current issue.

The filesystem code that the coredump code uses already limits
itself to only aborting on fatal_signal_pending.  So it should
not develop surprising wake-up reasons either.

v2: Don't remove the now unnecessary code in prepare_signal.

Cc: stable@vger.kernel.org
Fixes: 12db8b69 ("entry: Add support for TIF_NOTIFY_SIGNAL")
Reported-by: default avatarOlivier Langlois <olivier@trillion01.com>
Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      06af8679
    • Linus Torvalds's avatar
      Merge branch 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · f09eacca
      Linus Torvalds authored 
      Pull cgroup fix from Tejun Heo:
 "This is a high priority but low risk fix for a cgroup1 bug where
  rename(2) can change a cgroup's name to something which can break
  parsing of /proc/PID/cgroup"

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup1: don't allow '\n' in renaming
      f09eacca
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma · 29a877d5
      Linus Torvalds authored 
      Pull rdma fixes from Jason Gunthorpe:
 "A mixture of small bug fixes and a small security issue:

   - WARN_ON when IPoIB is automatically moved between namespaces

   - Long standing bug where mlx5 would use the wrong page for the
     doorbell recovery memory if fork is used

   - Security fix for mlx4 that disables the timestamp feature

   - Several crashers for mlx5

   - Plug a recent mlx5 memory leak for the sig_mr"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Fix initializing CQ fragments buffer
  RDMA/mlx5: Delete right entry from MR signature database
  RDMA: Verify port when creating flow rule
  RDMA/mlx5: Block FDB rules when not in switchdev mode
  RDMA/mlx4: Do not map the core_clock page to user space unless enabled
  RDMA/mlx5: Use different doorbell memory for different processes
  RDMA/ipoib: Fix warning caused by destroying non-initial netns
      29a877d5
    • Robert Marko's avatar
      hwmon: (tps23861) correct shunt LSB values · e13d1127
      Robert Marko authored 
      Current shunt LSB values got reversed during in the
original driver commit.

So, correct the current shunt LSB values according to
the datasheet.

This caused reading slightly skewed current values.

Fixes: fff7b8ab ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: default avatarRobert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210609220728.499879-3-robert.marko@sartura.hrSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      e13d1127
    • Robert Marko's avatar
      hwmon: (tps23861) set current shunt value · b325d352
      Robert Marko authored 
      TPS23861 has a configuration bit for setting of the
current shunt value used on the board.
Its bit 0 of the General Mask 1 register.

According to the datasheet bit values are:
0 for 255 mOhm (Default)
1 for 250 mOhm

So, configure the bit before registering the hwmon
device according to the value passed in the DTS or
default one if none is passed.

This caused potentially reading slightly skewed values
due to max current value being 1.02A when 250mOhm shunt
is used instead of 1.0A when 255mOhm is used.

Fixes: fff7b8ab ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: default avatarRobert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210609220728.499879-2-robert.marko@sartura.hrSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      b325d352
    • Robert Marko's avatar
      hwmon: (tps23861) define regmap max register · fb8543fb
      Robert Marko authored 
      Define the max register address the device supports.
This allows reading the whole register space via
regmap debugfs, without it only register 0x0 is visible.

This was forgotten in the original driver commit.

Fixes: fff7b8ab ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: default avatarRobert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210609220728.499879-1-robert.marko@sartura.hrSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      fb8543fb
    • Takashi Iwai's avatar
      ALSA: seq: Fix race of snd_seq_timer_open() · 83e197a8
      Takashi Iwai authored 
      The timer instance per queue is exclusive, and snd_seq_timer_open()
should have managed the concurrent accesses.  It looks as if it's
checking the already existing timer instance at the beginning, but
it's not right, because there is no protection, hence any later
concurrent call of snd_seq_timer_open() may override the timer
instance easily.  This may result in UAF, as the leftover timer
instance can keep running while the queue itself gets closed, as
spotted by syzkaller recently.

For avoiding the race, add a proper check at the assignment of
tmr->timeri again, and return -EBUSY if it's been already registered.

Reported-by: syzbot+ddc1260a83ed1cbf6fb5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000dce34f05c42f110c@google.com
Link: https://lore.kernel.org/r/20210610152059.24633-1-tiwai@suse.deSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      83e197a8
    • Stephen Boyd's avatar
      drm/msm/dsi: Stash away calculated vco frequency on recalc · 170b7635
      Stephen Boyd authored 
      A problem was reported on CoachZ devices where the display wouldn't come
up, or it would be distorted. It turns out that the PLL code here wasn't
getting called once dsi_pll_10nm_vco_recalc_rate() started returning the
same exact frequency, down to the Hz, that the bootloader was setting
instead of 0 when the clk was registered with the clk framework.

After commit 001d8dc3 ("drm/msm/dsi: remove temp data from global
pll structure") we use a hardcoded value for the parent clk frequency,
i.e.  VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS,
instead of getting it from the config structure. This combination of
changes to the recalc function allows us to properly calculate the
frequency of the PLL regardless of whether or not the PLL has been
clk_prepare()d or clk_set_rate()d. That's a good improvement.

Unfortunately, this means that now we won't call down into the PLL clk
driver when we call clk_set_rate() because the frequency calculated in
the framework matches the frequency that is set in hardware. If the rate
is the same as what we want it should be OK to not call the set_rate PLL
op. The real problem is that the prepare op in this driver uses a
private struct member to stash away the vco frequency so that it can
call the set_rate op directly during prepare. Once the set_rate op is
never called because recalc_rate told us the rate is the same, we don't
set this private struct member before the prepare op runs, so we try to
call the set_rate function directly with a frequency of 0. This
effectively kills the PLL and configures it for a rate that won't work.
Calling set_rate from prepare is really quite bad and will confuse any
downstream clks about what the rate actually is of their parent. Fixing
that will be a rather large change though so we leave that to later.

For now, let's stash away the rate we calculate during recalc so that
the prepare op knows what frequency to set, instead of 0. This way
things keep working and the display can enable the PLL properly. In the
future, we should remove that code from the prepare op so that it
doesn't even try to call the set rate function.

Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Fixes: 001d8dc3 ("drm/msm/dsi: remove temp data from global pll structure")
Signed-off-by: default avatarStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.orgSigned-off-by: default avatarRob Clark <robdclark@chromium.org>
      170b7635
    • Alexander Kuznetsov's avatar
      cgroup1: don't allow '\n' in renaming · b7e24eb1
      Alexander Kuznetsov authored 
      cgroup_mkdir() have restriction on newline usage in names:
$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument

But in cgroup1_rename() such check is missed.
This allows us to make /proc/<pid>/cgroup unparsable:
$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/
Signed-off-by: default avatarAlexander Kuznetsov <wwfq@yandex-team.ru>
Reported-by: default avatarAndrey Krasichkov <buglloc@yandex-team.ru>
Acked-by: default avatarDmitry Yakunin <zeil@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      b7e24eb1
    • Alaa Hleihel's avatar
      IB/mlx5: Fix initializing CQ fragments buffer · 2ba0aa2f
      Alaa Hleihel authored 
      The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.

However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.

 [exception RIP: init_cq_frag_buf+103]
  [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib]
  [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core]
  [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt]
  [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt]
  [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt]
  [ffff9f799ddcbec8] kthread at ffffffffa66c5da1
  [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd

Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that
takes the correct source buffer as a parameter.

Fixes: 388ca8be ("IB/mlx5: Implement fragmented completion queue (CQ)")
Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.comSigned-off-by: default avatarAlaa Hleihel <alaa@nvidia.com>
Signed-off-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarJason Gunthorpe <jgg@nvidia.com>
      2ba0aa2f
    • Aharon Landau's avatar
      RDMA/mlx5: Delete right entry from MR signature database · 6466f03f
      Aharon Landau authored 
      The value mr->sig is stored in the entry upon mr allocation, however, ibmr
is wrongly entered here as "old", therefore, xa_cmpxchg() does not replace
the entry with NULL, which leads to the following trace:

 WARNING: CPU: 28 PID: 2078 at drivers/infiniband/hw/mlx5/main.c:3643 mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib]
 Modules linked in: nvme_rdma nvme_fabrics nvme_core 8021q garp mrp bonding bridge stp llc rfkill rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_tad
 CPU: 28 PID: 2078 Comm: reboot Tainted: G               X --------- ---  5.13.0-0.rc2.19.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.9.1 12/07/2018
 RIP: 0010:mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib]
 Code: 8d bb 70 1f 00 00 be 00 01 00 00 e8 9d 94 ce da 48 3d 00 01 00 00 75 02 5b c3 0f 0b 5b c3 0f 0b 48 83 bb b0 20 00 00 00 74 d5 <0f> 0b eb d1 4
 RSP: 0018:ffffa8db06d33c90 EFLAGS: 00010282
 RAX: 0000000000000000 RBX: ffff97f890a44000 RCX: ffff97f900ec0160
 RDX: 0000000000000000 RSI: 0000000080080001 RDI: ffff97f890a44000
 RBP: ffffffffc0c189b8 R08: 0000000000000001 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000300 R12: ffff97f890a44000
 R13: ffffffffc0c36030 R14: 00000000fee1dead R15: 0000000000000000
 FS:  00007f0d5a8a3b40(0000) GS:ffff98077fb80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000555acbf4f450 CR3: 00000002a6f56002 CR4: 00000000001706e0
 Call Trace:
  mlx5r_remove+0x39/0x60 [mlx5_ib]
  auxiliary_bus_remove+0x1b/0x30
  __device_release_driver+0x17a/0x230
  device_release_driver+0x24/0x30
  bus_remove_device+0xdb/0x140
  device_del+0x18b/0x3e0
  mlx5_detach_device+0x59/0x90 [mlx5_core]
  mlx5_unload_one+0x22/0x60 [mlx5_core]
  shutdown+0x31/0x3a [mlx5_core]
  pci_device_shutdown+0x34/0x60
  device_shutdown+0x15b/0x1c0
  __do_sys_reboot.cold+0x2f/0x5b
  ? vfs_writev+0xc7/0x140
  ? handle_mm_fault+0xc5/0x290
  ? do_writev+0x6b/0x110
  do_syscall_64+0x40/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: e6fb246c ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Link: https://lore.kernel.org/r/f3f585ea0db59c2a78f94f65eedeafc5a2374993.1623309971.git.leonro@nvidia.comSigned-off-by: default avatarAharon Landau <aharonl@nvidia.com>
Signed-off-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarJason Gunthorpe <jgg@nvidia.com>
      6466f03f
    • Maor Gottlieb's avatar
      RDMA: Verify port when creating flow rule · 2adcb4c5
      Maor Gottlieb authored 
      Validate port value provided by the user and with that remove no longer
needed validation by the driver.  The missing check in the mlx5_ib driver
could cause to the below oops.

Call trace:
  _create_flow_rule+0x2d4/0xf28 [mlx5_ib]
  mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib]
  ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs]
  ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs]
  ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs]
  ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs]
  do_vfs_ioctl+0xd0/0xaf0
  ksys_ioctl+0x84/0xb4
  __arm64_sys_ioctl+0x28/0xc4
  el0_svc_common.constprop.3+0xa4/0x254
  el0_svc_handler+0x84/0xa0
  el0_svc+0x10/0x26c
 Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a)

Fixes: 436f2ad0 ("IB/core: Export ib_create/destroy_flow through uverbs")
Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.comReviewed-by: default avatarMark Bloch <markb@mellanox.com>
Signed-off-by: default avatarMaor Gottlieb <maorg@nvidia.com>
Signed-off-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarJason Gunthorpe <jgg@nvidia.com>
      2adcb4c5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7