earlyprintk is architecture specific option.
earlycon is generic and small footprint.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.6-rc1.

  Lots of little things here, over 1600 patches or so.  Notable is all
  of the good Lustre work happening, those developers have finally woken
  up and are cleaning up their code greatly.  The Outreachy intern
  application process is also happening, which brought in another 400 or
  so patches.  Full details are in the very long shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
  staging: lustre: fix aligments in lnet selftest
  staging: lustre: report minimum of two buffers for LNet selftest load test
  staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
  staging: lustre: filter remaining extra spacing for lnet selftest
  staging: lustre: remove extra spacing when setting variable for lnet selftest
  staging: lustre: remove extra spacing of variable declartions for lnet selftest
  staging: lustre: fix spacing issues checkpatch reported in lnet selftest
  staging: lustre: remove returns in void function for lnet selftest
  staging: lustre: fix bogus lst errors for lnet selftest
  staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
  staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
  staging: android: ion: fix up file mode
  staging: ion: debugfs invalid gfp mask
  staging: rts5208: Replace pci_enable_device with pcim_enable_device
  Staging: ieee80211: Place constant on right side of the test.
  staging: speakup: Replace del_timer with del_timer_sync
  staging: lowmemorykiller: fix 2 checks that checkpatch complained
  staging: mt29f_spinand: Drop void pointer cast
  staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
  staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
  ...

Pull input updates from Dmitry Torokhov:
 "The most notable item is addition of support for Synaptics RMI4
  protocol which is native protocol for all current Synaptics devices
  (touchscreens, touchpads).  In later releases we'll switch devices
  using HID and PS/2 protocol emulation to RMI4.

  You will also get:
   - BYD PS/2 touchpad protocol support for psmouse
   - MELFAS MIP4 Touchscreen driver
   - rotary encoder was moved away from legacy platform data and to
     generic device properties API, devm_* API, and can now handle
     encoders using more than 2 GPIOs
   - Cypress touchpad driver was switched to devm_* API and device
     properties
   - other assorted driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props
  Input: synaptics-rmi4 - using logical instead of bitwise AND
  Input: powermate - fix oops with malicious USB descriptors
  Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle()
  MAINTAINERS: add devicetree bindings to Input Drivers section
  Input: synaptics-rmi4 - add device tree support to the SPI transport driver
  Input: synaptics-rmi4 - add SPI transport driver
  Input: synaptics-rmi4 - add support for F30
  Input: synaptics-rmi4 - add support for F12
  Input: synaptics-rmi4 - add device tree support for 2d sensors and F11
  Input: synaptics-rmi4 - add support for 2D sensors and F11
  Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices
  Input: synaptics-rmi4 - add I2C transport driver
  Input: synaptics-rmi4 - add support for Synaptics RMI4 devices
  Input: ad7879 - add device tree support
  Input: ad7879 - fix default x/y axis assignment
  Input: ad7879 - move header to platform_data directory
  Input: ts4800 - add hardware dependency
  Input: cyapa - fix for losing events during device power transitions
  Input: sh_keysc - remove dependency on SUPERH
  ...

Pull livepatching update from Jiri Kosina:

 - cleanup of module notifiers; this depends on a module.c cleanup which
   has been acked by Rusty; from Jessica Yu

 - small assorted fixes and MAINTAINERS update

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch/module: remove livepatch module notifier
  modules: split part of complete_formation() into prepare_coming_module()
  livepatch: Update maintainers
  livepatch: Fix the error message about unresolvable ambiguity
  klp: remove CONFIG_LIVEPATCH dependency from klp headers
  klp: remove superfluous errors in asm/livepatch.h

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  drivers/rtc: broken link fix
  drm/i915 Fix typos in i915_gem_fence.c
  Docs: fix missing word in REPORTING-BUGS
  lib+mm: fix few spelling mistakes
  MAINTAINERS: add git URL for APM driver
  treewide: Fix typo in printk

Pull HID updates from Jiri Kosina:

 - functionally equivalent cleanups for wacom driver, making the code
   more readable, from Benjamin Tissoires

 - a bunch of improvements and fixes for thingm driver from Heiner
   Kallweit

 - bugfixes to out-of-bound access for generic parsing functions (which
   have been there since ever) extract() and implement(), from Dmitry
   Torokhov

 - a lot of added / improved device support in sony, wacom, microsoft,
   multitouch and logitech driver, from various people

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (44 commits)
  HID: microsoft: Add ID for MS Wireless Comfort Keyboard
  hid: thingm: reorder calls in thingm_probe
  HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report()
  HID: multitouch: Release all touch slots on reset_resume
  HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard2
  HID: penmount: report only one button for PenMount 6000 USB touchscreen controller
  HID: i2c-hid: Fix suspend/resume when already runtime suspended
  HID: i2c-hid: Add hid-over-i2c name to i2c id table
  HID: multitouch: force retrieving of Win8 signature blob
  HID: Support for CMedia CM6533 HID audio jack controls
  HID: thingm: improve locking
  HID: thingm: switch to managed version of led_classdev_register
  HID: thingm: remove workqueue
  HID: corsair: fix mapping of non-keyboard usages
  HID: wacom: close the wireless receiver on remove()
  HID: wacom: cleanup input devices
  HID: wacom: reuse wacom_parse_and_register() in wireless_work
  HID: wacom: move down wireless_work()
  HID: wacom: break out parsing of device and registering of input
  HID: wacom: break out wacom_intuos_get_tool_type
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel v4.6.  There is quite a
  lot of interesting stuff going on.

  The patches to other subsystems and arch-wide are ACKed as far as
  possible, though I consider things like per-arch <asm/gpio.h> as
  essentially a part of the GPIO subsystem so it should not be needed.

  Core changes:

   - The gpio_chip is now a *real device*.  Until now the gpio chips
     were just piggybacking the parent device or (gasp) floating in
     space outside of the device model.

     We now finally make GPIO chips devices.  The gpio_chip will create
     a gpio_device which contains a struct device, and this gpio_device
     struct is kept private.  Anything that needs to be kept private
     from the rest of the kernel will gradually be moved over to the
     gpio_device.

   - As a result of making the gpio_device a real device, we have added
     resource management, so devm_gpiochip_add_data() will cut down on
     overhead and reduce code lines.  A huge slew of patches convert
     almost all drivers in the subsystem to use this.

   - Building on making the GPIO a real device, we add the first step of
     a new userspace ABI: the GPIO character device.  We take small
     steps here, so we first add a pure *information* ABI and the tool
     "lsgpio" that will list all GPIO devices on the system and all
     lines on these devices.

     We can now discover GPIOs properly from userspace.  We still have
     not come up with a way to actually *use* GPIOs from userspace.

   - To encourage people to use the character device for the future, we
     have it always-enabled when using GPIO.  The old sysfs ABI is still
     opt-in (and can be used in parallel), but is marked as deprecated.

     We will keep it around for the foreseeable future, but it will not
     be extended to cover ever more use cases.

  Cleanup:

   - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h>
     includes.

     This dates back to when GPIO was an opt-in feature and no shared
     library even existed: just a header file with proper prototypes was
     provided and all semantics were up to the arch to implement.  These
     patches make the GPIO chip even more a proper device and cleans out
     leftovers of the old in-kernel API here and there.

     Still some cruft is left but it's very little now.

   - There is still some clamping of return values for .get() going on,
     but we now return sane values in the vast majority of drivers and
     the errorpath is sanitized.  Some patches for powerpc, blackfin and
     unicore still drop in.

   - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO
     implementations to use gpiochip_add_data() and cut down on code
     lines.

   - MPC8xxx is converted to use the generic GPIO helpers.

   - ATH79 is converted to use the generic GPIO helpers.

  New drivers:

   - WinSystems WS16C48

   - Acces 104-DIO-48E

   - F81866 (a F7188x variant)

   - Qoric (a MPC8xxx variant)

   - TS-4800

   - SPI serializers (pisosr): simple 74xx shift registers connected to
     SPI to obtain a dirt-cheap output-only GPIO expander.

   - Texas Instruments TPIC2810

   - Texas Instruments TPS65218

   - Texas Instruments TPS65912

   - X-Gene (ARM64) standby GPIO controller"

* tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits)
  Revert "Share upstreaming patches"
  gpio: mcp23s08: Fix clearing of interrupt.
  gpiolib: Fix comment referring to gpio_*() in gpiod_*()
  gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
  gpio: xgene: Fix kconfig for standby GIPO contoller
  gpio: Add generic serializer DT binding
  gpio: uapi: use 0xB4 as ioctl() major
  gpio: tps65912: fix bad merge
  Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
  gpio: omap: drop dev field from gpio_bank structure
  gpio: mpc8xxx: Slightly update the code for better readability
  gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
  gpio: mpc8xxx: Fixup setting gpio direction output
  gpio: mcp23s08: Add support for mcp23s18
  dt-bindings: gpio: altera: Fix altr,interrupt-type property
  gpio: add driver for MEN 16Z127 GPIO controller
  gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
  gpio: timberdale: Switch to devm_ioremap_resource()
  gpio: ts4800: Add IMX51 dependency
  gpiolib: rewrite gpiodev_add_to_list
  ...

Pull m68knommu updates from Greg Ungerer:
 "The main change is the removal of the bit-rotten 68360 support.  Also
  a fix to always make the ethernet FEC platform info available"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: remove obsolete 68360 support
  m68knommu: fix FEC platform device registration when driver is modular

Pull arm64 updates from Catalin Marinas:
 "Here are the main arm64 updates for 4.6.  There are some relatively
  intrusive changes to support KASLR, the reworking of the kernel
  virtual memory layout and initial page table creation.

  Summary:

   - Initial page table creation reworked to avoid breaking large block
     mappings (huge pages) into smaller ones.  The ARM architecture
     requires break-before-make in such cases to avoid TLB conflicts but
     that's not always possible on live page tables

   - Kernel virtual memory layout: the kernel image is no longer linked
     to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom
     of the vmalloc space, allowing the kernel to be loaded (nearly)
     anywhere in physical RAM

   - Kernel ASLR: position independent kernel Image and modules being
     randomly mapped in the vmalloc space with the randomness is
     provided by UEFI (efi_get_random_bytes() patches merged via the
     arm64 tree, acked by Matt Fleming)

   - Implement relative exception tables for arm64, required by KASLR
     (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c
     but actual x86 conversion to deferred to 4.7 because of the merge
     dependencies)

   - Support for the User Access Override feature of ARMv8.2: this
     allows uaccess functions (get_user etc.) to be implemented using
     LDTR/STTR instructions.  Such instructions, when run by the kernel,
     perform unprivileged accesses adding an extra level of protection.
     The set_fs() macro is used to "upgrade" such instruction to
     privileged accesses via the UAO bit

   - Half-precision floating point support (part of ARMv8.2)

   - Optimisations for CPUs with or without a hardware prefetcher (using
     run-time code patching)

   - copy_page performance improvement to deal with 128 bytes at a time

   - Sanity checks on the CPU capabilities (via CPUID) to prevent
     incompatible secondary CPUs from being brought up (e.g.  weird
     big.LITTLE configurations)

   - valid_user_regs() reworked for better sanity check of the
     sigcontext information (restored pstate information)

   - ACPI parking protocol implementation

   - CONFIG_DEBUG_RODATA enabled by default

   - VDSO code marked as read-only

   - DEBUG_PAGEALLOC support

   - ARCH_HAS_UBSAN_SANITIZE_ALL enabled

   - Erratum workaround Cavium ThunderX SoC

   - set_pte_at() fix for PROT_NONE mappings

   - Code clean-ups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits)
  arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
  arm64: kasan: Use actual memory node when populating the kernel image shadow
  arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
  arm64: Fix misspellings in comments.
  arm64: efi: add missing frame pointer assignment
  arm64: make mrs_s prefixing implicit in read_cpuid
  arm64: enable CONFIG_DEBUG_RODATA by default
  arm64: Rework valid_user_regs
  arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
  arm64: KVM: Move kvm_call_hyp back to its original localtion
  arm64: mm: treat memstart_addr as a signed quantity
  arm64: mm: list kernel sections in order
  arm64: lse: deal with clobbered IP registers after branch via PLT
  arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR
  arm64: kconfig: add submenu for 8.2 architectural features
  arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot
  arm64: Add support for Half precision floating point
  arm64: Remove fixmap include fragility
  arm64: Add workaround for Cavium erratum 27456
  arm64: mm: Mark .rodata as RO
  ...

Merge tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "This update for Kselftest adds:

   - A new feature to create test-specific kconfig fragments.  This
     feature helps configure Kselftests to test specific Kernel
     Configuration options as opposed to defconfig.

   - A new test for Media Controller API

   - A few fixes"

* tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: media_dcevice_test fix usage information
  selftests: media_dcevice_test fix to handle ioctl failure case
  selftests: add missing .gitignore file or entry
  Makefile: add kselftest-merge
  selftests: create test-specific kconfig fragments
  selftests: breakpoint: add step_after_suspend_test
  selftests: add a new test for Media Controller API

Pull pstore update from Tony Luck:
 "Allow ram backend to be configured with addresses above 4GB"

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: Add support for 64 Bit address space

Pull GFS2 updates from Bob Peterson:
 "We only have six patches ready for this merge window:

   - Arnd Bergmann contributed a patch that fixes an uninitialized
     variable warning.

   - The second patch avoids a kernel panic due to referencing an iopen
     glock that may not be held, in an error path.

   - The third patch fixes a rounding error that caused xfs_tests direct
     IO write "fsx" tests to fail on GFS2.

   - The fourth patch tidies up the code path when glocks are being
     reused to recreate a dinode that was recently deleted.

   - The fifth reverts an ages-old patch that should no longer be
     needed, and which interfered with the transition of dinodes from
     unlinked to free.

   - And lastly, a patch to eliminate a function parameter that's not
     needed"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Eliminate parameter non_block on gfs2_inode_lookup
  GFS2: Don't filter out I_FREEING inodes anymore
  GFS2: Prevent delete work from occurring on glocks used for create
  GFS2: Fix direct IO write rounding error
  gfs2: avoid uninitialized variable warning
  GFS2: Check if iopen is held when deleting inode

Pull dlm updates from David Teigland:
 "Previous changes introduced the use of socket error reporting for dlm
  sockets.  This set includes two fixes in how the socket error
  callbacks are used"

* tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  DLM: Save and restore socket callbacks properly
  DLM: Replace nodeid_to_addr with kernel_getpeername

Pull ext4 updates from Ted Ts'o:
 "Performance improvements in SEEK_DATA and xattr scalability
  improvements, plus a lot of clean ups and bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (38 commits)
  ext4: clean up error handling in the MMP support
  jbd2: do not fail journal because of frozen_buffer allocation failure
  ext4: use __GFP_NOFAIL in ext4_free_blocks()
  ext4: fix compile error while opening the macro DOUBLE_CHECK
  ext4: print ext4 mount option data_err=abort correctly
  ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
  ext4: drop unneeded BUFFER_TRACE in ext4_delete_inline_entry()
  ext4: fix misspellings in comments.
  jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
  ext4: more efficient SEEK_DATA implementation
  ext4: cleanup handling of bh->b_state in DAX mmap
  ext4: return hole from ext4_map_blocks()
  ext4: factor out determining of hole size
  ext4: fix setting of referenced bit in ext4_es_lookup_extent()
  ext4: remove i_ioend_count
  ext4: simplify io_end handling for AIO DIO
  ext4: move trans handling and completion deferal out of _ext4_get_block
  ext4: rename and split get blocks functions
  ext4: use i_mutex to serialize unaligned AIO DIO
  ext4: pack ioend structure better
  ...

Pull configfs updates from Christoph Hellwig:

 - A large patch from me to simplify setting up the list of default
   groups by actually implementing it as a list instead of an array.

 - a small Y2083 prep patch from Deepa Dinamani.  Probably doesn't
   matter on it's own, but it seems like he is trying to get rid of all
   CURRENT_TIME uses in file systems, which is a worthwhile goal.

* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
  configfs: switch ->default groups to a linked list
  configfs: Replace CURRENT_TIME by current_fs_time()

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.6-rc1.

  The normal mess is here, gadget and xhci fixes and updates, and lots
  of other driver updates and cleanups as well.  Full details are in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits)
  USB: core: let USB device know device node
  usb: devio: Add ioctl to disallow detaching kernel USB drivers.
  usb: gadget: f_acm: Fix configfs attr name
  usb: udc: lpc32xx: remove USB PLL and USB OTG clock management
  usb: udc: lpc32xx: remove direct access to clock controller registers
  usb: udc: lpc32xx: switch to clock prepare/unprepare model
  usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable()
  usb: gadget: renesas_usb3: Use ARCH_RENESAS
  usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma()
  usb: dwc2: Add support for Lantiq ARX and XRX SoCs
  usb: phy: generic: Handle late registration of gadget
  usb: gadget: bdc_udc: fix race condition in bdc_udc_exit()
  usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config
  usb: dwc2: Move host-specific core functions into hcd.c
  usb: dwc2: Move register save and restore functions
  usb: dwc2: Use kmem_cache_free()
  usb: dwc2: host: If using uframe scheduler, end splits better
  usb: dwc2: host: Totally redo the microframe scheduler
  usb: dwc2: host: Properly set even/odd frame
  usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call
  ...

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver pull request for 4.6-rc1.

  Lots of changes in here, Peter has been on a tear again, with lots of
  refactoring and bugs fixes, many thanks to the great work he has been
  doing.  Lots of driver updates and fixes as well, full details in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits)
  serial: 8250: describe CONFIG_SERIAL_8250_RSA
  serial: samsung: optimize UART rx fifo access routine
  serial: pl011: add mark/space parity support
  serial: sa1100: make sa1100_register_uart_fns a function
  tty: serial: 8250: add MOXA Smartio MUE boards support
  serial: 8250: convert drivers to use up_to_u8250p()
  serial: 8250/mediatek: fix building with SERIAL_8250=m
  serial: 8250/ingenic: fix building with SERIAL_8250=m
  serial: 8250/uniphier: fix modular build
  Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
  Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
  serial: mvebu-uart: initial support for Armada-3700 serial port
  serial: mctrl_gpio: Add missing module license
  serial: ifx6x60: avoid uninitialized variable use
  tty/serial: at91: fix bad offset for UART timeout register
  tty/serial: at91: restore dynamic driver binding
  serial: 8250: Add hardware dependency to RT288X option
  TTY, devpts: document pty count limiting
  tty: goldfish: support platform_device with id -1
  drivers: tty: goldfish: Add device tree bindings
  ...

Pull char/misc updates from Greg KH:
 "Here is the big char/misc driver update for 4.6-rc1.

  The majority of the patches here is hwtracing and some new mic
  drivers, but there's a lot of other driver updates as well.  Full
  details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits)
  goldfish: Fix build error of missing ioremap on UM
  nvmem: mediatek: Fix later provider initialization
  nvmem: imx-ocotp: Fix return value of imx_ocotp_read
  nvmem: Fix dependencies for !HAS_IOMEM archs
  char: genrtc: replace blacklist with whitelist
  drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
  drivers: char: mem: fix IS_ERROR_VALUE usage
  char: xillybus: Fix internal data structure initialization
  pch_phub: return -ENODATA if ROM can't be mapped
  Drivers: hv: vmbus: Support kexec on ws2012 r2 and above
  Drivers: hv: vmbus: Support handling messages on multiple CPUs
  Drivers: hv: utils: Remove util transport handler from list if registration fails
  Drivers: hv: util: Pass the channel information during the init call
  Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload()
  Drivers: hv: vmbus: remove code duplication in message handling
  Drivers: hv: vmbus: avoid wait_for_completion() on crash
  Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages
  misc: at24: replace memory_accessor with nvmem_device_read
  eeprom: 93xx46: extend driver to plug into the NVMEM framework
  eeprom: at25: extend driver to plug into the NVMEM framework
  ...

Pull driver core updates from Greg KH:
 "Just a few patches this time around for the 4.6-rc1 merge window.
  Largest is a new firmware driver, but there are some other updates to
  the driver core in here as well, the shortlog has the details.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "driver-core: platform: probe of-devices only using list of compatibles"
  firmware: qemu config needs I/O ports
  firmware: qemu_fw_cfg.c: fix typo FW_CFG_DATA_OFF
  driver-core: platform: probe of-devices only using list of compatibles
  driver-core: platform: fix typo in documentation for multi-driver helper
  component: remove impossible condition
  drivers: dma-coherent: simplify dma_init_coherent_memory return value
  devicetree: update documentation for fw_cfg ARM bindings
  firmware: create directory hierarchy for sysfs fw_cfg entries
  firmware: introduce sysfs driver for QEMU's fw_cfg device
  kobject: export kset_find_obj() for module use
  driver core: bus: use to_subsys_private and to_device_private_bus
  driver core: bus: use list_for_each_entry*
  debugfs: Add stub function for debugfs_create_automount().
  kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[]

Pull VFIO updates from Alex Williamson:
 "Various enablers for assignment of Intel graphics devices and future
  support of vGPU devices (Alex Williamson).  This includes

   - Handling the vfio type1 interface as an API rather than a specific
     implementation, allowing multiple type1 providers.

   - Capability chains, similar to PCI device capabilities, that allow
     extending ioctls.  Extensions here include device specific regions
     and sparse mmap descriptions.  The former is used to expose non-PCI
     regions for IGD, including the OpRegion (particularly the Video
     BIOS Table), and read only PCI config access to the host and LPC
     bridge as drivers often depend on identifying those devices.

     Sparse mmaps here are used to describe the MSIx vector table, which
     vfio has always protected from mmap, but never had an API to
     explicitly define that protection.  In future vGPU support this is
     expected to allow the description of PCI BARs that may mix direct
     access and emulated access within a single region.

   - The ability to expose the shadow ROM as an option ROM as IGD use
     cases may rely on the ROM even though the physical device does not
     make use of a PCI option ROM BAR"

* tag 'vfio-v4.6-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: return -EFAULT if copy_to_user fails
  vfio/pci: Expose shadow ROM as PCI option ROM
  vfio/pci: Intel IGD host and LCP bridge config space access
  vfio/pci: Intel IGD OpRegion support
  vfio/pci: Enable virtual register in PCI config space
  vfio/pci: Add infrastructure for additional device specific regions
  vfio: Define device specific region type capability
  vfio/pci: Include sparse mmap capability for MSI-X table regions
  vfio: Define sparse mmap capability for regions
  vfio: Add capability chain helpers
  vfio: Define capability chains
  vfio: If an IOMMU backend fails, keep looking
  vfio/pci: Fix unsigned comparison overflow

Pull HSI updates from Sebastian Reichel:
 "nokia-modem: add N950 and N9 support"

* tag 'hsi-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: ssi-protocol: Use handshake logic from n950
  HSI: nokia-modem: add n950 and n9 support

Pull power supply and reset changes from Sebastian Reichel:
 - add types for USB Type C and PD chargers
 - add act8945a charger driver
 - add ACPI/DT bindings for goldfish-battery
 - add support for versatile reset controller
 - misc fixes

* tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (24 commits)
  power: pm2301-charger: use __maybe_unused to hide pm functions
  power: ipaq-micro-battery: use __maybe_unused to hide pm functions
  power_supply: 88pm860x_charger: do not pass NULL to power_supply_put
  jz4740-battery: Correct voltage change check
  power_supply: lp8788-charger: initialize boolean 'found'
  goldfish: Enable ACPI-based enumeration for goldfish battery
  power: goldfish_battery: add devicetree bindings
  power: act8945a: add charger driver for ACT8945A
  power: add documentation for ACT8945A's charger DT bindings
  ARM: dts: n900: Rename isp1704 to isp1707 to match correct name
  power_supply: bq27xxx_battery: Add of modalias and match table when CONFIG_OF is enabled
  power_supply: bq2415x_charger: Add of modalias and match table when CONFIG_OF is enabled
  power_supply: bq2415x_charger: Do not add acpi modalias when CONFIG_ACPI is not enabled
  power_supply: isp1704_charger: Add compatible of match for nxp,isp1707
  power_supply: isp1704_charger: Error messages when probe fail
  power_supply: Add types for USB Type C and PD chargers
  power: bq24735-charger: add 'ti,external-control' option
  power: bq24735-charger: document 'ti,external-control' option
  power: bq24735-charger: fix failed i2c with ac-detect
  power: reset: Fix dependencies for !HAS_IOMEM archs
  ...

Pull dmaengine updates from Vinod Koul:
 "This is smallish update with minor changes to core and new driver and
  usual updates.  Nothing super exciting here..

   - We have made slave address as physical to enable driver to do the
     mapping.

   - We now expose the maxburst for slave dma as new capability so
     clients can know this and program accordingly

   - addition of device synchronize callbacks on omap and edma.

   - pl330 updates to support DMAFLUSHP for Rockchip platforms.

   - Updates and improved sg handling in Xilinx VDMA driver.

   - New hidma qualcomm dma driver, though some bits are still in
     progress"

* tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
  dmaengine: IOATDMA: revise channel reset workaround on CB3.3 platforms
  dmaengine: add Qualcomm Technologies HIDMA channel driver
  dmaengine: add Qualcomm Technologies HIDMA management driver
  dmaengine: hidma: Add Device Tree binding
  dmaengine: qcom_bam_dma: move to qcom directory
  dmaengine: tegra: Move of_device_id table near to its user
  dmaengine: xilinx_vdma: Remove unnecessary variable initializations
  dmaengine: sirf: use __maybe_unused to hide pm functions
  dmaengine: rcar-dmac: clear pertinence number of channels
  dmaengine: sh: shdmac: don't open code of_device_get_match_data()
  dmaengine: tegra: don't open code of_device_get_match_data()
  dmaengine: qcom_bam_dma: Make driver work for BE
  dmaengine: sun4i: support module autoloading
  dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo
  dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's
  dmaengine: xilinx_vdma: Simplify spin lock handling
  dmaengine: xilinx_vdma: Fix issues with non-parking mode
  dmaengine: xilinx_vdma: Improve SG engine handling
  dmaengine: pl330: fix to support the burst mode
  dmaengine: make slave address physical
  ...

Pull remoteproc updates from Bjorn Andersson:
 "New driver for controlling ST's remote processors and a couple of
  minor fixes.  Also includes the addition of myself as co-maintainer"
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>

* tag 'rproc-v4.6' of git://github.com/andersson/remoteproc:
  MAINTAINERS: Add co-maintainer for remoteproc subsystems
  remoteproc: Supply controller driver for ST's Remote Processors
  remoteproc: debugfs: Add ability to boot remote processor using debugfs
  remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
  remoteproc: debugfs: Return error on invalid 'count' value
  remoteproc/wkup_m3: Use MODULE_DEVICE_TABLE to export alias
  remoteproc: report error if resource table doesn't exist

Pul documentation update from Jon Corbet:
 "Another relatively boring cycle for the docs tree: typo fixes,
  translation updates, etc"

* tag 'docs-for-linus' of git://git.lwn.net/linux:
  modsign: Fix documentation on module signing enforcement parameter.
  Doc: nfs: Fix typos in Documentation/filesystems/nfs
  Documentation: kselftest: Remove duplicate word
  doc: fix grammar
  Documentation: Howto: Fixed subtitles style
  Doc: ARM: Fix a typo in clksrc-change-registers.awk
  Documentation/ko_KR: update maintainer information
  Documentation: Fix int/unsigned int comparison
  Documentation: Chinese translation of arm64/silicon-errata.txt
  Documentation:Update Documentation/zh_CN/arm64/booting.txt
  Documentation: HOWTO: remove obsolete info about regression postings
  Doc: ja_JP: Fix a typo in HOWTO
  Doc: i2c: Fix typo in Documentation/i2c
  Doc: DocBook: Fix a typo in device-drivers.tmpl
  Remove "arch" usage in Documentation/features/list-arch.sh
  README: cosmetic fixes
  Documentation/CodingStyle: add space before parenthesis in example macro
  SubmittingPatches: fix spelling of "git send-email"

Pull security layer updates from James Morris:
 "There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
  fixes scattered across the subsystem.

  IMA now requires signed policy, and that policy is also now measured
  and appraised"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
  X.509: Make algo identifiers text instead of enum
  akcipher: Move the RSA DER encoding check to the crypto layer
  crypto: Add hash param to pkcs1pad
  sign-file: fix build with CMS support disabled
  MAINTAINERS: update tpmdd urls
  MODSIGN: linux/string.h should be #included to get memcpy()
  certs: Fix misaligned data in extra certificate list
  X.509: Handle midnight alternative notation in GeneralizedTime
  X.509: Support leap seconds
  Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
  X.509: Fix leap year handling again
  PKCS#7: fix unitialized boolean 'want'
  firmware: change kernel read fail to dev_dbg()
  KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
  KEYS: Reserve an extra certificate symbol for inserting without recompiling
  modsign: hide openssl output in silent builds
  tpm_tis: fix build warning with tpm_tis_resume
  ima: require signed IMA policy
  ima: measure and appraise the IMA policy itself
  ima: load policy using path
  ...

Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.6:

  API:
   - Convert remaining crypto_hash users to shash or ahash, also convert
     blkcipher/ablkcipher users to skcipher.
   - Remove crypto_hash interface.
   - Remove crypto_pcomp interface.
   - Add crypto engine for async cipher drivers.
   - Add akcipher documentation.
   - Add skcipher documentation.

  Algorithms:
   - Rename crypto/crc32 to avoid name clash with lib/crc32.
   - Fix bug in keywrap where we zero the wrong pointer.

  Drivers:
   - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
   - Add PIC32 hwrng driver.
   - Support BCM6368 in bcm63xx hwrng driver.
   - Pack structs for 32-bit compat users in qat.
   - Use crypto engine in omap-aes.
   - Add support for sama5d2x SoCs in atmel-sha.
   - Make atmel-sha available again.
   - Make sahara hashing available again.
   - Make ccp hashing available again.
   - Make sha1-mb available again.
   - Add support for multiple devices in ccp.
   - Improve DMA performance in caam.
   - Add hashing support to rockchip"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
  crypto: qat - remove redundant arbiter configuration
  crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
  crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
  crypto: qat - Change the definition of icp_qat_uof_regtype
  hwrng: exynos - use __maybe_unused to hide pm functions
  crypto: ccp - Add abstraction for device-specific calls
  crypto: ccp - CCP versioning support
  crypto: ccp - Support for multiple CCPs
  crypto: ccp - Remove check for x86 family and model
  crypto: ccp - memset request context to zero during import
  lib/mpi: use "static inline" instead of "extern inline"
  lib/mpi: avoid assembler warning
  hwrng: bcm63xx - fix non device tree compatibility
  crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
  crypto: qat - The AE id should be less than the maximal AE number
  lib/mpi: Endianness fix
  crypto: rockchip - add hash support for crypto engine in rk3288
  crypto: xts - fix compile errors
  crypto: doc - add skcipher API documentation
  crypto: doc - update AEAD AD handling
  ...

Merge branches 'for-4.5/upstream-fixes', 'for-4.6/cmedia', 'for-4.6/i2c-hid', 'for-4.6/logitech', 'for-4.6/multitouch', 'for-4.6/penmount', 'for-4.6/sony', 'for-4.6/thingm', 'for-4.6/upstream' and 'for-4.6/wacom' into for-linus

Remove the livepatch module notifier in favor of directly enabling and
disabling patches to modules in the module loader. Hard-coding the
function calls ensures that ftrace_module_enable() is run before
klp_module_coming() during module load, and that klp_module_going() is
run before ftrace_release_mod() during module unload. This way, ftrace
and livepatch code is run in the correct order during the module
load/unload sequence without dependence on the module notifier call chain.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Put all actions in complete_formation() that are performed after
module->state is set to MODULE_STATE_COMING into a separate function
prepare_coming_module(). This split prepares for the removal of the
livepatch module notifiers in favor of hard-coding function calls to
klp_module_{coming,going} in the module loader.

The complete_formation -> prepare_coming_module split will also make error
handling easier since we can jump to the appropriate error label to do any
module GOING cleanup after all the COMING-actions have completed.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit a101ad94.

Pull fbdev updates from Tomi Valkeinen:

 - Miscallaneous small fixes to various fbdev drivers

 - Remove fb_rotate, which was never used

 - pmag fb improvements

* tag 'fbdev-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (21 commits)
  xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
  video: fbdev: sis: remove unused variable
  drivers/video: make fbdev/sunxvr2500.c explicitly non-modular
  drivers/video: make fbdev/sunxvr1000.c explicitly non-modular
  drivers/video: make fbdev/sunxvr500.c explicitly non-modular
  video: exynos: fix modular build
  fbdev: da8xx-fb: fix videomodes of lcd panels
  fbdev: kill fb_rotate
  video: fbdev: bt431: Correct cursor format control macro
  video: fbdev: pmag-ba-fb: Optimize Bt455 colormap addressing
  video: fbdev: pmag-ba-fb: Fix and rework Bt455 colormap handling
  video: fbdev: bt455: Remove unneeded colormap helpers for cursor support
  video: fbdev: pmag-aa-fb: Report video timings
  video: fbdev: pmag-aa-fb: Enable building as a module
  video: fbdev: pmag-aa-fb: Adapt to current APIs
  video: fbdev: pmag-ba-fb: Fix the lower margin size
  fbdev: sh_mobile_lcdc: Use ARCH_RENESAS
  fbdev: n411: check return value
  fbdev: exynos: fix IS_ERR_VALUE usage
  video: Use bool instead int pointer for get_opt_bool() argument
  ...

Pull media updates from Mauro Carvalho Chehab:
 - Added support for some new video formats
 - mn88473 DVB frontend driver got promoted from staging
 - several improvements at the VSP1 driver
 - several cleanups and improvements at the Media Controller
 - added Media Controller support to snd-usb-audio.  Currently, enabled
   only for au0828-based V4L2/DVB boards
 - Several improvements at nuvoton-cir: it now supports wake up codes
 - Add media controller support to em28xx and saa7134 drivers
 - coda driver now accepts NXP distributed firmware files
 - Some legacy SoC camera drivers will be moving to staging, as they're
   outdated and nobody so far is willing to fix and convert them to use
   the current media framework
 - As usual, lots of cleanups, improvements and new board additions.

* tag 'media/v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (381 commits)
  media: au0828 disable tuner to demod link in au0828_media_device_register()
  [media] touptek: cast char types on %x printk
  [media] touptek: don't DMA at the stack
  [media] mceusb: use %*ph for small buffer dumps
  [media] v4l: exynos4-is: Drop unneeded check when setting up fimc-lite links
  [media] v4l: vsp1: Check if an entity is a subdev with the right function
  [media] hide unused functions for !MEDIA_CONTROLLER
  [media] em28xx: fix Terratec Grabby AC97 codec detection
  [media] media: add prefixes to interface types
  [media] media: rc: nuvoton: switch attribute wakeup_data to text
  [media] v4l2-ioctl: fix YUV422P pixel format description
  [media] media: fix null pointer dereference in v4l_vb2q_enable_media_source()
  [media] v4l2-mc.h: fix yet more compiler errors
  [media] staging/media: add missing TODO files
  [media] media.h: always start with 1 for the audio entities
  [media] sound/usb: Use meaninful names for goto labels
  [media] v4l2-mc.h: fix compiler warnings
  [media] media: au0828 audio mixer isn't connected to decoder
  [media] sound/usb: Use Media Controller API to share media resources
  [media] dw2102: add support for TeVii S662
  ...

Pull libnvdimm updates from Dan Williams:

 - Asynchronous address range scrub:

     Given the capacities of next generation persistent memory devices a
     scrub operation to find all poison may take 10s of seconds.  We
     want this scrub work to be done asynchronously with the rest of
     system initialization, so we move it out of line from the NFIT
     probing, i.e. acpi_nfit_add().

 - Clear poison:

     ACPI 6.1 introduces the ability to send "clear error" commands to
     the ACPI0012:00 device representing the root of an "nvdimm bus".
     Similar to relocating a bad block on a disk, this support clears
     media errors in response to a write.

 - Persistent memory resource tracking:

     A persistent memory range may be designated as simply "reserved" by
     platform firmware in the efi/e820 memory map.  Later when the NFIT
     driver loads it discovers that the range is "Persistent Memory".

     The NFIT bus driver inserts a resource to advertise that
     "persistent" attribute in the system resource tree for /proc/iomem
     and kernel-internal usages.

 - Miscellaneous cleanups and fixes:

     Workaround section misaligned pmem ranges when allocating a struct
     page memmap, fix handling of the read-only case in the ioctl path,
     and clean up block device major number allocation.

* tag 'libnvdimm-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
  libnvdimm, pmem: clear poison on write
  libnvdimm, pmem: fix kmap_atomic() leak in error path
  nvdimm/btt: don't allocate unused major device number
  nvdimm/blk: don't allocate unused major device number
  pmem: don't allocate unused major device number
  ACPI: Change NFIT driver to insert new resource
  resource: Export insert_resource and remove_resource
  resource: Add remove_resource interface
  resource: Change __request_region to inherit from immediate parent
  libnvdimm, pmem: fix ia64 build, use PHYS_PFN
  nfit, libnvdimm: clear poison command support
  libnvdimm, pfn: 'resource'-address and 'size' attributes for pfn devices
  libnvdimm, pmem: adjust for section collisions with 'System RAM'
  libnvdimm, pmem: fix 'pfn' support for section-misaligned namespaces
  libnvdimm: Fix security issue with DSM IOCTL.
  libnvdimm: Clean-up access mode check.
  tools/testing/nvdimm: expand ars unit testing
  nfit: disable userspace initiated ars during scrub
  nfit: scrub and register regions in a workqueue
  nfit, libnvdimm: async region scrub workqueue
  ...

Pull device mapper updates from Mike Snitzer:

 - Most attention this cycle went to optimizing blk-mq request-based DM
   (dm-mq) that is used exclussively by DM multipath:

     - A stable fix for dm-mq that eliminates excessive context
       switching offers the biggest performance improvement (for both
       IOPs and throughput).

     - But more work is needed, during the next cycle, to reduce
       spinlock contention in DM multipath on large NUMA systems.

 - A stable fix for a NULL pointer seen when DM stats is enabled on a DM
   multipath device that must requeue an IO due to path failure.

 - A stable fix for DM snapshot to disallow the COW and origin devices
   from being identical.  This amounts to graceful failure in the face
   of userspace error because these devices shouldn't ever be identical.

 - Stable fixes for DM cache and DM thin provisioning to address crashes
   seen if/when their respective metadata device experiences failures
   that cause the transition to 'fail_io' mode.

 - The DM cache 'mq' policy is now an alias for the 'smq' policy.  The
   'smq' policy proved to be consistently better than 'mq'.  As such
   'mq', with all its complex user-facing tunables, has been eliminated.

 - Improve DM thin provisioning to consistently return -ENOSPC once the
   thin-pool's data volume is out of space.

 - Improve DM core to properly handle error propagation if
   bio_integrity_clone() fails in clone_bio().

 - Other small cleanups and improvements to DM core.

* tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (41 commits)
  dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
  dm thin: consistently return -ENOSPC if pool has run out of data space
  dm cache: bump the target version
  dm cache: make sure every metadata function checks fail_io
  dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIO
  dm cache policy smq: clarify that mq registration failure was for 'mq'
  dm: return error if bio_integrity_clone() fails in clone_bio()
  dm thin metadata: don't issue prefetches if a transaction abort has failed
  dm snapshot: disallow the COW and origin devices from being identical
  dm cache: make the 'mq' policy an alias for 'smq'
  dm: drop unnecessary assignment of md->queue
  dm: reorder 'struct mapped_device' members to fix alignment and holes
  dm: remove dummy definition of 'struct dm_table'
  dm: add 'dm_numa_node' module parameter
  dm thin metadata: remove needless newline from subtree_dec() DMERR message
  dm mpath: cleanup reinstate_path() et al based on code review
  dm mpath: remove __pgpath_busy forward declaration, rename to pgpath_busy
  dm mpath: switch from 'unsigned' to 'bool' for flags where appropriate
  dm round robin: use percpu 'repeat_count' and 'current_path'
  dm path selector: remove 'repeat_count' return from .select_path hook
  ...

Pull SCSI updates from James Bottomley:
 "This pull includes driver updates from the usual suspects (stex, hpsa,
  ncr5380, scsi_dh, qla2xxx, be2iscsi, hisi_sas, cxlflash, aacraid,
  mp3sas, megaraid_sas, ibmvscsi, ufs) plus an assortment of
  miscellaneous fixes.

  The major user visible change of this pull is that we've moved from
  monotonically increasing host number to an ida allocated one (meaning
  the numbers get re-used) because someone managed to wrap the count in
  an iscsi system.  We don't believe there will be any adverse
  consequences of this"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (230 commits)
  MAINTAINERS: use new email address for James Bottomley
  mpt3sas: Remove unnecessary synchronize_irq() before free_irq()
  sg: fix dxferp in from_to case
  cxlflash: Increase cmd_per_lun for better throughput
  cxlflash: Fix to avoid unnecessary scan with internal LUNs
  cxlflash: Reorder user context initialization
  cxlflash: Simplify attach path error cleanup
  cxlflash: Split out context initialization
  cxlflash: Unmap problem state area before detaching master context
  cxlflash: Simplify PCI registration
  scsi: storvsc: fix SRB_STATUS_ABORTED handling
  be2iscsi: set the boot_kset pointer to NULL in case of failure
  sd: Fix discard granularity when LBPRZ=1
  be2iscsi: Remove unnecessary synchronize_irq() before free_irq()
  scsi_sysfs: call 'device_add' after attaching device handler
  scsi_dh_emc: update 'access_state' field
  scsi_dh_rdac: update 'access_state' field
  scsi_dh_alua: update 'access_state' field
  scsi_dh_alua: use common definitions for ALUA state
  scsi: Add 'access_state' and 'preferred_path' attribute
  ...

Pull iscsi_ibft update from Konrad Rzeszutek Wilk:
 "A simple patch that had been rattling around in SuSE repo"

* 'stable/for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  iscsi_ibft: Add prefix-len attr and display netmask

Seth and Vojtech are no longer active maintainers of livepatch, so
remove them in favor of Jessica and Miroslav.

Also add Petr as a designated reviewer.

[jikos@kernel.org: Petr is the only one affected who hasn't provided his
 Ack by the time this patch has been applied, as he is offline curently;
 but I hereby assert that I've talked to him and he's OK with this change]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Seth Jennings <sjenning@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...