The current driver can read the temperatures from upto 8 CCDs
(Core-Complex Die).

The newer AMD Family 19h Models 10h-1Fh and A0h-AFh can support up to
12 CCDs. Update the driver to read up to 12 CCDs.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163776976762.904164.5618896687524494215.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Provides a Linux kernel module "asus_wmi_sensors" that provides sensor
readouts via ASUS' WMI interface present in the UEFI of
X370/X470/B450/X399 Ryzen motherboards.

Supported motherboards:
* ROG CROSSHAIR VI HERO,
* PRIME X399-A,
* PRIME X470-PRO,
* ROG CROSSHAIR VI EXTREME,
* ROG CROSSHAIR VI HERO (WI-FI AC),
* ROG CROSSHAIR VII HERO,
* ROG CROSSHAIR VII HERO (WI-FI),
* ROG STRIX B450-E GAMING,
* ROG STRIX B450-F GAMING,
* ROG STRIX B450-I GAMING,
* ROG STRIX X399-E GAMING,
* ROG STRIX X470-F GAMING,
* ROG STRIX X470-I GAMING,
* ROG ZENITH EXTREME,
* ROG ZENITH EXTREME ALPHA.
Co-developed-by: Ed Brindley <kernel@maidavale.org>
Signed-off-by: Ed Brindley <kernel@maidavale.org>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
[groeck: Squashed:
 "hwmon: Fix warnings in asus_wmi_sensors.rst documetation."]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Linux HWMON sensors driver for ASUS motherboards to read
sensors from the embedded controller.

Many ASUS motherboards do not publish all the available
sensors via the Super I/O chip but the missing ones are
available through the embedded controller (EC) registers.

This driver implements reading those sensor data via the
WMI method BREC, which is known to be present in all ASUS
motherboards based on the AMD 500 series chipsets (and
probably is available in other models too). The driver
needs to know exact register addresses for the sensors and
thus support for each motherboard has to be added explicitly.

The EC registers do not provide critical values for the
sensors and as such they are not published to the HWMON.

Supported motherboards:
* PRIME X570-PRO
* Pro WS X570-ACE
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII DARK HERO
* ROG CROSSHAIR VIII FORMULA
* ROG STRIX X570-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX B550-E GAMING
Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Tor Vic <torvic9@mailbox.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This adds hardware monitor support the Fintek F81966 Super I/O chip.
Testing was done on the Aaeon SSE-IPTI
Signed-off-by: Menghui Wu <Menghui_Wu@aaeon.com.tw>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20211117024320.2428144-1-acelan.kao@canonical.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The adm1021 driver is quite generous with its automatic chip detection
and easily misdetects several chips. Strengthen detection of MAX1617,
MAX1617A, and LM84 to make the driver less vulnerable to false matches.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Since we are using regmap access functions to write into chip registers,
we can hide the difference in register write addresses within regmap
code. By doing this we do not need to clear the regmap cache on register
writes, and the high level code does not need to bother about different
read/write register addresses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use regmap for register accesses to be able to utilize its caching
functionality. This also lets us hide register access differences
in regmap code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The new API is cleaner and reduces code size significantly.
All chip accesses are 'hidden' in chip access to prepare for using
regmap. Local caching code is removed, to be replaced by regmap based
caching in a follow-up patch.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The difference between TMP431 and other chips of this series is that the
TMP431 has an additional sensor. The register addresses for other sensors
are the same for all chips. It is therefore unnecessary to maintain two
different arrays for TMP431 and the other chips. Just use the same array
for all chips and add the TMP431 register addresses as third column.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The INA238 is a I2C power monitor similar to other INA2xx devices,
providing shunt voltage, bus voltage, current, power and temperature
measurements.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Link: https://lore.kernel.org/r/20211102052754.817220-3-nathan@nathanrossi.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add a property to the binding to define the selected shunt voltage gain.
This specifies the range and accuracy that applies to the shunt circuit.
This property only applies to devices that have a selectable shunt
voltage range via PGA or ADCRANGE register configuration.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211102052754.817220-2-nathan@nathanrossi.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Document the compatible string for the Texas Instruments INA238, this
device is a variant of the existing INA2xx devices and has the same
device tree bindings (shunt resistor).
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211102052754.817220-1-nathan@nathanrossi.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add thermal info support for AMD Family 19h Models 10h-1Fh and A0h-AFh.
Thermal info is supported via a new PCI device ID at offset 0x300h.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163640829419.955062.12539219969781039915.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Usage of these definitions were removed after the commit 0a4e668b
("hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs").
So, cleanup them up.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163640828776.955062.15863375803675701204.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add the new PCI Device IDs to support new generation of AMD 19h family of
processors.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>  # pci_ids.h
Link: https://lore.kernel.org/r/163640828133.955062.18349019796157170473.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull x86 fixes from Borislav Petkov:

 - Prevent potential undefined behavior due to shifting pkey constants
   into the sign bit

 - Move the EFI memory reservation code *after* the efi= cmdline parsing
   has happened

 - Revert two commits which turned out to be the wrong direction to
   chase when accommodating early memblock reservations consolidation
   and command line parameters parsing

* tag 'x86_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkey: Fix undefined behaviour with PKRU_WD_BIT
  x86/boot: Move EFI range reservation after cmdline parsing
  Revert "x86/boot: Pull up cmdline preparation and early param parsing"
  Revert "x86/boot: Mark prepare_command_line() __init"

Pull objtool fixes from Borislav Petkov:

 - Prevent clang from reordering the reachable annotation in
   an inline asm statement without inputs

 - Fix objtool builds on non-glibc systems due to undefined
   __always_inline

* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compiler.h: Fix annotation macro misplacement with Clang
  uapi: Fix undefined __always_inline on non-glibc systems

Pull pin control fixes from Linus Walleij:
 "Some hopefully final pin control fixes for the v5.16 kernel:

   - Fix an out-of-bounds bug in the Mediatek driver

   - Fix an init order bug in the Broadcom BCM2835 driver

   - Fix a GPIO offset bug in the STM32 driver"

* tag 'pinctrl-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
  pinctrl: bcm2835: Change init order for gpio hogs
  pinctrl: mediatek: fix global-out-of-bounds issue

Merge tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "A couple of lm90 driver fixes. None of them are critical, but they
  should nevertheless be fixed"

* tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (lm90) Do not report 'busy' status bit as alarm
  hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
  hwmon: (lm90) Drop critical attribute support for MAX6654
  hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
  hwmon: (lm90) Fix usage of CONFIG2 register in detect function

Pull input fixes from Dmitry Torokhov:
 "A few small updates to drivers.

  Of note we are now deferring probes of i8042 on some Asus devices as
  the controller is not ready to respond to queries first time around
  when the driver is compiled into the kernel"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
  Input: atmel_mxt_ts - fix double free in mxt_read_info_block
  Input: goodix - fix memory leak in goodix_firmware_upload
  Input: goodix - add id->model mapping for the "9111" model
  Input: goodix - try not to touch the reset-pin on x86/ACPI devices
  Input: i8042 - enable deferred probe quirk for ASUS UM325UA
  Input: elantech - fix stack out of bound access in elantech_change_report_id()
  Input: iqs626a - prohibit inlining of channel parsing functions
  Input: i8042 - add deferred probe support

Merge misc fixes from Andrew Morton:
 "9 patches.

  Subsystems affected by this patch series: mm (kfence, mempolicy,
  memory-failure, pagemap, pagealloc, damon, and memory-failure),
  core-kernel, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
  mm/damon/dbgfs: protect targets destructions with kdamond_lock
  mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
  mm: delete unsafe BUG from page_cache_add_speculative()
  mm, hwpoison: fix condition in free hugetlb page path
  MAINTAINERS: mark more list instances as moderated
  kernel/crash_core: suppress unknown crashkernel parameter warning
  mm: mempolicy: fix THP allocations escaping mempolicy restrictions
  kfence: fix memory leak when cat kfence objects

Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE.  The BUG() is triggered when retrying
get_any_page().  This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.

    page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
    ------------[ cut here ]------------
    kernel BUG at include/linux/mm.h:737!
    invalid opcode: 0000 [#1] PREEMPT SMP
    CPU: 5 PID: 2135 Comm: sshd Tainted: G    B             5.16.0-rc6-dirty #373
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
    RIP: release_pages+0x53f/0x840
    Call Trace:
      free_pages_and_swap_cache+0x64/0x80
      tlb_flush_mmu+0x6f/0x220
      unmap_page_range+0xe6c/0x12c0
      unmap_single_vma+0x90/0x170
      unmap_vmas+0xc4/0x180
      exit_mmap+0xde/0x3a0
      mmput+0xa3/0x250
      do_exit+0x564/0x1470
      do_group_exit+0x3b/0x100
      __do_sys_exit_group+0x13/0x20
      __x64_sys_exit_group+0x16/0x20
      do_syscall_64+0x34/0x80
      entry_SYSCALL_64_after_hwframe+0x44/0xae
    Modules linked in:
    ---[ end trace e99579b570fe0649 ]---
    RIP: 0010:release_pages+0x53f/0x840

Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes: b94e0282 ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'.  However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock.  This can result in
a use_after_free bug.  This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.

Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.orgReported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes: 4bc05954 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The second parameter of alloc_pages_exact_nid is the one indicating the
size of memory pointed by the returned pointer.

Link: https://lkml.kernel.org/r/YbjEgwhn4bGblp//@coeus
Fixes: abd58f38 ("mm/page_alloc: add __alloc_size attributes for better bounds checking")
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Levente Polyak <levente@leventepolyak.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is not easily reproducible, but on 5.16-rc I have several times hit
the VM_BUG_ON_PAGE(PageTail(page), page) in
page_cache_add_speculative(): usually from filemap_get_read_batch() for
an ext4 read, yesterday from next_uptodate_page() from
filemap_map_pages() for a shmem fault.

That BUG used to be placed where page_ref_add_unless() had succeeded,
but now it is placed before folio_ref_add_unless() is attempted: that is
not safe, since it is only the acquired reference which makes the page
safe from racing THP collapse or split.

We could keep the BUG, checking PageTail only when
folio_ref_try_add_rcu() has succeeded; but I don't think it adds much
value - just delete it.

Link: https://lkml.kernel.org/r/8b98fc6f-3439-8614-c3f3-945c659a1aba@google.com
Fixes: 020853b6 ("mm: Add folio_try_get_rcu()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a memory error hits a tail page of a free hugepage,
__page_handle_poison() is expected to be called to isolate the error in
4kB unit, but it's not called due to the outdated if-condition in
memory_failure_hugetlb().  This loses the chance to isolate the error in
the finer unit, so it's not optimal.  Drop the condition.

This "(p != head && TestSetPageHWPoison(head)" condition is based on the
old semantics of PageHWPoison on hugepage (where PG_hwpoison flag was
set on the subpage), so it's not necessray any more.  By getting to set
PG_hwpoison on head page for hugepages, concurrent error events on
different subpages in a single hugepage can be prevented by
TestSetPageHWPoison(head) at the beginning of memory_failure_hugetlb().
So dropping the condition should not reopen the race window originally
mentioned in commit b985194c ("hwpoison, hugetlb:
lock_page/unlock_page does not match for handling a free hugepage")

[naoya.horiguchi@linux.dev: fix "HardwareCorrupted" counter]
  Link: https://lkml.kernel.org/r/20211220084851.GA1460264@u2004

Link: https://lkml.kernel.org/r/20211210110208.879740-1-naoya.horiguchi@linux.devSigned-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Fei Luo <luofei@unicloud.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>	[5.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some lists that are moderated are not marked as moderated consistently,
so mark them all as moderated.

Link: https://lkml.kernel.org/r/20211209001330.18558-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Conor Culhane <conor.culhane@silvaco.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When booting with crashkernel= on the kernel command line a warning
similar to

    Kernel command line: ro console=ttyS0 crashkernel=256M
    Unknown kernel command line parameters "crashkernel=256M", will be passed to user space.

is printed.

This comes from crashkernel= being parsed independent from the kernel
parameter handling mechanism.  So the code in init/main.c doesn't know
that crashkernel= is a valid kernel parameter and prints this incorrect
warning.

Suppress the warning by adding a dummy early_param handler for
crashkernel=.

Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com
Fixes: 86d1919a ("init: print out unknown kernel parameters")
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alloc_pages_vma() may try to allocate THP page on the local NUMA node
first:

	page = __alloc_pages_node(hpage_node,
		gfp | __GFP_THISNODE | __GFP_NORETRY, order);

And if the allocation fails it retries allowing remote memory:

	if (!page && (gfp & __GFP_DIRECT_RECLAIM))
    		page = __alloc_pages_node(hpage_node,
					gfp, order);

However, this retry allocation completely ignores memory policy nodemask
allowing allocation to escape restrictions.

The first appearance of this bug seems to be the commit ac5b2c18
("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings").

The bug disappeared later in the commit 89c83fb5 ("mm, thp:
consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") and
reappeared again in slightly different form in the commit 76e654cc
("mm, page_alloc: allow hugepage fallback to remote nodes when
madvised")

Fix this by passing correct nodemask to the __alloc_pages() call.

The demonstration/reproducer of the problem:

    $ mount -oremount,size=4G,huge=always /dev/shm/
    $ echo always > /sys/kernel/mm/transparent_hugepage/defrag
    $ cat mbind_thp.c
    #include <unistd.h>
    #include <sys/mman.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <assert.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <numaif.h>

    #define SIZE 2ULL << 30
    int main(int argc, char **argv)
    {
        int fd;
        unsigned long long i;
        char *addr;
        pid_t pid;
        char buf[100];
        unsigned long nodemask = 1;

        fd = open("/dev/shm/test", O_RDWR|O_CREAT);
        assert(fd > 0);
        assert(ftruncate(fd, SIZE) == 0);

        addr = mmap(NULL, SIZE, PROT_READ|PROT_WRITE,
                           MAP_SHARED, fd, 0);

        assert(mbind(addr, SIZE, MPOL_BIND, &nodemask, 2, MPOL_MF_STRICT|MPOL_MF_MOVE)==0);
        for (i = 0; i < SIZE; i+=4096) {
          addr[i] = 1;
        }
        pid = getpid();
        snprintf(buf, sizeof(buf), "grep shm /proc/%d/numa_maps", pid);
        system(buf);
        sleep(10000);

        return 0;
    }
    $ gcc mbind_thp.c -o mbind_thp -lnuma
    $ numactl -H
    available: 2 nodes (0-1)
    node 0 cpus: 0 2
    node 0 size: 1918 MB
    node 0 free: 1595 MB
    node 1 cpus: 1 3
    node 1 size: 2014 MB
    node 1 free: 1731 MB
    node distances:
    node   0   1
      0:  10  20
      1:  20  10
    $ rm -f /dev/shm/test; taskset -c 0 ./mbind_thp
    7fd970a00000 bind:0 file=/dev/shm/test dirty=524288 active=0 N0=396800 N1=127488 kernelpagesize_kB=4

Link: https://lkml.kernel.org/r/20211208165343.22349-1-arbn@yandex-team.com
Fixes: ac5b2c18 ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Hulk robot reported a kmemleak problem:

    unreferenced object 0xffff93d1d8cc02e8 (size 248):
      comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
      hex dump (first 32 bytes):
        00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00  .@..............
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      backtrace:
         seq_open+0x2a/0x80
         full_proxy_open+0x167/0x1e0
         do_dentry_open+0x1e1/0x3a0
         path_openat+0x961/0xa20
         do_filp_open+0xae/0x120
         do_sys_openat2+0x216/0x2f0
         do_sys_open+0x57/0x80
         do_syscall_64+0x33/0x40
         entry_SYSCALL_64_after_hwframe+0x44/0xa9
    unreferenced object 0xffff93d419854000 (size 4096):
      comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
      hex dump (first 32 bytes):
        6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30  kfence-#250: 0x0
        30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d  0000000754bda12-
      backtrace:
         seq_read_iter+0x313/0x440
         seq_read+0x14b/0x1a0
         full_proxy_read+0x56/0x80
         vfs_read+0xa5/0x1b0
         ksys_read+0xa0/0xf0
         do_syscall_64+0x33/0x40
         entry_SYSCALL_64_after_hwframe+0x44/0xa9

I find that we can easily reproduce this problem with the following
commands:

	cat /sys/kernel/debug/kfence/objects
	echo scan > /sys/kernel/debug/kmemleak
	cat /sys/kernel/debug/kmemleak

The leaked memory is allocated in the stack below:

    do_syscall_64
      do_sys_open
        do_dentry_open
          full_proxy_open
            seq_open            ---> alloc seq_file
      vfs_read
        full_proxy_read
          seq_read
            seq_read_iter
              traverse          ---> alloc seq_buf

And it should have been released in the following process:

    do_syscall_64
      syscall_exit_to_user_mode
        exit_to_user_mode_prepare
          task_work_run
            ____fput
              __fput
                full_proxy_release  ---> free here

However, the release function corresponding to file_operations is not
implemented in kfence.  As a result, a memory leak occurs.  Therefore,
the solution to this problem is to implement the corresponding release
function.

Link: https://lkml.kernel.org/r/20211206133628.2822545-1-libaokun1@huawei.com
Fixes: 0ce20dd8 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:

 - fix nommu after getting rid of mini-stack for ARMv7

 - fix Thumb2 bug in iWMMXt exception handling

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling
  ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC

Merge tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Various bug-fixes"

* tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: intel_pmc_core: fix memleak on registration failure
  platform/x86/intel: Remove X86_PLATFORM_DRIVERS_INTEL
  platform/x86: system76_acpi: Guard System76 EC specific functionality
  platform/x86: apple-gmux: use resource_size() with res
  platform/x86: amd-pmc: only use callbacks for suspend
  platform/mellanox: mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters

Pull ksmbd fixes from Steve French:
 "Three ksmbd fixes, all for stable as well.

  Two fix potential unitialized memory and one fixes a security problem
  where encryption is unitentionally disabled from some clients"

* tag '5.16-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: disable SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
  ksmbd: fix uninitialized symbol 'pntsd_size'
  ksmbd: fix error code in ndr_read_int32()

Pull drm fixes from Dave Airlie:
 "Happy Xmas. Nothing major, one mediatek and a couple of i915 locking
  fixes. There might be a few stragglers over next week or so but I
  don't expect much before next release.

  mediatek:
   - NULL pointer check

  i915:
   - guc submission locking fixes"

* tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/guc: Only assign guc_id.id when stealing guc_id
  drm/i915/guc: Use correct context lock when callig clr_context_registered
  drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

Pull io_uring fix from Jens Axboe:
 "Single fix for not clearing kiocb->ki_pos back to 0 for a stream,
  destined for stable as well"

* tag 'io_uring-5.16-2021-12-23' of git://git.kernel.dk/linux-block:
  io_uring: zero iocb->ki_pos for stream file types

Merge branch 'ucount-rlimit-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucount fix from Eric Biederman:
 "This fixes a silly logic bug in the ucount rlimits code, where it was
  comparing against the wrong limit"

* 'ucount-rlimit-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Fix rlimit max values check

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - revert "tipc: use consistent GFP flags"

  Previous releases - regressions:

   - igb: fix deadlock caused by taking RTNL in runtime resume path

   - accept UFOv6 packages in virtio_net_hdr_to_skb

   - netfilter: fix regression in looped (broad|multi)cast's MAC
     handling

   - bridge: fix ioctl old_deviceless bridge argument

   - ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor,
     avoid stalls when multiple sockets use an interface

  Previous releases - always broken:

   - inet: fully convert sk->sk_rx_dst to RCU rules

   - veth: ensure skb entering GRO are not cloned

   - sched: fix zone matching for invalid conntrack state

   - bonding: fix ad_actor_system option setting to default

   - nf_tables: fix use-after-free in nft_set_catchall_destroy()

   - lantiq_xrx200: increase buffer reservation to avoid mem corruption

   - ice: xsk: avoid leaking app buffers during clean up

   - tun: avoid double free in tun_free_netdev"

* tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
  r8152: sync ocp base
  r8152: fix the force speed doesn't work for RTL8156
  net: bridge: fix ioctl old_deviceless bridge argument
  net: stmmac: ptp: fix potentially overflowing expression
  net: dsa: tag_ocelot: use traffic class to map priority on injected header
  veth: ensure skb entering GRO are not cloned.
  asix: fix wrong return value in asix_check_host_enable()
  asix: fix uninit-value in asix_mdio_read()
  sfc: falcon: Check null pointer of rx_queue->page_ring
  sfc: Check null pointer of rx_queue->page_ring
  net: ks8851: Check for error irq
  drivers: net: smc911x: Check for error irq
  fjes: Check for error irq
  bonding: fix ad_actor_system option setting to default
  igb: fix deadlock caused by taking RTNL in RPM resume path
  gve: Correct order of processing device options
  net: skip virtio_net_hdr_set_proto if protocol already set
  net: accept UFOv6 packages in virtio_net_hdr_to_skb
  docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
  ...

In case device registration fails during module initialisation, the
platform device structure needs to be freed using platform_device_put()
to properly free all resources (e.g. the device name).

Fixes: 938835aa ("platform/x86: intel_pmc_core: do not create a static struct device")
Cc: stable@vger.kernel.org      # 5.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a
value, which is 0. Fix from BIT(0) to 0.
Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Fixes: b38dd98f ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>