Set the scontrol->control_data->cmd early to the same as scontrol->cmd.

This is a preparatory patch to remove the ctrl_cmd parameter for the
snd_sof_ipc_set_get_comp_data() function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-4-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The correct ipc_cmd can be selected based on the `ctrl_cmd` and the `set`
parameters:
if the ctrl_cmd is SOF_CTRL_CMD_BINARY then SOF_IPC_COMP_*_DATA
otherwise SOF_IPC_COMP_*_VALUE.

The SET or GET direction can be selected with the use of `set` parameter.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-3-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rename the send parameter to set in snd_sof_ipc_set_get_comp_data() and
sof_set_get_large_ctrl_data() to be more aligned with the function name.

No functional change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211215180404.53254-2-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The return value of device_property_read_u32_array() is not always 0.
To catch the exception in case that devm_kzalloc failed and the
rt5663->imp_table was NULL, which caused the failure of
device_property_read_u32_array.

Fixes: 450f0f6a ("ASoC: rt5663: Add the manual offset field to compensate the DC offset")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211215031550.70702-1-jiasheng@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Similar with commit 8a49cd11 ("ASoC: SOF: ACPI: avoid reverse
module dependency") we will be having hardware specific drivers that
link against a common "helper" framework.

sof-of-dev.c becomes a library with the interface defined in the newly
created file sof-of-dev.h.

This is the final step started with Kconfig simplification in
commit 7548a391 ("ASoC: SOF: i.MX: simplify Kconfig")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211215085703.137414-1-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

We've been adding a 'deep buffer' PCM device to several SOF topologies
in order to reduce power consumption. The typical use-case would be
music playback over a headset: this additional PCM device provides
more buffering and longer latencies, leaving the rest of the system
sleep for longer periods. Notifications and 'regular' low-latency
audio playback would still use the 'normal' PCM device and be mixed
with the 'deep buffer' before rendering on the headphone endpoint. The
tentative direction would be to expose this alternate device to
PulseAudio/PipeWire/CRAS via the UCM SectionModifier definitions.

That seemed a straightforward topology change until our automated
validation stress tests started reporting issues on SoundWire
platforms, when e.g. two START triggers might be send and conversely
the STOP trigger is never sent. The SoundWire stream state management
flagged inconsistent states when the two 'normal' and 'deep buffer'
devices are used concurrently with rapid play/stop/pause monkey
testing.

Looking at the soc-pcm.c code, it seems that the BE state
management needs a lot of love.

a) there is no consistent protection for the BE state. In some parts
of the code, the state updates are protected by a spinlock but in the
trigger they are not. When we open/play/close the two PCM devices in
stress tests, we end-up testing a state that is being modified. That
can't be good.

b) there is a conceptual deadlock: on stop we check the FE states to
see if a shared BE can be stopped, but since we trigger the BE first
the FE states have not been modified yet, so the TRIGGER_STOP is never
sent.

This patchset suggests the removal of the dedicated 'dpcm_lock' and
follows the design suggested by Takashi Iwai.  By default the
protection relies on the 'pcm_mutex', except for the FE and BE
triggers where the mutex cannot be used.  In this case, the FE PCM
lock is used instead. In the cases where a BE is added/removed, the
pcm_mutex and FE PCM lock are both taken.  In addition, the BE PCM
lock is used to serialize access to a shared BE.

With these patches I am able to run our entire validation suite
without any issues with this new 'deep buffer' topology, and no
regressions on existing solutions [1]. The tests were reproduced by
Bard Liao for SoundWire devices.

One might ask 'how come we didn't see this earlier'? The answer is
probably that the .trigger callbacks in most implementations seems to
perform DAPM operations, and sending the triggers multiple times is
not an issue. In the case of SoundWire, we do use the .trigger
callback to reconfigure the bus using the 'bank switch' mechanism. It
could be acceptable to tolerate a trigger multiple times, but the
deadlock on stop cannot be fixed at the SoundWire level alone.

Opens:

1) The issues reported by Nvidia on the RFCv3 may or may not be
present. We'd need test results to make sure the locking update does
not introduce a regression on Tegra.

2) There are other reports of kernel oopses [2] that seem related to
the lack of protection. I'd be good to confirm if this patchset solve
these problems as well.

[1] https://github.com/thesofproject/linux/pull/3146
[2] https://lore.kernel.org/alsa-devel/002f01d7b4f5$c030f4a0$4092dde0$@samsung.com/

changes since RFCv3:
Used two patches from Takashi. We now use the pcm_mutex, the FE stream
lock when adding and deleting a BE, and the BE stream lock to handle
concurrency between streams using the same BE.
Added a patch to use GFP_ATOMIC for the DPCM structure.
Fixed PAUSE_RELEASE transition (GitHub comment from Kai Vehmanen)

changes since RFCv2:
Removal of dpcm_lock to use FE PCM locks (credits to Takashi Iwai for
the suggestion). The FE PCM lock is now used before each use of
for_each_dpcm_be() - with the exception of the trigger where the lock
is already taken. This change is also applied in drivers which make
use of this loop (compress, SH, FSL).
Addition of BE PCM lock to deal with mutual exclusion between triggers
for the same BE.
Alignment of the BE atomicity on the FE on connections, this is
required to avoid sleeping in atomic context.
Additional cleanups (indentation, static functions)

changes since RFC v1:
Removed unused function
Removed exported symbols only used in soc-pcm.c, used static instead
Use a mutex instead of a spinlock
Protect all for_each_dpcm_be() loops
Fix bugs introduced in the refcount

Pierre-Louis Bossart (4):
  ASoC: soc-pcm: use GFP_ATOMIC for dpcm structure
  ASoC: soc-pcm: align BE 'atomicity' with that of the FE
  ASoC: soc-pcm: test refcount before triggering
  ASoC: soc-pcm: fix BE handling of PAUSE_RELEASE

Takashi Iwai (2):
  ASoC: soc-pcm: Fix and cleanup DPCM locking
  ASoC: soc-pcm: serialize BE triggers

 include/sound/soc-dpcm.h |   2 +
 include/sound/soc.h      |   2 -
 sound/soc/soc-core.c     |   1 -
 sound/soc/soc-pcm.c      | 351 +++++++++++++++++++++++++++------------
 4 files changed, 246 insertions(+), 110 deletions(-)

--
2.25.1

The function gpr_alloc_port return ERR_PTR on errors, it doesn't return
null.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211211065840.1221-1-linmq006@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Distinguish which headset codec is on the board by codec_dai->name
instead of card->name.

It fixes the crash of being unable to handle kernel paging requests
at virtual address ADDR by initializing the correct audio codec on
the board.

Call stack of the crash:
```
 Unable to handle kernel paging request at virtual address ...
 ...
 Call trace:
  rt5682_set_component_pll+0xcc/0xb78 [snd_soc_rt5682]
  snd_soc_component_set_pll+0x90/0x154
  snd_soc_dai_set_pll+0xf4/0x1ac
  sc7180_snd_startup+0x268/0x3c0 [snd_soc_sc7180]
  snd_soc_link_startup+0xa4/0x180
  soc_pcm_open+0x35c/0x15c8
  snd_pcm_open_substream+0xa90/0x13b0
  snd_pcm_open+0x1a4/0x55c
  snd_pcm_capture_open+0x7c/0xe8
  snd_open+0x2b8/0x2e4
  chrdev_open+0x364/0x3d4
  do_dentry_open+0x66c/0xc58
  vfs_open+0x7c/0x8c
  path_openat+0x108c/0x2bbc
  do_filp_open+0x15c/0x258
  do_sys_open+0x278/0x62c
  __arm64_compat_sys_openat+0x9c/0xb0
  ...
```

Fixes: 425c5fce ("ASoC: qcom: Add support for ALC5682I-VS codec")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20211214022509.1288245-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

A BE connected to more than one FE, e.g. in a mixer case, can go
through the following transitions.

play FE1    -> BE state is START
pause FE1   -> BE state is PAUSED
play FE2    -> BE state is START
stop FE2    -> BE state is STOP (see note [1] below)
release FE1 -> BE state is START
stop FE1    -> BE state is STOP

play FE1    -> BE state is START
pause FE1   -> BE state is PAUSED
play FE2    -> BE state is START
release FE1 -> BE state is START
stop FE2    -> BE state is START
stop FE1    -> BE state is STOP

play FE1    -> BE state is START
play FE2    -> BE state is START (no change)
pause FE1   -> BE state is START (no change)
pause FE2   -> BE state is PAUSED
release FE1 -> BE state is START
release FE2 -> BE state is START (no change)
stop FE1    -> BE state is START (no change)
stop FE2    -> BE state is STOP

The existing code for PAUSE_RELEASE only allows for the case where the
BE is paused, which clearly would not work in the sequences above.

Extend the allowed states to restart the BE when PAUSE_RELEASE is
received, and increase the refcount if the BE is already in START.

[1] the existing logic does not move the BE state back to PAUSED when
the FE2 is stopped. This patch does not change the logic; it would be
painful to keep a history of changes on the FE side, the state machine
is already rather complicated with transitions based on the last BE
state and the trigger type.
Reported-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207173745.15850-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

On start/pause_release/resume, when more than one FE is connected to
the same BE, it's possible that the trigger is sent more than
once. This is not desirable, we only want to trigger a BE once, which
is straightforward to implement with a refcount.

For stop/pause/suspend, the problem is more complicated: the check
implemented in snd_soc_dpcm_can_be_free_stop() may fail due to a
conceptual deadlock when we trigger the BE before the FE. In this
case, the FE states have not yet changed, so there are corner cases
where the TRIGGER_STOP is never sent - the dual case of start where
multiple triggers might be sent.

This patch suggests an unconditional trigger in all cases, without
checking the FE states, using a refcount protected by the BE PCM
stream lock.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207173745.15850-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When more than one FE is connected to a BE, e.g. in a mixing use case,
the BE can be triggered multiple times when the FE are opened/started
concurrently. This race condition is problematic in the case of
SoundWire BE dailinks, and this is not desirable in a general
case.

This patch relies on the existing BE PCM lock, which takes atomicity into
account. The locking model assumes that all interactions start with
the FE, so that there is no deadlock between FE and BE locks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[test, checkpatch fix and clarification of commit message by plbossart]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207173745.15850-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing locking for DPCM has several issues
a) a confusing mix of card->mutex and card->pcm_mutex.
b) a dpcm_lock spinlock added inconsistently and on paths that could
be recursively taken. The use of irqsave/irqrestore was also overkill.

The suggested model is:

1) The pcm_mutex is the top-most protection of BE links in the FE. The
pcm_mutex is applied always on either the top PCM callbacks or the
external call from DAPM, not taken in the internal functions.

2) the FE stream lock is taken in higher levels before invoking
dpcm_be_dai_trigger()

3) when adding and deleting a BE, both the pcm_mutex and FE stream
lock are taken.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[clarification of commit message by plbossart]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207173745.15850-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since the flow for DPCM is based on taking a lock for the FE first, we
need to make sure during the connection between a BE and an FE that
they both use the same 'atomicity', otherwise we may sleep in atomic
context.

If the FE is nonatomic, this patch forces the BE to be nonatomic as
well. That should have no negative impact since the BE 'inherits' the
FE properties.

However, if the FE is atomic and the BE is not, then the configuration
is flagged as invalid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ removed FE stream lock by tiwai ]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207173745.15850-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We allocate a structure in dpcm_be_connect(), which may be called in
atomic context. Using GFP_KERNEL is not quite right, we have to use
GFP_ATOMIC to prevent the allocator from sleeping.
Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207173745.15850-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Stephan Gerhold <stephan@gerhold.net>:

This series makes it possible to route audio through the combined
audio/modem DSP on MSM8916/APQ8016 devices instead of bypassing it using
the LPASS drivers. This is necessary to support certain functionality such
as voice call audio. See PATCH 4/5 for details.

Also, qcom,apq8016-sbc.txt is converted to DT schema by adding it to the
existing qcom,sm8250.yaml. The bindings are similar enough that it is easier
to share a single schema instead of duplicating everything into multiple ones.

Fix the following sparse warning: (new ones prefixed by >>)
>> sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c:370:33:
     sparse: sparse: incorrect type in argument 3 (different base types)
   sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c:370:33: sparse:
     expected unsigned int to
   sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c:370:33: sparse:
     got restricted snd_pcm_format_t [usertype]

Correct discription of format, use S32_LE and S24_LE to distinguish the
different 32bit.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211209073224.21793-1-jiaxin.yu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The only usage of sof_probe_compr_ops is to assign its address to the
cops field in the snd_soc_dai_driver struct (in
sound/soc/sof/intel/hda-dai.c). Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211204203220.54712-1-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In SOF OF device, pm_runtime_put_autosuspend() is not
matching any pm_runtime_get_sync().

This is imbalanced for PM runtime.

Also, for consistency we call pm_runtime_mark_last_busy()
before enabling PM runtime.

1. Remove pm_runtime_put_autosuspend() in probe_complete
2. Reorder PM runtime calls int probe_complete
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211209200830.145005-1-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The apq8016-sbc-sndcard is designed to be used with the LPASS drivers
(bypassing the combined audio/modem DSP in MSM8916/APQ8016).
Make it possible to use QDSP6 audio instead for the msm8916-qdsp6-sndcard.

This only requires adding some additional hooks that set up the DPCM
backends correctly. Similar code is already used in drivers for newer
SoCs such as apq8096.c, sdm845.c and sm8250.c.

A slightly different initialization sequence is used for the apq8016-sbc
and msm8916-qdsp6 sound card by defining the apq8016_sbc_add_ops()
function as device match data.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211202145505.58852-6-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

There are two possible audio setups on MSM8916/APQ8016: Normally the audio
is routed through the audio/modem DSP (covered by the qdsp6 driver). During
upstreaming for the DragonBoard 410c it was decided to bypass it and
instead talk directly to the audio controller using the "lpass" driver.

Bypassing the DSP gives more control about the audio configuration but limits
the functionality: For example, routing audio through the audio/modem DSP is
strictly required for voice call audio. Also, without the special changes in
the DB410c firmware other MSM8916 devices can only use the bypass as long as
the modem DSP is not started. Otherwise, the firmware will assume control of
the LPASS hardware block and audio is no longer functional.

Add support for using the DSP audio setup instead using a new
"qcom,msm8916-qdsp6-sndcard" compatible. It is basically a mixture of
the apq8016-sbc-sndcard and the newer sm8250-sndcard, which uses
indirect QDSP6 DAI links instead of the direct LPASS DAI links.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-5-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

All the Qualcomm sound card drivers use the same common device tree
parsing code, so the allowed device tree nodes are almost the same
for all of them. Convert the qcom,apq8016-sbc-sndcard documentation
to a DT schema by adding it to the existing qcom,sm8250 schema.

The only speciality of qcom,apq8016-sbc-sndcard is that it has memory
resources for setting up an I/O mux. This can be handled using
a conditional if statement that only requires it for the apq8016-sbc
compatible.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-4-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

The sm8250 audio driver uses the common Qualcomm device tree parser and
therefore already supports the "aux-devs" property that allows adding
additional auxiliary devices to the sound card (e.g. analog speaker
amplifiers that can be connected using "audio-routing").

Document the property in the DT schema for sm8250 as well. The description
is taken from simple-card.yaml which has a very similar property.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-3-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

The MultiMedia audio routes can be deduced from other parts of the
device tree (e.g. the definitions of the MultiMedia DAIs) and therefore
specifying them again in "audio-routing" is redundant and prone to
mistakes. This is no longer necessary since commit 6fd8d2d2
("ASoC: qcom: qdsp6: Move frontend AIFs to q6asm-dai").

Let's drop them from the example in the DT schema as well
to avoid confusion.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202145505.58852-2-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

Explain why JasperLake is exposed in cnl.c instead of icl.c
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code does not use the 'host_dma_id', 'link_dma_id',
'host_bps' fields remove them.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The code inherited from the Skylake driver does not seem to follow any
known hardware recommendations.

The only two recommended options are
a) use DPIB registers if VC1 traffic is not allowed
b) use DPIB DDR update if VC1 traffic is used

In all of SOF-based updated, VC1 is not supported so we can 'safely'
move to using DPIB registers only.

This patch keeps the legacy code, in case there was an undocumented
issue lost to history, and adds the DPIB DDR update for additional
debug.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code is inconsistent, we should only enable DPIB if the
'use_posbuf' field is true.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

we use 'bus->use_posbuf && bus->posbuf.addr' in
hda_dsp_ctrl_init_chip(), use the same for hda_dsp_ctrl_stop_chip()
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The work-around enabled in hda-stream.c is only required on earlier
versions of SOCs/PCH (Skylake, KabyLake, ApolloLake,
GeminiLake). Before setting the format on the host DMA, it is required
to couple the host and link DMA - which as a consequence shall use the
same format.

This patch introduces a quirk field in the platform descriptor and
makes the work-around conditional. Newer platforms have
no limitations on the use of host and link DMA, which can use
different formats.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the ICL specific ops to icl.c. Also introduce a
macro ICL_DSP_HPRO_CORE_ID to define the core that
should be powered up when HPRO is enabled.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211207193947.71080-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dereferncing of_id pointer will result in exception in current
implementation since of_match_device() will assign it to NULL.
Adding NULL check for protection.
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211207142309.222820-1-amhamza.mgc@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the interconnects and interconnect-names properties to the bindings
for the sound card on various NVIDIA Tegra based boards. These are used
to describe the device's memory paths to and from memory.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206154624.229018-1-thierry.reding@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the AMD machine drivers to use the new style defines for clocking
in DAI formats.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210915180957.39996-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Smatch complains that we might hit the continue path on every iteration
through the loop.

    sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c:831
      mt8195_mt6359_rt1019_rt5682_card_late_probe()
    error: uninitialized symbol 'sof_comp'.

Initialize "sof_comp" to NULL to silence this warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211208151145.GA29257@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

With a custom .config, the following error is thrown:

ERROR: modpost: "snd_soc_acpi_codec_list"
[sound/soc/amd/snd-acp-config.ko] undefined!

Fix by adding a clear dependency on SND_SOC_ACPI
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211207192309.43883-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the AMIC delay time to control how much delay time (ms) to unmute the stereo1 ADC.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20211208101654.28925-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move rt1015 driver code to common file to be consistent with
rt1011 and rt1015p.

No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211207192458.44007-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is a pop noise at the beginning of the capture data.
This patch adds the delay time before stereo1 ADC unmute to fix the pop sound issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20211208101718.28945-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Sparse warnings:

sound/soc/intel/boards/sof_maxim_common.c:140:33: error: symbol
'max_98390_dapm_routes' was not declared. Should it be static?

sound/soc/intel/boards/sof_maxim_common.c:156:33: error: symbol
'max_98390_tt_dapm_routes' was not declared. Should it be static?

Fixes: f316c9d9 ('ASoC: Intel: boards: add max98390 2/4 speakers support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211207211700.115319-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Ariel D'Alessandro <ariel.dalessandro@collabora.com>:

This is a follow up of patchsets:

  [RFC patch 0/5] Support BCLK input clock in tlv320aic31xx
  [PATCH 0/4] fsl-asoc-card: Add optional dt property for setting mclk-id

Patch "ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec"
in "[RFC patch 0/5] Support BCLK input clock in tlv320aic31xx" missed a
Kconfig option. Sending incremental patch fix.

Regards,
Ariel

Ariel D'Alessandro (1):
  ASoC: fsl-asoc-card: Add missing Kconfig option for tlv320aic31xx

 sound/soc/fsl/Kconfig | 1 +
 1 file changed, 1 insertion(+)

--
2.30.2