dsa_slave_change_mtu() calls dsa_port_mtu_change() twice:
- it sends a cross-chip notifier with the MTU of the CPU port which is
  used to update the DSA links.
- it sends one targeted MTU notifier which is supposed to only match the
  user port on which we are changing the MTU. The "propagate_upstream"
  variable is used here to bypass the cross-chip notifier system from
  switch.c

But due to a mistake, the second, targeted notifier matches not only on
the user port, but also on the DSA link which is a member of the same
switch, if that exists.

And because the DSA links of the entire dst were programmed in a
previous round to the largest_mtu via a "propagate_upstream == true"
notification, then the dsa_port_mtu_change(propagate_upstream == false)
call that is immediately upcoming will break the MTU on the one DSA link
which is chip-wise local to the dp whose MTU is changing right now.

Example given this daisy chain topology:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  cpu  ] [  user ] [  user ] [  dsa  ] [  user ]
[   x   ] [       ] [       ] [   x   ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

ip link set sw0p1 mtu 9000
ip link set sw1p1 mtu 9000 # at this stage, sw0p1 and sw1p1 can talk
                           # to one another using jumbo frames
ip link set sw0p2 mtu 1500 # this programs the sw0p3 DSA link first to
                           # the largest_mtu of 9000, then reprograms it to
                           # 1500 with the "propagate_upstream == false"
                           # notifier, breaking communication between
                           # sw0p1 and sw1p1

To escape from this situation, make the targeted match really match on a
single port - the user port, and rename the "propagate_upstream"
variable to "targeted_match" to clarify the intention and avoid future
issues.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we have a cross-chip topology like this:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  cpu  ] [  user ] [  user ] [  dsa  ] [  user ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]

and we issue the following commands:

1. ip link set sw0p1 mtu 1700
2. ip link set sw1p1 mtu 1600

we notice the following happening:

Command 1. emits a non-targeted MTU notifier for the CPU port (sw0p0)
with the largest_mtu calculated across switch 0, of 1700. This matches
sw0p0, sw0p3 and sw1p4 (all CPU ports and DSA links).
Then, it emits a targeted MTU notifier for the user port (sw0p1), again
with MTU 1700 (this doesn't matter).

Command 2. emits a non-targeted MTU notifier for the CPU port (sw0p0)
with the largest_mtu calculated across switch 1, of 1600. This matches
the same group of ports as above, and decreases the MTU for the CPU port
and the DSA links from 1700 to 1600.

As a result, the sw0p1 user port can no longer communicate with its CPU
port at MTU 1700.

To address this, we should calculate the largest_mtu across all switches
that may share a CPU port, and only emit MTU notifiers with that value.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the notifier for adding a multicast MAC address matches on
the targeted port and on all DSA links in the system, be they upstream
or downstream links.

This leads to a considerable amount of useless traffic.

Consider this daisy chain topology, and a MDB add notifier emitted on
sw0p0. It matches on sw0p0, sw0p3, sw1p3 and sw2p4.

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  user ] [  user ] [  user ] [  dsa  ] [  cpu  ]
[   x   ] [       ] [       ] [   x   ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [   x   ] [   x   ]
                                  |
                                  +---------+
                                            |
   sw2p0     sw2p1     sw2p2     sw2p3     sw2p4
[  user ] [  user ] [  user ] [  user ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

But switch 0 has no reason to send the multicast traffic for that MAC
address on sw0p3, which is how it reaches switches 1 and 2. Those
switches don't expect, according to the user configuration, to receive
this multicast address from switch 1, and they will drop it anyway,
because the only valid destination is the port they received it on.
They only need to configure themselves to deliver that multicast address
_towards_ switch 1, where the MDB entry is installed.

Similarly, switch 1 should not send this multicast traffic towards
sw1p3, because that is how it reaches switch 2.

With this change, the heat map for this MDB notifier changes as follows:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  user ] [  user ] [  user ] [  dsa  ] [  cpu  ]
[   x   ] [       ] [       ] [       ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]
                                  |
                                  +---------+
                                            |
   sw2p0     sw2p1     sw2p2     sw2p3     sw2p4
[  user ] [  user ] [  user ] [  user ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

Now the mdb notifier behaves the same as the fdb notifier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The difference between dsa_is_user_port and dsa_port_is_user is that the
former needs to look up the list of ports of the DSA switch tree in
order to find the struct dsa_port, while the latter directly receives it
as an argument.

dsa_is_user_port is already in widespread use and has its place, so
there isn't any chance of converting all callers to a single form.
But being able to do:
	dsa_port_is_user(dp)
instead of
	dsa_is_user_port(dp->ds, dp->index)

is much more efficient too, especially when the "dp" comes from an
iterator over the DSA switch tree - this reduces the complexity from
quadratic to linear.

Move these helpers from dsa2.c to include/net/dsa.h so that others can
use them too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cross-chip notifiers work by comparing each ds->index against the
info->sw_index value from the notifier. The ds->index is retrieved from
the device tree dsa,member property.

If a single tree cross-chip topology does not declare unique switch IDs,
this will result in hard-to-debug issues/voodoo effects such as the
cross-chip notifier for one switch port also matching the port with the
same number from another switch.

Check in dsa_switch_parse_member_of() whether the DSA switch tree
contains a DSA switch with the index we're preparing to add, before
actually adding it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the chackpatch.pl, no space before tabs.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the chackpatch.pl, comparison to NULL could
be written "!card".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Add support for module EEPROM read by page

Add support for ethtool_ops::get_module_eeprom_by_page() operation.

Patch #1 adds necessary field in device register.

Patch #2 documents possible MCIA status values so that more meaningful
error messages could be returned to user space via extack.

Patch #3 adds the actual implementation.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ethtool_ops::get_module_eeprom_by_page() which allows
user space to read transceiver module EEPROM based on passed parameters.

The I2C address is not validated in order to avoid module-specific code.
In case of wrong address, error will be returned from device's firmware.

Tested by comparing output with legacy method (ioctl) output.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Will be used to emit meaningful messages to user space via extack in a
subsequent patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add bank number to MCIA (Management Cable Info Access) register in order
to allow access to banked pages on EEPROMs using CMIS (Common Management
Interface Specification) memory map.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: add support for IPA v3.1

This series adds support for IPA v3.1, used by the Qualcomm
Snapdragon 835 (MSM8998).

The first patch adds "qcom,msm8998-ipa" to the DT binding.

The next four patches add code to ensure correct operation on
IPA v3.1:
  - Avoid touching unsupported inter-EE interrupt mask registers
  - Set the proper flags in the clock configuration register
  - Work around the lack of an IPA FLAVOR_0 register
  - Work around the lack of a GSI PARAM_2 register

The last patch defines configuration data for this version of IPA.

Many thanks are due to AngeloGioacchino Del Regno and Jami Kettunen,
both associated with SoMainline.  Angelo first posted code to
implement most of what was required for this, and Jami has been
helpful testing these changes on his hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the MSM8998 SoC, which includes IPA version 3.1.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-6-angelogioacchino.delregno@somainline.orgSigned-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to IPA v3.5.1, there is no HW_PARAM_2 GSI register, which we
use to determine the number of channels and endpoints per execution
environment.  In that case, we will just assume the number supported
is the maximum supported by the driver.

Introduce gsi_ring_setup() to encapsulate the code that determines
the number of channels and endpoints.

Update GSI_EVT_RING_COUNT_MAX so it is big enough to handle any
available channel for all supported hardware (IPA v4.9 can have 23
channels and 24 event rings).
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>

The FLAVOR_0 version first appears in IPA v3.5, so avoid attempting
to read it for versions prior to that.

This register contains a concise definition of the number and
direction of endpoints supported by the hardware, and without it
we can't verify endpoint configuration in ipa_endpoint_config().
In this case, just indicate that any endpoint number is available
for use.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-3-angelogioacchino.delregno@somainline.orgSigned-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>

For IPA v3.1, a workaround is needed to disable gating on a MISC
clock.  I have no further explanation, but this is what the
downstream code (msm-4.4) does.

This was suggested in a patch from AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-2-angelogioacchino.delregno@somainline.orgSigned-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>

The GSI inter-EE interrupts are not supported prior to IPA v3.5.
Don't attempt to initialize them in gsi_irq_setup() for hardware
that does not support them.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/netdev/20210211175015.200772-4-angelogioacchino.delregno@somainline.orgSigned-off-by: Alex Elder <elder@linaro.org>
Acked-by: AngeloGioacchino Del Regno
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for "qcom,msm8998-ipa", which uses IPA v3.1.

Originally proposed by AngeloGioacchino Del Regno.

Link: https://lore.kernel.org/linux-arm-msm/20210211175015.200772-8-angelogioacchino.delregno@somainline.orgSigned-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We only care about exclusive or of those, so pass that directly.
Makes life simpler for callers as well...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can do that more or less safely, since the parent is
held locked all along.  Yes, somebody might observe the
object via dcache, only to have it disappear afterwards,
but there's really no good way to prevent that.  It won't
race with other bind(2) or attempts to move the sucker
elsewhere, or put something else in its place - locked
parent prevents that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Final preparations for doing unlink on failure past the successful
mknod.  We can't hold ->bindlock over ->mknod() or ->unlink(), since
either might do sb_start_write() (e.g. on overlayfs).  However, we
can do it while holding filesystem and VFS locks - doing
	kern_path_create()
	vfs_mknod()
	grab ->bindlock
	if u->addr had been set
		drop ->bindlock
		done_path_create
		return -EINVAL
	else
		assign the address to socket
		drop ->bindlock
		done_path_create
		return 0
would be deadlock-free.  Here we massage unix_bind_bsd() to that
form.  We are still doing equivalent transformations.

Next commit will *not* be an equivalent transformation - it will
add a call of vfs_unlink() before done_path_create() in "alread bound"
case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

unix_bind_bsd() and unix_bind_abstract() respectively.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We do get some duplication that way, but it's minor compared to
parts that are different.  What we get is an ability to change
locking in BSD case without making failure exits very hard to
follow.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

makes it easier to massage; we do pay for that by extra work
(kmalloc+memcpy+kfree) in some error cases, but those are not
on the hot paths anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Duplicated logics in all bind variants (autobind, bind-to-path,
bind-to-abstract) gets taken into a common helper.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The nfp_fl_ct_add_flow() function can fail so we need to check for
failure.

Fixes: 95255017 ("nfp: flower-ct: add nft flows to nft list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We recently changed these two pointers from void pointers to struct
pointers and it breaks the pointer math so now the "txphdr" points
beyond the end of the buffer.

Fixes: 56a967c4 ("net: qualcomm: rmnet: Remove some unneeded casts")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The address of &ipc_mux->ul_adb can't be NULL because it points to the
middle of a non-NULL struct.

Fixes: 9413491e ("net: iosm: encode or decode datagram")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These functions return negative ENODATA but the minus sign was left out
in the tests.

Fixes: f0dd7bf5 ("net/smc: Add netlink support for SMC fallback statistics")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These flags are used to set and test bits like this:

	if (!test_bit(HCLGE_PTP_FLAG_TX_EN, &ptp->flags) ||

The issue is that test_bit() takes a bit number like 1, but we are
passing BIT(1) instead and it's testing BIT(BIT(1)).  This does not
cause a problem because it is always done consistently and the bit
values are very small.

Fixes: 0bf5eb78 ("net: hns3: add support for PTP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch doesn't affect runtime at all, it's just a correctness issue.

The ptp->info.name[] buffer has 16 characters but the snprintf() limit
was capped at 32 characters.  Fortunately, HCLGE_DRIVER_NAME is "hclge"
which isn't close to 16 characters so we're fine.

Fixes: 0bf5eb78 ("net: hns3: add support for PTP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ChaCha support did not adjust the bidirectional test.
We need to set up KTLS in reverse direction correctly,
otherwise these two cases will fail:

  tls.12_chacha.bidir
  tls.13_chacha.bidir

Fixes: 4f336e88 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

A bunch of tests uses uninitialized stack memory as random
data to send. This is harmless but generates compiler warnings.
Explicitly init the buffers with random data.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh

scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc7, including fixes from wireless, bpf,
  bluetooth, netfilter and can.

  Current release - regressions:

   - mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
     to fix modifying offloaded qdiscs

   - lantiq: net: fix duplicated skb in rx descriptor ring

   - rtnetlink: fix regression in bridge VLAN configuration, empty info
     is not an error, bot-generated "fix" was not needed

   - libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem
     creation

  Current release - new code bugs:

   - ethtool: fix NULL pointer dereference during module EEPROM dump via
     the new netlink API

   - mlx5e: don't update netdev RQs with PTP-RQ, the special purpose
     queue should not be visible to the stack

   - mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs

   - mlx5e: verify dev is present in get devlink port ndo, avoid a panic

  Previous releases - regressions:

   - neighbour: allow NUD_NOARP entries to be force GCed

   - further fixes for fallout from reorg of WiFi locking (staging:
     rtl8723bs, mac80211, cfg80211)

   - skbuff: fix incorrect msg_zerocopy copy notifications

   - mac80211: fix NULL ptr deref for injected rate info

   - Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs

  Previous releases - always broken:

   - bpf: more speculative execution fixes

   - netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local

   - udp: fix race between close() and udp_abort() resulting in a panic

   - fix out of bounds when parsing TCP options before packets are
     validated (in netfilter: synproxy, tc: sch_cake and mptcp)

   - mptcp: improve operation under memory pressure, add missing
     wake-ups

   - mptcp: fix double-lock/soft lookup in subflow_error_report()

   - bridge: fix races (null pointer deref and UAF) in vlan tunnel
     egress

   - ena: fix DMA mapping function issues in XDP

   - rds: fix memory leak in rds_recvmsg

  Misc:

   - vrf: allow larger MTUs

   - icmp: don't send out ICMP messages with a source address of 0.0.0.0

   - cdc_ncm: switch to eth%d interface naming"

* tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits)
  net: ethernet: fix potential use-after-free in ec_bhf_remove
  selftests/net: Add icmp.sh for testing ICMP dummy address responses
  icmp: don't send out ICMP messages with a source address of 0.0.0.0
  net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
  net: ll_temac: Fix TX BD buffer overwrite
  net: ll_temac: Add memory-barriers for TX BD access
  net: ll_temac: Make sure to free skb when it is completely used
  MAINTAINERS: add Guvenc as SMC maintainer
  bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
  bnxt_en: Fix TQM fastpath ring backing store computation
  bnxt_en: Rediscover PHY capabilities after firmware reset
  cxgb4: fix wrong shift.
  mac80211: handle various extensible elements correctly
  mac80211: reset profile_periodicity/ema_ap
  cfg80211: avoid double free of PMSR request
  cfg80211: make certificate generation more robust
  mac80211: minstrel_ht: fix sample time check
  net: qed: Fix memcpy() overflow of qed_dcbx_params()
  net: cdc_eem: fix tx fixup skb leak
  net: hamradio: fix memory leak in mkiss_close
  ...

Pull btrfs fix from David Sterba:
 "One more fix, for a space accounting bug in zoned mode. It happens
  when a block group is switched back rw->ro and unusable bytes (due to
  zoned constraints) are subtracted twice.

  It has user visible effects so I consider it important enough for late
  -rc inclusion and backport to stable"

* tag 'for-5.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix negative space_info->bytes_readonly

Pull PCI fixes from Bjorn Helgaas:

 - Clear 64-bit flag for host bridge windows below 4GB to fix a resource
   allocation regression added in -rc1 (Punit Agrawal)

 - Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter)

 - Avoid secondary bus resets on TI KeyStone C667X devices (Antti
   Järvinen)

 - Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni)

 - Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun)

 - Avoid broken ATS on AMD Navi14 GPU (Evan Quan)

 - Trust Broadcom BCM57414 NIC to isolate functions even though it
   doesn't advertise ACS support (Sriharsha Basavapatna)

 - Work around AMD RS690 BIOSes that don't configure DMA above 4GB
   (Mikel Rychliski)

 - Fix panic during PIO transfer on Aardvark controller (Pali Rohár)

* tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: aardvark: Fix kernel panic during PIO transfer
  PCI: Add AMD RS690 quirk to enable 64-bit DMA
  PCI: Add ACS quirk for Broadcom BCM57414 NIC
  PCI: Mark AMD Navi14 GPU ATS as broken
  PCI: Work around Huawei Intelligent NIC VF FLR erratum
  PCI: Mark some NVIDIA GPUs to avoid bus reset
  PCI: Mark TI C667X to avoid bus reset
  PCI: tegra194: Fix MCFG quirk build regressions
  PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB

If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter.  This may be reported by lockdep like this:

====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
 #0: ffff888104eac530
 (
sb_pagefaults

as filesystem freezing is modelled as a lock.

Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.

Fixes: 1cf7a151 ("afs: Implement shared-writeable mmap")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210616154900.1958373-1-willy@infradead.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>