- 06 Jun, 2024 1 commit
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-06-05 We've added 8 non-merge commits during the last 6 day(s) which contain a total of 9 files changed, 34 insertions(+), 35 deletions(-). The main changes are: 1) Fix a potential use-after-free in bpf_link_free when the link uses dealloc_deferred to free the link object but later still tests for presence of link->ops->dealloc, from Cong Wang. 2) Fix BPF test infra to set the run context for rawtp test_run callback where syzbot reported a crash, from Jiri Olsa. 3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude it for the case of !CONFIG_FPROBE, also from Jiri Olsa. 4) Fix a Coverity static analysis report to not close() a link_fd of -1 in the multi-uprobe feature detector, from Andrii Nakryiko. 5) Revert support for redirect to any xsk socket bound to the same umem as it can result in corrupted ring state which can lead to a crash when flushing rings. A different approach will be pursued for bpf-next to address it safely, from Magnus Karlsson. 6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko. 7) Fix a coccicheck warning in BPF devmap that iterator variable cannot be NULL, from Thorsten Blum. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: Revert "xsk: Document ability to redirect to any socket bound to the same umem" Revert "xsk: Support redirect to any socket bound to the same umem" bpf: Set run context for rawtp test_run callback bpf: Fix a potential use-after-free in bpf_link_free() bpf, devmap: Remove unnecessary if check in for loop libbpf: don't close(-1) in multi-uprobe feature detector bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c ==================== Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 05 Jun, 2024 21 commits
-
-
Karol Kolacinski authored
On failed verification of PTP clock pin, error message prints channel number instead of pin index after "pin", which is incorrect. Fix error message by adding channel number to the message and printing pin number instead of channel number. Fixes: 6092315d ("ptp: introduce programmable pins.") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20240604120555.16643-1-karol.kolacinski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided, taprio_parse_mqprio_opt() must validate it, or userspace can inject arbitrary data to the kernel, the second time taprio_change() is called. First call (with valid attributes) sets dev->num_tc to a non zero value. Second call (with arbitrary mqprio attributes) returns early from taprio_parse_mqprio_opt() and bad things can happen. Fixes: a3d43c0d ("taprio: Add support adding an admin schedule") Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20240604181511.769870-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Aleksandr Mishin authored
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352899f3 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Tariq Toukan says: ==================== mlx5 core fixes 20240603 This small patchset provides two bug fixes from the team to the mlx5 core driver. Series generated against: commit 33700a0c ("net/tcp: Don't consider TCP_CLOSE in TCP_AO_ESTABLISHED") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shay Drory authored
Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- Fixes: 9b98d395 ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Moshe Shemesh authored
In case pci channel becomes offline the driver should not wait for PCI reads during health dump and recovery flow. The driver has timeout for each of these loops trying to read PCI, so it would fail anyway. However, in case of recovery waiting till timeout may cause the pci error_detected() callback fail to meet pci_dpc_recovered() wait timeout. Fixes: b3bd076f ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Wunderlich authored
The mainline MTK ethernet driver suffers long time from rarly but annoying tx queue timeouts. We think that this is caused by fixed dma sizes hardcoded for all SoCs. We suspect this problem arises from a low level of free TX DMADs, the TX Ring alomost full. The transmit timeout is caused by the Tx queue not waking up. The Tx queue stops when the free counter is less than ring->thres, and it will wake up once the free counter is greater than ring->thres. If the CPU is too late to wake up the Tx queues, it may cause a transmit timeout. Therefore, we increased the TX and RX DMADs to improve this error situation. Use the dma-size implementation from SDK in a per SoC manner. In difference to SDK we have no RSS feature yet, so all RX/TX sizes should be raised from 512 to 2048 byte except fqdma on mt7988 to avoid the tx timeout issue. Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet") Suggested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Jaroslav reports Dell's OMSA Systems Management Data Engine expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo() and inet_dump_ifaddr(). We already added a similar fix previously in commit 460b0d33 ("inet: bring NLM_DONE out to a separate recv() again") Instead of modifying all the dump handlers, and making them look different than modern for_each_netdev_dump()-based dump handlers - put the workaround in rtnetlink code. This will also help us move the custom rtnl-locking from af_netlink in the future (in net-next). Note that this change is not touching rtnl_dump_all(). rtnl_dump_all() is different kettle of fish and a potential problem. We now mix families in a single recvmsg(), but NLM_DONE is not coalesced. Tested: ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_addr.yaml \ --dump getaddr --json '{"ifa-family": 2}' ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_link.yaml \ --dump getlink Fixes: 3e41af90 ("rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()") Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/all/CAK8fFZ7MKoFSEzMBDAOjoUt+vTZRRQgLDNXEOfdCCXSoXXKE0g@mail.gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jason Xing says: ==================== tcp/mptcp: count CLOSE-WAIT for CurrEstab Taking CLOSE-WAIT sockets into CurrEstab counters is in accordance with RFC 1213, as suggested by Eric and Neal. v5 Link: https://lore.kernel.org/all/20240531091753.75930-1-kerneljasonxing@gmail.com/ 1. add more detailed comment (Matthieu) v4 Link: https://lore.kernel.org/all/20240530131308.59737-1-kerneljasonxing@gmail.com/ 1. correct the Fixes: tag in patch [2/2]. (Eric) Previous discussion Link: https://lore.kernel.org/all/20240529033104.33882-1-kerneljasonxing@gmail.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Xing authored
Like previous patch does in TCP, we need to adhere to RFC 1213: "tcpCurrEstab OBJECT-TYPE ... The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT." So let's consider CLOSE-WAIT sockets. The logic of counting When we increment the counter? a) Only if we change the state to ESTABLISHED. When we decrement the counter? a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT, say, on the client side, changing from ESTABLISHED to FIN-WAIT-1. b) if the socket leaves CLOSE-WAIT, say, on the server side, changing from CLOSE-WAIT to LAST-ACK. Fixes: d9cd27b8 ("mptcp: add CurrEstab MIB counter support") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Xing authored
According to RFC 1213, we should also take CLOSE-WAIT sockets into consideration: "tcpCurrEstab OBJECT-TYPE ... The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT." After this, CurrEstab counter will display the total number of ESTABLISHED and CLOSE-WAIT sockets. The logic of counting When we increment the counter? a) if we change the state to ESTABLISHED. b) if we change the state from SYN-RECEIVED to CLOSE-WAIT. When we decrement the counter? a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT, say, on the client side, changing from ESTABLISHED to FIN-WAIT-1. b) if the socket leaves CLOSE-WAIT, say, on the server side, changing from CLOSE-WAIT to LAST-ACK. Please note: there are two chances that old state of socket can be changed to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED. So we have to take care of the former case. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
hsr_redbox.sh test need to create bridge for testing. Add the missing config CONFIG_BRIDGE in config file. Fixes: eafbf057 ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Commit f58f45c1 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David Bauer <mail@david-bauer.net> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangyu Hua authored
q->bands will be assigned to qopt->bands to execute subsequent code logic after kmalloc. So the old q->bands should not be used in kmalloc. Otherwise, an out-of-bounds write will occur. Fixes: c2999f7f ("net: sched: multiq: don't call qdisc_put() while holding tree lock") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 Fixes: 8eeed837 ("ionic: Add XDP_TX support") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tristram Ha authored
KSZ8061 needs to write to a MMD register at driver initialization to fix an errata. This worked in 5.0 kernel but not in newer kernels. The issue is the main phylib code no longer resets PHY at the very beginning. Calling phy resuming code later will reset the chip if it is already powered down at the beginning. This wipes out the MMD register write. Solution is to implement a phy resume function for KSZ8061 to take care of this problem. Fixes: 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen Gu authored
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf to sysctl_tcp_wmem[1], since this may overwrite the value set by tcp_sndbuf_expand() in TCP connection establishment. And the other setting sk_{snd|rcv}buf to sysctl value in smc_adjust_sock_bufsizes() can also be omitted since the initialization of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem or ipv4_sysctl_tcp_{w|r}mem[1]. Fixes: 30c3c4a4 ("net/smc: Use correct buffer sizes when switching between TCP and SMC") Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.comSigned-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subbaraya Sundeep authored
PF mcam entries has to be at low priority always so that VF can install longest prefix match rules at higher priority. This was taken care currently but when priority allocation wrt reference entry is requested then entries are allocated from mid-zone instead of low priority zone. Fix this and always allocate entries from low priority zone for PFs. Fixes: 7df5b4b2 ("octeontx2-af: Allocate low priority entries for PF") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Magnus Karlsson authored
This reverts commit 968595a9. Reported-by: Yuval El-Hanany <YuvalE@radware.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com Link: https://lore.kernel.org/bpf/20240604122927.29080-3-magnus.karlsson@gmail.com
-
Magnus Karlsson authored
This reverts commit 2863d665. This patch introduced a potential kernel crash when multiple napi instances redirect to the same AF_XDP socket. By removing the queue_index check, it is possible for multiple napi instances to access the Rx ring at the same time, which will result in a corrupted ring state which can lead to a crash when flushing the rings in __xsk_flush(). This can happen when the linked list of sockets to flush gets corrupted by concurrent accesses. A quick and small fix is not possible, so let us revert this for now. Reported-by: Yuval El-Hanany <YuvalE@radware.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com Link: https://lore.kernel.org/bpf/20240604122927.29080-2-magnus.karlsson@gmail.com
-
Jiri Olsa authored
syzbot reported crash when rawtp program executed through the test_run interface calls bpf_get_attach_cookie helper or any other helper that touches task->bpf_ctx pointer. Setting the run context (task->bpf_ctx pointer) for test_run callback. Fixes: 7adfc6c9 ("bpf: Add bpf_get_attach_cookie() BPF helper to access bpf_cookie value") Reported-by: syzbot+3ab78ff125b7979e45f9@syzkaller.appspotmail.com Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Closes: https://syzkaller.appspot.com/bug?extid=3ab78ff125b7979e45f9 Link: https://lore.kernel.org/bpf/20240604150024.359247-1-jolsa@kernel.org
-
- 04 Jun, 2024 10 commits
-
-
Jakub Kicinski authored
For TLS offload we mark packets with skb->decrypted to make sure they don't escape the host without getting encrypted first. The crypto state lives in the socket, so it may get detached by a call to skb_orphan(). As a safety check - the egress path drops all packets with skb->decrypted and no "crypto-safe" socket. The skb marking was added to sendpage only (and not sendmsg), because tls_device injected data into the TCP stack using sendpage. This special case was missed when sendpage got folded into sendmsg. Fixes: c5c37af6 ("tcp: Convert do_tcp_sendpages() to use MSG_SPLICE_PAGES") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240530232607.82686-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.10-rc3 The first fixes for v6.10. And we have a big one, I suspect the biggest wireless pull request we ever had. There are fixes all over, both in stack and drivers. Likely the most important here are mt76 not working on mt7615 devices, ath11k not being able to connect to 6 GHz networks and rtlwifi suffering from packet loss. But of course there's much more. * tag 'wireless-2024-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (37 commits) wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS wifi: mt76: mt7615: add missing chanctx ops wifi: wilc1000: document SRCU usage instead of SRCU Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section" Revert "wifi: wilc1000: convert list management to RCU" wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan() wifi: mac80211: correctly parse Spatial Reuse Parameter Set element wifi: mac80211: fix Spatial Reuse element size check wifi: iwlwifi: mvm: don't read past the mfuart notifcation wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill wifi: iwlwifi: mvm: check n_ssids before accessing the ssids wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option wifi: iwlwifi: mvm: handle BA session teardown in RF-kill wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd wifi: iwlwifi: mvm: remove stale STA link data during restart wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef wifi: iwlwifi: mvm: set properly mac header wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64 wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup wifi: iwlwifi: mvm: fix a crash on 7265 ... ==================== Link: https://lore.kernel.org/r/20240603115129.9494CC2BD10@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in lib/test_rhashtable.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240531-md-lib-test_rhashtable-v1-1-cd6d4138f1b6@quicinc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Eric Dumazet says: ==================== dst_cache: fix possible races This series is inspired by various undisclosed syzbot reports hinting at corruptions in dst_cache structures. It seems at least four users of dst_cache are racy against BH reentrancy. Last patch is adding a DEBUG_NET check to catch future misuses. ==================== Link: https://lore.kernel.org/r/20240531132636.2637995-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
After fixing four different bugs involving dst_cache users, it might be worth adding a check about BH being blocked by dst_cache callers. DEBUG_NET_WARN_ON_ONCE(!in_softirq()); It is not fatal, if we missed valid case where no BH deadlock is to be feared, we might change this. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240531132636.2637995-6-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
As explained in commit 13788174 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable(). Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
As explained in commit 13788174 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. Disabling preemption in seg6_output_core() is not good enough, because seg6_output_core() is called from process context, lwtunnel_output() only uses rcu_read_lock(). We might be interrupted by a softirq, re-enter seg6_output_core() and corrupt dst_cache data structures. Fix the race by using local_bh_disable() instead of preempt_disable(). Apply a similar change in seg6_input_core(). Fixes: fa79581e ("ipv6: sr: fix several BUGs when preemption is enabled") Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Lebrun <dlebrun@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240531132636.2637995-4-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
As explained in commit 13788174 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. Disabling preemption in rpl_output() is not good enough, because rpl_output() is called from process context, lwtunnel_output() only uses rcu_read_lock(). We might be interrupted by a softirq, re-enter rpl_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable() instead of preempt_disable(). Apply a similar change in rpl_input(). Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Aring <aahringo@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
As explained in commit 13788174 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. Disabling preemption in ioam6_output() is not good enough, because ioam6_output() is called from process context, lwtunnel_output() only uses rcu_read_lock(). We might be interrupted by a softirq, re-enter ioam6_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable() instead of preempt_disable(). Fixes: 8cb3bf8b ("ipv6: ioam: Add support for the ip6ip6 encapsulation") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Justin Iurman <justin.iurman@uliege.be> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240531132636.2637995-2-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthias Stocker authored
When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base, the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset rq->data_ring.desc_size for the data ring that failed, which presumably causes the hypervisor to reference it on packet reception. To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell the hypervisor to disable this feature. [ 95.436876] kernel BUG at net/core/skbuff.c:207! [ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1 [ 95.441558] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018 [ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f [ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50 ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9 ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24 [ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246 [ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f [ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f [ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60 [ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000 [ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0 [ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000 [ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0 [ 95.459791] Call Trace: [ 95.460515] <IRQ> [ 95.461180] ? __die_body.cold+0x19/0x27 [ 95.462150] ? die+0x2e/0x50 [ 95.462976] ? do_trap+0xca/0x110 [ 95.463973] ? do_error_trap+0x6a/0x90 [ 95.464966] ? skb_panic+0x4d/0x4f [ 95.465901] ? exc_invalid_op+0x50/0x70 [ 95.466849] ? skb_panic+0x4d/0x4f [ 95.467718] ? asm_exc_invalid_op+0x1a/0x20 [ 95.468758] ? skb_panic+0x4d/0x4f [ 95.469655] skb_put.cold+0x10/0x10 [ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3] [ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3] [ 95.473185] __napi_poll+0x2b/0x160 [ 95.474145] net_rx_action+0x2c6/0x3b0 [ 95.475115] handle_softirqs+0xe7/0x2a0 [ 95.476122] __irq_exit_rcu+0x97/0xb0 [ 95.477109] common_interrupt+0x85/0xa0 [ 95.478102] </IRQ> [ 95.478846] <TASK> [ 95.479603] asm_common_interrupt+0x26/0x40 [ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20 [ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 [ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246 [ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000 [ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001 [ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3 [ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260 [ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000 [ 95.495035] acpi_safe_halt+0x14/0x20 [ 95.496127] acpi_idle_do_entry+0x2f/0x50 [ 95.497221] acpi_idle_enter+0x7f/0xd0 [ 95.498272] cpuidle_enter_state+0x81/0x420 [ 95.499375] cpuidle_enter+0x2d/0x40 [ 95.500400] do_idle+0x1e5/0x240 [ 95.501385] cpu_startup_entry+0x29/0x30 [ 95.502422] start_secondary+0x11c/0x140 [ 95.503454] common_startup_64+0x13e/0x141 [ 95.504466] </TASK> [ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables vsock_loopback vmw_vsock_virtio_transport_common qrtr vmw_vsock_vmci_transport vsock sunrpc binfmt_misc pktcdvd vmw_balloon pcspkr vmw_vmci i2c_piix4 joydev loop dm_multipath nfnetlink zram crct10dif_pclmul crc32_pclmul vmwgfx crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 sha256_ssse3 vmxnet3 sha1_ssse3 drm_ttm_helper vmw_pvscsi ttm ata_generic pata_acpi serio_raw scsi_dh_rdac scsi_dh_emc scsi_dh_alua ip6_tables ip_tables fuse [ 95.516536] ---[ end trace 0000000000000000 ]--- Fixes: 6f483338 ("net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()") Signed-off-by: Matthias Stocker <mstocker@barracuda.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Ronak Doshi <ronak.doshi@broadcom.com> Link: https://lore.kernel.org/r/20240531103711.101961-1-mstocker@barracuda.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 03 Jun, 2024 3 commits
-
-
Cong Wang authored
After commit 1a80dbcb, bpf_link can be freed by link->ops->dealloc_deferred, but the code still tests and uses link->ops->dealloc afterward, which leads to a use-after-free as reported by syzbot. Actually, one of them should be sufficient, so just call one of them instead of both. Also add a WARN_ON() in case of any problematic implementation. Fixes: 1a80dbcb ("bpf: support deferring bpf_link dealloc to after RCU grace period") Reported-by: syzbot+1989ee16d94720836244@syzkaller.appspotmail.com Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20240602182703.207276-1-xiyou.wangcong@gmail.com
-
Thorsten Blum authored
The iterator variable dst cannot be NULL and the if check can be removed. Remove it and fix the following Coccinelle/coccicheck warning reported by itnull.cocci: ERROR: iterator variable bound on line 762 cannot be NULL Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20240529101900.103913-2-thorsten.blum@toblux.com
-
Tristram Ha authored
When the PHY is powered up after powered down most of the registers are reset, so the PHY setup code needs to be done again. In addition the interrupt register will need to be setup again so that link status indication works again. Fixes: 26dd2974 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Jun, 2024 5 commits
-
-
Dmitry Safonov authored
TCP_CLOSE may or may not have current/rnext keys and should not be considered "established". The fast-path for TCP_CLOSE is SKB_DROP_REASON_TCP_CLOSE. This is what tcp_rcv_state_process() does anyways. Add an early drop path to not spend any time verifying segment signatures for sockets in TCP_CLOSE state. Cc: stable@vger.kernel.org # v6.7 Fixes: 0a3a8090 ("net/tcp: Verify inbound TCP-AO signed segments") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20240529-tcp_ao-sk_state-v1-1-d69b5d323c52@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
DelphineCCChiu authored
Currently NCSI driver will send several NCSI commands back to back without waiting the response of previous NCSI command or timeout in some state when NIC have multi channel. This operation against the single thread manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1) According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe one channel at a time by sending NCSI commands (Clear initial state, Get version ID, Get capabilities...), than repeat this steps until the max number of channels which we got from NCSI command (Get capabilities) has been probed. Fixes: e6f44ed6 ("net/ncsi: Package and channel management") Signed-off-by: DelphineCCChiu <delphine_cc_chiu@wiwynn.com> Link: https://lore.kernel.org/r/20240529065856.825241-1-delphine_cc_chiu@wiwynn.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason Xing authored
John Sperbeck reported that if we turn off CONFIG_RFS_ACCEL, the 'head' is not defined, which will trigger compile error. So I move the 'head' out of the CONFIG_RFS_ACCEL scope. Fixes: 84b6823c ("net: rps: protect last_qtail with rps_input_queue_tail_save() helper") Reported-by: John Sperbeck <jsperbeck@google.com> Closes: https://lore.kernel.org/all/20240529203421.2432481-1-jsperbeck@google.com/Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240530032717.57787-1-kerneljasonxing@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Duoming Zhou authored
The object "ax25_dev" is managed by reference counting. Thus it should not be directly released by kfree(), replace with ax25_dev_put(). Fixes: d01ffb9e ("ax25: add refcount in ax25_dev to avoid UAF bugs") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240530051733.11416-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Lars Kellogg-Stedman authored
When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <TASK> ? show_regs+0x64/0x70 ? __warn+0x83/0x120 ? refcount_warn_saturate+0xb2/0x100 ? report_bug+0x158/0x190 ? prb_read_valid+0x20/0x30 ? handle_bug+0x3e/0x70 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xb2/0x100 ? refcount_warn_saturate+0xb2/0x100 ax25_release+0x2ad/0x360 __sock_release+0x35/0xa0 sock_close+0x19/0x20 [...] On reboot (or any attempt to remove the interface), the kernel gets stuck in an infinite loop: unregister_netdevice: waiting for ax0 to become free. Usage count = 0 This patch corrects these issues by ensuring that we call netdev_hold() and ax25_dev_hold() for new connections in ax25_accept(). This makes the logic leading to ax25_accept() match the logic for ax25_bind(): in both cases we increment the refcount, which is ultimately decremented in ax25_release(). Fixes: 9fd75b66 ("ax25: Fix refcount leaks caused by ax25_cb_del()") Signed-off-by: Lars Kellogg-Stedman <lars@oddbit.com> Tested-by: Duoming Zhou <duoming@zju.edu.cn> Tested-by: Dan Cross <crossd@gmail.com> Tested-by: Chris Maness <christopher.maness@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240529210242.3346844-2-lars@oddbit.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-