- 03 Sep, 2019 16 commits
-
-
Arnd Bergmann authored
Merge tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update with new clocks: - A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board device tree support. - Add DSP device tree support for i.MX8QXP SoC. * tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8qxp: Add DSP DT node arm64: dts: imx8mn: Add cpu-freq support arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support arm64: dts: imx8mn-ddr4-evk: Add i2c1 support arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support arm64: dts: imx8mn: Add gpio-ranges property arm64: dts: freescale: Add i.MX8MN dtsi support clk: imx8: Add DSP related clocks clk: imx: Add support for i.MX8MN clock driver clk: imx: Add API for clk unregister when driver probe fail clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usage dt-bindings: imx: Add clock binding doc for i.MX8MN Link: https://lore.kernel.org/r/20190825153237.28829-4-shawnguo@kernel.orgSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'imx-bindings-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.4 - Add SoC bindings for i.MX8MN. - Add board bindings for pico-pi-imx8m, Hummingboard Pulse, imx8mq nitrogen, i.MX8QXP AI_ML, ls1046a-frwy etc. - Add vendor prefix for Anvo-Systems and Einfochips. - Update LPUART bindings for i.MX8QXP clock requirement. - Update imx-weim bindings for optional burst clock mode support. - Update EEPROM bindings for Anvo ANV32E61W device support. * tag 'imx-bindings-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add Kontron i.MX6UL N6310 compatibles dt-bindings: eeprom: at25: Add Anvo ANV32E61W dt-bindings: vendor-prefixes: Add Anvo-Systems dt-bindings: arm: fsl: add Hummingboard Pulse dt-bindings: arm: imx: add imx8mq nitrogen support dt-bindings: fsl: dspi: Add fsl,ls1088a-dspi compatible string dt-bindings: arm: imx: Add the soc binding for i.MX8MN dt-bindings: bus: imx-weim: document optional burst clock mode dt-bindings: arm: fsl: Add the pico-pi-imx8m board dt-bindings: arm: Document i.MX8QXP AI_ML board binding dt-bindings: Add Vendor prefix for Einfochips dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board dt-bindings: serial: lpuart: add the clock requirement for imx8qxp dt-bindings: arm: fsl: Add support for ZII i.MX7 RMU2 board Link: https://lore.kernel.org/r/20190825153237.28829-3-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.4 New machines: - Facebook Wedge100, Wedge40 and Minipack - Lenovo Hr855xg2 - Wistron Mihawk There's a few other updates, notably some changes to to use the newly added SDHCI driver. * tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: swift: Add eMMC device ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB ARM: dts: aspeed: Describe SD controllers ARM: dts: aspeed: Add Mihawk BMC platform ARM: dts: aspeed: fp5280g2: Fix power supply address ARM: dts: aspeed: tiogapass: Add Riser card ARM: dts: aspeed: tiogapass: Move battery sensor ARM: dts: aspeed: Add Facebook Wedge100 BMC ARM: dts: aspeed: Add Facebook Wedge40 BMC ARM: dts: aspeed: swift: Fix FSI GPIOs ARM: dts: aspeed: Add SGPM pinmux ARM: dts: aspeed: tiogapass: Add VR devices ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC ARM: dts: aspeed: Add Facebook Minipack BMC Link: https://lore.kernel.org/r/CACPK8XfKHpNYXNE_VRaLeGUQa7-hkmUS0nsPfaeSLE4sckKFHg@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts changes for omap variants for v5.4 Remove regulator-boot-off properties that we never had in the mainline kernel so they won't do anything. We add stdout-path for gta04, and make am335x-boneblue use am335x-osd335x-common.dtsi file. * tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi ARM: dts: gta04: define chosen/stdout-path ARM: dts: omap3-n950-n9: Remove regulator-boot-off property ARM: dts: am335x-cm-t335: Remove regulator-boot-off property Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.3-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8183: - fix pwrap interrupt number - add i2c notes dt-bindings: - add compatible for mt6779 - add mt6779 uart and sysirq compatible * tag 'v5.3-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: irq: mtk, sysirq: add support for mt6779 dt-bindings: mtk-uart: add mt6779 uart bindings dt-bindings: mediatek: add support for mt6779 reference board arm64: dts: mt8183: add I2C nodes arm64: dts: mt8183: fix pwrap gic number Link: https://lore.kernel.org/r/def8fb77-fce4-097d-7ae2-8c4670bc09c1@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt add support for the mt7629 reference board * tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mediatek: add basic support for MT7629 SoC Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.4 Our usual pile of patches for the next release, which include mostly: - More fixes thanks to the DT validation using the YAML bindings - IR receiver support on the H6 - SPDIF support on the H6 - I2C Support on the H6 - CSI support on the A20 - RTC support on the H6 - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC * tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits) arm64: dts: allwinner: orange-pi-3: Enable WiFi ARM: dts: sunxi: Add missing watchdog clocks ARM: dts: sunxi: Add missing watchdog interrupts arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree ARM: dts: sun7i: Add CSI0 controller arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC) dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC ARM: dts: v3s: Change the timers compatible ARM: dts: h3: Change the timers compatible ARM: dts: a83t: Change the timers compatible ARM: dts: a23/a33: Change the timers compatible ARM: dts: sun6i: Add missing timers interrupts ARM: dts: sun5i: Add missing timers interrupts ARM: dts: sun4i: Add missing timers interrupts dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema arm64: dts: allwinner: h6: Introduce Tanix TX6 board dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board arm64: allwinner: h6: add I2C nodes dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node. ARM: dts: sunxi: Add mdio bus sub-node to GMAC ... Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhostSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-dt-bindings-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.4 (take two) - Renesas DT binding doc filename cleanups, - R-Car Gen3 and RZ/G1 updates for the R-Car CAN and CANFD DT bindings. * tag 'renesas-dt-bindings-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: can: rcar_can: document r8a77470 support dt-bindings: can: rcar_canfd: document r8a77995 support dt-bindings: can: rcar_can: document r8a77995 support dt-bindings: can: rcar_can: document r8a77990 support dt-bindings: rcar-{csi2,vin}: Rename bindings documentation files dt-bindings: rcar-imr: Rename bindings documentation file dt-bindings: Rename file of DT bindings for Renesas memory controllers Link: https://lore.kernel.org/r/20190823123643.18799-6-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.4 (take two) - Sort nodes in various SoC and board DTSes, - HDMI sound for HiHope RZ/G2M and R-Car M3-N Salvator-X(S) boards, - Limit EtherAVB to 100Mbps on the Ebisu and Draak boards, - Small fixes and improvements. * tag 'renesas-arm64-dt-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (21 commits) arm64: dts: renesas: Update 'vsps' properties for readability arm64: dts: renesas: r8a77965-salvator-x(s): Enable HDMI sound arm64: dts: renesas: r8a774c0: Fix register range of display node arm64: dts: renesas: r8a77970: Sort nodes arm64: dts: renesas: r8a7796: Sort nodes arm64: dts: renesas: r8a774c0: Sort nodes arm64: dts: renesas: r8a774c0: cat874: Sort nodes arm64: dts: renesas: r8a774a1: Sort nodes arm64: dts: renesas: r8a77980: Fix IPMMU-VC0 base address arm64: dts: renesas: ebisu, draak: Limit EtherAVB to 100Mbps arm64: dts: renesas: hihope-common: Add HDMI audio support arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulator arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1 arm64: dts: renesas: r8a77995: Sort nodes arm64: dts: renesas: r8a77995: draak: Sort nodes arm64: dts: renesas: r8a77990: Sort nodes arm64: dts: renesas: r8a77990: ebisu: Sort nodes arm64: dts: renesas: r8a77980: v3hsk: Sort nodes arm64: dts: renesas: r8a77980: condor: Sort nodes arm64: dts: renesas: r8a77970: v3msk: Sort nodes ... Link: https://lore.kernel.org/r/20190823123643.18799-4-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.4 - Fix HSCIF PM Domain on R-Car H1, - PMU support for RZ/G1C. * tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: r8a77470: Add PMU device node ARM: dts: r8a7779: Use SYSC "always-on" PM Domain for HSCIF Link: https://lore.kernel.org/r/20190823123643.18799-2-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.4 Highlights - new SoCs (G12B family): S922X, A311D - new SoCs (SM1 family): S905X3 - new board: SEI Robotics SEI610 (SM1/S905X3) - new board: Khadas VIM3 (G12B/A311D) - DVFS/CPUfreq support on G12[AB] family * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (40 commits) arm64: dts: add support for SM1 based SEI Robotics SEI610 dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings dt-bindings: arm: amlogic: add SM1 bindings arm64: dts: meson-g12b-odroid-n2: enable DVFS arm64: dts: meson-g12b-khadas-vim3: add initial device-tree dt-bindings: arm: amlogic: fix x96-max/sei510 section in amlogic.yaml arm64: dts: amlogic: g12 CPU timers stop in suspend arm64: dts: meson-g12b: support a311d and s922x cpu operating points dt-bindings: arm: amlogic: add support for the Khadas VIM3 dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC arm64: dts: meson: add video decoder entries arm64: dts: meson-gx: add video decoder entry dt-bindings: media: amlogic,vdec: add default compatible arm64: dts: meson: add ethernet fifo sizes arm64: dts: meson-g12b: add cpus OPP tables arm64: dts: meson-g12a: enable DVFS on G12A boards arm64: dts: meson-g12a: add cpus OPP table arm64: dts: meson-g12-common: add pwm_a on GPIOE_2 pinmux arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi ... Link: https://lore.kernel.org/r/7hr25fbi4v.fsf@baylibre.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.4 Highlights - odroid-c1: use MAC address from efuse - add VDD_EE regulator to several boards * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse ARM: dts: meson8b: mxq: add the VDDEE regulator ARM: dts: meson8b: odroidc1: add the VDDEE regulator ARM: dts: meson8b: ec100: add the VDDEE regulator ARM: dts: meson8b: add the PWM_D output pin ARM: dts: meson8b: add ethernet fifo sizes Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.4 - Add reset properties for various peripherals - QSPI OCP and DMA on Arria10 - DMA on Agilex/Stratix10 - Update NAND controller bindings to match driver update - Add NAND controller to Stratix10 - VINING FPGA board fixups - Update button mapping - Adjust GMAC1 clock and TXD skew settings - Add missing reset-names for dma controller * tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: add missing reset-names for dma ARM: dts: socfpga: Adjust GMAC1 clock and TXD lines skew on VINING FPGA ARM: dts: socfpga: Fix up button mapping on VINING FPGA arm64: dts: stratix10: Add NAND device node ARM: dts: socfpga: update to new Denali NAND binding arm64: dts: agilex/stratix10: Add reset properties for DMA ARM: dts: socfpga: add reset properties for DMA ARM: dts: socfpga: add the QSPI OCP reset property on arria10 Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt PWM-Fan and nor-flash for the RockPro64, a better display mode for the Kevin Chromebook and a new board the Leez P710 SBC. * tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC arm64: dts: rockchip: enable internal SPI flash for RockPro64. arm64: dts: rockchip: Add PWM fan for RockPro64 arm64: dts: rockchip: Specify override mode for kevin panel Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org Link: https://lore.kernel.org/r/2362486.gYoCZEsBuK@philSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt A lot more love for Veyron devices with cleanups in the display and wifi areas and also a 100ms speedup as a delay isn't needed anymore. New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme Mini S6, which I think is the first consumer-grade rk3229-based device in the kernel. * tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: add device tree for Mecer Xtreme Mini S6 Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators" ARM: dts: rockchip: Add pin names for rk3288-veyron fievel ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger} ARM: dts: rockchip: Cleanup style around assignment operator ARM: dts: rockchip: add veyron-tiger board ARM: dts: rockchip: add veyron-fievel board dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger} ARM: dts: rockchip: consolidate veyron panel and backlight settings ARM: dts: rockchip: move rk3288-veryon display settings into a separate file ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@philSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Samsung DTS ARM changes for v5.4 1. Add AHCI to Exynos5250, 2. Add camera and GPU power domains to Exynos5422, 3. Minor cleanup. * tag 'samsung-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add CAM power domain to Exynos5422/5800 ARM: dts: exynos: Add G3D power domain to Exynos542x ARM: dts: exynos: Move MSC power domain to the right (sorted) place ARM: dts: exynos: Add port map to Exynos5250 AHCI node ARM: dts: exynos: Use space after '=' in exynos4412-itop-scp-core Link: https://lore.kernel.org/r/20190816163042.6604-2-krzk@kernel.orgSigned-off-by:
-
- 24 Aug, 2019 6 commits
-
-
Krzysztof Kozlowski authored
Add the compatibles for Kontron i.MX6UL N6310 SoM and boards. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Krzysztof Kozlowski authored
Document the compatible for ANV32E61W 64kb Serial SPI non-volatile SRAM. Although it is a SRAM device, it can be accessed through EEPROM interface. At least until there is no proper SRAM driver support for it. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Add vendor prefix for Anvo-Systems Dresden GmbH. Signed-off-by:
-
Baruch Siach authored
Add binding documentation for the SolidRun Hummingboard Pulse board. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Gary Bisson authored
The Nitrogen8M is an ARM based single board computer (SBC) designed to leverage the full capabilities of NXP’s i.MX8M Quad processor. Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> [Dafna: porting vendor's code to mainline] Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
-
Chuanhua Han authored
new compatible string: "fsl,ls1088a-dspi". Signed-off-by:
Chuanhua Han <chuanhua.han@nxp.com> Acked-by:
-
- 23 Aug, 2019 18 commits
-
-
Mars Cheng authored
Add binding documentation of mediatek,sysirq for mt6779 SoC. Signed-off-by:
Mars Cheng <mars.cheng@mediatek.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Mars Cheng authored
Add documentation for mt6779 uart dt-bindings Signed-off-by:
-
Mars Cheng authored
Update binding document for mt6779 reference board Signed-off-by:
-
Cao Van Dong authored
Document SoC specific bindings for R-Car RZ/G1C(r8a77470) SoC. Signed-off-by:
Cao Van Dong <cv-dong@jinso.co.jp> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
Adds compatible strings for the R-Car CAN FD controller in the D3 SoC. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Ulrich Hecht authored
Adds compatible strings for the R-Car CAN controller in the D3 SoC. Signed-off-by:
-
Marek Vasut authored
Document the support for rcar_can on R8A77990 SoC devices. Add R8A77990 to the list of SoCs which require the "assigned-clocks" and "assigned-clock-rates" properties. Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by:
-
Ondrej Jirman authored
Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by the two always on regulators (not AXP805). WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be configured so that it sets up an 1.8V input bias on this port. This is done by the pio driver by reading the vcc-pg-supply voltage. You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt configuration that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 Mainline brcmfmac driver expects the firmware and nvram at the following paths relative to the firmware directory: brcm/brcmfmac43456-sdio.bin brcm/brcmfmac43456-sdio.txt Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com>
-
Maxime Ripard authored
The watchdog has a clock on all our SoCs, but it wasn't always listed. Add it to the devicetree where it's missing. Signed-off-by: -
Maxime Ripard authored
The watchdog has an interrupt on all our SoCs, but it wasn't always listed. Add it to the devicetree where it's missing. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Ondrej Jirman authored
This patch adds RTC node and fixes the clock properties and nodes to reflect the real clock tree. The device nodes for the internal oscillator and osc32k are removed, as these clocks are now provided by the RTC device. Clock references are fixed accordingly, too. Signed-off-by:
-
Maxime Ripard authored
The CSI controller embedded in the A20 can be supported by our new driver. Let's add it to our DT. Signed-off-by: -
Sunil Mohan Adapa authored
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. This patch has been tested on A64-OLinuXino-1Ge16GW with Linux 5.0 from Debain. Basic benchmarks using Flexible IO Tester show reasonable performance from the eMMC. eMMC - Random Write: 21.3MiB/s eMMC - Sequential Write: 68.2MiB/s SD Card - Random Write: 1690KiB/s SD Card - Sequential Write: 11.0MiB/s Changes: v3: Separate dts for eMMC variants v2: Fix descriptions for VCC and VCCQ Link: https://github.com/armbian/build/commit/174953de1eb09e6aa1ef7075066b573dba625398Signed-off-by:
Martin Ayotte <martinayotte@gmail.com> [sunil@medhas.org Fix descriptions for VCC and VCCQ, separate dts for eMMC] Signed-off-by:
Sunil Mohan Adapa <sunil@medhas.org> Tested-by:
-
Sunil Mohan Adapa authored
A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. Add new compatible string to the bindings documentation for the A64 OlinuXino board variant with on-board eMMC. Signed-off-by:
-
Maxime Ripard authored
Unlike the A10 that has 6 timers available, the v3s has only three, with only three interrupts. Let's change the compatible to reflect that, and add the missing interrupts. Signed-off-by: -
Maxime Ripard authored
Unlike the A10 that has 6 timers available, the H3 has only two, with only two interrupts, just like the A23. Let's change the compatible to reflect that. Signed-off-by: -
Maxime Ripard authored
Unlike the A10 that has 6 timers available, the A83t has only two, with only two interrupts, just like the A23. Let's change the compatible to reflect that. Signed-off-by: -
Maxime Ripard authored
Unlike the A10 that has 6 timers available, the A23 and A33 has only two, with only two interrupts. Let's change the compatible to reflect that. Signed-off-by:
-
