- 26 Mar, 2007 22 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fix usb-serial/ftdi build warning USB: fix usb-serial/generic build warning USB: another entry for the quirk list USB: remove duplicated device id in airprime driver USB: omap_udc: workaround dma_free_coherent() bogosity UHCI: Fix problem caused by lack of terminating QH
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Fix warning message in PCIE port driver PCI: Stop unhiding the SMBus on Toshiba laptops PCI: Fix up PCI power management doc pci: set pci=bfsort for PowerEdge R900
-
Russ Cox authored
Change prototypes for __chk_user_ptr and __chk_io_ptr to take const void* instead of void*, so that code can pass "const void *" to them. (Right now sparse does not warn about passing const void* to void* functions, but that is a separate bug that I believe Josh is working on, and once sparse does check this, the changed prototypes will be necessary.) Signed-off-by: Russ Cox <rsc@swtch.com> Signed-off-by: Josh Triplett <josh@freedesktop.org> Acked-by: Christopher Li <sparse@chrisli.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: make struct v9fs_cached_file_operations static
-
David Brownell authored
Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Fix annoying build warning when CONFIG_USB_SERIAL_GENERIC is undefined. drivers/usb/serial/generic.c:24: warning: `generic_probe' declared `static' but never defined Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
this scanner disconnects upon suspend. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jon K Hellan authored
Both airprime and option now want to handle vendor ID 0x1410, device ID 0x1100. Airprime calls it 'ExpressCard34 Qualcomm 3G CDMA'. Option calls it 'Novatel Merlin XS620/S640'. Patch attached to remove it from airprime. From: Jon K Hellan <jon.kare.hellan@uninett.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Various fixes to omap_udc, noted with some recent testing: - Cope with some SMP-induced braindamage in ARM's dma_{alloc,free}_coherent() implementation: alloc() can be called with IRQs blocked, but since late last year that's no longer true for free(). This resolves really NASTY problems with logspamming via WARN_ON(), indicating N-page leaks. - Be more correct in handling GET_STATUS request for RECIP_ENDPOINT ... the previous code only handled RECIP_INTERFACE, this version should be correct except for (sigh) bulk/interrupt endpoints. - Provide a better name for the function reporting whether the board has vbus sensing wired up. GET_STATUS requests for endpoint status still acts strangely though, at least given one flakey host doesn't always ack the first DATA packet, then the packet that gets retransmitted doesn't have data! Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as871) fixes a problem introduced by an earlier change. It turns out that some systems really do need to have a terminating skeleton QH present whenever FSBR is on. I don't know any way to tell which systems do need it and which don't; the easiest answer is to have it there always. This fixes the NumLock-hang bug reported by Jiri Slaby. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use correct IDE error recovery pdc202xx_new: Enable ATAPI DMA ide: cosmetic adaption of drivers/ide/Kconfig concerning SATA ide: fix locking for manual DMA enable/disable ("hdparm -d") ide: revert "ide: fix drive side 80c cable check, take 2" for now
-
Prarit Bhargava authored
PCIE error output should conform to vendor_id:device_id. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jean Delvare authored
It was found that the Toshiba laptops with hidden Intel SMBus have SMM code handling the thermal management which accesses the SMBus. Thus it is not safe to unhide it and let Linux access it. We have to leave the SMBus hidden. SMM is a pain, really. This fixes bugs #6315 and #6395, for good this time. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jonathan Corbet authored
Update the documentation of PCI power management functions. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matt Domsch authored
This patch automatically enables pci=bfsort for the Dell PowerEdge R900. This is necessary to ensure the onboard NICs enumerate in the proper order, similar to the other systems already on the list. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Thomas Gleixner authored
The current sysfs support of clockevents does not obey the "only one value per file" rule. The real fix is not 2.6.21 material. Therefor remove the sysfs support for now. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Suleiman Souhlal authored
IDE error recovery is using IDLE IMMEDIATE if the drive is busy or has DRQ set. This violates the ATA spec (can only send IDLE IMMEDIATE when drive is not busy) and really hoses up some drives (modern drives will not be able to recover using this error handling). The correct thing to do is issue a SRST followed by a SET FEATURES command. This is what Western Digital recommends for error recovery and what Western Digital says Windows does.  It also does not violate the ATA spec as far as I can tell. Bart: * port the patch over the current tree * undo the recalibration code removal * send SET FEATURES command after checking for good drive status * don't check whether the current request is of REQ_TYPE_ATA_{CMD,TASK} type because we need to send SET FEATURES before handling any requests * some pre-ATA4 drives require INITIALIZE DEVICE PARAMETERS command before other commands (except IDENTIFY) so send SET FEATURES only if there are no pending drive->special requests * update comments and patch description * any bugs introduced by this patch are mine and not Suleiman's :-) Signed-off-by: Suleiman Souhlal <suleiman@google.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Albert Lee authored
[ bart: the ressurection of 2 years old patch which slipped thru the cracks (thanks to Sergei Shtylyov for finding it) ] These is the patch to turn on pdc202xx_new for ATAPI DMA. When testing, it works fine without the (request_bufflen % 256) workaround as needed in libata. ide-scsi filters out (pc->request_transfer % 1024) and use PIO, so the pdc202xx ATAPI DMA problem is avoid. Both ide-cd and ide-scsi won't hit the ATAPI DMA problem on pdc202xx_new. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Patrick Ringl authored
Since especially Serial ATA has it's own menu point now, I guess we can change the description of the deprecated SATA driver as well, since the new libATA subsystem is not configured through a SCSI low-level driver anymore, but has it's own menu point. From: Patrick Ringl <patrick_@freenet.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Since hwif->ide_dma_check and hwif->ide_dma_on never queue any commands (ide_config_drive_speed() sets transfer mode using polling and has no error recovery) we are safe with setting hwgroup->busy for the time while DMA setting for a drive is changed (so it won't race against I/O commands in fly). I audited briefly all ->ide_dma_check/->ide_dma_on/->tuneproc/->speedproc implementations and they all look OK wrt to this change. This patch finally allowed me to close kernel bugzilla bug #8169 (once again thanks to Patrick Horn for reporting the issue & testing patches). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
"ide: fix drive side 80c cable check, take 2" patch from Tejun Heo (commit fab59375) fixed 80c bit test (bit13 of word93) but we also need to fix master/slave IDENTIFY order (slave device should be probed first in order to make it release PDIAG- signal) and we should also check for pre-ATA3 slave devices (which may not release PDIAG- signal). [ Unfortunately the fact that IDE driver doesn't reset devices itself helps only a bit as it seems that some BIOS-es reset ATA devices after programming the chipset, some BIOS-es can be set to not probe/configure selected devices, there may be no BIOS in case of add-on cards etc. ] Since we are quite late in the release cycle and the required changes will affect a lot of systems just revert the fix for now. [ Please also see libata commit f31f0cc2. ] Thanks goes out to Fernando Mitio Yamada for reporting the problem and patiently testing patches. Acked-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
This patch makes te needlessly global struct v9fs_cached_file_operations static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
-
- 25 Mar, 2007 4 commits
-
-
Linus Torvalds authored
.. hopefully most of the fallout of the timer changes is contained now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The watchdog implementation excludes low res / non continuous clocksources from being selected as a watchdog reference unintentionally. Allow using jiffies/PIT as a watchdog reference as long as no better clocksource is available. This is necessary to detect TSC breakage on systems, which have no pmtimer/hpet. The main goal of the initial patch (preventing to switch to highres/nohz when no reliable fallback clocksource is available) is still guaranteed by the checks in clocksource_watchdog(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The rework of next_timer_interrupt() fixed the timer wheel bugs, but invented a rounding error versus the next hrtimer event. This is caused by the conversion of the hrtimer internal representation to relative jiffies. This causes bug #8100: http://bugzilla.kernel.org/show_bug.cgi?id=8100 next_timer_interrupt() returns "now" in such a case and causes the code in tick_nohz_stop_sched_tick() to trigger the timer softirq, which is bogus as no timer is due for expiry. This results in an endless context switching between idle and ksoftirqd until a timer is due for expiry. Modify the hrtimer evaluation so that, it returns now + 1, when the conversion results in a delta < 1 jiffie. It's confirmed to resolve bug #8100 Reported-by: Emil Karlson <jkarlson@cc.hut.fi> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4278/1: configure pxa27x I2C SCL as "input" [ARM] 4272/1: Missing symbol h1940_pm_return fix [ARM] 4235/1: ns9xxx: declare the clock functions as "const" [ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms) [ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs
-
- 24 Mar, 2007 14 commits
-
-
Patrick Ringl authored
This is just a QA / cosmetic fix .. [ "a modules" => "a module" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Krufky authored
After dvb tuner refactoring, the pllbuff has been altered such that the pll address is now stored in buf[0]. Instead of sending buf to set_pll_input, we should send buf+1. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Ivan Andrewjeski <ivan@fiero-gt.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Guennadi Liakhovetski authored
It has been reported by Julian Deng that configuring the pxa27x i2c SCL line as output generates a short negative pulse on it during the call to pxa_gpio_mode(GPIO117_I2CSCL_MD); as it first switches it to output and then configures it for the alternate function. The SCL line is in fact bidirectional and can also be configured as 117 | GPIO_ALT_FN_1_IN, in which case the pulse is not generated. This is exactly what this patch does. Author: Julian Deng <dengtj@sitek.cn> Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Thomas Gleixner authored
commit f9690982 removed the check for cpu_khz from sched_clock(), which prevented early access to the TSC by non obvious magic. This is harmless as long as the CPU has a TSC. On TSCless systems this results in an illegal instruction trap. Replace tsc_disabled and tsc_unstable by tsc_enabled, which is only set when the tsc is available and not unstable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
CC arch/mips/mm/cerr-sb1.o arch/mips/mm/cerr-sb1.c: In function 'sb1_cache_error': arch/mips/mm/cerr-sb1.c:235: warning: format '%010llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t' arch/mips/mm/cerr-sb1.c: In function 'extract_ic': arch/mips/mm/cerr-sb1.c:385: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' arch/mips/mm/cerr-sb1.c:385: warning: format '%016llX' expects type 'long long unsigned int', but argument 6 has type 'uint64_t' arch/mips/mm/cerr-sb1.c: In function 'extract_dc': arch/mips/mm/cerr-sb1.c:523: warning: format '%010llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' arch/mips/mm/cerr-sb1.c:523: warning: format '%016llX' expects type 'long long unsigned int', but argument 7 has type 'uint64_t' arch/mips/mm/cerr-sb1.c:570: warning: format '%016llX' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' LD arch/mips/mm/built-in.o Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
arch/mips/jazz/jazzdma.c:70: warning: assignment makes integer from pointer without a cast Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
The missing cast did result a warning when calling an 32-bit ARC firmware function that takes 5 arguments where the 5th argument is a pointer from a 64-bit kernel. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
In the the sequence: ei .. mfc0 $x, $status the mfc0 may not see the SR_IE bit set. This was a deliberate bug in the kernel code because we knew this was a safe thing to do on all R2 silicon so far but new silicon is changing this. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Deepak Saxena authored
Signed-off-by: Manish Lachwani <mlachwani@mvista.com> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Franck Bui-Huu authored
This patch fixes two places where we used plain 'x - PAGE_OFFSET' to achieve virtual to physical address convertions. This type of convertion is no more allowed since commit 6f284a2c. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> [Build fixes for machines that don't use the generic dma-coherence.h] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-