- 14 Feb, 2023 6 commits
-
-
Veerendranath Jakkam authored
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Veerendranath Jakkam authored
Add support for drivers to indicate STA connection(MLO/non-MLO) when user space SME (e.g., hostapd) is not used for MLD AP. Add new parameters in struct station_info to provide below information in cfg80211_new_sta() call: - MLO link ID of the AP, with which station completed (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. - (Re)Association Response IEs sent to the station. User space needs this to determine rejected and accepted affiliated links information of the connected station if the connection is MLO capable. Signed-off-by:
-
Lorenzo Bianconi authored
Move color collision report in a dedicated delayed work and do not run it in interrupt context in order to rate-limit the number of events reported to userspace. Moreover grab wdev mutex in ieee80211_color_collision_detection_work routine since it is required by cfg80211_obss_color_collision_notify(). Tested-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Fixes: 5f9404ab ("mac80211: add support for BSS color change") Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.orgSigned-off-by:
-
Alexander Wetzel authored
Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work. Fixes: fffd0934 ("cfg80211: rework key operation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.deSigned-off-by:
Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by:
-
Veerendranath Jakkam authored
Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by:
-
Johannes Berg authored
With %pM, this really is no longer needed, and actually longer to spell out. Remove it. Signed-off-by:
-
- 13 Feb, 2023 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v6.3. Major changes: ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table
-
Tom Rix authored
building with W=2 has these errors redundant redeclaration of ‘zd_rf_generic_patch_6m’ [-Werror=redundant-decls] redundant redeclaration of ‘zd_rf_patch_6m_band_edge’ [-Werror=redundant-decls] Remove the second decls. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204200902.1709343-1-trix@redhat.com
-
Ping-Ke Shih authored
Type of txdw7 is __le16, so assign __le32 is wrong. Also, the TXDESC_ANTENNA_SELECT_C is defined for __le32, so shift 16 bits to fit the value. Compile test only. sparse warnings: (new ones prefixed by >>) >> rtl8xxxu_core.c:5198:24: sparse: sparse: invalid assignment: |= >> rtl8xxxu_core.c:5198:24: sparse: left side has type restricted __le16 >> rtl8xxxu_core.c:5198:24: sparse: right side has type restricted __le32 Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Tested-by:
Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by:
-
Bitterblue Smith authored
By default the LED will blink when there is some activity. This is only compile tested. Signed-off-by:
-
Bitterblue Smith authored
By default the LED will blink when there is some activity. This was tested with a cheap "HT-WR813" from Aliexpress. Signed-off-by:
-
Bitterblue Smith authored
By default the LED will blink when there is some activity. This was tested with a TP-Link TL-WN725N. Signed-off-by:
-
Bitterblue Smith authored
If the chip can have an LED, register a struct led_classdev and enable hardware-controlled blinking. When the chip is not transmitting or receiving anything the LED is off. Otherwise the LED will blink faster or slower according to the throughput. The LED can be controlled from userspace by writing 0, 1, or 2 to /sys/class/leds/rtl8xxxu-usbX-Y/brightness: 0 - solid off. 1 - solid on. 2 - hardware-controlled blinking. In this patch none of the chips advertise having an LED. That will be added in the next patches. Signed-off-by:
-
Peter Lafreniere authored
Macros prefixed with CONFIG_ are intended to be defined only by Kconfig scripts. Here we remove the prefix from the CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code. This causes no change to functionality. Signed-off-by:
Peter Lafreniere <peter@n8pjl.ca> Signed-off-by:
-
Zong-Zhe Yang authored
Previously, all supported chips had two RF paths. Therefore, these codes used static number for TX power setting. Now, we are planning to support a new chip which has only one RF path. So, we refine the setting codes to refer to chip's RF path number at runtime. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
For a packet with 1SS rate, it can also transmit via 2 antenna, called 2T mode. For 2T TX power offset, mask should be 2T as well. Fortunately, the mask of 2T and 1T are the same, so it can still work well without this fix. Signed-off-by:
-
Zong-Zhe Yang authored
In path of setting channel and setting TX power, the rtw89_chan instance to be used is controlled by top and passed down. The set_tx_shape_dfir() is in path of setting TX power, so it should use the passed rtw89_chan instead of querying it itself. Otherwise, it might encounter mismatch between parameters if multi-channel. For example, rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz Signed-off-by:
-
Chin-Yen Lee authored
Enable CLKREQ to reduce power consumption for 8852BE. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type can still work well. The use of this new type is the same as before, so we add new type to avoid taking wrong firmware. Then, driver log can also give clear information about this change: rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 Signed-off-by:
-
Ping-Ke Shih authored
Due to firmware size limit of 8852b, LPS-PG mode isn't supported after 0.29.26.0, and then we have more space to support other features, such as P2P-PS, hardware scan and so on. Signed-off-by:
-
Ping-Ke Shih authored
For different firmware type, it could use different IDMEM mode, so reset it to default to avoid encountering error during we bisect firmware version, like rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 rtw89_8852be 0000:03:00.0: fw security fail rtw89_8852be 0000:03:00.0: download firmware fail rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62 rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 Signed-off-by:
-
Ping-Ke Shih authored
Driver can prepare pkt_list for firmware that only uses them to send out the packets in specific situations. To understand the usage of current status, and to check if there is leakage problem, dump bitmap and the indices used by certain function. An example looks like: map: ... pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... [SCAN 0]: 3 [SCAN 1]: 4 [SCAN 3]: 5 VIF [0] xx:xx:xx:xx:xx:xx ... pkt_ofld[GENERAL]: 0 1 2 Signed-off-by: -
Chin-Yen Lee authored
For upcoming firmware, driver needs to do packet offload to firmware to ensure LPS protocol work properly, so we update current connection and disconnect flow to maintain packet offload flow, and integrate with current WoWLAN flow which also needs packet offload. Signed-off-by:
-
Chin-Yen Lee authored
When driver fails to send H2C to firmware for pkt-offload, we should not update the pkt_list of driver, and need to release allocated pkt index to avoid wrong mapping between driver and firmware. Signed-off-by:
-
Kuan-Chung Chen authored
Buffer STA on TDLS links are not currently supported. Therefore, it is not allowed to enter the PS mode after TDLS link is established. Signed-off-by:
Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
To debug channel concurrency more centrally, we add a new debug flag, RTW89_DBG_CHAN, for channel related things, especially channel concurrency. Then, we change MCC (multi-channel concurrency) C2H (chip to host packets) debug flag to it. Besides, refine debug logs to show TSF in u64 directly. Signed-off-by:
-
Zong-Zhe Yang authored
A 8-byte offset is missed during parsing C2Hs (chip to host packets) of MCC (multi-channel concurrent) series. So, we fix it. Fixes: ef9dff4c ("wifi: rtw89: mac: process MCC related C2H") Signed-off-by:
-
Zong-Zhe Yang authored
RXI300 is a HW design to maintain stuffs across BUS, e.g. AXI, AHB, APB. It will feedback an error when host does an invalid BUS operation. For example, * BUS master request without power/clock on. * host reads/writes/accesses an invalid address. They might lead to problems such as BUS timeout, platform hang, etc. So, once if RXI300 feedback an error, it notifies that driver need a L2 SER (system error recovery) to reset things. Previously, driver did not parse the error scenario for RXI300. We add it and assign a corresponding error code which will make SER flow do L2 reset. Signed-off-by:
-
Zong-Zhe Yang authored
Only 8852C chip has valid pages on RTW89_DBG_SEL_MAC_30. To other chips, this section is an address hole. It will lead to crash if trying to access this section on chips except for 8852C. So, we avoid that. Signed-off-by:
-
Zong-Zhe Yang authored
Add mac function rtw89_mac_port_get_tsf() to get TSF by port. It will be used when MCC (multi-channel concurrency) calculates timing things. Signed-off-by:
-
Zong-Zhe Yang authored
Originally, rtw89_mac_port_tsf_sync() contains randomization logic internally. However, not all situation, we need the randomization. So, split out the generic part from it. And, make the full logic of original one contained in rtw89_mac_port_tsf_sync_rand(). It will still be used by its original caller as before. Then, the generic one will be used in MCC (multi-channel concurrency) management flow. MCC will implement its logic to decide the offset for TSF sync. Signed-off-by:
-
Zong-Zhe Yang authored
Strictly speaking, the unit of the offset should be TU instead of ms. So, correct it and the macro for calculation. Then, to make the macro generic, the factor n is moved outside. Signed-off-by:
-
Ching-Te Ku authored
Should update the driver with the supported firmware version of the below item. Bluetooth firmware BT_Coex_Ver: 0x07 Wi-Fi firmware version: RTL8852C->v0.27.56.10, RTL8852A->v0.24.36 Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
The origin code will enable TDMA WL:BT = 50:50 to prevent Wi-Fi throughput suddenly drop to 0 in the moment while A2DP pause. And this protection just a short moment, and will turn to Bluetooth idle case when A2DP turn into sniff mode. But the raspberryPI simulated A2DP device will not turn into sniff mode. So the protection will bring the throughput drop. Signed-off-by:
-
Ching-Te Ku authored
When Wi-Fi enter and leave LPS, coexistence driver need to know is there A2DP exist or not. And when Wi-Fi sleep in deep power save state will not able to receive mailbox sent from Bluetooth. So update the A2DP exist information from reading register. Signed-off-by:
-
Ching-Te Ku authored
When Wi-Fi is RX, set Bluetooth background scan to low-priority and not to break Wi-Fi packet. Bluetooth can RX depend on hardware ability even RX request has been rejected. This way can improve Wi-Fi RX throughput performance. Signed-off-by:
-
Ching-Te Ku authored
Adjust the log format and correct variable reference to make the log more readable. Signed-off-by:
-
Ching-Te Ku authored
Force firmware to update TDMA parameter when enter/exit power saving. The TDMA instant feature will make firmware force update TDMA parameter immediately when the TDMA parameter H2C to firmware. Without this feature, it will have a low fail rate trigger Bluetooth audio sound glitch when Wi-Fi is under power saving. Or Wi-Fi fail to turn in to power save state. Signed-off-by:
-
Ching-Te Ku authored
Reset the counter no matter Wi-Fi is notified turning into power save or not. With rest the counter coexistence will recognize Bluetooth is hanged easily. Signed-off-by:
-
Ching-Te Ku authored
This patch update the external control (Wi-Fi firmware control) type of TDMA related parameters, almost all of these case were related to Wi-Fi multi-role situations & AP mode. Signed-off-by:
-
